Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
1.
Phys Rev E ; 99(2-1): 023108, 2019 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-30934347

RESUMEN

We report on experiments and modeling on a rotating confined liquid that is forced by circumferential jets coaxial with the rotation axis, wherein system-scale secondary flows are observed to emerge. The jets are evenly divided in number between inlets and outlets and have zero net mass transport. For low forcing strengths the sign of this flow depends on the sign of a sloped end cap, which simulates a planetary ß plane. For increased forcing strengths the secondary flow direction is insensitive to the slope sign, and instead appears to be dominated by an asymmetry in the forcing mechanism, namely, the difference in radial divergence between the inlet and outlet jet profiles. This asymmetry yields a net radial velocity that is affected by the Coriolis force, inducing secondary zonal flow.

2.
Rev Sci Instrum ; 89(10): 10K121, 2018 Oct.
Artículo en Inglés | MEDLINE | ID: mdl-30399718

RESUMEN

We present a device for controlled injection of a variety of materials in powder form. The system implements four independent feeder units, arranged to share a single vertical drop tube. Each unit consists of a 80 ml reservoir, coupled to a horizontal linear trough, where a layer of powder is advanced by piezo-electric agitation at a speed proportional to the applied voltage, until it falls into a drop tube. The dropper has been tested with a number of impurities of low (B, BN, C), intermediate (Si, SiC), and high Z (Sn) and a variety of microscopic structures (flakes, spheres, rocks) and sizes (5-200 µm). For low Z materials, drop rates ∼2-200 mg/s have been obtained showing good repeatability and uniformity. A calibrated light-emitting diode (LED)-based flowmeter allows measuring and monitoring the drop rate during operation. The fast time-response of the four feeders allows combination of steady and pulsed injections, providing a flexible tool for controlled-dose, real-time impurity injection in fusion plasmas.

3.
Rev Sci Instrum ; 89(10): 103302, 2018 Oct.
Artículo en Inglés | MEDLINE | ID: mdl-30399880

RESUMEN

The interaction of ion beams with matter includes the investigation of the basic principles of ion stopping in heated materials. An unsolved question is the effect of different, especially higher, ion beam fluences on ion stopping in solid targets. This is relevant in applications such as in fusion sciences. To address this question, a Thomson parabola was built for the Neutralized Drift Compression eXperiment (NDCX-II) for ion energy-loss measurements at different ion beam fluences. The linear induction accelerator NDCX-II delivers 2 ns short, intense ion pulses, up to several tens of nC/pulse, or 1010-1011 ions, with a peak kinetic energy of ∼1.1 MeV and a minimal spot size of 2 mm FWHM. For this particular accelerator, the energy determination with conventional beam diagnostics, for example, time of flight measurements, is imprecise due to the non-trivial longitudinal phase space of the beam. In contrast, a Thomson parabola is well suited to reliably determine the beam energy distribution. The Thomson parabola differentiates charged particles by energy and charge-to-mass ratio, through deflection of charged particles by electric and magnetic fields. During first proof-of-principle experiments, we achieved to reproduce the average initial helium beam energy as predicted by computer simulations with a deviation of only 1.4%. Successful energy-loss measurements with 1 µm thick silicon nitride foils show the suitability of the accelerator for such experiments. The initial ion energy was determined during a primary measurement without a target, while a second measurement, incorporating the target, was used to determine the transmitted energy. The energy-loss was then determined as the difference between the two energies.

4.
Phys Rev Lett ; 95(23): 234801, 2005 Dec 02.
Artículo en Inglés | MEDLINE | ID: mdl-16384309

RESUMEN

Longitudinal compression of a velocity-tailored, intense neutralized beam at 300 keV, 25 mA has been demonstrated. The compression takes place in a 1-2 m drift section filled with plasma to provide space-charge neutralization. An induction cell produces a head-to-tail velocity ramp that longitudinally compresses the neutralized beam, enhancing the beam peak current by a factor of 50 and producing a pulse duration of about 3 ns. This measurement has been confirmed independently with two different diagnostic systems.

5.
Phys Rev Lett ; 90(1): 015001, 2003 Jan 10.
Artículo en Inglés | MEDLINE | ID: mdl-12570620

RESUMEN

Small transverse magnetic quadrupole fields sharply degrade the confinement of non-neutral plasmas held in Malmberg-Penning traps. For example, a quadrupole magnetic field of only 0.02 G/cm doubles the diffusion rate in a trap with a 100 G axial magnetic field. Larger quadrupole fields noticeably change the shape of the plasma. The transport is greatest at an orbital resonance. These results cast doubt on plans to use magnetic quadrupole neutral atom traps to confine antihydrogen atoms created in double-well positron/antiproton Malmberg-Penning traps.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...