Impact of wastewater infrastructure improvements on beach water fecal indicator bacteria levels in Monroe County, Florida.

The effects of wastewater infrastructure construction on regional and local environments is unknown. This project evaluated the effects of such projects in Monroe County, Florida, an area that had undergone regional wastewater infrastructure improvements. We used fecal indicator bacteria (FIB) (fecal coliform and enterococci), as a proxy indicator of beach water quality for an 18-year period of record. At the highest level of aggregation, FIBs for all 17 beaches within the county were combined to evaluate trends on a yearly basis. At the lower level, yearly FIB trends were evaluated for each beach separately. FIB data on infrastructure project period (categorical variables: before, during, and after construction), and the influences of environmental conditions (quantitative variables of rainfall and temperature) were also evaluated. In the multiple regression models, enterococci and fecal coliform were significantly associated with rainfall (24 h, p < 0.0001) and water temperature (p < 0.0001) when only the quantitative variables were considered. When both categorical and quantitative variables were considered, project period was significant for enterococci (p < 0.0001) and fecal coliform (p < 0.0001), as was 24 h lagged rainfall. Overall, the most significant factors for both fecal coliform and enterococci were rainfall and project period. Considering all beaches, infrastructure projects seem to have the collective desired effects in the years following construction, as there were decreased FIBs measured at beach sites. Only through the aggregation of all projects and measurements at all beach sites could the decreases in FIB levels be observed. Local analysis is needed to explain anomalies from these general trends for specific beaches. This understanding of FIBs, their responses to environmental and project factors, and the need for aggregated and local site analysis can provide guidance to managers at other locations with similar issues of failing wastewater infrastructure and frequent FIB exceedances.

Independent fermentation and metabolism of dietary polyphenols associated with a plant cell wall model.

Ingested polyphenols from plant-based foods are in part carried to the large intestine and metabolised by resident microbiota. This work investigated the release and microbial transformation of polyphenols adsorbed individually or in combination to apple cell walls (ACW) and pure (bacterial) cellulose (BC). BC and ACW, representing poorly- and highly-fermentable fibre models respectively, were used to investigate influences of interactions with polyphenols (cyanidin-3-glucoside, (±)-catechin, ferulic acid), on the release and microbial metabolism of polyphenols during in vitro digestion and fermentation. Bound polyphenols were partially released (20-70%) during simulated digestion, depending on polyphenol molecular structure. All remaining bound polyphenols were completely released and metabolised after 6-9 h by porcine large intestine microbiota, with formation of a number of intermediates and end-products. The same pathways of polyphenol microbial metabolism were observed in the presence and absence of ACW/BC, suggesting that microbial metabolism of polyphenols and carbohydrate substrates seems likely independent. Some polyphenol metabolism products were produced faster in the presence of carbohydrate fermentation, particularly of ACW. Microbial metabolism pathways of model polyphenols by a porcine faecal inoculum are not affected by being associated with BC or ACW, but the rate of metabolism is modestly enhanced with concurrent carbohydrate fermentation.

Proliferation of microalgae and enterococci in the Lake Okeechobee, St. Lucie, and Loxahatchee watersheds.

