RESUMEN
Soil salinity is a major contributor to crop yield losses. To improve our understanding of root responses to salinity, we developed and exploited a real-time salt-induced tilting assay. This assay follows root growth upon both gravitropic and salt challenges, revealing that root bending upon tilting is modulated by Na+ ions, but not by osmotic stress. Next, we measured this salt-specific response in 345 natural Arabidopsis (Arabidopsis thaliana) accessions and discovered a genetic locus, encoding the cell wall-modifying enzyme EXTENSIN ARABINOSE DEFICIENT TRANSFERASE (ExAD) that is associated with root bending in the presence of NaCl (hereafter salt). Extensins are a class of structural cell wall glycoproteins known as hydroxyproline (Hyp)-rich glycoproteins, which are posttranslationally modified by O-glycosylation, mostly involving Hyp-arabinosylation. We show that salt-induced ExAD-dependent Hyp-arabinosylation influences root bending responses and cell wall thickness. Roots of exad1 mutant seedlings, which lack Hyp-arabinosylation of extensin, displayed increased thickness of root epidermal cell walls and greater cell wall porosity. They also showed altered gravitropic root bending in salt conditions and a reduced salt-avoidance response. Our results suggest that extensin modification via Hyp-arabinosylation is a unique salt-specific cellular process required for the directional response of roots exposed to salinity.
RESUMEN
Plants prevent disease by passively and actively protecting potential entry routes against invading microbes. For example, the plant immune system actively guards roots, wounds, and stomata. How plants prevent vascular disease upon bacterial entry via guttation fluids excreted from specialized glands at the leaf margin remains largely unknown. These so-called hydathodes release xylem sap when root pressure is too high. By studying hydathode colonization by both hydathode-adapted (Xanthomonas campestris pv. campestris) and non-adapted pathogenic bacteria (Pseudomonas syringae pv. tomato) in immunocompromised Arabidopsis mutants, we show that the immune hubs BAK1 and EDS1-PAD4-ADR1 restrict bacterial multiplication in hydathodes. Both immune hubs effectively confine bacterial pathogens to hydathodes and lower the number of successful escape events of an hydathode-adapted pathogen toward the xylem. A second layer of defense, which is dependent on the plant hormones' pipecolic acid and to a lesser extent on salicylic acid, reduces the vascular spread of the pathogen. Thus, besides glands, hydathodes represent a potent first line of defense against leaf-invading microbes.
Asunto(s)
Arabidopsis , Hojas de la Planta/microbiología , Bacterias , Inmunidad de la Planta , Enfermedades de las Plantas/microbiologíaRESUMEN
SUMO is a protein modification whose conjugate levels peak during acute heat stress. We find that SUMO is also critical for plant longevity when Arabidopsis experiences a prolonged non-damaging period of only 28 degrees Celsius. Remarkably, this thermo-lethality at 28 degrees was not seen with any other mutant of the SUMO pathway tested. Autoimmunity due to low SUMO1/2 expression levels was not causal for this thermo-lethality. The role of SUMO for thermo-resilience was also distinct from its requirement for thermomorphogenesis - a growth response triggered by the same warm temperature, as only the latter response was dependent on the SUMO ligase SIZ1 as well. Thermo-resilience at 28 degrees Celsius and (acquired) thermotolerance (a response that allows plants to recover and acclimate to brief extreme temperatures) both depend on the HEAT SHOCK TRANSCRIPTION FACTOR A1 (HSFA1). Acquired thermotolerance was, however, normal in the sumo1/2 knockdown mutant. Thus, SUMO-dependent thermo-resilience is potentially controlled in a different way than the protein damage pathway that underpins thermotolerance. Close inspection of shoot apices revealed that the cell patterning and tissue integrity of the shoot apex of the SUMO1/2 knockdown mutant was lost at 28, but not 22 degrees Celsius. We thus describe a novel SUMO-dependent phenotype.
