Tension Distribution in Articular Surfaces of the Rotator Cable and Crescent: A Cadaveric Study.

BACKGROUND: The rotator cable functions as a stress and/or load transfer structure. Some studies suggested that a disruption of the cable negatively affects shoulder function and tendon integrity in patients with rotator cuff tears, while others found no functional impairment regardless of rotator cable tear severity. Although anatomical studies have identified distinct regions within the rotator cuff muscles, the strain distribution within the articular sides of the rotator cuff tendons that results from the tension in each region remains unknown. We hypothesized that the posterior region of the supraspinatus (SSP) muscle and the middle region of the infraspinatus (ISP) muscle, with their firm capsular attachments to the cable, transmit 3D strains, and thus tension, to the whole cable, leading to differences in tension within the cable. METHODS: The 3D strain distributions in the articular sides of the SSP and ISP tendons of 8 fresh-frozen cadaveric intact shoulders were determined when tension was applied to the various SSP and ISP muscle regions. RESULTS: Loading the anterior SSP muscle region yielded significantly higher strains in the anterior third of the cable compared with the posterior third (p < 0.05). Loading the posterior SSP muscle region yielded no significant differences among the cable and crescent regions. Loading the middle ISP muscle region yielded higher strains in the anterior and posterior thirds of the cable compared with the middle third (p < 0.01). Loading the superior ISP muscle region yielded no significant differences among the cable and crescent regions (p > 0.05). CONCLUSIONS: Tension generated from the posterior region of the SSP muscle and middle region of the ISP muscle was evenly distributed to the anterior and posterior attachments of the rotator cable, while the tension generated from other SSP and ISP muscle regions was locally transmitted to the respective attachment area. CLINICAL RELEVANCE: The rotator cable and crescent serve pivotal roles in transmitting tension generated from the deep regions of the rotator cuff muscles, i.e., the posterior SSP and middle ISP. These findings indicate that both the rotator cable and the rotator crescent play crucial roles as tension transmitters for the deep regions of the rotator cuff muscles. This information could have important implications for developing anatomically relevant repair techniques and enhancing rehabilitation protocols.

Vertebral Fracture Risk Thresholds from Phantom-Less Quantitative Computed Tomography-Based Finite Element Modeling Correlate to Phantom-Based Outcomes.

INTRODUCTION: Osteoporosis indicates weakened bones and heightened fracture susceptibility due to diminished bone quality. Dual-energy x-ray absorptiometry is unable to assess bone strength. Volumetric bone mineral density (vBMD) from quantitative computed tomography (QCT) has been used to establish guidelines as equivalent measurements for osteoporosis. QCT-based finite element analysis (FEA) has been implemented using calibration phantoms to establish bone strength thresholds based on the established vBMD. The primary aim was to validate vertebral failure load thresholds using a phantom-less approach with previously established thresholds, advancing a phantom-free approach for fracture risk prediction. METHODOLOGY: A controlled cohort of 108 subjects (68 females) was used to validate sex-specific vertebral fracture load thresholds for normal, osteopenic, and osteoporotic subjects, obtained using a QCT/FEA-based phantom-less calibration approach and two material equations. RESULTS: There were strong prediction correlations between the phantom-less and phantom-based methods (R2: 0.95 and 0.97 for males, and R2: 0.96 and 0.98 for females) based on the two equations. Bland Altman plots and paired t-tests showed no significant differences between methods. Predictions for bone strengths and thresholds using the phantom-less method matched those obtained using the phantom calibration and those previously established, with ≤4500 N (fragile) and ≥6000 N (normal) bone strength in females, and ≤6500 N (fragile) and ≥8500 N (normal) bone strength in males. CONCLUSION: Phantom-less QCT-based FEA can allow for prospective and retrospective studies evaluating incidental vertebral fracture risk along the spine and their association with spine curvature and/or fracture etiology. The findings of this study further supported the application of phantom-less QCT-based FEA modeling to predict vertebral strength, aiding in identifying individuals prone to fractures. This reinforces the rationale for adopting this method as a comprehensive approach in predicting and managing fracture risk.

Muscle belly ratio is the most suitable estimate of the activity of the torn supraspinatus muscle.