This study is an analysis of relationships between microalgae (measured as chlorophyll a) and the fecal indicator bacteria enterococci. Microalgae blooms and enterococci exceedances have been occurring in Florida's recreational waterways for years. More recently, this has become a management concern as microalgae blooms have been attributed to potentially toxic cyanobacteria, and enterococci exceedances link to human infection/illness. Since both the microalgal blooms and bacterial exceedances occur in regions that receive managed freshwater releases from Lake Okeechobee, we hypothesized that both the blooms and exceedances are related to excess nutrients from the lake. Two experimental sites, on Lake Okeechobee and the St. Lucie River (downstream of the lake), plus a control site on the Loxahatchee River (which does not receive lake flow) were evaluated. The hypothesis was evaluated through three study components: 1) analysis of available long-term data from local environmental databases, 2) a year-long monthly sampling and analysis of chlorophyll a, enterococci, nutrients, and physical-chemical data, and 3) microcosm experiments with altered water/sediment conditions. Results support the hypothesis that excess nutrients play a role in both chlorophyll a and enterococci levels. For the St. Lucie River, analyses indicate that chlorophyll a correlated significantly with total Kjeldahl nitrogen (TKN) (R2 = 0.30, p = 0.008) and the strongest model for enterococci included nitrate-nitrite, TKN, total phosphorus, orthophosphorus, and turbidity in our long-term analysis (n = 39, R2 = 0.83, p ≤ 0.001). The microcosm results indicated that chlorophyll a and enterococci only persisted for 36 h in water from all sources, and that sediments from Lake Okeechobee may have allowed for sustained levels of chlorophyll a and enterococci levels. Overall similarities were observed in chlorophyll a and enterococci relationships with nutrient concentrations regardless of a Lake Okeechobee connection, as underscored by a study of flow out of the lake and downstream areas. This suggests that both nutrient-rich lake water and untreated surface water runoff contribute to microalgae blooms and enterococci exceedances in southeast Florida.

Review: Effects of fibre, grain starch digestion rate and the ileal brake on voluntary feed intake in pigs.

Grains rich in starch constitute the primary source of energy for both pigs and humans, but there is incomplete understanding of physiological mechanisms that determine the extent of digestion of grain starch in monogastric animals including pigs and humans. Slow digestion of starch to produce glucose in the small intestine (SI) leads to undigested starch escaping to the large intestine where it is fermented to produce short-chain fatty acids. Glucose generated from starch provides more energy than short-chain fatty acids for normal metabolism and growth in monogastrics. While incomplete digestion of starch leads to underutilised feed in pigs and economic losses, it is desirable in human nutrition to maintain consistent body weight in adults. Undigested nutrients reaching the ileum may trigger the ileal brake, and fermentation of undigested nutrients or fibre in the large intestine triggers the colonic brake. These intestinal brakes reduce the passage rate in an attempt to maximise nutrient utilisation, and lead to increased satiety that may reduce feed intake. The three physiological mechanisms that control grain digestion and feed intake are: (1) gastric emptying rate; (2) interplay of grain digestion and passage rate in the SI controlling the activation of the ileal brake; and (3) fermentation of undigested nutrients or fibre in the large intestine activating the colonic brake. Fibre plays an important role in influencing these mechanisms and the extent of their effects. In this review, an account of the physiological mechanisms controlling the passage rate, feed intake and enzymatic digestion of grains is presented: (1) to evaluate the merits of recently developed methods of grain/starch digestion for application purposes; and (2) to identify opportunities for future research to advance our understanding of how the combination of controlled grain digestion and fibre content can be manipulated to physiologically influence satiety and food intake.

Complexity and health functionality of plant cell wall fibers from fruits and vegetables.

The prevalence of lifestyle-related diseases is increasing in developing countries with the causes for death starting to follow the same pattern in the developed world. Lifestyle factors including inadequate dietary intake of fruits and vegetables and over consumption of nutrient-poor processed foods, are considered to be major causal risk factors associated with increased susceptibility to developing certain diseases (Alldrick, 1998 ; Kiani, 2007 ). Recent epidemiological evidence confirms a strong association between dietary fiber and reduced all-cause mortality risk, as well as a risk reduction for a number of non-communicable diseases (Chuang et al., 2012 ). The relationship between dietary fiber and mortality has been described as "convincing observations that call for mechanistic investigations" (Landberg, 2012 ). In particular, the health protective roles played by dietary fibers of different origin are not well understood. Whilst Hippocrates was the earliest known physician to study the health benefits of fiber derived from grains (Burkitt, 1987 ), the functionality of fruit and vegetable fiber, especially in association with other compounds such as polyphenols and carotenoids, is an area of more recent interest. Hence the objective of this review is to assess the complexity and health-related functional role of plant cell wall (PCW) fibers from fruits and vegetables with a particular emphasis on interactions between cell walls and phytonutrients.