RESUMEN
Our knowledge about the gut microbiota of pigs is still scarce, despite the importance of these animals for biomedical research and agriculture. Here, we present a collection of cultured bacteria from the pig gut, including 110 species across 40 families and nine phyla. We provide taxonomic descriptions for 22 novel species and 16 genera. Meta-analysis of 16S rRNA amplicon sequence data and metagenome-assembled genomes reveal prevalent and pig-specific species within Lactobacillus, Streptococcus, Clostridium, Desulfovibrio, Enterococcus, Fusobacterium, and several new genera described in this study. Potentially interesting functions discovered in these organisms include a fucosyltransferase encoded in the genome of the novel species Clostridium porci, and prevalent gene clusters for biosynthesis of sactipeptide-like peptides. Many strains deconjugate primary bile acids in in vitro assays, and a Clostridium scindens strain produces secondary bile acids via dehydroxylation. In addition, cells of the novel species Bullifex porci are coccoidal or spherical under the culture conditions tested, in contrast with the usual helical shape of other members of the family Spirochaetaceae. The strain collection, called 'Pig intestinal bacterial collection' (PiBAC), is publicly available at www.dsmz.de/pibac and opens new avenues for functional studies of the pig gut microbiota.
Asunto(s)
Bacterias/clasificación , Bacterias/aislamiento & purificación , Microbioma Gastrointestinal , Intestinos/microbiología , Filogenia , Porcinos/microbiología , Anciano de 80 o más Años , Animales , Bacterias/genética , Bacterias/metabolismo , Ácidos y Sales Biliares/metabolismo , Biodiversidad , Clostridium/clasificación , Clostridium/genética , Clostridium/aislamiento & purificación , Heces/microbiología , Femenino , Microbioma Gastrointestinal/genética , Genes Bacterianos/genética , Especificidad del Huésped , Humanos , Masculino , Metagenoma , Familia de Multigenes , ARN Ribosómico 16SRESUMEN
The spread of multi-drug resistance and the slow pace at which antibiotics come onto the market are undermining our ability to treat human infections, leading to high mortality rates. Aiming to overcome this global crisis, antimicrobial peptides are considered promising alternatives to counter bacterial infections with multi-drug resistant bacteria. The cathelicidins comprise a well-studied class of AMPs whose members have been used as model molecules for sequence modifications, aiming at enhanced biological activities and stability, along with reduced toxic effects on mammalian cells. Here, we describe the antimicrobial activities, modes of action and structural characterization of two novel cathelicidin-like peptides, named BotrAMP14 and CrotAMP14, which were re-designed from snake batroxicidin and crotalicidin, respectively. BotrAMP14 and CrotAMP14 showed broad-spectrum antibacterial activity against susceptible microorganisms and clinical isolates with minimal inhibitory concentrations ranging from 2-35.1 µM. Moreover, both peptides had low cytotoxicity against Caco-2 cells in vitro. In addition, in vivo toxicity against Galleria mellonella moth larvae revealed that both peptides led to>76% larval survival after 144 h. Microscopy studies suggest that BotrAMP14 and CrotAMP14 destabilize E. coli membranes. Furthermore, circular dichroism and molecular dynamics simulations indicate that, in a membrane-like environment, both peptides adopt α-helical structures that interact with bilayer phospholipids through hydrogen bonds and electrostatic interaction. Thus, we concluded that BotrAMP14 and CrotAMP14 are helical membrane active peptides, with similar antibacterial properties but lower cytotoxicity than the larger parent peptides batroxicidin and crotalicidin, having advantages for drug development strategies.
