Bone regeneration with hydroxyapatite particles loaded in photo-cross-linkable hydrogel: An experimental study.

This study explores the use of in situ cross-linked hyaluronic acid methacryloyl (HAMA) and hydroxyapatite particles (HAP) for bone defect repair. Human periodontal ligament stem cells (PDLSCs) were isolated and co-cultured with the HAMA-HAP composite. Osteogenic differentiation was evaluated using Alizarin Red staining, alkaline phosphatase activity quantification, and polymerase chain reaction (PCR). A cranial defect was induced in Sprague-Dawley rats. This defect was then filled with the HAMA-HAP composite and cross-linked using UV light exposure. Bone formation was assessed through radiographic and histological analyses. The HAMA-HAP composite was found to promote cell viability similarly to pure HAP. It also enhanced gene expression of ALP, OPN, and Runx2, and increased ALP activity and mineralized nodule formation in vitro. Micro-CT scans showed defect restoration in the HAMA-HAP and HAP groups compared to the control group. The HAMA-HAP group exhibited higher Tb.N, Tb.Sp, Tb.Th, and BV/TV. Masson staining showed the HAMA-HAP composite restored the defect site, with new bone formation thicker than in the HAP group. The HAMA-HAP composite showed excellent biocompatibility and promoted osteogenic differentiation of PDLSCs. It effectively repaired cranial defects, indicating its potential for clinical use in bone defect repair.

Modified Le Fort I interpositional grafting of the severe atrophied maxilla-a retrospective study of 106 patients over 10 years.

OBJECTIVES: The objective of this study was to evaluate a modified Le Fort I interpositional grafting followed by dental implants for the rehabilitation of edentulous atrophied maxillae (Cawood classes IV and V). The surgical modification was a bilateral sinus floor augmentation prior to the osteotomy. This generated a closed recipient bed which allowed the use of particulated bone grafts (xenogenic bone mineral) and a reduced amount of autologous iliac bone grafts. MATERIALS AND METHODS: A total of 106 patients with maxillary interpositional bone grafts were included in this retrospective analysis between 2006 and 2020. The panoramic radiographs and lateral cephalograms were analyzed to assess the gain and stability of the maxillary bone and the peri-implant bone loss. In addition, the observational period of up to 14 years implant survival and success was evaluated. RESULTS: A stable vertical bone height with mean 0.63 ± 1.41 mm resorption over 5 years after implant loading was observed. A mean of 0.20 ± 0.37 mm marginal bone loss was noted after 5 years. The implant survival was 96.4% after 5 years and implant success can be rated 91.7% in a mean follow-up period of 93 months and 168 months maximal observation time. Perioperative complications included sinus membrane perforation (59.43%), wound healing disturbances (25.47%), and transient primary complications (13.78%). All receded apart from two subtotal graft losses (1.8%). CONCLUSIONS: The modified Le Fort I osteotomy with interpositional bone grafts is a predictable procedure in terms of bone and implant stability. Patients with atrophic maxillae who are fit for surgery should be informed about risks and benefits of this treatment alternative.

Prefabricated 3D-Printed Tissue-Engineered Bone for Mandibular Reconstruction: A Preclinical Translational Study in Primate.

The advent of three dimensionally (3D) printed customized bone grafts using different biomaterials has enabled repairs of complex bone defects in various in vivo models. However, studies related to their clinical translations are truly limited. Herein, 3D printed poly(lactic-co-glycolic acid)/ß-tricalcium phosphate (PLGA/TCP) and TCP scaffolds with or without recombinant bone morphogenetic protein -2 (rhBMP-2) coating were utilized to repair primate's large-volume mandibular defects and compared efficacy of prefabricated tissue-engineered bone (PTEB) over direct implantation (without prefabrication). 18F-FDG PET/CT was explored for real-time monitoring of bone regeneration and vascularization. After 3-month's prefabrication, the original 3D-architecture of the PLGA/TCP-BMP scaffold was found to be completely lost, while it was properly maintained in TCP-BMP scaffolds. Besides, there was a remarkable decrease in the PLGA/TCP-BMP scaffold density and increase in TCP-BMP scaffolds density during ectopic (within latissimus dorsi muscle) and orthotopic (within mandibular defect) implantation, indicating regular bone formation with TCP-BMP scaffolds. Notably, PTEB based on TCP-BMP scaffold was successfully fabricated with pronounced effects on bone regeneration and vascularization based on radiographic, 18F-FDG PET/CT, and histological evaluation, suggesting a promising approach toward clinical translation.

Accuracy of Implant Placement Guided with Surgical Template: An In Vitro and In Vivo Study.

