Waveguide-Coupled Light Photodetector Based on Two-Dimensional Molybdenum Disulfide.

The integration of transition metal dichalcogenides with photonic structures such as sol-gel SiOx:TiOy optical waveguides (WGs) makes possible the fabrication of photonic devices with the desired characteristics in the visible spectral range. In this study, we propose and experimentally demonstrate a MoS2-based photodetector integrated with a sol-gel SiOx:TiOy WG. Based on the spectroscopic measurements performed for our device, we concluded that the light entering the WG is almost completely channeled out from the WG and absorbed by the MoS2 flake, which is deposited on the WG. Therefore, this device works as a photodetector. The light coupling into the MoS2 region in this device construction is due to the high contrast of refractive index between the van der Waals crystal and the sol-gel WG, which is ∼4 and ∼1.8, respectively. The obtained MoS2-based photodetectors exhibit a photoresponsivity of 0.3 A W-1 (n-type MoS2) and 7.53 mA W-1 (p-type MoS2) at a bias voltage of 2 V. These results reveal great potential in the integration of sol-gel WGs with van der Waals crystals in optoelectronic applications.

Ceramic surface relief gratings imprinted on an optical fiber tip.

We report on the fabrication, experimental measurement, and numerical simulation of sol-gel diffraction grating structures deposited on the end-face of a single mode optical fiber. Using the imprint method, we manufactured surface relief grating structures in four configurations with different grating-relative-to-fiber arrangements. We demonstrate the high quality of the fabricated structures based on atomic force microscopy imaging and their operational characteristics, presenting measured and simulated far-field intensity distributions. Using a numerical model, we simulated the diffraction patterns in the far-field. We obtained strong agreement between the results of the simulations and the experiments in terms of the angular positions of the diffraction peaks. We also investigated the tolerance of fabricated structures to high-power lasers. Among the proposed structures, the most intriguing is the grism fabricated on a fiber end-face using sol-gel imprint technology for the first time, to the best of our knowledge.