RESUMEN
This case report describes the treatment of a 9-year-old boy with impacted maxillary central incisors due to 2 supernumerary teeth. A sequential approach comprising of surgical removal of the supernumerary teeth and 2 stages of surgical exposure and orthodontic traction of the impacted teeth resulted in correct repositioning of incisors. Close monitoring and multidisciplinary cooperation during various stages of treatment led to a successful esthetic outcome, with optimal periodontal health and functional occlusion.
RESUMEN
The main goals of treatment of dentofacial deformities are to achieve optimal esthetics and ideal functional occlusion. The conventional orthognathic surgical approach includes a long presurgical orthodontic phase, which takes about 18 months. During this phase, the patients' appearance is deteriorated and their motivation to continue treatment significantly decreases. In the surgery first approach (SFA), orthognathic surgery is performed prior to orthodontic treatment, and orthodontic treatment is performed postoperatively to improve dental occlusion and for final settling. The SFA has two main advantages namely shortening of treatment period, and early improvement of the appearance of patient. The SFA has significant advantages especially for class III patients. This study aimed to review the available articles on this topic published from 2012 to 2019 to achieve a comprehensive understanding of different aspects of the SFA. The databases were searched by two researchers and a total of 11 eligible articles were selected for study inclusion. The results were categorized into two categories of stability of the results of the SFA, and duration of treatment, in comparison with the conventional approach. Although different aspects of the SFA have been previously evaluated by dental clinicians, a considerable gap of information still exists regarding the details of this approach, which calls for further research in this respect.
RESUMEN
Many patients, particularly adults, may prefer clear aligner treatment due to its esthetics and ease of use. Some studies have shown that mechanical vibration can affect the rate of tooth movement and other aspects of orthodontic treatment. The purpose of this systematic review was to substantiate the effects of vibration as an adjunct to clear aligner treatment. A comprehensive search of the PubMed, Embase, Cochrane library, and Scopus and also hand searching of reference lists was conducted for finding published studies up to March 2021. Two authors reviewed the titles and abstracts independently to select relevant studies and the full texts where there was some skepticism. Seven papers were included in this study following removing duplicates and irrelevant studies, four of which were randomized controlled trial and three were retrospective studies. In the majority of studies, High-Frequency Vibration (HFV) has shown to be effective in accelerating tooth movement and reducing the exchange interval of aligners. Little data have advocated that HFV can increase bone density, reduce pain or root resorption. It seems that HFV is more effective than low frequency vibration in patients treated with clear aligners. Based on a low level of certainty, HFV can increase the rate of tooth movement and decrease the exchange interval of clear aligners. Further investigation is necessary to clarify the effects of vibration on pain and discomfort, bone density, and root resorption.
RESUMEN
Objective: The purpose of the present study was to investigate the association of COVID-19 vaccination with the quality and quantity of sleep, the level of stress, and temporomandibular joint (TMJ) disorders (TMDs) in Iranian dental students. Materials and methods: In this cross-sectional research, we applied a questionnaire including 30 questions on the Perceived Stress Scale (PSS), sleep quality and quantity, Diagnostic Criteria for Temporomandibular Disorders (DC/TMD), and vaccination status. All vaccinated students of the dental schools located in the city of Tehran were invited to participate in the study. Participants were divided into three groups: those vaccinated for less than a month, those vaccinated for 1-3 months, and those vaccinated for more than 3 months. A paired t-test served for statistical analysis. Results: Overall, 171 out of 235 students (72.77%) completed the questionnaire, among which 90 individuals were fully vaccinated, and were included in the data analysis. Stress levels decreased (mean difference = -1.23, p-value = 0.002) and sleep quality and quantity improved mostly 1-3 months after the vaccination (mean difference = -0.5, p-value = 0.016). However, TMD symptoms were mostly alleviated in people vaccinated for more than 3 months (mean difference = -2.86, p-value <0.05). In this respect, no significant difference was observed between the two genders. Conclusion: According to the results of the study, vaccination was associated with the improvement of psychological consequences of the COVID-19 pandemic. It is recommended that further longitudinal studies be conducted on larger sample sizes and different age groups by using various data collection methods (especially regarding the assessment of TMD).