This study evaluated the accuracy of implant placement with surgical-template guidance both in vitro and in vivo. Virtual surgical planning was performed based on the data from CBCT scans and an intraoral scanner. Surgical templates were designed according to the planned implants and manufactured with stereolithography. In vitro, 60 implants were placed in 15 resin models. In vivo, 74 implants were placed in 54 patients. The implants were scanned with CBCT postoperatively. Implant accuracy was evaluated by measuring the following parameters: central deviation at the apex and shoulder, horizontal deviation at the apex and shoulder, vertical deviation at the apex and shoulder, and angular deviation. There were statistically significant in vitro and in vivo deviations for all parameters, and the implant deviations in vivo were significantly greater than those in vitro. When using a mucosa-supported template, horizontal deviations at the apex were significantly greater than when a teeth-supported template was used. Within the limitation of the study design, inaccuracy existed in implant placement guided with a surgical template. More studies are needed to investigate the value of the procedure in future.

Comparison of the accuracy of dental implant placement using static and dynamic computer-assisted systems: an in vitro study.

OBJECTIVES: The study aimed to compare the accuracy of implant placement between static and dynamic computer-assisted systems (CAS) in a partially edentulous mandible model. MATERIALS & METHODS: A total of 80 implants was placed in mandible models. The implants were placed using either static or dynamic computer-assisted system. Deviations of implant hex, apex and angulation were measured between preoperative planning and postoperative CBCT in planning software. RESULTS: The mean deviations of implant hex, apex and angulation in static CAS group were 1.15 ± 0.34 mm, 1.37 ± 0.38 mm and 2.60 ± 1.11 degree, while in dynamic CAS group were 0.40 ± 0.41 mm, 0.34 ± 0.33 mm and 0.97 ± 1.21 degree, respectively. Implant placement with dynamic CAS showed less deviations of shoulder, apex and angulation than with static CAS significantly. CONCLUSIONS: The implant accuracy using CAS system could be influenced by the guiding technique.

Hydroxyapatite-incorporation improves bone formation on endosseous PEEK implant in canine tibia.

BACKGROUND: Poly Ether Ether Ketone (PEEK) has been considered as a potential alternative material for endosseous dental implants, for its low elastic modulus, biocompatibility, and low cost in customized device manufacture. Hydroxyapatite-incorporation is supposed to improve the poor osseointegration of PEEK. METHODS: In the present study we analyzed the in vivo response of hydroxyapatite-incorporated PEEK (PEEK-HA) implants in canine tibia. PEEK-HA and PEEK implants were implanted and were examined 4 weeks and 12 weeks after implantation with radiology and histology. Commercial titanium dental implants served as controls. RESULTS: The ratio of bone volume to tissue volume of PEEK-HA implants was higher than that of PEEK implants 4 weeks after implantation in the µ-CT analysis. The bone implant contact of PEEK and PEEK-HA implants showed no statistical difference in the histological examination, but newly-formed bone around PEEK-HA implants showed more signs of mineralization than that around PEEK implants. CONCLUSION: The study suggested that bone formation was improved with hydroxyapatite-incorporation in PEEK. Hydroxyapatite-incorporated PEEK implants may represent a potential material for endosseous dental implant.

Dental implant location via surface scanner: a pilot study.

PURPOSE: Implant location is performed after placement to verify that the safety of neighboring anatomic structure and the realizability of prosthetic plan. Routine postoperative location is based on radiological scanning and raises the concerns on radiation exposure and inconveniency in practice. In the present study a location method based on surface scanning was introduced and the accuracy of this method was assessed in vitro. MATERIAL AND METHODS: A total of 40 implants were placed in 10 resin mandible models. The models were scanned with intraoral scanner (IS group) and extraoral scanner (ES group). The implant position was located with fusing the images of surface scanning and cone beam computerized tomography (CBCT) after implant placement. Deviations were measured between positions located by surface scanner and postoperative CBCT with the parameters: central deviation at apex (cda), central deviation at hex (cdh), horizontal deviation at apex (hda), horizontal deviation at hex (hdh), vertical deviation at apex (vda), vertical deviation at hex (vdh) and angular deviation (ad). RESULTS: In IS group, the mean value of cda, cdh, hda, hdh, vda, vdh and ad was 0.27 mm, 0.23 mm, 0.12 mm, 0.10 mm, 0.21 mm, 0.19 mm and 0.72°, respectively. In ES group, the mean value of cda, cdh, hda, hdh, vda, vdh and ad was 0.28 mm, 0.25 mm 0.14 mm, 0.11 mm, 0.22 mm, 0.20 mm and 0.68°, respectively. The implant deviations in IS and ES groups were of no significant difference for any of the measurements. CONCLUSIONS: Dental implant can be located via surface scanner with acceptable accuracy for postoperative verification. Further clinical investigation is needed to assess the feasibility of the method.

LAPTM5 is transactivated by RUNX2 and involved in RANKL trafficking in osteoblastic cells.

