Recovery and fine structure variability of RGII sub-domains in wine (Vitis vinifera Merlot).

BACKGROUND AND AIMS: Rhamnogalacturonan II (RGII) is a structurally complex pectic sub-domain composed of more than 12 different sugars and 20 different linkages distributed in five side chains along a homogalacturonan backbone. Although RGII has long been described as highly conserved over plant evolution, recent studies have revealed variations in the structure of the polysaccharide. This study examines the fine structure variability of RGII in wine, focusing on the side chains A and B obtained after sequential mild acid hydrolysis. Specifically, this study aims to differentiate intrinsic structural variations in these RGII side chains from structural variations due to acid hydrolysis. METHODS: RGII from wine (Vitis vinifera Merlot) was sequentially hydrolysed with trifluoroacetic acid (TFA) and the hydrolysis products were separated by anion-exchange chromatography (AEC). AEC fractions or total hydrolysates were analysed by MALDI-TOF mass spectrometry. KEY RESULTS: The optimal conditions to recover non-degraded side chain B, side chain A and RGII backbone were 0·1 m TFA at 40 °C for 16 h, 0·48 m TFA at 40 °C for 16 h (or 0·1 m TFA at 60 °C for 8 h) and 0·1 m TFA at 60 °C for 16 h, respectively. Side chain B was particularly prone to acid degradation. Side chain A and the RGII GalA backbone were partly degraded by 0·1 m TFA at 80 °C for 1-4 h. AEC allowed separation of side chain B, methyl-esterified side chain A and non-methyl-esterified side chain A. The structure of side chain A and the GalA backbone were highly variable. CONCLUSIONS: Several modifications to the RGII structure of wine were identified. The observed dearabinosylation and deacetylation were primarily the consequence of acidic treatment, while variation in methyl-esterification, methyl-ether linkages and oxidation reflect natural diversity. The physiological significance of this variability, however, remains to be determined.

The major component of the cellulosomes of anaerobic fungi from the genus Piromyces is a family 48 glycoside hydrolase.

Sequencing of two cDNAs from the anaerobic fungi Piromyces equi and Piromyces sp. strain E2 revealed that they both encode a glycoside hydrolase (GH) family 48 cellulase, containing two C-terminal fungal dockerin domains. N-terminal sequencing of the major component of the Piromyces multi-enzyme cellulase/hemicellulase complex, termed the cellulosome, showed that these 80 kDa proteins corresponded to the GH family 48 enzyme. These data show for the first time that GH family 48 cellulases are not confined to bacteria, and that bacterial and fungal cellulosomes share the same pivotal component.

The location of the ligand-binding site of carbohydrate-binding modules that have evolved from a common sequence is not conserved.

Polysaccharide-degrading enzymes are generally modular proteins that contain non-catalytic carbohydrate-binding modules (CBMs), which potentiate the activity of the catalytic module. CBMs have been grouped into sequence-based families, and three-dimensional structural data are available for half of these families. Clostridium thermocellum xylanase 11A is a modular enzyme that contains a CBM from family 6 (CBM6), for which no structural data are available. We have determined the crystal structure of this module to a resolution of 2.1 A. The protein is a beta-sandwich that contains two potential ligand-binding clefts designated cleft A and B. The CBM interacts primarily with xylan, and NMR spectroscopy coupled with site-directed mutagenesis identified cleft A, containing Trp-92, Tyr-34, and Asn-120, as the ligand-binding site. The overall fold of CBM6 is similar to proteins in CBM families 4 and 22, although surprisingly the ligand-binding site in CBM4 and CBM22 is equivalent to cleft B in CBM6. These structural data define a superfamily of CBMs, comprising CBM4, CBM6, and CBM22, and demonstrate that, although CBMs have evolved from a relatively small number of ancestors, the structural elements involved in ligand recognition have been assembled at different locations on the ancestral scaffold.

Structure of a family 15 carbohydrate-binding module in complex with xylopentaose. Evidence that xylan binds in an approximate 3-fold helical conformation.