Background: A torn rotator cuff muscle deteriorates over time leading with an increase in muscle atrophy and fatty infiltration. There are several clinical assessments for evaluating the atrophy of the torn supraspinatus muscle. However, it is unclear which approach can more accurately estimate the activity of the torn supraspinatus muscle. The purpose of this study was to determine which magnetic resonance imaging-based muscle atrophy imaging assessment currently implemented in the clinical setting accurately estimates the activity of the torn supraspinatus muscle. Methods: Forty patients who were diagnosed with a rotator cuff tear and were candidates for repairs were selected for this study. Cross-sectional area, occupation ratio, and tangent sign were analyzed on T1-weighted oblique sagittal plane magnetic resonance images in which the scapular spine leads to the Y-section. Muscle belly ratio of the supraspinatus muscle was analyzed by calculating the ratio of the width of the muscle belly to the distance from the greater tubercle to the proximal end of the muscle on T1-weighted coronal plane magnetic resonance imaging images. Fatty infiltration was evaluated using the Goutallier classification system. Tear size was obtained intraoperatively by measuring the width and length of the tear and classified based on the Cofield's classification. To assess activity of the torn supraspinatus muscle, participants were first instructed to sit on a chair with the affected arm resting on a table and the shoulder abducted to 60° in the scapular plane with neutral rotation. Elasticity of the supraspinatus muscle belly was then obtained at rest and during isometric contraction using with real-time tissue elastography. Muscle activity, a surrogate for contractility, was defined as the difference between the elasticities measured at rest and during isometric contraction. A stepwise multiple regression analysis was used to investigate independent factors, such as sex, tear width, cross-sectional area, occupation ratio, tangent sign, and muscle belly ratio, related to muscle activity. Results: Stepwise multiple regression analysis (R2 = 0.522, P < .001) revealed that supraspinatus muscle activity was significantly correlated with muscle belly ratio (ß = 0.306, P = .044) and Goutallier stage (ß = -0.490, P = .002). Conclusion: Estimations of muscle belly ratio are most suitable for assessing the activity of a torn supraspinatus muscle compared to other clinical measurements.

Moment arms of the anatomical subregions of the rotator cuff muscles during shoulder rotation.

BACKGROUND: Rotator cuff muscles are responsible for humeral rotation. Moment arms of different regions of these muscles during humeral rotation were analyzed in neutral and abducted positions. METHODS: In eight cadaveric shoulders, subregions of the rotator cuff muscles were identified and their excursion during humeral rotation was measured in neutral and abducted positions from an internal rotation of 30° to an external rotation of 45°, with 15° increments, using a 3-D digitizing system. Statistical tests were used to assess differences between subregions within a single muscle. FINDINGS: The posterior-deep subregion of the supraspinatus muscle had greater moment arms compared to the anterior-superficial and anterior-middle subregions in both positions (p < 0.001). The middle and inferior subregions of the infraspinatus muscle and the teres minor muscle showed differences in moment arms compared to the superior region in an abducted position (p < 0.042). The superior subregion of the subscapularis muscle showed differences in moment arms compared to the middle and inferior subregions in an abducted position (p < 0.001). INTERPRETATION: The posterior-deep subregion of the supraspinatus muscle behaved similar to the infraspinatus muscle, as an external rotator. The anterior-superficial and anterior-middle subregions of the supraspinatus muscle showed a biphasic behavior during rotation at a neutral position, but acted as pure external rotators during rotation at an abducted position. Inferior subregions of the infraspinatus and subscapularis muscles showed the largest moment arms compared to superior subregions. These findings support distinct functional roles of the rotator cuff muscle subregions.

Strain distribution in the bursal rotator cuff based on whole-muscle and muscle subregion-specific loading: A cadaveric study.

