WNT10A and RUNX2 mutations associated with non-syndromic tooth agenesis.

The goal of this study was to examine the prevalence of WNT10A and RUNX2 mutations and assess their potential impact on the phenotype of non-syndromic tooth agenesis. The study included 30 participants with non-syndromic tooth agenesis, divided into hypodontia (n = 24) and oligodontia forms (n = 6), and 42 unaffected family members. Genomic DNA from buccal epithelial cells was used for polymerase chain reaction amplification of functionally important exons of the WNT10A and RUNX2 genes. Direct sequencing reactions were performed to confirm the presence of mutations. The trend of increasing prevalence of WNT10A mutations and a slight increase in the prevalence of RUNX2 mutations were revealed in tooth agenesis cases compared to unaffected family members. There was a higher prevalence of hypodontia than oligodontia, increased frequency of females over males with missing teeth, and a wide phenotypic variability was observed in individuals and families analyzed. The common missense mutations (p.Phe228Ile, p.Arg113Cys, p.Asp217Asn, and p.Gly165Arg) and c.114-56T>C in the WNT10A gene and in-frame-deletion/insertions (11A, 24Q, 30Q), synonymous variant c.240G>A, and 424-33dupC in the RUNX2 gene were identified. These findings highlight an important role of WNT10A and RUNX2 mutations in the genetic etiology of non-syndromic tooth agenesis.

Single nucleotide polymorphisms MYO1H 1001 C>T SNP (rs3825393) is a strong risk factor for mandibular prognathism.

INTRODUCTION: Mandibular prognathism (MP) is a common craniofacial disorder of Class III malocclusion that causes esthetic and functional problems. Class III malocclusion diversity is influenced by both environmental and genetic factors. Single nucleotide polymorphisms (SNPs) in genes involved in craniofacial morphogenesis, bone and cartilage development, and metabolism, could play a role as predisposing factors. The present study aimed to establish a potential association between MATN1 -1878 A>G (rs1149048), MYO1H 1001 C>T (rs3825393), and BMP-4 538 A>G (rs17563) SNPs and MP in Serbian population. METHODS: The study included 110 participants: 55 patients with Class III malocclusion diagnosed with MP and 55 with Class I malocclusion. The 3 SNPs were analyzed using the polymerase chain reaction-restriction fragment length polymorphism method. RESULTS: The genotype frequency of MYO1H showed a highly significant difference between patients and controls. Heterozygous carriers of the T allele had an almost 3-fold increase in odds for the development of MP (odds ratio, 2.79; 95% confidence interval, 1.26-6.19; P = 0.010). No association could be established between MATN1 and BMP-4 polymorphisms and MP. CONCLUSIONS: Our results support the concept of gene polymorphisms as risk modulators in mandibular prognathism development, although only the association between MYO1H and MP was found in Serbian patients with Class III malocclusion.

Quality of Life Assessment in Patients with Malocclusion Undergoing Orthodontic and Orthognathic Treatment.

INTRODUCTION: The objective of this study was to assess pre-treatment quality of life and the relevant clinical variables in adult patients with malocclusion in order to improve orthodontic treatment strategies. METHODS: The study was conducted in 240 consecutive adult patients with malocclusions divided into two groups: patients for whom an orthodontic treatment plan was considered, and patients for whom an orthognathic treatment plan was selected. Patients were examined between December 2015 and February 2017, at the School of Dental Medicine, University of Belgrade. Malocclusion severity was recorded using the Peer Assessment Rating index pre-treatment score. Skeletal malocclusion parameters were measured using lateral cephalometric radiographs. Quality of life was assessed by means of a generic questionnaire (Medical Outcomes Study Short Form-36 (SF-36)), and the disease-specific Orthognathic Quality of Life Questionnaire (OQLQ). RESULTS: There were significant differences in the mean values of the OQLQ domain scores between orthodontic and orthognathic patients. Patients for whom orthodontic treatment was planned had statistically significantly lower scores in comparison to those for whom orthognathic treatment was planned. This was the case in all OQLQ domains except for "Awareness of facial deformity". Statistically significant correlations (p<0.05) were presented between OQLQ scores and following demographic and clinical variables: gender, age, malocclusion severity, maxillary and mandibular sagittal, maxillary vertical, and lower incisor positions, intermaxillary angle, and the Beck Depression Inventory and Beck Anxiety Inventory levels. The independent predictors for the planning of orthodontic and orthognathic treatment in patients with malocclusion were two OQLQ domains, "Facial aesthetics" and "Awareness of facial deformity", as well as total OQLQ score, after adjustment for demographic characteristics, skeletal parameters, anxiety and depression. CONCLUSIONS: Our findings suggest that patients for whom orthodontic treatment was planned demonstrated better quality of life according to the OQLQ scores in comparison to those for whom orthognathic therapy was planned.