The recycling of photosynthetically fixed carbon by the action of microbial glycoside hydrolases is a key biological process. The consortium of degradative enzymes involved in this process frequently display catalytic modules appended to one or more noncatalytic carbohydrate-binding modules (CBMs). CBMs play a central role in the optimization of the catalytic activity of plant cell wall hydrolases through their binding to specific plant structural polysaccharides. Despite their pivotal role in the biodegradation of plant biomass, the mechanism by which these proteins recognize their target ligands is unclear. This report describes the structure of a xylan-binding CBM (CBM15) in complex with its ligand. This module, derived from Pseudomonas cellulosa xylanase Xyn10C, binds to both soluble xylan and xylooligosaccharides. The three-dimensional crystal structure of CBM15 bound to xylopentaose has been solved by x-ray crystallography to a resolution of 1.6 A. The protein displays a similar beta-jelly roll fold to that observed in many other families of binding-modules. A groove, 20-25 A in length, on the concave surface of one of the beta-sheets presents two tryptophan residues, the faces of which are orientated at approximately 240 degrees to one another. These form-stacking interactions with the n and n+2 sugars of xylopentaose complementing the approximate 3-fold helical structure of this ligand in the binding cleft of CBM15. In four of the five observed binding subsites, the 2' and 3' hydroxyls of the bound ligand are solvent-exposed, providing an explanation for the capacity of this xylan-binding CBM to accommodate the highly decorated xylans found in the plant cell wall.

Pseudomonas cellulosa expresses a single membrane-bound glycoside hydrolase family 51 arabinofuranosidase.

In the accompanying paper [Beylot, McKie, Voragen, Doeswijk-Voragen and Gilbert (2001) Biochem. J. 358, 607-614] the chromosome of Pseudomonas cellulosa was shown to contain two genes, abf51A and abf62A, that encode arabinofuranosidases belonging to glycoside hydrolase families 51 and 62, respectively. In this report we show that expression of Abf51A is induced by arabinose and arabinose-containing polysaccharides. Northern-blot analysis showed that abf51A was efficiently transcribed, whereas no transcript derived from abf62A was detected in the presence of arabinose-containing polysaccharides. Zymogram and Western-blot analyses revealed that Abf51A was located on the outer membrane of P. cellulosa. To investigate the importance of Abf51A in the release of arabinose from poly- and oligosaccharides, transposon mutagenesis was used to construct an abf51A-inactive mutant of P. cellulosa (Deltaabf51A). The mutant did not grow on linear arabinan or sugar beet arabinan, and utilized arabinoxylan much more slowly than the wild-type bacterium. Arabinofuranosidase activity in Deltaabf51A against aryl-alpha-arabinofuranosides, arabinan and alpha1,5-linked arabino-oligosaccharides was approx. 1% of the wild-type bacterium. The mutant bacterium did not exhibit arabinofuranosidase activity against arabinoxylan, supporting the view that abf62A is not expressed in P. cellulosa. These data indicate that P. cellulosa expresses a membrane-bound glycoside hydrolase family 51 arabinofuranosidase that plays a pivotal role in releasing arabinose from polysaccharides and arabino-oligosaccharides.

The Pseudomonas cellulosa glycoside hydrolase family 51 arabinofuranosidase exhibits wide substrate specificity.

To investigate the mechanism by which Pseudomonas cellulosa releases arabinose from polysaccharides and oligosaccharides, a gene library of P. cellulosa genomic DNA was screened for 4-methylumbelliferyl-alpha-L-arabinofuranosidase (MUAase) activity. A single MUAase gene (abf51A) was isolated, which encoded a non-modular glycoside hydrolase family (GH) 51 arabinofuranosidase (Abf51A) of 57000 Da. The substrate specificity of the Abf51A showed that it preferentially removed alpha1,2- and alpha1,3-linked arabinofuranose side chains from either arabinan or arabinoxylan, and hydrolysed alpha1,5-linked arabino-oligosaccharides, although at a much lower rate. The activity of Abf51A against arabinoxylan was similar to a GH62 arabinofuranosidase encoded by a P. cellulosa gene. Glu-194 and Glu-321 of Abf51A are conserved in GH51 enzymes, and it has been suggested that these amino acids comprise the key catalytic acid/base and nucleophile residues, respectively. To evaluate this hypothesis the biochemical properties of E194A and E321A mutants of Abf51A were evaluated. The data were consistent with the view that Glu-194 and Glu-321 comprise the key catalytic residues of Abf51A. These data, in conjunction with the results presented in the accompanying paper [Beylot, Emami, McKie, Gilbert and Pell (2001) Biochem. J. 358, 599-605], indicate that P. cellulosa expresses a membrane-bound GH51 arabinofuranosidase that plays a pivotal role in releasing arabinose from a range of polysaccharides and oligosaccharides.