Rotator cuff (RC) tears are common injuries leading to significant dysfunction of the shoulder. Rotator cuff tears alter tension and strain in muscles and tendons. Anatomical studies demonstrated that rotator cuff muscles are comprised of anatomical subregions. However, the strain distribution within the rotator cuff tendons generated from the tension from each anatomical subregion is unknown. We hypothesized that subregions would present distinct 3-dimensional (3D) strain distributions within the rotator cuff tendons, and that the anatomical insertion configuration of the supraspinatus (SSP) and infraspinatus (ISP) tendons might dictate strain, thus tension, transmission. 3D-strains in the bursal side of the SSP and ISP tendons of eight fresh-frozen cadaveric intact shoulders were obtained by applying tension on the whole SSP and ISP muscles, and on their subregions using an MTS system. Strains in the anterior region of the SSP tendon were higher than in the posterior region with whole-SSP anterior-region (p < 0.05) and whole-SSP muscle loading. Higher strains were observed in the inferior half of the ISP tendon with whole-ISP muscle (p < 0.05), middle-subregion (p < 0.01), and superior-subregion (p < 0.05) loading. Tension generating from the posterior-region of the SSP was primarily transmitted to the middle facet via an overlap between the SSP and ISP tendons insertions, while the anterior-region mainly distributed its tension into the superior facet. Tension generating from the middle and superior-regions of the ISP was distributed into the inferior portion of the ISP tendon. These results emphasize the importance of the distinct anatomical subregions of the SSP and ISP muscles in distributing the tension to the tendons.

Moment arms from the anatomical subregions of the rotator cuff muscles during flexion.

Rotator cuff (RC) muscles act as force couples to stabilize the glenohumeral joint and enable shoulder motion. We investigated the moment arms of anatomical subregions of the supraspinatus (SSP), infraspinatus (ISP), subscapularis (SSC), and the teres minor muscles during flexion. Eight fresh-frozen cadaveric shoulders were obtained and the anatomical subregions of the RC muscles were identified. Sutures were secured for each subregion at the musculotendinous junction and excursion during flexion from 30° to 90° at 10° increments was measured using a 3-D digitizing system. Kruskal-Wallis test followed by the Bonferroni post-hoc test was used to assess differences from subregions within a single muscle. There were significant differences in moment arms between the subregions from each RC muscle (P < 0.001). The anterior-superficial and -middle subregions of the SSP muscle presented positive (flexor) and decreasing moment arms with increasing flexion. The posterior-deep subregion showed moment arms with positive but decreasing values up to 65°, and negative (extensor) moment arms at larger angles. Subregions from the ISP showed positive and almost constant moment arms throughout range of motion, while the teres minor presented negative and almost unaltered moment arms. The superior and middle subregions of the SSC showed positive, but decreasing, moment arms with increasing angles up to 75° flexion, with negative moment arms towards end-range. The inferior subregion presented negative moment arms throughout flexion. Our results indicated that the posterior deep subregion of SSP muscle seems to act as a flexor at early range and as a stabilizer at mid-to-end range of flexion.

The functional role of the supraspinatus and infraspinatus muscle subregions during forward flexion: a shear wave elastography study.

Background: Knowledge of the morphological and functional differences in the anatomic subregions of the supraspinatus (SSP) and infraspinatus (ISP) muscles during forward flexion will provide useful information in the management of shoulder joint disorders. The purpose of this study was to investigate whether the SSP and ISP muscle subregions exhibit independent roles during forward flexion of the shoulder joint. Methods: Eight healthy male volunteers without any restriction in their shoulder joints were recruited for this study. Participants were instructed to sit on a chair with their back against the backrest. Shear modulus (kPa) was measured as a surrogate for muscle stiffness using shear wave elastography on the SSP and ISP muscle subregions. Active measurements of the nondominant arm were obtained during isometric contraction at a neutral position and every 15° intervals from 30° to 150° during forward flexion. Friedman test and Dunn's post hoc test were used to evaluate differences in measurement outcomes among angles during forward flexion in each muscle subregion. Results: Active stiffness outcomes of the anterior-middle subregion of the SSP muscle during forward flexion increased from 30° up to 45°, reaching a value of 182.4 ± 32.1 kPa (P < .001). Stiffness of the anterior-superficial subregion of the SSP muscle was highest at 30° (125.0 ± 20.6 kPa; P < .019) and linearly decreased up to 105° with increasing shoulder angle position. Stiffness of the superior, middle, and inferior subregions of ISP muscle presented a mountain-shaped trend, with peaks of 99.9 ± 23.5 kPa at 90° (P < .013), 144.2 ± 11.2 kPa at 90° (P < .013), and 122.9 ± 27.9 kPa at 105° (P < .007), respectively. Finally, the stiffness outcomes of the pectoralis major and anterior region of the deltoid muscles showed a mountain-shaped trend with peaks of 89.4 ± 23.5 kPa at 60° (P < .007) and 176.7 ± 22.9 kPa at 90° (P < .026), respectively. Conclusions: The SSP and ISP muscle subregions play a significant role during active forward flexion motion. While closely overlapped, the activity of the muscle subregions changed during the forward flexion motion range, starting with an active anterior-superficial subregion of the SSP muscle at the initial range of motion and an active inferior subregion of the ISP muscle toward midrange of motion. The SSP and ISP subregions did not demonstrate independent functional behavior during forward flexion.