Asunto(s)
Péptidos Catiónicos Antimicrobianos/química , Catelicidinas/química , Secuencia de Aminoácidos , Animales , Péptidos Catiónicos Antimicrobianos/farmacología , Células CACO-2 , Supervivencia Celular/efectos de los fármacos , Pared Celular/efectos de los fármacos , Pared Celular/metabolismo , Escherichia coli/efectos de los fármacos , Escherichia coli/metabolismo , Humanos , Enlace de Hidrógeno , Larva/efectos de los fármacos , Membrana Dobles de Lípidos/química , Membrana Dobles de Lípidos/metabolismo , Simulación de Dinámica Molecular , Mariposas Nocturnas/efectos de los fármacos , Mariposas Nocturnas/crecimiento & desarrollo , Conformación Proteica en Hélice alfa , Electricidad EstáticaRESUMEN
During electrophoretic deposition of graphene oxide (GO) sheets on silicon substrates, not only deposition but also simultaneous anodic oxidation of the silicon substrate takes place, leading to a three-layered material. Scanning electron microscopy images reveal the presence of GO sheets on the silicon substrate, and this is also confirmed by X-ray photoelectron spectroscopy (XPS), albeit that the carbon portion increases with increasing emission angle, hinting at a thin carbon layer. With increasing applied potential and increasing conductivity of the GO solution, the carbon signal decreases, whereas the overall thickness of the added layer formed on top of the silicon substrate increases. Through XPS spectra in which the Si 2p peaks shifted under those conditions to 103-104 eV, we were able to conclude that significant amounts of oxygen are present, indicative of the formation of an oxide layer. This leads us to conclude that GO can be deposited using electrophoretic deposition, but that at the same time, silicon is oxidized, which may overshadow effects previously assigned to GO deposition.
RESUMEN
Fungi are strongly affected by their physical environment. Microfabrication offers the possibility of creating new culture environments and ecosystems with defined characteristics. Here, we report the isolation of a novel member of the fungal genus Acremonium using a microengineered cultivation chip. This isolate was unusual in that it organizes into macroscopic structures when initially cultivated within microwells with a porous aluminum oxide (PAO) base. These "templated mycelial bundles" (TMB) were formed from masses of parallel hyphae with side branching suppressed. TMB were highly hydrated, facilitating the passive movement of solutes along the bundle. By using a range of culture chips, it was deduced that the critical factors in triggering the TMB were growth in microwells from 50 to 300 µm in diameter with a PAO base. Cultivation experiments, using spores and pigments as tracking agents, indicate that bulk growth of the TMB occurs at the base. TMB morphology is highly coherent and is maintained after growing out of the microwells. TMB can explore their environment by developing unbundled lateral hyphae; TMB only followed if nutrients were available. Because of the ease of fabricating numerous microstructures, we suggest this is a productive approach for exploring morphology and growth in multicellular microorganisms and microbial communities.
RESUMEN
Many biological materials are composite structures, interpenetrating networks of different types of fibers. The composite nature of such networks leads to superior mechanical properties, but the origin of this mechanical synergism is still poorly understood. Here we study soft composite networks, made by mixing two self-assembling fiber-forming components. We find that the elastic moduli of the composite networks significantly exceed the sum of the moduli of the two individual networks. This mechanical enhancement is in agreement with recent simulations, where it was attributed to a suppression of non-affine deformation modes in the most rigid fiber network due to the reaction forces in the softer network. The increase in affinity also causes a loss of strain hardening and an increase in the critical stress and stain at which the network fails.
Asunto(s)
Dipéptidos/química , Polímeros/química , Microscopía de Fuerza Atómica , Péptidos/química , ReologíaRESUMEN
Several simple methods are presented and evaluated to simulate the X-ray photoelectron spectra (XPS) of organic monolayers and polymeric layers by density functional theory (DFT) and second-order Møller-Plesset theory (MP2) in combination with a series of basis sets. The simulated carbon (C1s) XPS spectra as obtained via B3LYP/6-311G(d,p) or M11/6-311G(d,p) calculations are in good agreement (average mean error <0.3 eV) with the experimental spectra, and good estimates of C1s spectra can be obtained via E(C1s)(exp) = 0.9698EC1s(theory) + 20.34 (in eV) (B3LYP/6-311G(d,p)). As a result, the simulated C1s XPS spectra can elucidate the binding energies of the different carbon species within an organic layer and, in this way, greatly aid the assignment of complicated C1s XPS spectra. The paper gives a wide range of examples, including haloalkanes, esters, (thio-)ethers, leaving groups, clickable functionalities, and bioactive moieties.