A novel carbohydrate-binding protein is a component of the plant cell wall-degrading complex of Piromyces equi.

The recycling of photosynthetically fixed carbon by the action of microbial plant cell wall hydrolases is a fundamental biological process that is integral to one of the major geochemical cycles and, in addition, has considerable industrial potential. Enzyme systems that attack the plant cell wall contain noncatalytic carbohydrate-binding modules (CBMs) that mediate attachment to this composite structure and play a pivotal role in maximizing the hydrolytic process. Anaerobic fungi that colonize herbivores are the most efficient plant cell wall degraders known, and this activity is vested in a high molecular weight complex that binds tightly to the plant cell wall. To investigate whether plant cell wall attachment is mediated by noncatalytic proteins, a cDNA library of the anaerobic fungus Piromyces equi was screened for sequences that encode noncatalytic proteins that are components of the cellulase-hemicellulase complex. A 1.6-kilobase cDNA was isolated encoding a protein of 479 amino acids with a M(r) of 52548 designated NCP1. The mature protein had a modular architecture comprising three copies of the noncatalytic dockerin module that targets anaerobic fungal proteins to the cellulase-hemicellulase complex. The two C-terminal modules of NCP1, CBM29-1 and CBM29-2, respectively, exhibit 33% sequence identity with each other but have no homologues in protein data bases. A truncated form of NCP1 comprising CBM29-1 and CBM29-2 (CBM29-1-2) and each of the two individual copies of CBM29 bind primarily to mannan, cellulose, and glucomannan, displaying the highest affinity for the latter polysaccharide. CBM29-1-2 exhibits 4-45-fold higher affinity than either CBM29-1 or CBM29-2 for the various ligands, indicating that the two modules, when covalently linked, act in synergy to bind to an array of different polysaccharides. This paper provides the first report of a CBM-containing protein from an anaerobic fungal cellulase-hemicellulase complex. The two CBMs constitute a novel CBM family designated CBM29 whose members exhibit unusually wide ligand specificity. We propose, therefore, that NCP1 plays a role in sequestering the fungal enzyme complex onto the plant cell wall.

Characterization of a cellulosome dockerin domain from the anaerobic fungus Piromyces equi.

The recycling of photosynthetically fixed carbon in plant cell walls is a key microbial process. In anaerobes, the degradation is carried out by a high molecular weight multifunctional complex termed the cellulosome. This consists of a number of independent enzyme components, each of which contains a conserved dockerin domain, which functions to bind the enzyme to a cohesin domain within the protein scaffoldin protein. Here we describe the first three-dimensional structure of a fungal dockerin, the N-terminal dockerin of Cel45A from the anaerobic fungus Piromyces equi. The structure contains a novel fold of 42 residues. The ligand binding site consists of residues Trp 35, Tyr 8 and Asp 23, which are conserved in all fungal dockerins. The binding site is on the opposite side of the N- and C-termini of the molecule, implying that tandem dockerin domains, seen in the majority of anaerobic fungal plant cell wall degrading enzymes, could present multiple simultaneous binding sites and, therefore, permit tailoring of binding to catalytic demands.

Clostridium thermocellum Xyn10B carbohydrate-binding module 22-2: the role of conserved amino acids in ligand binding.