Mandibular lateral deviation induces alteration in vascular endothelial growth factor expression and oxidative stress/nitric oxide generation in rat condyle, synovial membrane and masseter muscle.

OBJECTIVE: We aimed to investigate alteration in cellular signaling mediated by vascular endothelial growth factor (VEGF) and parameters of oxidative stress/nitric oxide generation, superoxide dismutase (SOD) and neuronal nitric oxide synthase (nNOS), underlying altered functional mechanical loading of TMJ (temporomandibular joint) during lateral mandibular deviation. DESIGN: Thirty-eight 5-week-old male Wistar rats were divided into experimental group, which received acrylic resin appliance that shifted mandible to the left during closure, and control group. Computed tomography and histomorphometry were used for condyle analyses, while samples of condyle, synovial membrane and m. masseter were analyzed with enzyme-linked immunosorbent assay and spectrophotometry to determine VEGF and nNOS protein concentrations, and SOD activity. RESULTS: Experimental group of rats developed smaller and asymmetrical mandibles. Less of new bone and cartilage formation and larger bone marrow cavities area were found in the experimental group. Higher VEGF expression in condyle and m. masseter as well as higher nNOS expression in m. masseter and synovial membrane were found in the experimental compared to the control group. Alteration of SOD activity was found in m. masseter and synovial membrane in the experimental group. CONCLUSIONS: Lateral mandibular deviation induces mandibular and condylar morphological changes as well as significant cellular signaling alterations in condyle, synovial membrane and masticatory muscle. Cellular VEGF protein overexpression and oxidative stress/nitric oxide disbalance could be the mechanisms underlying unbalanced functional TMJ loading due to mandibular deviation.

Malocclusion from the prehistoric to the medieval times in Serbian population: Dentoalveolar and skeletal relationship comparisons in samples.

The aims of this study were to reconstruct and analyze dental occlusion and skeletal jaw relationship in samples from Mesolithic-Neolithic, Bronze Age, Roman and Medieval times in Serbia, to compare results and to determine possible direction of the occlusal changes. Anatomically preserved skulls with mandibles and most of the posterior teeth were included in the investigation. Dental occlusion was reconstructed using the position of centric occlusion and centric relation and analyzed according to Angle's classification. Lateral cephalometric radiographs were traced manually. Site differences were tested by one-way ANOVA, while sex, age and site impacts were analyzed by UNIANOVA. Most of the individuals in all groups had Class I occlusion. Half-cusp distal occlusion was also present in all groups, but there were no significant differences between the groups. Cephalometric analysis showed no differences in the sagittal measurements, almost all individuals had skeletal Class I jaw relationship. Vertical traits analysis revealed markedly decreased basal plane angle and also decreased posterior facial height and sum of the posterior angles in the oldest group in comparison to the later groups. These results indicate that in the Serbian skeletal sample from the Mesolithic-Neolithic to the Medieval times, malocclusions were present in the form of dentoalveolar Class II occlusion. Skeletal deep bite was found in the oldest group, while horizontal growth pattern decreased from prehistoric to the Medieval times. Samples were too small to confirm environmental impact on the vertical skeletal discrepancies.

Long-term influence of fixed lingual retainers on the development of gingival recession: A retrospective, longitudinal cohort study.

OBJECTIVE: To investigate the long-term influence of fixed lingual retainers on the development of mandibular gingival recession and to compare the prevalence with untreated individuals. MATERIALS AND METHODS: The material consisted of 144 subjects: 96 orthodontically treated patients followed for 5 years after therapy and 48 untreated age-matched subjects. The treated patients were divided in two groups: one receiving a fixed mandibular retainer (n = 48) and one receiving no form of retention in the mandible (n = 48). The presence or absence of gingival recession and calculus accumulation were scored before treatment (T0), after debonding (T1), and 5 years after debonding (T5) for each tooth in the mandibular intercanine region using plaster models and intraoral photographs. The chi-square test, one-way ANOVA, and Cochran's Q test were used to evaluate inter- and intragroup differences. RESULTS: The prevalence of patients with recession increased gradually and significantly throughout the observation periods in all groups, but the intergroup differences at T5 were not significant. Significantly more calculus accumulation was observed at T5 in the retainer group compared with the group without retainers. CONCLUSIONS: Long-term presence of fixed lingual retainers does not seem to increase the development of mandibular gingival recession, but does increase calculus accumulation.