Asunto(s)
Alcanos/química , Ésteres/química , Éteres/química , Teoría Cuántica , Estructura Molecular , Espectrofotometría , Rayos XRESUMEN
This paper presents a novel surface engineering approach that combines photochemical grafting and surface-initiated atom transfer radical polymerization (SI-ATRP) to attach zwitterionic polymer brushes onto indium tin oxide (ITO) substrates. The photochemically grafted hydroxyl-terminated organic layer serves as an excellent platform for initiator attachment, and the zwitterionic polymer generated via subsequent SI-ATRP exhibits very good antifouling properties. Patterned polymer coatings can be obtained when the surface with covalently attached initiator was subjected to photomasked UV-irradiation, in which the C-Br bond that is present in the initiator was broken upon exposure to UV light. A further, highly versatile top-functionalization of the zwitterionic polymer brush was achieved by a strain-promoted alkyne-azide cycloaddition, without compromising its antifouling property. The attached bioligand (here: biotin) enables the specific immobilization of target proteins in a spatially confined fashion, pointing to future applications of this approach in the design of micropatterned sensing platforms on ITO substrates.
Asunto(s)
Incrustaciones Biológicas/prevención & control , Polímeros/química , Polímeros/farmacología , Compuestos de Estaño/química , Alquinos/química , Animales , Azidas/química , Biotina/química , Bovinos , Reacción de Cicloadición , Procesos Fotoquímicos , Polimerizacion , Estreptavidina/química , Propiedades de SuperficieRESUMEN
Porous anodic alumina (PAA) is a well-defined material that has found many applications. The range of applications toward sensing and recognition can be greatly expanded if the alumina surface is covalently modified with an organic monolayer. Here, we present a new method for the organic modification of PAA based on the reaction of terminal alkynes with the alumina surface. The reaction results in the the formation of a monolayer within several hours at 80 °C and is dependent on both oxygen and light. Characterization with X-ray photoelectron spectroscopy and infrared spectroscopy indicates formation of a well-defined monolayer in which the adsorbed species is an oxidation product of the 1-alkyne, namely, its α-hydroxy carboxylate. The obtained monolayers are fairly stable in water and at elevated temperatures, as was shown by monitoring the water contact angle. Modification with 1,15-hexadecadiyne resulted in a surface that has alkyne end groups available for further reaction, as was demonstrated by the subsequent reaction of N-(11-azido-3,6,9-trioxaundecyl)trifluoroacetamide with the modified surface. Biofunctionalization was explored by coupling 11-azidoundecyl lactoside to the surface and studying the subsequent adsorption of the lectin peanut agglutinin (PNA) and the yeast Candida albicans, respectively. Selective and reversible binding of PNA to the lactosylated surfaces was demonstrated. Moreover, PNA adsorption was higher on surfaces that exposed the ß-lactoside than on those that displayed the α anomer, which was attributed to surface-associated steric hindrance. Likewise, the lactosylated surfaces showed increased colonization of C. albicans compared to unmodified surfaces, presumably due to interactions involving the cell wall ß-glucan. Thus, this study provides a new modification method for PAA surfaces and shows that it can be used to induce selective adsorption of proteins and microorganisms.
Asunto(s)
Alquinos/química , Óxido de Aluminio/química , Electrodos , Adsorción , Candida albicans/aislamiento & purificación , Espectroscopía de Resonancia Magnética , Espectrometría de Masas , Microscopía Fluorescente , Mycobacterium tuberculosis/aislamiento & purificación , Espectroscopía de Fotoelectrones , Espectrofotometría Infrarroja , Rayos XRESUMEN
The preparation and characterization of self-assembled monolayers on copper with n-alkyl and functional thiols was investigated. Well-ordered monolayers were obtained, while the copper remained oxide-free. Direct attachment of N-succinimidyl mercaptoundecanoate (NHS-MUA) onto the copper surface allowed for the successful attachment of biomolecules, such as ß-d-glucosamine, the tripeptide glutathione, and biotin. Notably, the copper surfaces remained oxide-free even after two reaction steps. All monolayers were characterized by static water contact angle measurements, X-ray photoelectron spectroscopy, and infrared reflection absorption spectroscopy. In addition, the biotinylated copper surfaces were employed in the immobilization of biomolecules such as streptavidin.