The majority of plant cell wall hydrolases are modular enzymes which, in addition to a catalytic module, possess one or more carbohydrate-binding modules (CBMs). These carbohydrate-active enzymes and their constituent modules have been classified into a number of families based upon amino acid sequence similarity. The Clostridium thermocellum xylanase, Xyn10B, contains two CBMs that belong to family 22 (CBM22). The crystal structure of the C-terminal CBM22 (CBM22-2) was determined in a previous study [Charnock, S. J., et al. (2000) Biochemistry 39, 5013--5021] and revealed a surface cleft which presents several conserved residues that are implicated in ligand binding. These amino acids have been substituted and the structure and biochemical properties of the mutants analyzed. The data show that R25A, W53A, Y103A, Y136A, and E138A exhibit greatly reduced affinity for xylotetraose relative to that of the wild-type protein. Conversely, mutations Y103F and Y136F have little effect on ligand binding. Using thermodynamic, X-ray, and NMR measurements on the mutants, we show that the cleft of CBM22-2 does indeed form the ligand-binding site. Trp 53 and Tyr 103 most likely participate in hydrophobic stacking interactions with the ligand, while Glu 138 makes one or more important hydrogen bonds with the tetrasaccharide. Although Arg 25 and Tyr 136 are likely to form hydrogen bonds with the ligand, they are also shown to play a critical role in maintaining the structural integrity of the binding cleft.

Influence of the aglycone region of the substrate binding cleft of Pseudomonas xylanase 10A on catalysis.

Pseudomonas cellulosa xylanase 10A (Pc Xyn10A) contains an extended substrate binding cleft comprising three glycone (-1 to -3) and four aglycone (+1 to +4) subsites and, typical of retaining glycoside hydrolases, exhibits transglycosylation activity at elevated substrate concentrations. In a previous study [Charnock, S. J., et al. (1997) J. Biol. Chem. 272, 2942-2951], it was demonstrated that the -2 subsite mutations E43A and N44A caused a 100-fold reduction in activity against xylooligosaccharides, but did not influence xylanase activity. This led to the proposal that the low activity of these mutants against xylooligosaccharides was due to nonproductive complex formation between these small substrates and the extended aglycone region of the active site. To test this hypothesis, key residues at the +2 (Asn182), +3 (Tyr255), and +4 (Tyr220) subsites were substituted for alanine, and the activity of the mutants against polysaccharides and oligosaccharides was evaluated. All the aglycone mutants exhibited greatly reduced or no transglycosylating activity, and the triple mutants, E43A/Y220A/Y255A and E43A/N182A/Y255A, had activity against xylotriose similar to that of E43A. The aglycone mutations caused an increase in both k(cat) and K(m) against xylan, with N182A/Y220A/Y255A and N182A/Y255A exhibiting 25- and 15-fold higher k(cat) values, respectively, than wild-type Pc Xyn10A. These data indicate that Glu43 plays a role in binding xylooligosaccharides, but not xylan, suggesting that the mechanisms by which Pc Xyn10A binds polysaccharides and oligosaccharides are distinct. The increased k(cat) of the mutants against xylan indicates that the aglycone region of wild-type Pc Xyn10A restricts the rate of catalysis by limiting diffusion of the cleaved substrate, generated at the completion of the k(2) step, out of the active site.

Evidence for synergy between family 2b carbohydrate binding modules in Cellulomonas fimi xylanase 11A.