Discectomy decreases facet joint distance and increases the instability of the spine: A finite element study.

The L4-L5 spinal segment is mostly associated with the development of lumbar back pain (LBP). Lumbar disc herniation (LDH), intervertebral disc degeneration (IVDD), or degeneration of the facet joints (FJs) can lead to LBP. Although the surgical gold standard for treating LDH is well established, consequences from this surgery on the biomechanics of the spine are still a matter of discussion. Using a finite element model of the L4-L5 spinal segment, this study aimed (1) to determine the changes in FJ distance during physiological motions of a lumbar spine in a healthy-normal condition, after conservative and aggressive percutaneous transforaminal endoscopic discectomy (PTED) to correct LDH, and during mild and severe IVDD; (2) to determine spine instability and endplate stresses under various physiological motions. Aggressive-PTED in a healthy disc decreased facet distances in axial rotation, lateral bending, and flexion by ∼25%, ∼10%, and 8%, respectively. Mild and severe disc degeneration increased the stiffness of the spine, resulting in a decrease in the range of motion (ROM) for all conditions. Severe disc degeneration decreased ROM as high as 57% for lateral bending, while a 13% decrease was observed for mild degeneration. High and abnormal endplate stress distributions were observed due to PTED and IVDD. PTED and IVDD, individually and collectively, change spine kinematics potentially leading to LBP and other associated negative outcomes. An increase in spine instability and a decrease in distance between superior and inferior facets resulting from PTED might lead to facet degeneration.

Influence of fat infiltration, tear size, and post-operative tendon integrity on muscle contractility of repaired supraspinatus muscle.

BACKGROUND: The purpose of this study was to evaluate the effect of fat infiltration, tear size, and post-operative tendon integrity, on post-operative contractility. METHODS: Thirty-five patients who underwent rotator cuff repair were included. The fat infiltration, tear size, and post-operative tendon integrity were evaluated by Goutallier stage, Cofield classification, and Sugaya classification, respectively. The muscle elasticity at rest and at contraction was assessed by real-time tissue elastography pre- and one-year post-operatively. We defined the difference in elasticity between at rest and at contraction as the activity value which reflects muscle contractility. RESULTS: The activity value in patients with Sugaya Type I tended to increase regardless of Cofield classification, whereas those with Sugaya Type III and IV tended to decrease. While the activity value in the patients classified as stage 1 and Type I tended to increase, patients classified as stage 2 showed decreased or constant in contractility even in those subjects classified as Type I. Stepwise multiple regression analysis showed both pre- (p = 0.004, r = -0.47) and post-operative activity values (p = 0.022, r = -0.39) to be significantly correlated only with the Goutallier stage. CONCLUSION: Multiple regression analysis indicated only the Goutallier stage was a significant independent factor for contractility of the supraspinatus muscle. Supraspinatus muscle contractility in patients classified as Types III and IV based on the Sugaya classification tended to decrease post-operatively, while patients whose contractility increased post-operatively were characterized by having a Type I tendon integrity.

Three-dimensional quantitative measurements of atrophy and fat infiltration in sub-regions of the supraspinatus muscle show heterogeneous distributions: a cadaveric study.