Dental occlusion analysis in the Mesolithic-Neolithic Age, Bronze Age, and Roman to Medieval times in Serbia: Tooth size comparison in skeletal samples.

OBJECTIVE: Anthropological studies have reported that tooth size decreases in the context of diet changes. Some investigations have found a reverse trend in tooth size from the prehistoric to the modern times. The aims of this study were to analyze tooth size in skeletal samples from Mesolithic-Neolithic Age, Bronze Age, and Roman to Medieval times to determine sex differences and establish a temporal trend in tooth size in the aforementioned periods. DESIGN: Well-preserved permanent teeth were included in the investigation. The mesiodistal (MD) diameter of all teeth and buccolingual (BL) diameter of the molars were measured. Effects of sex and site were tested by one-way ANOVA, and the combined effect of these factors was analyzed by UNIANOVA. RESULTS: Sexual dimorphism was present in the BL diameters of all molars and MD diameters of the upper first and the lower third molar. The lower canine was the most dimorphic tooth in the anterior region. The MD diameter of most teeth showed no significant difference between the groups, (sample from: Mesolithic-Neolithic Age-group 1; Bronze Age-group 2; Roman times-group 3; Medieval times-group 4), whereas the BL diameters of the upper second and the lower first molar were the largest in the first group. Multiple comparisons revealed a decrease in the BL diameter of the upper second and the lower first molar from the first to the later groups. Lower canine MD diameter exhibited an increase in the fourth group compared to the second group. CONCLUSION: On the basis of the MD diameter, a temporal trend could not be observed for most of the teeth. The lower canine exhibited an increase in the MD diameter from the prehistoric to the Medieval times. Changes of BL diameter were more homogeneous, suggesting that the temporal trend of molar size decreased from the Mesolithic-Neolithic to Medieval times in Serbia.

Cross-cultural adaptation and validation of the disease specific questionnaire OQLQ in Serbian patients with malocclusions.

INTRODUCTION: Dentofacial disorders may potentially significantly affect the quality of life. Objectives of this study were to validate translated and culturally adapted Orthognatic Quality of Life Questionnaire (OQLQ) on a cohort of Serbian patients with malocclusions. METHODS: The questionnaire was validated in 111 consecutive patients with malocclusions, seen between December 2014 and February 2015 at the Clinic of Orthodontics, Faculty of Dental Medicine, University of Belgrade. Clinical validity was assessed comparing the mean scores for the four subscales of the OQLQ and mean PAR pre-treatment score. In order to assess whether the allocation of items in the subscales corresponds to their distribution in the original questionnaire, an exploratory factor analysis (principal component analysis with varimax rotation) was conducted. RESULTS: The results of the internal consistency analysis demonstrated good relationships between the items; Cronbach's alpha coefficients for the four subscales were highly significant (p<0.001) (0.88-0.91). All items were significantly correlated between baseline and the retest (6 weeks after). The correlations between the PAR and all four domains of the OQLQ were all significant (p<0.01). The loading weights obtained in the exploratory factor analysis showed that this model revealed four factors with eigenvalue greater than 1, explaining the 64.0% of the cumulative variance. The majority of the items (86.4%) in the Serbian version of the OQLQ presented the highest loading weight in the subscales assigned by the OQLQ developer. CONCLUSIONS: The psychometric properties of the OQLQ (Serbian version) have exceptional internal consistency and reproducibility as an instrument for evaluation of dental malocclusions. Additionally, this questionnaire may be useful as a supplementary outcome measure in persons with malocclusions.

Relationship between the vertical craniofacial disproportions and the cervicovertebral morphology in adult subjects.