Asunto(s)
COVID-19 , Trastornos de la Articulación Temporomandibular , COVID-19/epidemiología , COVID-19/prevención & control , Vacunas contra la COVID-19 , Estudios Transversales , Femenino , Humanos , Irán/epidemiología , Masculino , Pandemias , Prevalencia , Estudiantes de Odontología , Trastornos de la Articulación Temporomandibular/complicaciones , Trastornos de la Articulación Temporomandibular/diagnóstico , Trastornos de la Articulación Temporomandibular/epidemiología , VacunaciónRESUMEN
OBJECTIVE: The studies evaluating the efficiency of fiber reinforce composite (FRC) retainers are few and contradictory. This study aimed to compare the debonding force of metal, glass FRC (GFRC) and polyethylene FRC (PFRC) retainers, assess the interactions between the materials and forces, and pattern of load distribution by finite element analysis (FEA). MATERIALS AND METHODS: Forty-eight sound lower incisors were collected and randomly assigned to 3 groups (n=8; each sample included 2 teeth). Next, 15mm of the three retainers (multi-stranded metal wire, GFRC, and PFRC) were bonded to the lingual surface of the teeth and debonding force was measured by a universal testing machine. For FEA, 3D models were designed. The data related to geometrical models and material properties were transferred to ANSYS software. A 187-Newton load was applied to the incisal edge of the two centrals. Then different parameters were assessed. The three groups were compared by one-way Anova and Tukey's test. Type one error was considered to be 0.05. RESULTS: The debonding force decreased in the order: Metal (143.71N)≥GFRC (108.29N)>PFRC (45.08N). The difference between metal retainer and GFRC was not significant. In contrast, PFRC group showed significantly lower debonding force compared to other groups (P<0.05). FEA showed stress peak value in metal-composite interface. Maximum total deformation was noted in central, followed by lateral and canine. CONCLUSIONS: Glass-FRC can serve as an alternative to metal retainers as the difference in debonding force is not significant. However, the difficulty of repairing or replacing the Glass-FRC should be taken into account given the large number of failure in the interproximal dental area.
Asunto(s)
Resinas Compuestas , Recubrimiento Dental Adhesivo , Análisis de Elementos Finitos , Materiales Dentales , Polietileno , Estrés MecánicoRESUMEN
Introduction: Ceramic brackets have gained increasing popularity among dental clinicians and orthodontic patients but friction is a major concern when using them. This study sought to assess the effects of diode and Nd:YAG (neodymium-doped yttrium aluminum garnet) laser irradiation on friction forces between two types of ceramic brackets and rhodium-coated esthetic archwires. Methods: Thirty polycrystalline and 30 poly-sapphire brackets were divided into 6 groups (n=10) as follows: (I) control polycrystalline brackets (no laser irradiation), (II) polycrystalline brackets subjected to diode laser irradiation, (III) polycrystalline brackets subjected to Nd:YAG laser irradiation, (IV) control poly-sapphire brackets (no laser irradiation), (V) poly-sapphire brackets subjected to diode laser irradiation, and (VI) poly-sapphire brackets subjected to Nd:YAG laser irradiation. The bracket slots were laser-irradiated on a custom-made table. Sixty 5-cm pieces of rhodium-coated archwires were used for the friction test in a universal testing machine at a speed of 10 mm/min. Ten brackets from the six groups underwent scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDX). Results: The frictional resistance value of polycrystalline brackets was significantly higher than that of poly-sapphire brackets, irrespective of laser type (P <0.05). Irradiation of diode and Nd:YAG lasers, compared with the control group, had no significant effect on friction, irrespective of bracket type (P >0.05). Conclusion: It appears that diode and Nd:YAG laser irradiation cannot significantly decrease the friction. Future studies are warranted on different laser types with variable exposure.
RESUMEN
OBJECTIVE: It is claimed that a hydrophilic primer, called the moisture insensitive primer (MIP), can be used with both dry and wet enamel surfaces. This study sought to assess the shear bond strength (SBS) of APC Plus adhesive coated appliance system to enamel using MIP in wet and dry conditions. MATERIALS AND METHODS: This in vitro experimental study evaluated 24 extracted maxillary premolars with intact buccal enamel. The teeth were randomly divided into two groups (n=12), and APC Plus premolar brackets were bonded to their buccal surface using moisture insensitive primer (MIP) under wet and dry enamel conditions. The SBS values were measured by a universal testing machine. The adhesive remnant index (ARI) score was also determined under a stereomicroscope. Data were analyzed using t-test and Mann-Whitney test at P<0.05 level of significance. RESULTS: The SBS in wet condition was significantly lower than that in dry condition (mean value of 18.37MPa versus 25.5MPa, P<0.001). The two groups had no significant difference regarding the ARI scores (P>0.05). However, in both groups, less adhesive was left on the tooth surface. This suggests that bond failure occurred at the adhesive-enamel interface. CONCLUSIONS: APC Plus adhesive coated appliance system in combination with hydrophilic MIP can be effective in clinical conditions with high risk of moisture contamination.