Glycoside hydrolases often contain multiple copies of noncatalytic carbohydrate binding modules (CBMs) from the same or different families. Currently, the functional importance of this complex molecular architecture is unclear. To investigate the role of multiple CBMs in plant cell wall hydrolases, we have determined the polysaccharide binding properties of wild type and various derivatives of Cellulomonas fimi xylanase 11A (Cf Xyn11A). This protein, which binds to both cellulose and xylan, contains two family 2b CBMs that exhibit 70% sequence identity, one internal (CBM2b-1), which has previously been shown to bind specifically to xylan and the other at the C-terminus (CBM2b-2). Biochemical characterization of CBM2b-2 showed that the module bound to insoluble and soluble oat spelt xylan and xylohexaose with K(a) values of 5.6 x 10(4), 1.2 x 10(4), and 4.8 x 10(3) M(-1), respectively, but exhibited extremely weak affinity for cellohexaose (<10(2) M(-1)), and its interaction with insoluble cellulose was too weak to quantify. The CBM did not interact with soluble forms of other plant cell wall polysaccharides. The three-dimensional structure of CBM2b-2 was determined by NMR spectroscopy. The module has a twisted "beta-sandwich" architecture, and the two surface exposed tryptophans, Trp 570 and Trp 602, which are in a perpendicular orientation with each other, were shown to be essential for ligand binding. In addition, changing Arg 573 to glycine altered the polysaccharide binding specificity of the module from xylan to cellulose. These data demonstrate that the biochemical properties and tertiary structure of CBM2b-2 and CBM2b-1 are extremely similar. When CBM2b-1 and CBM2b-2 were incorporated into a single polypeptide chain, either in the full-length enzyme or an artificial construct comprising both CBM2bs covalently joined via a flexible linker, there was an approximate 18-20-fold increase in the affinity of the protein for soluble and insoluble xylan, as compared to the individual modules, and a measurable interaction with insoluble acid-swollen cellulose, although the K(a) (approximately 6.0 x 10(4) M(-1)) was still much lower than for insoluble xylan (K(a) = approximately 1.0 x 10(6) M(-1)). These data demonstrate that the two family 2b CBMs of Cf Xyn11A act in synergy to bind acid swollen cellulose and xylan. We propose that the increased affinity of glycoside hydrolases for polysaccharides, through the synergistic interactions of CBMs, provides an explanation for the duplication of CBMs from the same family in some prokaryotic cellulases and xylanases.

Role of hydrogen bonding in the interaction between a xylan binding module and xylan.

NMR studies of the internal family 2b carbohydrate binding module (CBM2b-1) of Cellulomonas fimi xylanase 11A have identified six polar residues and two aromatic residues that interact with its target ligand, xylan. To investigate the importance of the various interactions, free energy and enthalpy changes have been measured for the binding of xylan to native and mutant forms of CBM2b-1. The data show that the two aromatic residues, Trp 259 and Trp 291, play a critical role in the binding, and similarly that mutants N264A and T316A have no affinity for the xylose polymer. Interestingly, mutations E257A, Q288A, N292A, E257A/Q288A, E257A/N292A, and E257A/N292A/Q288A do not significantly diminish the affinity of CBM2b-1 for the xylose polymers, but do influence the thermodynamics driving the protein-carbohydrate interactions. These thermodynamic parameters have been interpreted in light of a fresh understanding of enthalpy-entropy compensation and show the following. (1) For proteins whose ligands are bound on an exposed surface, hydrogen bonding confers little specificity or affinity. It also displays little cooperativity. Most specificity and affinity derive from binding between the face of sugar rings and aromatic rings. (2) Loss of hydrogen bonding interactions leads to a redistribution of the remaining bonding interactions such that the entropic mobility of the ligand is maximized, at the expense (if necessary) of enthalpically favorable bonds. (3) Changes in entropy and enthalpy in the binding between polysaccharide and a range of mutants can be interpreted by considering changes in binding and flexibility, without any need to consider solvent reorganization.

Crystal structure of mannanase 26A from Pseudomonas cellulosa and analysis of residues involved in substrate binding.

The crystal structure of Pseudomonas cellulosa mannanase 26A has been solved by multiple isomorphous replacement and refined at 1.85 A resolution to an R-factor of 0.182 (R-free = 0.211). The enzyme comprises (beta/alpha)(8)-barrel architecture with two catalytic glutamates at the ends of beta-strands 4 and 7 in precisely the same location as the corresponding glutamates in other 4/7-superfamily glycoside hydrolase enzymes (clan GH-A glycoside hydrolases). The family 26 glycoside hydrolases are therefore members of clan GH-A. Functional analyses of mannanase 26A, informed by the crystal structure of the enzyme, provided important insights into the role of residues close to the catalytic glutamates. These data showed that Trp-360 played a critical role in binding substrate at the -1 subsite, whereas Tyr-285 was important to the function of the nucleophile catalyst. His-211 in mannanase 26A does not have the same function as the equivalent asparagine in the other GH-A enzymes. The data also suggest that Trp-217 and Trp-162 are important for the activity of mannanase 26A against mannooligosaccharides but are less important for activity against polysaccharides.