INTRODUCTION: Rotator cuff tears are common in the older population. Atrophy and fat infiltration develop un-evenly in torn supraspinatus (SSP) muscles leading to pre- and post-surgical complications. The purpose of the current study was twofold: first, to implement a volumetric and quantitative magnetic resonance imaging (MRI) approach to quantify the degree of muscle atrophy and fat infiltration within the SSP muscle and its four sub-regions (AS, PS, AD, and PD); second to compare 3-D MRI outcomes to the standard 2-D assessment and investigate their relationship with tear size. MATERIALS AND METHODS: Fifteen cadaveric shoulders were obtained and MRI performed. Quantitative 3-D outcomes included SSP muscle volume, fossa volume, fat-free muscle volume, and fat fraction for the whole SSP muscle and its four sub-regions. 2-D and qualitative measurements included tear size, 2-D fat infiltration using the Goutallier classification, tangent sign, and occupation ratio. RESULTS: Linear regression outcomes with tear size were not significant for both cross-sectional area (r = - 0.494, p = 0.061) and occupation ratio (r = - 0.011, p = 0.969). Tear size negatively correlated with fat-free muscle volume for both AS and PS sub-regions (AS: r = - 0.78, p < 0.001; PS: r = - 0.68, p = 0.005, respectively) while showing no significant correlation with fat fraction outcomes. AD and PD sub-regions positively correlated with tear size and fat fraction outcomes (AD: r = 0.70, p = 0.017; PD: r = 0.52, p = 0.045, respectively), while no significant correlation was observed between tear size and fat-free muscle volumes. CONCLUSION: Quantitative 3-D volumetric assessment of muscle degeneration resulted in better outcomes compared to the standard 2-D evaluation. The superficial supraspinatus muscle sub-regions primarily presented muscle atrophy, while the deep sub-regions were mainly affected by fat infiltration. 3-D assessments could be used pre-surgically to determine the best course of treatment and to estimate the muscles' regenerative capacity and function.

Ultrasound Elastography for Hand Soft Tissue Assessment.

Over the past decade, ultrasound elastography has emerged as a new technique for measuring soft tissue properties. Real-time, noninvasive, and quantitative evaluations of tissue stiffness have improved and aid in the assessment of normal and pathological conditions. Specifically, its use has substantially increased in the evaluation of muscle, tendon, and ligament properties. In this review, the authors describe the principles of elastography and present different techniques including strain elastography and shear-wave elastography; discuss their applications for assessing soft tissues in the hand before, during, and postsurgeries; present the strengths and limitations of their measurement capabilities; and describe directions for future research.

Intracompartmental pressure in lower leg muscles and tibial nerve in healthy volunteers correlate to the stiffness measured using shear wave elastography.

BACKGROUND: Acute compartment syndrome in the lower leg is a painful condition characterized by an increase in intracompartmental pressure. To prevent misdiagnosis and delay in the recognition of the condition, which can lead to severe complications, continuous monitoring of intracompartmental pressure for at least 24 h. from the onset of initial symptoms has been recommended. The purpose of the current study was to establish shear wave elastography as a potential imaging biomarker for the observed increase in pressure in four compartments of the lower leg. METHODS: Eighteen healthy participants (9 males) without any injury in their leg muscles were recruited for the study after internal review board approval. Subjects were instructed to sit on a table and pressures at 60, 90, and 120 mmHg were applied using a pressure cuff placed above the proximal pole of the patella. Shear wave elastography-measured stiffness outcomes at baseline (0 mmHg) and at each cuff pressure level were obtained from the tibialis anterior, the peroneus longs, gastrocnemius medialis, and tibialis posterior muscles, as well as the tibial nerve. FINDINGS: Spearman's rank correlation coefficient showed strong correlations between shear wave elastography-measured stiffness from all four muscles and cuff pressure levels (r > 0.80, P < 0.05). Stiffness from the tibial nerve was also significantly correlated with cuff pressure levels (r > 0.99, P < 0.05). INTERPRETATION: Shear wave elastography imaging of lower leg muscles and nerve can be useful to non-invasively monitor intracompartmental pressure in patients suspected of acute compartment syndrome.

Diabetes mellitus accelerates the progression of osteoarthritis in streptozotocin-induced diabetic mice by deteriorating bone microarchitecture, bone mineral composition, and bone strength of subchondral bone.