Asunto(s)
Alcoholes/química , Ácidos Carboxílicos/química , Cobre/química , Membranas Artificiales , Succinimidas/química , Compuestos de Sulfhidrilo/química , Estructura Molecular , Tamaño de la Partícula , Estreptavidina/química , Propiedades de SuperficieRESUMEN
The grafting of polymers and oligomers of ethylene oxide onto surfaces is widely used to prevent nonspecific adsorption of biological material on sensors and membrane surfaces. In this report, we show for the first time the robust covalent attachment of short oligoethylene oxide-terminated alkenes (CH(3)O(CH(2)CH(2)O)(3)(CH(2))(11)-(CHâCH(2)) [EO(3)] and CH(3)O(CH(2)CH(2)O)(6)(CH(2))(11)-(CHâCH(2)) [EO(6)]) from the reaction of alkenes onto silicon-rich silicon nitride surfaces at room temperature using UV light. Reflectometry is used to monitor in situ the nonspecific adsorption of bovine serum albumin (BSA) and fibrinogen (FIB) onto oligoethylene oxide coated silicon-rich silicon nitride surfaces (EO(n)-Si(x)N(4), x > 3) in comparison with plasma-oxidized silicon-rich silicon nitride surfaces (SiO(y)-Si(x)N(4)) and hexadecane-coated Si(x)N(4) surfaces (C(16)-Si(x)N(4)). A significant reduction in protein adsorption on EO(n)-Si(x)N(4) surfaces was achieved, adsorption onto EO(3)-Si(x)N(4) and EO(6)-Si(x)N(4) were 0.22 mg m(-2) and 0.08 mg m(-2), respectively. The performance of the obtained EO(3) and EO(6) layers is comparable to those of similar, highly protein-repellent monolayers formed on gold and silver surfaces. EO(6)-Si(x)N(4) surfaces prevented significantly the adsorption of BSA (0.08 mg m(-2)). Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), X-ray reflectivity and static water contact angle measurements were employed to characterize the modified surfaces. In addition, the stability of EO(6)-Si(x)N(4) surfaces in phosphate-buffered saline solution (PBS) and alkaline condition (pH 10) was studied. Prolonged exposure of the surfaces to PBS solution for 1 week or alkaline condition for 2 h resulted in only minor degradation of the ethylene oxide moieties and no oxidation of the Si(x)N(4) substrates was observed. Highly stable antifouling coatings on Si(x)N(4) surfaces significantly broaden the application potential of silicon nitride-coated microdevices, and in particular of microfabricated filtration membranes.
Asunto(s)
Materiales Biocompatibles/síntesis química , Óxido de Etileno/síntesis química , Fibrinógeno/química , Albúmina Sérica Bovina/química , Compuestos de Silicona/química , Adsorción , Óxido de Etileno/efectos de la radiación , Ensayo de Materiales , Unión Proteica , Compuestos de Silicona/efectos de la radiación , Rayos UltravioletaRESUMEN
On H-Si(111) surfaces monolayer formation with 1-alkenes results in alkyl monolayers with a Si-C-C linkage, while 1-alkynes yield alkenyl monolayers with a Si-CâC linkage. Recently, considerable structural differences between both types of monolayers were observed, including an increased thickness, improved packing, and higher surface coverage for the alkenyl monolayers. The precise origin thereof could experimentally not be clarified yet. Therefore, octadecyl and octadecenyl monolayers on Si(111) were studied in detail by molecular modeling via PCFF molecular mechanics calculations on periodically repeated slabs of modified surfaces. After energy minimization the packing energies, structural properties, close contacts, and deformations of the Si surfaces of monolayers structures with various substitution percentages and substitution patterns were analyzed. For the octadecyl monolayers all data pointed to a substitution percentage close to 50-55%, which is due the size of the CH(2) groups near the Si surface. This agrees with literature and the experimentally determined coverage of octadecyl monolayers. For the octadecenyl monolayers the minimum in packing energy per chain is calculated around 60% coverage, i.e., close to the experimentally observed value of 65% [Scheres et al. Langmuir 2010, 26, 4790], and this packing energy is less dependent on the substitution percentage than calculated for alkyl layers. Analysis of the chain conformations, close contacts, and Si surface deformation clarifies this, since even at coverages above 60% a relatively low number of close contacts and a negligible deformation of the Si was observed. In order to evaluate the thermodynamic feasibility of the monolayer structures, we estimated the binding energies of 1-alkenes and 1-alkynes to the hydrogen-terminated Si surface at a range of surface coverages by composite high-quality G3 calculations and determined the total energy of monolayer formation by adding the packing energies and the binding energies. It was shown that due to the significantly larger reaction exothermicity of the 1-alkynes, thermodynamically even a substitution percentage as high as 75% is possible for octadecenyl chains. However, because sterically (based on the van der Waals footprint) a coverage of 69% is the maximum for alkyl and alkenyl monolayers, the optimal substitution percentage of octadecenyl monolayers will be presumably close to this latter value, and the experimentally observed 65% is likely close to what is experimentally maximally obtainable with alkenyl monolayers.