Faecal pollution along the southeastern coast of Florida and insight into the use of pepper mild mottle virus as an indicator.

AIMS: To identify faecal pollution along the southeastern Florida coast and determine the performance of a reverse transcription-quantitative polymerase chain reaction (RT-qPCR) method for pepper mild mottle virus (PMMoV). METHODS AND RESULTS: In 2014, bimonthly surface water samples were collected from inlets, exposed to runoff and septic seepage, and coastal sites, exposed to ocean outfalls. Analysis of culturable enterococci and a suite of microbial source tracking (MST) markers (BacHum, CowM2, DogBact, HF183, HPyV, PMMoV) revealed faecal pollution, primarily of human origin, at all sites. Since PMMoV was detected more frequently than other MST markers, the process limits of quantification (undiluted to 10-2 dilution) and detection (10-2 dilution) for the RT-qPCR method were determined by seeding untreated wastewater into the coastal waters. Simulated quantitative microbial risk assessment, employing human norovirus as a reference pathogen, calculated a 0·286 median risk of gastrointestinal illness associated with the PMMoV limit of detection. CONCLUSIONS: All sites met the U.S. EPA recreational water criteria, despite detection of domestic wastewater-associated MST markers. PMMoV correlated only with human-associated MST markers. SIGNIFICANCE AND IMPACT OF THE STUDY: This study demonstrated that PMMoV is an important domestic wastewater-associated marker that should be included in the MST toolbox; therefore, future studies should thoroughly investigate the health risks associated with its detection and quantification in environmental waters.

Micromechanical model of biphasic biomaterials with internal adhesion: Application to nanocellulose hydrogel composites.

The mechanical properties of hydrated biomaterials are non-recoverable upon unconfined compression if adhesion occurs between the structural components in the material upon fluid loss and apparent plastic behaviour. We explore these micromechanical phenomena by introducing an aggregation force and a critical yield pressure into the constitutive biphasic formulation for transversely isotropic tissues. The underlying hypothesis is that continual fluid pressure build-up during compression temporarily supresses aggregation. Once compression stops and the pressure falls below some critical value, internal aggregation occurs over a time scale comparable to the poroelastic time. We demonstrate this model by predicting the mechanical response of bacterial nanocellulose hydrogel composites, which are promising biomaterials and a structural mimetic for the plant cell wall. Cross-linking of cellulose by xyloglucan creates an extensional resistance and substantially increases the compressive modulus under large compression and densification. In comparison, incorporating non-crosslinking arabinoxylan into the hydrogel has little effect on its mechanics at the strain rates investigated. These results assist in elucidating the mechanical role of these polysaccharides in the complex plant cell wall structure. They also suggest xyloglucan is a suitable candidate to tailor the stiffness of nanocellulose hydrogels in biomaterial design, which includes modulating cell-adhesion in tissue engineering applications. The model and overall approach may be utilised to characterise and design a myriad of biomaterials and mammalian tissues, particularly those with a fibrillar structure. STATEMENT OF SIGNIFICANCE: The mechanical properties of hydrated biomaterials can be non-recoverable upon compression due to increased adhesion occurring between the structural components in the material. Cellulose-hemicellulose composite hydrogels constitute a classical example of this phenomenon, since fibres can freely re-orient and adhere upon fluid loss to produce significant variations in the mechanical response to compression. Here, we model their micromechanics by introducing an aggregation force and a critical yield pressure into the constitutive formulation for transversely isotropic biphasic materials. The resulting model is easy to implement for routine characterization of this type of hydrated biomaterials through unconfined compression testing and produces physically meaningful and reproducible mechanical parameters.

Interpreting atomic force microscopy nanoindentation of hierarchical biological materials using multi-regime analysis.

