RESUMEN
Current commercial air-quality monitoring devices lack a large dynamic range, especially at the small, ultrafine size scale. Furthermore, there is a low density of air-quality monitoring stations, reducing the precision with which local particulate matter hazards can be tracked. Here, we show a low-cost, lensfree, and portable air-quality monitoring device (LPAQD) that can detect and measure micron-sized particles down to 100 nm-sized particles, with the capability to track and measure particles in real time throughout a day and the ability to accurately measure particulate matter densities as low as 3 µg m-3. A vapor-condensed film is deposited onto the coverslip used to collect particles before the LPAQD is deployed at outdoor monitoring sites. The vapor-condensed film increases the scattering cross section of particles smaller than the pixel size, enabling the sub-pixel and sub-diffraction-limit-sized particles to be detected. The high dynamic range, low cost, and portability of this device can enable citizens to monitor their own air quality to hopefully impact user decisions that reduce the risk for particulate matter-related diseases.
RESUMEN
Transferring graphene from copper foil to a target substrate should ideally be a nondestructive process, but cracks, holes, and wrinkles have proved difficult to prevent. Here we report a method in which we use a commercially available copolymer in addition to poly(methylmethacrylate) (PMMA) to obtain 99.8% continuous centimeter-scale transferred graphene. Our findings are based on characterization using Raman spectroscopy, quantitative image analysis, scanning electron microscopy, and terahertz time-domain spectroscopy. Compared to conventional methods, this copolymer-assisted approach not only results in fewer holes, but also effectively eliminates cracks and wrinkles. We attribute this to a more thorough relaxation of the initially deposited PMMA by solvent contained in the thicker copolymer layer. This results in improved contact at the PMMA-graphene interface before removal of the underlying copper substrate.