BACKGROUND: The purpose of this study was to develop an optimal diabetes-osteoarthritis (DM-OA) mouse model to validate that diabetes aggravates osteoarthritis (OA) and to evaluate the microarchitecture, chemical composition, and biomechanical properties of subchondral bone (SB) as a consequence of the DM-OA-induced damage induced. METHODS: Mice were randomly divided into three groups: DM-OA group, OA group, and sham group. Blood glucose levels, body weight, and food intake of all animals were recorded. Serum calcium (Ca) and osteocalcin (OCN) levels were compared in the three groups. The messenger ribonucleic acid (mRNA) and protein expression of key regulators for bone metabolism were detected. A semi-quantitative grading system [Osteoarthritis Research Society International (OARSI)] was used to evaluate cartilage and SB degeneration. Microspectroscopy, microindentations, micro-computed tomography (CT) imaging, and fracture load of compression testing were also used to evaluate trabecular SB properties. RESULTS: Glycemic monitoring and pancreas pathological results indicated stable high blood glucose and massive destruction of pancreas and islet cells in the DM-OA group. Serum levels of bone specific alkaline phosphatase (ALP-B) and tartrate-resistant acid phosphatase 5b (TRACP-5b) in the DM-group were higher than those of the other two groups while levels of serum Ca and OCN were lower. Meanwhile, the protein and mRNA expression of osteoblast-specific biomarkers [osteoprotegerin/receptor activator of nuclear factor kappa-B ligand (OPG/RANKL) ratio, collagen type I (COL-I), Runt-related transcription factor 2 (RUNX-2), OCN] were suppressed, and osteoclast-specific biomarkers [sclerostin (SOST)] was elevated in the DM-OA group. The mineral-to-collagen ratio, microindentation elastic modulus, hardness, micro-architectural parameters, bone mineral density, and fracture load of SB trabecular bone of the DM-OA group joint were lower than those of the other two groups. On the other hand, The OARSI score, trabecular spacing, and structural model index of the DM-OA group joint were higher than those of the other two groups. CONCLUSIONS: The glycemic and pancreatic pathological results indicated that the DM-OA model was a simple and reliable model induced by streptozotocin (STZ) and surgery. The results revealed the mechanisms through which diabetes accelerates OA; that is, by damaging and deteriorating the functions of SB, including its microarchitecture, chemical composition, and biomechanical properties.

Opportunistic application of phantom-less calibration methods for fracture risk prediction using QCT/FEA.

OBJECTIVES: Quantitative computed tomography (QCT)-based finite element analysis (FEA) implements a calibration phantom to estimate bone mineral density (BMD) and assign material properties to the models. The objectives of this study were to (1) propose robust phantom-less calibration methods, using subject-specific tissues, to obtain vertebral fracture properties estimations using QCT/FEA; and (2) correlate QCT/FEA predictions to DXA values of areal BMD. METHODS: Eighty of a cohort of 111 clinical QCT scans were used to obtain subject-specific parameters using a phantom calibration approach and for the development of the phantom-less calibration equations. Equations were developed based on the HU measured from various soft tissues and regions, and using multiple linear regression analyses. Thirty-one additional QCT scans were used for cross-validation of QCT/FEA estimated fracture loads from the L3 vertebrae based on the phantom and phantom-less equations. Finally, QCT/FEA-predicted fracture loads were correlated with aBMD obtained from DXA. RESULTS: Overall, 217 QCT/FEA models from 31 subjects (20 females, 11 men) with mean ages of 69.6 (13.1) and 67.3 (14) were used to cross-validate the phantom-less equations and assess bone strength. The proposed phantom-less equations showed high correlations with phantom-based estimates of BMD (99%). Cross-validation of QCT/FEA-predicted fracture loads from phantom-less equations and phantom-specific outcomes resulted in high correlations for all proposed methods (0.94-0.99). QCT/FEA correlation outcomes from the phantom-less equations and DXA-aBMD were moderately high (0.64-0.68). CONCLUSIONS: The proposed QCT/FEA subject-specific phantom-less calibration methods demonstrated the potential to be applied to both prospective and retrospective applications in the clinical setting. KEY POINTS: • QCT/FEA overcomes the disadvantages of DXA and improves fracture properties predictions of vertebrae. • QCT/FEA fracture estimates using the phantom-less approach highly correlated to values obtained using a calibration phantom. • QCT/FEA prediction using a phantom-less approach is an accurate alternative over phantom-based methods.

Stiffness of the infraspinatus and the teres minor muscles during shoulder external rotation: An in-vitro and in-vivo shear wave elastography study.