The present study aimed to investigate the role of lysosomal­associated transmembrane protein 5 (LAPTM5) in osteoclast differentiation induced by osteoblasts. The results demonstrated that the expression levels of LAPTM5 were downregulated following runt­related transcription factor 2 (RUNX2) silencing and upregulated following RUNX2 overexpression in ST2 cells. Chromatin immunoprecipitation analysis identified the binding of RUNX2 to the LAPTM5 promoter at the ­1176 to ­1171 position. Dual­luciferase reporter assays confirmed that RUNX2 directly activated the LAPTM5 gene. The concentration of receptor activator of nuclear factor­κB ligand (RANKL) protein in the cytoplasm and in the media was significantly increased following LAPTM5 knockdown. LAPTM5 silencing in ST2 cells enhanced osteoclastic differentiation of co­cultured RAW264.7 cells. The present study indicated that expression of LAPTM5 was regulated by the interaction of RUNX2 with its promoter region and that LAPTM5 was involved in the trafficking of RANKL. These findings suggested a possible coupling mechanism between osteogenesis and osteoclastogenesis in which RUNX2 may be involved in osteoclast differentiation through the regulation of the lysosome­associated genes that modulate RANKL expression.

Sandwich osteotomy in atrophic mandibles: A retrospective study with a 2- to 144-month follow-up.

OBJECTIVES: The aim of the present retrospective study was to assess the long-term clinical outcome of sandwich osteotomy in pre-implant augmentation of atrophic mandible. MATERIALS AND METHODS: Sandwich osteotomies were performed in partially and fully edentulous mandibles of 63 consecutive patients in the present study. The vertical bone gain, graft stability, and marginal bone loss were measured radiographically. Implant survival and success rates were estimated in the follow-up ranged from 2 to 144 months (mean, 58 months). RESULTS: A total of 75 procedures were reviewed. After an average healing time of 148 days, 220 implants were placed in 74 procedures. Perioperative complications included intraoperative fracture (1/75), transient paresthesia (18/75), wound healing disturbance (18/75), and keratinized tissue deficiency (14/75). The average vertical bone gain was 5.4 mm at the time of implant placement. Significant marginal bone loss occurred during the first 6 months, after which the resorption remained stable. The implant survival rate was estimated as 96.7%, and the success rate was 95.3%. Implant survival and success showed no significant correlation with higher age, anticoagulation therapy, cardiovascular disease, or thyroid disorder. Smoking was correlated with significant lower success rate. CONCLUSION: Sandwich osteotomy is a suitable augmentation procedure for atrophic mandible, allowing for implant placement with promising outcome.

Particulate Coral Hydroxyapatite Sheltered by Titanium Mesh for Localized Alveolar Rehabilitation After Onlay Graft Failure: A Case Report.

Reconstruction of bone loss in the alveolar ridge has long been challenging. Autologous bone grafts are considered as the "golden standard," while little research has focused on how to repair pronounced alveolar bone defects after autologous bone graft failure. The aim of this study was to detail a method based on the titanium mesh technique coupled with particulate coral hydroxyapatite to solve the onlay graft failure. With bone deficiency in the No. 11 and No. 24-25 regions, we harvested 2 autologous bone blocks for reconstruction. Two weeks after transplantation, the graft in the No. 11 region had healed uneventfully, while the graft in the anterior mandible became infected because of soft tissue dehiscence. After removal of the failed autologous bone block, pure coral hydroxyapatite stabilized within titanium mesh was used for alveolar rehabilitation. Six months later, the width of the local alveolar bone was evaluated. After the titanium mesh was removed, a biopsy was performed to study bone regeneration by micro computerized tomography and histology, following by a standard Straumann implant insertion. Although there was wound dehiscence 14 days after bone augmentation, repeated local rinsing and anti-inflammation therapy controlled the inflammatory reaction. The total horizontal bone gain was 4.2 ± 0.5 mm. Micro computerized tomography revealed that the closer the coral hydroxyapatite was to the host bone, the more was resorbed and the more bone regenerated. Histology showed mature lamellar bone structures, with evident residual coral hydroxyapatite. A 3-year follow-up revealed stable bone around the dental implant and successful function of the implant-born prosthesis. This study proposes that the method of particulate coral hydroxyapatite sheltered by titanium mesh is a promising solution in handling alveolar bone augmentation failure. More cases are needed for further research to form an efficient treatment procedure.

Magnitude-dependent response of osteoblasts regulated by compressive stress.

The present study aimed to investigate the role of magnitude in adaptive response of osteoblasts exposed to compressive stress. Murine primary osteoblasts and MC3T3-E1 cells were exposed to compressive stress (0, 1, 2, 3, 4, and 5 g/cm2) in 3D culture. Cell viability was evaluated, and expression levels of Runx2, Alp, Ocn, Rankl, and Opg were examined. ALP activity in osteoblasts and TRAP activity in RAW264.7 cells co-cultured with MC3T3-E1 cells were assayed. Results showed that compressive stress within 5.0 g/cm2 did not influence cell viability. Both osteoblastic and osteoblast-regulated osteoclastic differentiation were enhanced at 2 g/cm2. An increase in stress above 2 g/cm2 did not enhance osteoblastic differentiation further but significantly inhibited osteoblast-regualted osteoclastic differentiation. This study suggested that compressive stress regulates osteoblastic and osteoclastic differentiation through osteoblasts in a magnitude-dependent manner.