A new family of rhamnogalacturonan lyases contains an enzyme that binds to cellulose.

Pseudomonas cellulosa is an aerobic bacterium that synthesizes an extensive array of modular cellulases and hemicellulases, which have a modular architecture consisting of catalytic domains and distinct non-catalytic carbohydrate-binding modules (CBMs). To investigate whether the main-chain-cleaving pectinases from this bacterium also have a modular structure, a library of P. cellulosa genomic DNA, constructed in lambdaZAPII, was screened for pectinase-encoding sequences. A recombinant phage that attacked arabinan, galactan and rhamnogalacturonan was isolated. The encoded enzyme, designated Rgl11A, had a modular structure comprising an N-terminal domain that exhibited homology to Bacillus and Streptomyces proteins of unknown function, a middle domain that exhibited sequence identity to fibronectin-3 domains, and a C-terminal domain that was homologous to family 2a CBMs. Expression of the three modules of the Pseudomonas protein in Escherichia coli showed that its C-terminal module was a functional cellulose-binding domain, and the N-terminal module consisted of a catalytic domain that hydrolysed rhamnogalacturonan-containing substrates. The activity of Rgl11A against apple- and potato-derived rhamnogalacturonan substrates indicated that the enzyme had a strong preference for rhamnogalacturonans that contained galactose side chains, and which were not esterified. The enzyme had an absolute requirement for calcium, a high optimum pH, and catalysis was associated with an increase in absorbance at 235 nm, indicating that glycosidic bond cleavage was mediated via a beta-elimination mechanism. These data indicate that Rgl11A is a rhamnogalacturonan lyase and, together with the homologous Bacillus and Streptomyces proteins, comprise a new family of polysaccharide lyases. The presence of a family 2a CBM in Rgl11A, and in a P. cellulosa pectate lyase described in the accompanying paper [Brown, Mallen, Charnock, Davies and Black (2001) Biochem. J. 355, 155-165] suggests that the capacity to bind cellulose plays an important role in the activity of main-chain-cleaving Pseudomonas pectinases, in addition to cellulases and hemicellulases.

alpha-Galactosidase A from Pseudomonas fluorescens subsp. cellulosa: cloning, high level expression and its role in galactomannan hydrolysis.

A library of Pseudomonas fluorescens subsp. cellulosa genomic DNA, constructed in lambda ZAPII, was screened for alpha-D-galactosidase activity. The DNA inserts from six galactosidase-positive clones were rescued into plasmids. Restriction digestion and Southern analysis revealed that each of the plasmids contained a common DNA sequence. The sequence of the Pseudomonas DNA in one of the plasmids revealed a single open reading frame (aga27A) of 1215 bp encoding a protein of M(r) 45900, designated alpha-galactosidase 27A (Aga27A). Aga27A exhibited extensive sequence identity with alpha-galactosidases in glycoside hydrolase 27, and appeared to be a single domain protein. The recombinant alpha-galactosidase was expressed at high levels in Escherichia coli and the biophysical properties and substrate specificity of the enzyme were evaluated. The data showed that Aga27A was a mesophilic neutral acting non-specific alpha-galactosidase. Both P. fluorescens subsp. cellulosa mannanase A (ManA) and Aga27A hydrolyse the polymeric substrate, carob galactomannan. Sequential hydrolysis with AgaA followed by ManA, or ManA followed by AgaA enhanced product release. The positive effects of sequential hydrolysis are discussed.

The structural basis for the ligand specificity of family 2 carbohydrate-binding modules.