Asunto(s)
Recubrimiento Dental Adhesivo , Cementos Dentales/química , Esmalte Dental , Soportes Ortodóncicos , Resistencia al Corte , Diente Premolar , Recubrimiento Dental Adhesivo/métodos , Análisis del Estrés Dental/instrumentación , Etanol , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Ensayo de Materiales , Metacrilatos , Cementos de Resina/química , Propiedades de SuperficieRESUMEN
Introduction: Remineralizing agents may be used for the treatment of white spot lesions (WSLs) prior to bracket bonding. However, some concerns exist regarding their possible interference with the etching and bonding process, negatively affecting the bond strength. This study aimed to assess the effect of two remineralizing agents with/without CO2 laser irradiation on the mechanical properties and shear bond strength (SBS) of demineralized enamel to the orthodontic bracket. Methods: This study evaluated 60 premolar teeth in 6 groups (n=10) as follows: (I) sound enamel, (II) demineralized enamel, (III) Nupro remineralizing agent (N), (IV) Nupro and CO2 laser (N/L), (V) Teethmate remineralizing agent (T), and (VI) Teethmate and CO2 laser (T/L). The remineralizing agents were applied to the enamel surfaces after their immersion in a demineralizing solution for 5 days. In groups IV and VI, the CO2 laser with a 10.6 µm wavelength, 10 ms pulse duration, a 50 Hz repetition rate, 0.3 mm beam diameter and 0.7 W power was irradiated after applying the remineralizing agents. Brackets were bonded to the enamel surfaces and SBS was measured by a universal testing machine. For the assessment of enamel microhardness, 20 sections of molar teeth were divided into 4 groups (n=5; N, N/L, T, T/L) and their microhardness was measured before demineralization, after demineralization and after remineralization. X-ray diffraction (XRD) analysis, field-emission scanning electron microscopy (FESEM) and energy-dispersive spectrometry (EDS) were carried out to assess the formation of hydroxyapatite. The atomic percentages of the C, O, P, Ca, Na, Si, F and Ca/P ratio were determined by EDS analysis. Results: The SBS significantly decreased in group II (P<0.001). There was no significant difference among the groups I, III, IV, V and VI (P<0.05). This finding was similar to the microhardness results, which showed an increase in microhardness after remineralization (P<0.05), with no difference among the remineralizing agents. The Ca/P ratio was the highest in the Nupro group and the lowest in the demineralized group. Conclusion: Remineralizing agents can significantly improve the microhardness and structural properties of demineralized enamel to a level similar to that of sound enamel with no adverse effect on SBS to orthodontic brackets.
RESUMEN
OBJECTIVES: This study aimed to assess the effect of 0.05% sodium fluoride (NaF) mouthwash on the surface roughness and friction between ceramic brackets and rhodium-coated (RC) and uncoated stainless steel (SS) wires. MATERIALS AND METHODS: This experimental study was performed on 48 maxillary premolar ceramic brackets. Twenty-four pieces of RC-SS wires were used. Samples were divided into four groups. Groups 1 and 2 were immersed in artificial saliva, and groups 3 and 4 were immersed in a solution consisting of artificial saliva (9%) and mouthwash (91%). To assess surface roughness, images were obtained from the surface of wires and brackets with atomic force microscopy (AFM) and scanning electron microscopy (SEM) before and after the intervention. To assess friction, the wires were ligated into brackets, and friction was measured at a crosshead speed of 0.5 mm/minute using a universal testing machine. Data were analyzed using one-way analysis of variance (ANOVA) at the 0.05 significance level. RESULTS: Friction during sliding in RC wires was significantly less than that in SS wires (P<0.05). Increase in the friction in SS wires by mouthwash was significantly greater compared to RC wires (P<0.05). Surface roughness coefficients of the wires before the intervention were not significantly different. The surface roughness of the wires significantly increased after the intervention and it was greater in SS wires than in RC wires (P<0.05). CONCLUSION: Considering the lower friction and surface roughness of SS-RC wires compared to SS wires, SS-RC wires may be a better alternative for use with ceramic brackets.
RESUMEN
BACKGROUND: Propolis is a resinous substance obtained from the beehives that has antioxidant, anti-bacteria, anti-virus, anti-fungal, anti-tumor and anti-inflammatory activity. The aim of this study was to review the studies about the role of propolis in improving dental and oral health. METHODS: This study reviewed the published articles regarding the applications of propolis in dentistry. An electronic search of the literature was carried out in Farsi electronic databases including Google, Medlib.ir, SID, Iranmedex and Magiran as well as English electronic databases such as PubMed and ISI Web of Knowledge. These databases were searched for articles published between 1997 and October 20, 2017. Non-dental books and journals were also manually searched. RESULTS: This study reviewed published articles on the efficacy of propolis for surgical wound healing, caries prevention, treatment of dentin hypersensitivity, treatment of aphthous ulcers and propolis as a storage medium for avulsed teeth, root canal irrigating solution and mouthwash. CONCLUSION: The result of the reviewed article showed that propolis is effective an agent that is used for multiple purpose in oral health.