INTRODUCTION: Orthodontic diagnosis includes the interpretation of the relations between the craniofacial and cervical system, given the potential impact of the irregularities from one system to another. OBJECTIVE: The aim of this study was to examine morphological characteristics of the cervical spine, depending on the parameters of the vertical craniofacial growth and gender in adult subjects. METHODS: The sample comprised lateral cephalograms of 120 subjects with different vertical facial growth, aged 17.5-35 years. Measured parameters were the following: anterior and posterior vertebral body height (ABHC2-C5, PBHC2-C5), anterior and posterior intervertebral space (AISC2-C5, PISC2-C5), distance between vertebrae and point sella (SC2, SC3, SC4), pterygomaxillare (PmC2), gonion (GoC2) and basion (BaC4); cervical spine angulation (OPT/CVT) and inclination (OPT/HOR, CVT/HOR). RESULTS: Results showed that subjects with anterior facial growth rotation have greater values for BaC4, OPT/HOR, CVT/HOR, OPT/CVT, anterior and posterior vertebral body heights and intervertebral spaces, and lower values for GoC2 and PmC2. Higher values in males were found for anterior and posterior vertebral body heights, distances SC2, SC3, SC4, and BaC4. In females, the greater values were found for GoC2 and OPT/CVT. CONCLUSION: Subjects with anterior facial growth rotation have greater cervical spine inclination and angulation, higher cervical vertebrae and intervertebral spaces, longer upper cervical spines and shorter distances GoC2 and PmC2. Males show smaller cervical column curvature, but higher cervical vertebrae and greater length of the upper cervical spine.

Pharyngeal Airway Changes after Bimaxillary Orthognathic Surgery--Preliminary Results.

INTRODUCTION: Dentofacial deformity, a deviation from normal facial proportions and dental relationships, is corrected by jaw repositioning in all three spatial planes, which changes the position and tension of the surrounding tissues, bones and muscles. These changes may also affect the dimensions of the pharyngeal airways (PA). OBJECTIVE: The aim of this study was to evaluate and compare three-dimensional PA changes in patients treated by a combination mandibular set-back/maxillary advancement versus patients that had bimaxillary advancement with genioplasty. METHODS: The sample consisted of 7 patients treated by combined mandibular set-back/maxillary advancement and 7 patients treated with bimaxillary advancement surgery. Nasopharyngeal (NP) volume, oropharyngeal (OP) volume and the area of maximum constriction (AMC) in the OP were measured on CBCT scans (2 mA/120 kV/12" FOV) taken before (T1) and 3 months after surgery (T2). Paired samples t-test was used for analyzing statistical significance of changes (p ≤ 0.05). RESULTS: OP volume and AMC increase after bimaxillary advancement was statistically significant, while for the mandibular set-back group the increase was non-significant. NP volume was not reduced in any of the two groups. No significant differences in PA dimensions were found between groups at neither T1 nor T2 time points. CONCLUSION: Results suggest that the combination of mandibular set-back/maxillary advancement did not reduce airway dimensions, while bimaxillary advancement surgery led to a statistically significant increase in the OP dimensions.

The correlation between pain perception among patients with six different orthodontic archwires and the degree of dental crowding.

INTRODUCTION: Forces generated in orthodontic treatment with fixed appliances create tension and compression zones in the periodontal ligament resulting in a painful experience for patients. In the first phase of orthodontic treatment, when leveling of teeth is needed, nickel-titanium (NiTi) archwires can be completely engaged in brackets, even in the cases of extreme crowding, exerting small forces. There is a great individual variation in the pain perception related to the application of orthodontic forces. OBJECTIVE: The aim of this study was to investigate the pain perception among patients with dental crowding after insertion of six different NiTi orthodontic archwires as a part of fixed appliances in the first stage of orthodontic treatment. METHODS: The study was conducted on a sample of 189 orthodontic patients receiving one of six different either superelastic or heat activated NiTi archwires, in the first phase of orthodontic treatment. Pain perception was evaluated in groups of patients with different degree of crowding. The modified McGill Pain Questionnaire with Visual Analogue Scale was used to evaluate the quality and intensity of pain. Statistical analysis was performed using simple descriptive statistics, and Pearson's chi-square test with statistical significance of p<0.05. RESULTS: Majority of patients reported pain as discomfort or pressure of moderate intensity caused by chewing or biting, started within 12 hours, carried on for 3-4 days, and decreased over time without self-medication. CONCLUSION: No correlation was found between pain perception among patients with different types of NiTi archwires and the degree of crowdinq.

Changes in Cervical Lordosis and Cervicovertebral Morphology in Different Ages with the Possibility of Estimating Skeletal Maturity.