The interactions of proteins with polysaccharides play a key role in the microbial hydrolysis of cellulose and xylan, the most abundant organic molecules in the biosphere, and are thus pivotal to the recycling of photosynthetically fixed carbon. Enzymes that attack these recalcitrant polymers have a modular structure comprising catalytic modules and non-catalytic carbohydrate-binding modules (CBMs). The largest prokaryotic CBM family, CBM2, contains members that bind cellulose (CBM2a) and xylan (CBM2b), respectively. A possible explanation for the different ligand specificity of CBM2b is that one of the surface tryptophans involved in the protein-carbohydrate interaction is rotated by 90 degrees compared with its position in CBM2a (thus matching the structure of the binding site to the helical secondary structure of xylan), which may be promoted by a single amino acid difference between the two families. Here we show that by mutation of this single residue (Arg-262-->Gly), a CBM2b xylan-binding module completely loses its affinity for xylan and becomes a cellulose-binding module. The structural effect of the mutation has been revealed using NMR spectroscopy, which confirms that Trp-259 rotates 90 degrees to lie flat against the protein surface. Except for this one residue, the mutation only results in minor changes to the structure. The mutated protein interacts with cellulose using the same residues that the wild-type CBM2b uses to interact with xylan, suggesting that the recognition is of the secondary structure of the polysaccharide rather than any specific recognition of the absence or presence of functional groups.

A novel Cellvibrio mixtus family 10 xylanase that is both intracellular and expressed under non-inducing conditions.

Hydrolysis of the plant cell wall polysaccharides cellulose and xylan requires the synergistic interaction of a repertoire of extracellular enzymes. Recently, evidence has emerged that anaerobic bacteria can synthesize high levels of periplasmic xylanases which may be involved in the hydrolysis of small xylo-oligosaccharides absorbed by the micro-organism. Cellvibrio mixtus, a saprophytic aerobic soil bacterium that is highly active against plant cell wall polysaccharides, was shown to express internal xylanase activity when cultured on media containing xylan or glucose as sole carbon source. A genomic library of C. mixtus DNA, constructed in lambdaZAPII, was screened for xylanase activity. The nucleotide sequence of the genomic insert from a xylanase-positive clone that expressed intracellular xylanase activity in Escherichia coli revealed an ORF of 1137 bp (xynC), encoding a polypeptide with a deduced M(r) of 43413, defined as xylanase C (XylC). Probing a gene library of Pseudomonas fluorescens subsp. cellulosa with C. mixtus xynC identified a xynC homologue (designated xynG) encoding XylG; XylG and xynG were 67% and 63% identical to the corresponding C. mixtus sequences, respectively. Both XylC and XylG exhibit extensive sequence identity with family 10 xylanases, particularly with non-modular enzymes, and gene deletion studies on xynC supported the suggestion that they are single-domain xylanases. Purified recombinant XylC had an M(r) of 41000, and displayed biochemical properties typical of family 10 polysaccharidases. However, unlike previously characterized xylanases, XylC was particularly sensitive to proteolytic inactivation by pancreatic proteinases and was thermolabile. C. mixtus was grown to late-exponential phase in the presence of glucose or xylan and the cytoplasmic, periplasmic and cell envelope fractions were probed with anti-XylC antibodies. The results showed that XylC was absent from the culture media but was predominantly present in the periplasm of C. mixtus cells grown on glucose, xylan, CM-cellulose or Avicel. These data suggest that C. mixtus can express non-modular internal xylanases whose potential roles in the hydrolysis of plant cell wall components are discussed.

A comparison of enzyme-aided bleaching of softwood paper pulp using combinations of xylanase, mannanase and alpha-galactosidase.

Enzymatic pretreatment of softwood kraft pulp was investigated using xylanase A (XylA) from Neocallimastix patriciarum in combination with mannanase and alpha-galactosidase. Mannanase A (ManA) from Pseudomonas fluorescens subsp. cellulosa and ManA from Clostridium thermocellum, both family 26 glycosyl hydrolases, are structurally diverse and exhibit different pH and temperature optima. Although neither mannanase was effective in pretreating softwood pulp alone, both enzymes were able to enhance the production of reducing sugar and the reduction of single-stage bleached kappa number when used with the xylanase. Sequential incubations with XylA and P. fluorescens ManA produced the largest final kappa number reduction in comparison to control pretreated pulp. The release of galactose from softwood pulp by alpha-galactosidase A (AgaA) from P. fluorescens was enhanced by the presence of ManA from the same microorganism, and a single pretreatment with these enzymes, in combination with XylA. gave the most effective kappa number reduction using a single incubation. Results indicated that mixtures of hemicellulase activities can be chosen to enhance pulp bleachability.