Asunto(s)
Odontología/métodos , Própolis , Caries Dental/prevención & control , Humanos , Antisépticos Bucales , Própolis/uso terapéutico , Irrigantes del Conducto Radicular , Estomatitis Aftosa/terapia , Cicatrización de HeridasRESUMEN
OBJECTIVES: This study sought to assess the effect of quaternary ammonium salt (QAS) on shear bond strength of orthodontic brackets to enamel. MATERIALS AND METHODS: In this in vitro experimental study, 0, 10, 20 and 30% concentrations of QAS were added to Transbond XT primer. Brackets were bonded to 60 premolar teeth using the afore-mentioned adhesive mixtures, and the shear bond strength of the four groups (n=15) was measured using a universal testing machine. After debonding, the adhesive remnant index (ARI) score was determined under a stereomicroscope. Data were analyzed using one-way ANOVA. RESULTS: The mean and standard deviation of shear bond strength of the control and 10%, 20% and 30% groups were 23.54±6.31, 21.81±2.82, 20.83±8.35 and 22.91±5.66 MPa, respectively. No significant difference was noted in shear bond strength of the groups (P=0.83). Study groups were not different in terms of ARI scores (P=0.80). CONCLUSIONS: The results showed that addition of QAS to Transbond XT primer had no adverse effect on shear bond strength of orthodontic brackets.
RESUMEN
The aim of this randomized clinical study was to investigate the effectiveness of acetaminophen 650 mg or liquefied ibuprofen 400 mg in pain control of orthodontic patients during separation with an elastic separator. A total of 101 patients with specific inclusion criteria were divided randomly into three groups (acetaminophen, liquefied ibuprofen, and placebo). They were instructed to take their drugs one hour before separator placement and every six hours afterward (five doses in total). They recorded their discomfort on visual analog scales immediately after separator placement, 2 hours later, 6 hours later, at bedtime, and 24 hours after separator placement. Repeated measure analysis of variance (ANOVA) was used to compare the mean pain scores between the three groups. Data were collected from 89 patients. The pain increased with time in all groups. Pain scores were statistically lower in the analgesic groups compared with the placebo group (P.value<0.001), but no statistically significant difference was found in mean pain scores between the two drug groups (acetaminophen and liquefied ibuprofen) (P.value=1). Acetaminophen and liquefied ibuprofen have similar potential in pain reduction during separation.
Asunto(s)
Acetaminofén/uso terapéutico , Analgésicos no Narcóticos/uso terapéutico , Ibuprofeno/uso terapéutico , Dolor/tratamiento farmacológico , Técnicas de Movimiento Dental/efectos adversos , Acetaminofén/administración & dosificación , Adolescente , Analgésicos no Narcóticos/administración & dosificación , Análisis de Varianza , Femenino , Humanos , Ibuprofeno/administración & dosificación , Masculino , Dolor/etiología , Manejo del Dolor/métodos , Dimensión del Dolor , Proyectos de Investigación , Factores de TiempoRESUMEN
BACKGROUND: Methods used to upright lingually tilted mandibular molars frequently result in extrusion and unwanted rotations. AIM: To use the finite element method (FEM) to compare three springs designed to upright a lingually tilted mandibular first molar. METHODS: A 3-D computer model of a lingually tilted mandibular first molar was designed. The FEM was used to compare movement of the molar during uprighting with either a single horizontal helix, an open vertical loop, or a new spring with two vertical helices wound around and perpendicular to the long axis of the archwire. Each spring was assumed to be part of a continuous 0.016 x 0.022 inch stainless steel archwire, and each spring was placed mesial to the buccal tube on the first molar. RESULTS: From the mesial perspective, all designs moved the crown of the lingually tilted molar buccally and the root apex lingually. From the occlusal perspective: the horizontal helix uprighted the molar with a disto-buccal rotation; the open vertical loop uprighted the molar with a mesio-buccal rotation; and the new design uprighted the lingually tilted molar around a mesio-distal axis. CONCLUSION: Using FEM, the most suitable design was a double helix formed around and perpendicular to the long axis of the archwire and sited mesial to the tilted molar. It was the only spring to upright the lingually tilted molar without an unwanted rotation.