RESUMEN
The photothermal laser patterning of functional organic monolayers, prepared on oxide-free hydrogen-terminated silicon, and subsequent backfilling of the laser-written lines with a second organic monolayer that differs in its terminal functionality, is described. Since the thermal monolayer decomposition process is highly nonlinear in the applied laser power density, subwavelength patterning of the organic monolayers is feasible. After photothermal laser patterning of hexadecenyl monolayers, the lines freed up by the laser are backfilled with functional acid fluoride monolayers. Coupling of cysteamine to the acid fluoride groups and subsequent attachment of Au nanoparticles allows easy characterization of the functional lines by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Depending on the laser power and writing speed, functional lines with widths between 1.1 µm and 250 nm can be created. In addition, trifluoroethyl-terminated (TFE) monolayers are also patterned. Subsequently, the decomposed lines are backfilled with a nonfunctional hexadecenyl monolayer, the TFE stripes are converted into thiol stripes, and then finally covered with Au nanoparticles. By reducing the lateral distance between the laser lines, Au-nanoparticle stripes with widths close to 100 nm are obtained. Finally, in view of the great potential of this type of monolayer in the field of biosensing, the ease of fabricating biofunctional patterns is demonstrated by covalent binding of fluorescently labeled oligo-DNA to acid-fluoride-backfilled laser lines, which--as shown by fluorescence microscopy--is accessible for hybridization.
Asunto(s)
Rayos Láser , Nanotecnología/métodos , Silicio/química , ADN/química , Oro/química , Nanopartículas del Metal/química , Microscopía Electrónica de Rastreo , Oligodesoxirribonucleótidos/química , Óxidos/química , Espectrometría de Fluorescencia , Propiedades de SuperficieRESUMEN
Recently, a new method for the preparation of high-quality organic monolayers with 1-alkynes at room temperature in the dark (i.e., without any external activation) was reported. To pinpoint the precise origin of this self-assembly process and to compare the reactivity of 1-alkenes and 1-alkynes toward hydrogen-terminated Si(111) [H-Si(111)], we followed the gradual formation of both monolayers at room temperature by static water contact angle measurements. Subsequently, attenuated total reflection infrared spectroscopy (ATR-IR) and X-ray photoelectron spectroscopy (XPS) were used to obtain detailed information about the structure and quality of the resulting monolayers. Our data clearly demonstrate that 1-alkynes are considerably more reactive toward H-Si(111) than 1-alkenes. 1-Alkynes are able to self-assemble into densely packed hydrophobic monolayers without any external activation (i.e., at room temperature under ambient light and even in the dark) whereas for 1-alkenes under the same conditions hardly any reactivity toward H-Si(111) was observed. The self-assembly of 1-alkynes on H-Si(111) at room temperature is explained by three factors: the higher nucleophilicity of 1-alkynes, which results in a facile attack at the electron-hole pairs at the H-Si surface and easy Si-C bond formation, the stabilization of the beta radical by delocalization over the double bond, and the lower-energy barrier encountered for H abstractions.