BACKGROUND: A better understanding of the morphological and functional differences in the anatomical sub-regions of the rotator cuff muscles is critical so that appropriate surgical and rehabilitation methodologies can be implemented in patients with shoulder-related injuries. The purpose of the current study was to develop a comprehensive imaging protocol using shear-wave elastography for the infraspinatus and teres minor muscles, and investigate differences in elastic properties of three distinct infraspinatus muscle sub-regions and of the teres minor muscle. METHODS: First, we developed a protocol for probe positioning for both muscles using three cadaveric shoulders. Second, we evaluated in-vivo elastic properties [passive and active stiffness (kPa)] and excursion (mm) outcomes from these muscles during shoulder external rotation. FINDINGS: Elastic properties were significantly different among the infraspinatus muscle sub-regions and teres minor muscle. Passive stiffness decreased with increasing rotation angles except for the middle sub-region of the infraspinatus muscle which showed a decreased up to mid-range followed by an increment towards the end-range. Overall, active stiffness of the infraspinatus muscle and teres minor muscle decreased with increasing rotation angles, while that of the middle sub-region increased up to mid-range, and decreased at the end-range. INTERPRETATION: Distinct characteristics of the infraspinatus and teres minor muscles, and more importantly, of the individual sub-regions within the infraspinatus muscle call for an in-depth analysis of their morphological and functional differences. Special attention should be put into these sub-regions when performing surgical and rehabilitation procedures for patients with shoulder-related injuries.

CT-based structural analyses of vertebral fractures with polymeric augmentation: A study of cadaveric three-level spine segments.

Pathologic vertebral fractures due to metastasis can occur under normal physiologic activities, leading to pain and neurologic deficit. Prophylactic vertebroplasty is a technique used to augment vertebral strength and reduce the risk of fracture. Currently, no technique is available to objectively assess vertebral fracture risk in metastatically-involved vertebral bodies. The aim of the current study was to develop an image-based computational technique to estimate fracture force outcomes during bending. To this end, mechanical testing was performed on intact, simulated defect, PMMA-augmented, and PPF-augmented 3-level spine segments from both sexes under a compression/flexion-type loading condition. The augmentation performance of poly(methyl methacrylate) (PMMA) and poly(propylene fumarate) (PPF) were also evaluated and compared. Cylindrical defects were created in 3-level spine segments with attached posterior elements and ligaments. Using CT images of each segment, a rigidity analysis technique was developed and used for predicting fracture forces during bending. On average, PPF strengthened the segments by about 630 N, resulting in fracture forces similar to those observed in the intact and PMMA-augmented groups. Female spines fractured at about 1150 N smaller force than did male spines. Rigidity analysis, along with age, explained 66% variability in experimental outcomes. This number increased to 74% when vertebral size and age were added to the rigidity analysis as explanatory variables. Both PPF and PMMA similarly increased fracture strength to the level of intact specimens. The results suggest that PPF can be a suitable candidate for augmentation purposes and rigidity analysis can be a promising predicting tool for vertebral fracture forces.

Three-dimensional surface strain analyses of simulated defect and augmented spine segments: A biomechanical cadaveric study.

While several studies have investigated fracture outcomes of intact vertebrae, fracture properties in metastatically-involved and augmented vertebrae are still far from understood. Consequently, this study was aimed to use 3D digital image correlation (3D-DIC) method to investigate the failure properties of spine segments with simulated metastatic lesions, segments augmented with poly(propylene fumarate) (PPF), and compare the outcomes with intact spines. To this end, biomechanical experiments accompanied by 3D-DIC were performed on spine segments consisting of three vertebrae and two intervertebral discs (IVDs) at loading rates of 0.083 mm/s, mimicking a physiological loading condition, and 200 mm/s, mimicking an impact-type loading condition such as a fall or an accident. Full-field surface strain analysis indicated PPF augmentation reduces the superior/inferior strain when compared with the defect specimens; Presence of a defect in the middle vertebra resulted in shear band fracture pattern. Failure of the superior endplates was confirmed in several defect specimens as the superior IVDs were protruding out of defects. The augmenting PPF showed lower superior/inferior surface strain values at the fast speed as compared to the slow speed. The results of our study showed a significant increase in the fracture force from slow to fast speeds (p = 0.0246). The significance of the study was to determine the fracture properties of normal, pathological, and augmented spinal segments under physiologically-relevant loading conditions. Understanding failure properties associated with either defect (i.e., metastasis lesion) or augmented (i.e., post-treatment) spine segments could potentially provide new insights on the outcome prediction and treatment planning. Additionally, this study provides new knowledge on the effect of PPF augmentation in improving fracture properties, potentially decreasing the risk of fracture in osteoporotic and metastatic spines.

Elastographic Region of Interest Determination for Muscle with Fat Infiltration.