We present a novel Multi-Regime Analysis (MRA) routine for interpreting force indentation measurements of soft materials using atomic force microscopy. The MRA approach combines both well established and semi-empirical theories of contact mechanics within a single framework to deconvolute highly complex and non-linear force-indentation curves. The fundamental assumption in the present form of the model is that each structural contribution to the mechanical response acts in series with other 'mechanical resistors'. This simplification enables interpretation of the micromechanical properties of materials with hierarchical structures and it allows automated processing of large data sets, which is particularly indispensable for biological systems. We validate the algorithm by demonstrating for the first time that the elastic modulus of polydimethylsiloxane (PDMS) films is accurately predicted from both approach and retraction branches of force-indentation curves. For biological systems with complex hierarchical structures, we show the unique capability of MRA to map the micromechanics of live plant cells, revealing an intricate sequence of mechanical deformations resolved with precision that is unattainable using conventional methods of analysis. We recommend the routine use of MRA to interpret AFM force-indentation measurements for other complex soft materials including mammalian cells, bacteria and nanomaterials.

Micromechanics and poroelasticity of hydrated cellulose networks.

The micromechanics of cellulose hydrogels have been investigated using a new rheological experimental approach, combined with simulation using a poroelastic constitutive model. A series of mechanical compression steps at different strain rates were performed as a function of cellulose hydrogel thickness, combined with small amplitude oscillatory shear after each step to monitor the viscoelasticity of the sample. During compression, bacterial cellulose hydrogels behaved as anisotropic materials with near zero Poisson's ratio. The micromechanics of the hydrogels altered with each compression as water was squeezed out of the structure, and microstructural changes were strain rate-dependent, with increased densification of the cellulose network and increased cellulose fiber aggregation observed for slower compressive strain rates. A transversely isotropic poroelastic model was used to explain the observed micromechanical behavior, showing that the mechanical properties of cellulose networks in aqueous environments are mainly controlled by the rate of water movement within the structure.

Binding of polyphenols to plant cell wall analogues - Part 2: Phenolic acids.

Bacterial cellulose and cellulose-pectin composites were used as well-defined model plant cell wall (PCW) systems to study the interaction between phenolic acids (PA) derived from purple carrot juice concentrate (PCJC) and PCW components. Significant PA depletion from solution occurred, with pure cellulose initially (30s-1h) absorbing more than cellulose-pectin composites in the first hour (ca 20% cf 10-15%), but with all composites absorbing similar levels (ca 30%) after several days. Individual PAs bound to different relative extents with caffeic acid>chlorogenic acid>ferulic acid. Extrapolation of data for these model systems to carrot puree suggests that nutritionally-significant amounts of PAs could bind to cell walls, potentially restricting bioavailability in the small intestine and, as a consequence, delivering PAs to the large intestine for fermentation and metabolism by gut bacteria.

Investigation and quantification of key periodontal pathogens in patients with type 2 diabetes.

BACKGROUND AND OBJECTIVE: Diabetes is a recognized risk factor for periodontitis. There are conflicting data regarding whether healthy diabetic patients or diabetic patients with chronic periodontitis have an altered subgingival microbiota compared with nondiabetic individuals. The aim of the present study was to detect quantitative differences in selected periodontopathogens in the subgingival plaque of diabetic patients using TaqMan quantitative PCR. MATERIAL AND METHODS: Type 2 diabetes mellitus patients with (n=9) or without chronic periodontal disease (n=15) were recruited and matched to nondiabetic control subjects (n=12 periodontally healthy, n=12 chronic periodontitis). Subgingival plaque samples were collected from deep (>4 mm probing depth) and shallow sites (≤3 mm probing depth) using paper points, and Aggregatibacter actinomycetemcomitans, Fusobacterium nucleatum and Porphyromonas gingivalis were quantified. RESULTS: Forty-eight subjects (69 samples) were recruited. Marked differences were seen in the levels of all three bacterial species, relative to the total bacterial population, according to periodontal health status. Using real-time quantitative PCR, bacterial counts for P. gingivalis were significantly higher in deep pockets of diabetic and nondiabetic subjects compared with periodontally healthy subjects (p<0.05) but did not differ significantly between diabetics and nondiabetics. A. actinomycetemcomitans was detected in all groups in low quantities, and counts did not differ significantly between groups (p>0.05). F. nucleatum was abundant in all groups, with no clear significant differences between groups. P. gingivalis was found in higher quantities in periodontitis than in periodontally healthy subjects (p<0.05). Statistically significant positive correlations were identified between pocket depth and counts for all three species tested (p<0.05). CONCLUSION: A. actinomycetemcomitans, F. nucleatum and P. gingivalis were present in significantly different quantities and proportions in subgingival plaque, according to periodontal disease status. No significant differences were identified between the subgingival microbiota of type 2 diabetes mellitus patients compared with nondiabetic subjects.