INTRODUCTION: During growth, proportions of craniofacial and cervical structures are changed. Craniofacial and cervicovertebral structures are morphologically and functionally connected, but their each other's influence is still unknown. OBJECTIVE: The aim of this study was to determine the changes in cervical lordosis and cervicovertebral morphology in different age periods and the possibility of estimating skeletal maturity, based on the percentage of anterior cervical vertebrae body height sum in the total anterior C2-C5 height. METHODS: The study included lateral radiographs of 120 patients of both sexes, divided into three different age groups: eight, 12-13 and 17-18 years of age. Five craniofacial and 15 cervical parameters were measured and analyzed. RESULTS: The results showed significant correlation between cervical lordosis angle and age, gender, anterior and posterior body height of C3, C4, C5, anterior C4-C5 and posterior C2-C3, C3-C4, C4-C5 intervertebral space, anterior body height of C2-C5. Overall values of all cervical body heights were more present in the total height of the spine in females, while all intervertebral spaces were more present in males. The percentage of anterior and posterior C2, C3, C4, C5 body height sum compared to total C2-C5 height increases with age. CONCLUSION: The cervical lordosis becomes more curved and vertebral bodies occupy more space in females, while intervertebral spaces occupy more in males. Skeletal maturity could be estimated following vertebral percentage distribution in the total anterior C2-C5 part.

Changes in subgingival microflora after placement and removal of fixed orthodontic appliances.

INTRODUCTION: The placement of fixed orthodontic appliances may lead to increased plaque accumulation and changes in subgingival microflora. OBJECTIVE: The aim of this study was to examine the changes in frequency of subgingival microflora that occur after placement and removal of fixed orthodontic appliance using polymerase chain reaction (PCR). METHODS: This study included 33 orthodontic patients, who were divided into two groups. Subgingival plaque samples were collected from the right upper incisor (U1) and right upper first molar (U6). In group A, the samples were taken three times: before placement appliance (T1), after one month (T2), and after 3 months (T3). In group B the samples were also taken three times: before appliance removal (T1), after one month (T2), and after three months (T3). PCR method was used to determine the presence of P. gingivalis, A. actinomycetemcomitans, T. forsythia, and P. intermedia. RESULTS: In group A the frequency of P. gingivalis showed statistically significant decrease at U1 (p = 0.049) and U6 (p = 0.008), from T1 to T2, and at U1 (p = 0.048) from T1 to T3. In group B only the frequency of T. forsythia showed a statistically significant decrease, at U6 (T1 vs.T2, p = 0.004; T1 vs.T3, p = 0.0003). Regarding other analyzed bacteria, changes in the presence were noticed but no statistical significance was found. CONCLUSION: Placement of fixed appliances may have an impact on subgingival microflora, but in the first months after the placement and removal of the appliance changes were not significant, probably due to good oral hygiene.

Ontogenetic changes of craniofacial complex in Turner syndrome patients treated with growth hormone.

OBJECTIVE: The present study assessed changes of craniofacial complex in Turner syndrome (TS) patients treated with growth hormone (GH) during development. The objective was to examine the growth rate and pattern of craniofacial structures and to establish effects of GH on craniofacial development. MATERIALS AND METHODS: The study population consisted of 15 TS patients treated with GH aged 5-18.5 years (13.3 ± 4.4) and corresponding control group of 45 females aged 6.8-18.7 (11.4 ± 2.6). According to the stage of cervical vertebral maturation, subjects were categorized into pre-growth (5 TS and 15 controls) and growth (10 TS and 30 controls) subgroups. The cephalometric analysis comprised angular and linear variables, measured on lateral cephalometric radiographs. RESULTS: The mandibular corpus/anterior cranial base ratio increased significantly only in controls during development. In growth period, ramus/corpus ratio was significantly larger in TS group. SNA and SNB angles were significantly smaller in TS growth subgroup compared to corresponding controls. Among other variables, no statistically significant differences were revealed. CONCLUSIONS: In TS patients treated with GH, growth capacities of cranial base and maxilla are adequate which can be attributed to GH treatment. Shape of mandible is altered due to decreased growth of corpus and overdeveloped ramus. Both maxillary and mandibular retrognathism are becoming more expressed during development. CLINICAL RELEVANCE: Favorable influence of GH on craniofacial complex growth rate and altered growth pattern revealed in this study should be considered while planning both orthodontic treatment and retention.

[Teeth size reduction in the prehistoric populations in Serbia].