RESUMEN
This work describes a new route for patterning organic monolayers on oxide-free silicon by microcontact printing (microCP) on a preformed, reactive, acid-fluoride-terminated monolayer. This indirect printing approach is fast and easily preserves the oxide-free and well-defined monolayer-silicon interface, which is the most important property for potential applications in biosensing and molecular electronics. Water-contact-angle measurements, ellipsometry, attenuated total reflection infrared spectroscopy, and X-ray photoelectron spectroscopy (XPS) demonstrate the formation of the initial acid-fluoride-terminated monolayers without upside-down attachment. Subsequent printing for twenty seconds with an N-hexadecylamine-inked poly(dimethylsiloxane) stamp results in well-defined 5-microm N-hexadecylamide dots, as evidenced by atomic force microscopy and scanning electron microscopy. Printing with a flat stamp allows investigation of the efficiency of amide formation by microCP and water-contact-angle measurements, ellipsometry, and XPS reveal the quantitative conversion of the acid fluoride groups to the corresponding amide within twenty seconds. The absence of silicon oxide, even after immersion in water for 16 h, demonstrates that the oxide-free monolayer-silicon interface is easily preserved by this patterning route. Finally, it is shown by fluorescence microscopy that complex biomolecules, like functionalized oligo-DNA, can also be immobilized on the oxide-free silicon surface via microCP.
Asunto(s)
Fluoruros/química , Óxidos/química , Silicio/química , Aminas/química , ADN/química , Hidrocarburos , Microscopía de Fuerza Atómica , Microscopía Fluorescente , Espectroscopía de Fotoelectrones , Espectrofotometría Infrarroja , Propiedades de SuperficieRESUMEN
On H-Si(111), monolayer assembly with 1-alkenes results in alkyl monolayers with a Si-C-C linkage to the silicon substrate, while 1-alkynes yield alkenyl monolayers with a Si-C=C linkage. To investigate the influence of the different linkage groups on the final monolayer structure, organic monolayers were prepared from 1-alkenes and 1-alkynes with chain lengths from C(12) to C(18), and the final monolayer structures were studied in detail by static water contact angles measurements, ellipsometry, attenuated total reflectance infrared (ATR-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The thicknesses, tilt angles, and packing densities of the alkyl monolayers are in good agreement with literature values, whereas increased thicknesses, reduced tilt angles, and improved packing densities were observed for the alkenyl monolayers. Finally, the surface coverages for alkyl monolayers were determined to be 50-55% (in line with literature values), while those for the alkenyl monolayers increased with the chain length from 55% for C(12) to as high as 65% for C(18)! The latter value is very close to the theoretical maximum of 69% obtainable on H-Si(111). Such enhanced monolayer quality and increased surface coverage of the alkenyl monolayers, in combination with the oxidation-inhibiting nature of the Si-C=C linkage, significantly increases the chance of successful implementation of organic monolayers on oxide-free silicon in molecular electronic and biosensor devices, especially in view of the importance of a defect-free monolayer structure and the corresponding stability of the monolayer-silicon interface.
RESUMEN
A new method is presented for the fast and reproducible functionalization of silicon and silicon nitride surfaces coated with covalently attached alkyl monolayers. After formation of a methyl-terminated 1-hexadecyl monolayer on H-terminated Si(100) and Si(111) surfaces, short plasma treatments (1-3 s) are sufficient to create oxidized functionalities without damaging the underlying oxide-free silicon. The new functional groups can, e.g., be derivatized using the reaction of surface aldehyde groups with primary amines to form imine bonds. In this way, plasma-treated monolayers on silicon or silicon nitride surfaces were successfully coated with nanoparticles, or proteins such as avidin. In addition, we demonstrate the possibility of micropatterning, using a soft contact mask during the plasma treatment. Using water contact angle measurements, ellipsometry, XPS, IRRAS, AFM, and reflectometry, proof of principle is demonstrated of a yet unexplored way to form patterned alkyl monolayers on oxide-free silicon surfaces.