PURPOSE: Ultrasound elastography has been used to evaluate the skeletal muscle stiffness as a biomarker for sarcopenia assessment. However, there is no consensus with respect to the size and location of the region of interest in assessing such fat infiltrated muscle. The objective of this study was to determine which cross-sectional area should be measured in torn disuse muscle with fat infiltration to accurately measure muscle activity using real-time tissue elastography (RTE). METHODS: Twenty-seven patients, whose rotator cuff muscle with torn tendon was successfully repaired, were followed by programmed rehabilitation. RTE measurements of the supraspinatus muscle were obtained during muscle contraction before and one-year after surgery so that the activity value was defined as the difference between elastography measurements at rest and elastography measurements during contraction. Given that the patients with successfully repaired and completed rehabilitation showed an increased activity value, the sensitivity for three regions of interest; posterior portion of the anterior-middle subregion (AM-p), anterior region (AR), and whole cross-sectional area of the supraspinatus (whole) were compared with the number of patients showing an increase in activity values as sensitivity analysis. RESULTS: The sensitivity showing an increase in activity values was 74.1% for the AM-p area, 70.4% for the AR area, and 81.5% for the whole area. Intraclass correlation coefficient1,3 was 0.87-0.97 for the AM-p area, 0.88-0.98 for the AR area and 0.92-0.99 for the whole area. CONCLUSION: The whole cross-sectional area is suitable to measure muscle activity in muscle with fat infiltration. The results in this study will provide some beneficial information when ultrasound elastography is used for the assessment of sarcopenia muscle with fat infiltration.

Shoulder scaption is dependent on the behavior of the different partitions of the infraspinatus muscle.

PURPOSE: The purpose of this study was to investigate if the three partitions (superior, middle, and inferior partitions) of the infraspinatus muscle previously described in anatomical studies will present different behavior during scapular plane abduction (scaption) as described using shear-wave elastography, especially during initial range of motion. METHODS: Eight volunteers held their arm against gravity 15° intervals from 30° to 150° in scaption. Shear-wave elastography was implemented at each position to measure shear modulus at rest and during muscle contraction, as a surrogate for muscle stiffness, of each partition. Muscle activity was defined as the difference in stiffness values between the resting positions and those during muscle contraction (ΔE = stiffness at contraction-stiffness at rest). RESULTS: The activity value for the middle partition was 25.1 ± 10.8 kPa at 30° and increased up to 105° (52.2 ± 10.8 kPa), with a subsequent decrease at larger angle positions (p < .001). The superior partition showed a flatter and constant behavior with smaller activity values except at higher angles (p < .001). Peak activity values for the superior partition were observed at 135° (23.0 ± 12.0 kPa). Increase activity for inferior partition began at 60° and showed a peak at 135° (p < .001; 32.9 ± 13.8 kPa). CONCLUSION: Stiffness measured using shear-wave elastography in each partition of the infraspinatus muscle demonstrated different behavior between these partitions during scaption. The middle partition generated force throughout scaption, while the superior and inferior partitions exerted force at end range.

Density-Dependent Material and Failure Criteria Equations Highly Affect the Accuracy and Precision of QCT/FEA-Based Predictions of Osteoporotic Vertebral Fracture Properties.

About 700,000 vertebral fractures occur in the US as a result of bone loss. Quantitative computed tomography (QCT)-based finite element analysis (FEA) is a promising tool for fracture risk prediction that is becoming attractive in the clinical setting. The goals of this study were (1) to perform individual and pooled specimen optimization using inverse QCT/FEA modeling to obtain ash density-elastic modulus equations incorporating the whole vertebral body and accounting for all variables used during FE modeling, and (2) to determine the effect of material equations and failure criteria on the accuracy and precision of mechanical properties. Fifty-four (54) human vertebrae were used to optimize material equations based on experimental outcomes and, together with a previously proposed material equation, were implemented in our models using three different failure criteria to obtain fracture loads. Our robust QCT/FEA approach predicted 78% of the failure loads. Material equations resulted in poor accuracy in the predicted stiffness, yet yielded good precision and, more importantly, strong correlations with fracture loads. Both material and fracture criterion equations are equally important in estimating accurate and precise QCT/FEA predictions. Results suggest that both elastic modulus and fracture criterion equations should be validated against experimental outcomes to better explain the response of the tissue under various conditions.