INTRODUCTION: Anthropological studies show craniofacial changes with a reduction in teeth size during evolution of the human population. OBJECTIVE: The objective was to measure and compare the sizes of teeth in the population of the Mesolithic-Neolithic sites in the Iron Gate Gorge and the population from the Early Bronze Age site of Mokrin. METHODS: The study included teeth without advanced wear near the pulp. The material was divided according to the site of the skeletal population in two groups. Group 1 comprised 107 teeth from the Mesolithic-Neolithic sites Lepenski Vir and Vlasac. Group 2 included 158 teeth from the Mokrin graveyard dated in the Early Bronze Age. The mesio-distal diameter was measured in all teeth, while the vestibulo-oral diameter was measured in the molars only. Using the two-factor analysis of variance, the influence of sex, site and their interaction on the size of the teeth were investigated. RESULTS: The vestibulo-oral diameter of the upper third molar was significantly higher in males compared to females. The comparison between the groups showed that the vestibulooral diameter of the lower first molar was significantly higher in group 1. CONCLUSION: The present difference in teeth size indicates the existence of reduction during the prehistoric times. However, the time period between the populations studied is probably too short to be manifested on a large number of teeth.

Scanning electron microscopic examination of Enamel surface after fixed orthodontic treatment: in-vivo study.

INTRODUCTION: Therapy with fixed orthodontic appliances starts with bracket bonding and ends with debonding of brackets, leaving enamel surface varied. Objective The aim of this pilot study was to examine enamel surface before and after debonding of orthodontic brackets by the use of scanning electron microscopy (SEM). METHODS: Epoxy replicas of four patients' premolars indicated for therapy with fixed orthodontic appliances were made and brackets were bonded to their teeth with a different adhesives (Enlight, No-mix, Fuji Ortho LC and Heliosit Orthodontic) (n=4).Two months later, brackets on premolars were debonded and amounts of adhesive left on the tooth surfaces and the bracket bases were evaluated with the adhesive remnant index (ARI). After resin removal, epoxy replicas were made and the surface of premolars was evaluated with the enamel surface index (ESI). All replicas of premolars (n=32) were prepared for SEM examination and compared under different magnifications. Tooth damage was estimated based on correlation between ARItooth and ESI. RESULTS: Pearson's chi2 test showed no significant differences between ARItooth and ARIbracket of four materials used. Nonparametric correlations showed significant differences between ARItooth and ARIbracket, ESI and ARItooth, and between ESI and ARIbracket. Increasing of ARItooth is followed with the descent of ARIbracket and the ascent of ESI. Multivariate regression analysis showed a significant correlation between ESI and ARItooth. CONCLUSION: Most bond failures took place at enamel-adhesive interface. ARItooth was a predictor to enamel surface damage. The type of material did not affect enamel surface damage.

Reliability of computerized cephalometric outcome predictions of mandibular set-back surgery.

INTRODUCTION: A successful treatment outcome in dentofacial deformity patients commonly requires combined orthodontic-surgical therapy. This enables us to overcome functional, aesthetic and psychological problems. Since most patients state aesthetics as the primary motive for seeking therapy, cephalometric predictions of treatment outcome have become the essential part of treatment planning, especially in combined orthodontic-surgical cases. OBJECTIVE: The aim of this study was to evaluate the validity and reliability of computerized orthognathic surgery outcome predictions generated using the Nemotec Dental Studio NX 2005 software. METHODS: The sample of the study consisted of 31 patients diagnosed with mandibular prognathism who were surgically treated at the Hospital for Maxillofacial Surgery in Belgrade. Investigation was done on lateral cephalograms made before and after surgical treatment. Cephalograms were digitized and analyzed using computer software. According to measurements made on superimposed pre- and postsurgical cephalograms, the patients were retreated within the software and the predictions were assessed by measuring seven angular and three linear parameters. Prediction measurements were then compared with the actual outcome. RESULTS: Results showed statistically significant changes between posttreatment and predicted values for parameters referring to lower lip and mentolabial sulcus position. CONCLUSION: Computerized cephalometric predictions for hard-tissue structures in the sagittal and vertical planes, as well as the VTO parameters, generated using the Nemotec Dental Studio NX 2005 software are reliable, while lower lip and mentolabial sulcus position predictions are not reliable enough.

[Evaluation of agreement and correlation of three occlusal indices in an assessment of orthodontic treatment need].