Indicator microbes correlate with pathogenic bacteria, yeasts and helminthes in sand at a subtropical recreational beach site.

AIMS: Research into the relationship between pathogens, faecal indicator microbes and environmental factors in beach sand has been limited, yet vital to the understanding of the microbial relationship between sand and the water column and to the improvement of criteria for better human health protection at beaches. The objectives of this study were to evaluate the presence and distribution of pathogens in various zones of beach sand (subtidal, intertidal and supratidal) and to assess their relationship with environmental parameters and indicator microbes at a non-point source subtropical marine beach. METHODS AND RESULTS: In this exploratory study in subtropical Miami (Florida, USA), beach sand samples were collected and analysed over the course of 6 days for several pathogens, microbial source tracking markers and indicator microbes. An inverse correlation between moisture content and most indicator microbes was found. Significant associations were identified between some indicator microbes and pathogens (such as nematode larvae and yeasts in the genus Candida), which are from classes of microbes that are rarely evaluated in the context of recreational beach use. CONCLUSIONS: Results indicate that indicator microbes may predict the presence of some of the pathogens, in particular helminthes, yeasts and the bacterial pathogen Staphylococcus aureus including methicillin-resistant forms. Indicator microbes may thus be useful for monitoring beach sand and water quality at non-point source beaches. SIGNIFICANCE AND IMPACT OF THE STUDY: The presence of both indicator microbes and pathogens in beach sand provides one possible explanation for human health effects reported at non-point sources beaches.

Investigation of the microstructure of milk protein concentrate powders during rehydration: alterations during storage.

The aim of this work was to use scanning electron microscopy to investigate the microstructure of rehydrated milk protein concentrate powder (MPC) particles. A sample preparation method for scanning electron microscopy analysis of rehydrated MPC particles is described and used to characterize the time course of dissolution and the effects of prior storage on the dissolution process. The results show that a combination of different types of interactions (e.g., bridges, direct contact) between casein micelles results in a porous, gel-like structure that restrains the dispersion of individual micelles into the surrounding liquid phase without preventing water penetration and solubilization of nonmicellar components. During storage of the powder, increased interactions occur between and within micelles, leading to compaction of micelles and the formation of a monolayer skin of casein micelles packed close together, the combination of which are proposed to be responsible for the slow dissolution of stored MPC powders.

Influence of different carbon sources on bacterial cellulose production by Gluconacetobacter xylinus strain ATCC 53524.

AIMS: To determine the effect of carbon sources on cellulose produced by Gluconacetobacter xylinus strain ATCC 53524, and to characterize the purity and structural features of the cellulose produced. METHODS AND RESULTS: Modified Hestrin Schramm medium containing the carbon sources mannitol, glucose, glycerol, fructose, sucrose or galactose were inoculated with Ga. xylinus strain ATCC 53524. Plate counts indicated that all carbon sources supported growth of the strain. Sucrose and glycerol gave the highest cellulose yields of 3.83 and 3.75 g l(-1) respectively after 96 h fermentation, primarily due to a surge in cellulose production in the last 12 h. Mannitol, fructose or glucose resulted in consistent rates of cellulose production and yields of >2.5 g l(-1). Solid state (13)C CP/MAS NMR revealed that irrespective of the carbon source, the cellulose produced by ATCC 53524 was pure and highly crystalline. Scanning electron micrographs illustrated the densely packed network of cellulose fibres within the pellicles and that the different carbon sources did not markedly alter the micro-architecture of the resulting cellulose pellicles. CONCLUSIONS: The production rate of bacterial cellulose by Ga. xylinus (ATCC 53524) was influenced by different carbon sources, but the product formed was indistinguishable in molecular and microscopic features. SIGNIFICANCE AND IMPACT OF THE STUDY: Our studies for the first time examined the influence of different carbon sources on the rate of cellulose production by Ga. xylinus ATCC 53524, and the molecular and microscopic features of the cellulose produced.