The X6 "thermostabilizing" domains of xylanases are carbohydrate-binding modules: structure and biochemistry of the Clostridium thermocellum X6b domain.

Many polysaccharide-degrading enzymes display a modular structure in which a catalytic module is attached to one or more noncatalytic modules. Several xylanases contain a module of previously unknown function (termed "X6" modules) that had been implicated in thermostability. We have investigated the properties of two such "thermostabilizing" modules, X6a and X6b from the Clostridium thermocellumxylanase Xyn10B. These modules, expressed either as discrete entities or as their natural fusions with the catalytic module, were assayed, and their capacity to bind various carbohydrates and potentiate hydrolytic activity was determined. The data showed that X6b, but not X6a, increased the activity of the enzyme against insoluble xylan and bound specifically to xylooligosaccharides and various xylans. In contrast, X6a exhibited no affinity for soluble or insoluble forms of xylan. Isothermal titration calorimetry revealed that the ligand-binding site of X6b accommodates approximately four xylose residues. The protein exhibited K(d) values in the low micromolar range for xylotetraose, xylopentaose, and xylohexaose; 24 microM for xylotriose; and 50 microM for xylobiose. Negative DeltaH and DeltaS values indicate that the interaction of X6b with xylooligosaccharides and xylan is driven by enthalpic forces. The three-dimensional structure of X6b has been solved by X-ray crystallography to a resolution of 2.1 A. The protein is a beta-sandwich that presents a tryptophan and two tyrosine residues on the walls of a shallow cleft that is likely to be the xylan-binding site. In view of the structural and carbohydrate-binding properties of X6b, it is proposed that this and related modules be re-assigned as family 22 carbohydrate-binding modules.

Substrate specificity in glycoside hydrolase family 10. Tyrosine 87 and leucine 314 play a pivotal role in discriminating between glucose and xylose binding in the proximal active site of Pseudomonas cellulosa xylanase 10A.

The Pseudomonas family 10 xylanase, Xyl10A, hydrolyzes beta1, 4-linked xylans but exhibits very low activity against aryl-beta-cellobiosides. The family 10 enzyme, Cex, from Cellulomonas fimi, hydrolyzes aryl-beta-cellobiosides more efficiently than does Xyl10A, and the movements of two residues in the -1 and -2 subsites are implicated in this relaxed substrate specificity (Notenboom, V., Birsan, C., Warren, R. A. J., Withers, S. G., and Rose, D. R. (1998) Biochemistry 37, 4751-4758). The three-dimensional structure of Xyl10A suggests that Tyr-87 reduces the affinity of the enzyme for glucose-derived substrates by steric hindrance with the C6-OH in the -2 subsite of the enzyme. Furthermore, Leu-314 impedes the movement of Trp-313 that is necessary to accommodate glucose-derived substrates in the -1 subsite. We have evaluated the catalytic activities of the mutants Y87A, Y87F, L314A, L314A/Y87F, and W313A of Xyl10A. Mutations to Tyr-87 increased and decreased the catalytic efficiency against 4-nitrophenyl-beta-cellobioside and 4-nitrophenyl-beta-xylobioside, respectively. The L314A mutation caused a 200-fold decrease in 4-nitrophenyl-beta-xylobioside activity but did not significantly reduce 4-nitrophenyl-beta-cellobioside hydrolysis. The mutation L314A/Y87A gave a 6500-fold improvement in the hydrolysis of glucose-derived substrates compared with xylose-derived equivalents. These data show that substantial improvements in the ability of Xyl10A to accommodate the C6-OH of glucose-derived substrates are achieved when steric hindrance is removed.