BACKGROUND/AIM: Occlusal indices are quantitative diagnostic indicators of malocclusion severity, orthodontic treatment need, complexity and outcome. The aim of this study was to determine correlations and agreement among three occlusal indices: the Index of Orthodontic Treatment Need (IOTN), the Peer Assessment Rating Index (PAR) and the Index of Complexity, Outcome and Need (ICON) in evaluating orthodontic treatment need. METHODS: A total eighty study models of patients referred to the Department of Orthodontics, School of Dentistry, Belgrade, were assessed in this retrospective study. Malocclusions of various types and severity in the permanent dentition were included. RESULTS: The Aesthetic and the Dental Health Component of IOTN determined orthodontic treatment need in 25% and 51% of the patients, respectively. PAR determined orthodontic treatment need in 59% and ICON in 53% of patients. The Aesthetic Component of IOTN and ICON had the highest correlation (Spearman's correlation coefficient 0.95, p < 0.01). Correlations between indices were 0.44 to 0.61 with statistical significance (p < 0.01). The agreement between indices, calculated using Kappa statistics, was 0.22 to 0.63. CONCLUSION: The most critical in malocclusion assessment was PAR. The Aesthetic Component of IOTN and ICON correlated highly (p < 0.01). Correlations between other pairs of indices were moderate (p < 0.01). The Aesthetic Component of IOTN and ICON had substantial agreement, whereas agreement between other indices was fair or moderate. ICON could replace PAR and IOTN. Application of occlusal indices enables objective evaluation of orthodontic treatment need and easier determination of the treatment priorities.

[Dentaoalveolar changes in young adult patients with class II/1 malocclusion treated with the herbst appliance and an activator].

BACKGROUND/AIM: Functional appliances can be used effectively in the treatment of skeletal Class II/1 malocclusions. The best treatment results are obtained during active period of facial growth when skeletal, as well as dentoalveolar, changes occur. In comparison with removable functional appliances, such as activator, that are effective only during adolescent period of growth, the Herbst fixed appliance is also successful at the end of the growth period. It also offers a shorter treatment time and a patient compliance is not necessary. The aim of this study was to analyze and compare dentoalveolar changes in the group of young adult patients with Class II/1 malocclusion treated with the Herbst appliance and an activator. METHODS: The sample for this study consisted of 50 patients of both sexes, 14-21 years of age with Class II/1 malocclusion. For estimating the effect of functional appliances used, the following cephalometrics parameters were determined: inclination of the upper and lower incisors, interincisal angle, antero-posterior molars relationships, overjet and overbite. The results obtained were statistically tested. RESULTS: The cephalometric findings after the treatment indicated retroinclination of upper incisors (average value of 9 degrees) and proclination of lower incisors (average value of 7 degrees), mostly expressed in the patients treated by Herbst appliance (p < 0.001). Increased overjet and distocclusion were completely corrected in the group of patients treated with the Herbst appliance, while the correction of malocclusion in the activator group was only partially accomplished. No changes in the overbite were noticed at the end of the treatment in both groups. CONCLUSION: The results of this study revealed that the Herbst appliance is more effective in the treatment of Class II/1 malocclusion in young adults in comparison with the activator.

[Orthodontic treatment of nongrowing patient with Class II Division 2 malocclusion by Herbst appliance].

BACKGROUND: Inheritance is most casual etiological factor of Class II division 2 malocclusion. This kind of malocclusion is very difficult for treatment specially in older patients. CASE REPORT: In the female patient, 20 years old, at the beginning of the treatment at the School of Dentistry in Belgrade, lateral cephalogram showed skeletal and dentoalveolar Class II division 2 malocclusion. She was in the Herbst treatment for 8 months and 12 months more with a fixed multibracket appliance. The measurements were performed on lateral cephalograms before and after the treatment: ii, is, mi, ms, Pg and ss. The distance from these points to occlusal perpendicular line (Olp) were measured and compared from cephalogram before to cephalogram after the treatment. Temporomandibular joint (TMJ) tomograms were compared from before and after the treatment by superimposition. Correction was found in molar and incisor relation, overjet and overbite. There were found sagital skeletal changes and soft tissue profile improvement. CONCLUSION: Herbst appliance is effective in the treatment of Class II malocclusions, even in adult patients. Dental and skeletal changes as a result of Herbst treatment could be good choice instead of camouflage orthodontics or surgical decision.