Hydrocolloid gel particles: formation, characterization, and application.

Hydrocolloid gel particles of micron and sub-micron size are particularly attractive for use in many applications in the food, agricultural, pharmaceutical, and chemical industries, due to their biocompatibility, perception as "natural" materials, and soft-solid texture. Industrial applications for such particles include uses as texturizers in confectionery and cosmetic products, slow-release encapsulation agents for flavors, nutrients, and pharmaceutical products, and thickeners in soups and sauces. Properties such as particle size, hardness, shape, texture, and molecular release rates can be important for individual applications. In addition, product formats will determine specific needs for physical form (e.g. dry or wet) and compatibility with other components. The diverse range of potential applications for hydrocolloid gel particles provide a driver for understanding-led tailoring of raw material and process conditions. This review introduces some of the materials that are used to form hydrocolloid gel particles and the corresponding gel formation mechanisms. One issue of importance in the production of hydrocolloid gel particles is the control of particle properties, such as release profiles, strength, and detectability within products. An alternative technique to traditional methods of hydrocolloid gel particle production is evaluated and a model for control of particle size, and subsequently other particle properties, is proposed. Key properties of hydrocolloid gel particles are identified and characterization methods for evaluating these properties are described.

Potential of a nisin-containing bacterial cellulose film to inhibit Listeria monocytogenes on processed meats.

A bacterially produced cellulose film containing nisin was developed and used in a proof-of-concept study to control Listeria monocytogenes and total aerobic bacteria on the surface of vacuum-packaged frankfurters. Bacterial cellulose pellicles were produced by Gluconacetobacter xylinus K3 in Corn Steep Liquor-Mannitol Medium and were subsequently purified before nisin was incorporated into them. Investigations into the effect of nisin concentrations and contact times on incorporation of nisin into cellulose films showed that the lowest nisin concentration and shortest time needed for production of an effective antimicrobial cellulose film were 625IUml(-1) and 6h, respectively. The active cellulose films produced under these conditions did not, however, significantly reduce L. monocytogenes populations on frankfurters (P>0.05) during refrigerated storage for 14 days as compared to the controls. Films produced using a higher concentration of nisin (2500IUml(-1)) with the same exposure time (6h) resulted in a significant (P<0.05) decrease in L. monocytogenes counts on frankfurters of approximately 2logCFUg(-1) after 14 days of storage as compared to the control. Both the above-mentioned films showed a similar effectiveness in reducing total aerobic bacterial populations as measured by total aerobic plate counts on frankfurters. For both films, total aerobic bacterial levels were significantly (P>0.05) reduced by approximately 3.3logCFUg(-1) after 14 days of storage as compared to control samples. Bacterial cellulose films were demonstrated in this study to have potential applicability as antimicrobial packaging films or inserts for processed meat products.

Impacts of Hurricanes Katrina and Rita on the microbial landscape of the New Orleans area.

Floodwaters in New Orleans from Hurricanes Katrina and Rita were observed to contain high levels of fecal indicator bacteria and microbial pathogens, generating concern about long-term impacts of these floodwaters on the sediment and water quality of the New Orleans area and Lake Pontchartrain. We show here that fecal indicator microbe concentrations in offshore waters from Lake Pontchartrain returned to prehurricane concentrations within 2 months of the flooding induced by these hurricanes. Vibrio and Legionella species within the lake were more abundant in samples collected shortly after the floodwaters had receded compared with samples taken within the subsequent 3 months; no evidence of a long-term hurricane-induced algal bloom was observed. Giardia and Cryptosporidium were detected in canal waters. Elevated levels of fecal indicator bacteria observed in sediment could not be solely attributed to impacts from floodwaters, as both flooded and nonflooded areas exhibited elevated levels of fecal indicator bacteria. Evidence from measurements of Bifidobacterium and bacterial diversity analysis suggest that the fecal indicator bacteria observed in the sediment were from human fecal sources. Epidemiologic studies are highly recommended to evaluate the human health effects of the sediments deposited by the floodwaters.

Haemophilus influenzae Type b disease among Amish children in Pennsylvania: reasons for persistent disease.

OBJECTIVE: To identify reservoirs of Haemophilus influenzae type b (Hib) pharyngeal carriage and assess barriers to vaccination among 2 Amish communities in Pennsylvania. METHODS: We investigated recent cases, performed community surveys for Hib vaccination coverage and pharyngeal carriage, and administered a questionnaire assessing vaccination knowledge and attitudes to 298 members of 2 Amish communities (A and B) in Pennsylvania and, as a comparison group, 136 non-Amish family members who participated in state immunization clinics. From December 1999 to February 2000, 8 cases of invasive Hib disease occurred among children who were 5 years of age or younger in Pennsylvania. Six of the case-patients were from Amish communities. None of the children had been vaccinated. RESULTS: Among children who were 5 years of age or younger, Hib vaccine coverage was low in the 2 Amish communities: A (9 [28%] of 32) and B (3 [7%] of 41) compared with the non-Amish group (19 [95%] of 20). Hib carriage prevalence was higher in both Amish communities than in the non-Amish group (A: 3%; B: 8%; non-Amish: 0%). More households in community B had 1 or more Hib carriers than in community A (8 [28%] of 29 vs 3 [9%] of 32). Among Amish parents who did not vaccinate their children, only 25% (13 of 51) identified either religious or philosophical objections as a factor; 51% (26 of 51) reported that vaccinating was not a priority compared with other activities of daily life. Seventy-three percent (36 of 49) would vaccinate their children if vaccination were offered locally. CONCLUSIONS: Undervaccinated communities in the United States still exist and allow circulation of Hib strains, resulting in disease among susceptible children. Identification of undervaccinated populations, such as the Amish, and targeted education and vaccination campaigns are essential to achieving elimination of Hib disease.

Structure of Acetobacter cellulose composites in the hydrated state.

The structure of composites produced by the bacterium Acetobacter xylinus have been studied in their natural, hydrated, state. Small-angle X-ray diffraction and environmental scanning electron microscopy has shown that the ribbons have a width of 500 A and contain smaller semi-crystalline cellulose microfibrils with an essentially rectangular cross-section of approximately 10 x 160 A(2). Incubation of Acetobacter in xyloglucan or pectin results in no changes in the size of either the microfibrils or the ribbons. Changes in the cellulose crystals are seen upon dehydration of the material, resulting in either a reduction in crystal size or an increase in crystal disorder.

The phase transformations in starch during gelatinisation: a liquid crystalline approach.

The analogy between starch and a chiral side-chain polymeric liquid crystal is examined in relation to the processes involved during gelatinisation. There are three important parameters for characterisation of the molecular phase behaviour of the amylopectin: the lamellar order parameter (psi), the orientational order parameter of the amylopectin double helices (phi), and the helicity of the sample (h, the helix/coil ratio, a measure of the helix-coil transition of the double helices). The coupling between the double helices and the backbone through the flexible spacers is affected dramatically by the water content and it is this factor which dictates the particular phase adopted by the amylopectin inside the starch granule as a function of temperature. SAXS, WAXS and 13C CP/MAS NMR are used to examine these phenomena in excess water. Furthermore, previous experimental evidence pertaining to the limiting water case is reviewed with respect to this new theoretical framework.