RESUMEN
Background: Evaluate the effects of incorporating silica-coated silver nanoparticles (Ag@SiO2 NPs) into odontological clinic resin materials. Material and Methods: Silver nanoparticles coated with silicon dioxide were added to the experimental resin matrix at 1, 3, and 5wt%. Degree of conversion (DC), optical properties (total transmittance and color change), and microstructural analysis were evaluated. Materials were tested for silver ion release, cytotoxicity in dental pulp fibroblasts, Streptococcus mutans biofilm growth by Colony-Forming Unit (CFU) and confocal laser scanning microscopy (CLSM). Results: Groups had a similar DC, despite significant differences observed in transmittance and color change analysis for all groups with NPs. Silver ion release values were below the detection limit after 72h for all groups, and NPs incorporation did not show a statistical difference from the control on pulp fibroblasts assay. After 72h, the CFU count was significantly reduced by 74% from 3wt% of Ag@SiO2NPs. CLSM evaluation on S. mutans colonies showed a dose-dependent decrease in the emitted fluorescence. Conclusions: The application of Ag@SiO2 NPs in a resinous matrix, demonstrates a significant reduction of S. mutans CFU in oral biofilm, at concentrations from 3wt%, without an increase in cytotoxicity. The reduced transmittance values did not affect the DC, although a significant color change was perceived in all concentrations. Key words:Nanoparticles, Silver Compounds, Composite Dental Resin, Anti-Bacterial Agent, Optical Imaging.
RESUMEN
A elevada produção global de Mangifera indica gera uma considerável quantidade de resíduos, como cascas e sementes que são frequentemente descartados. O aproveitamento desses subprodutos promove uma abordagem mais sustentável, reduzindo impactos ambientais e abrindo novas perspectivas na área fitocosmética. A casca apresenta metabólitos secundários conhecidos principalmente por suas propriedades antioxidantes, destacando-se os compostos fenólicos. Esses antioxidantes são capazes de retardar a velocidade de oxidação promovida por radicais livres formados por fatores externos ou fisiopatológicos. Assim, antioxidantes naturais extraídos a partir de espécie vegetal estão sendo cada vez mais estudados para aplicação na indústria cosmética e farmacêutica. O potencial fitocosmético do extrato glicólico da casca de M. indica L. var. Tommy Atkins em três bases galênicas (gel de Carbopol®, gel-creme e gel de Estagel®) foi avaliado por meio dos ensaios de atividade antioxidante, pelo método do radical DPPH, e estudos de estabilidade. As formulações com o extrato apresentaram-se estáveis e compatíveis para o uso tópico, pois não foram verificados sinais de instabilidade como alteração das características organolépticas e do pH. Em relação à atividade antioxidante, formulações com o extrato apresentaram potencial antioxidante, porém a formulação com Carbopol® e gel-creme apresentaram melhor desempenho em relação ao Estagel®. Após 30 dias de estabilidade preliminar em diferentes condições de temperatura (40,0 ± 2<0°C, 20,0 ± 5,0°C, 5,0 ± 2,0°C) houve redução de atividade antioxidante somente no gel de Carbopol® armazenado sob elevada temperatura, indicando a melhor forma de armazenamento. Diante disso, os resultados sugerem a promissora incorporação de M. indica L. var. Tommy Atkins em bases cosméticas.
The high global production of Mangifera indica generates a considerable amount of waste, such as peels and seeds that are often discarded. The use of these by-products promotes a more sustainable approach, reducing environmental impacts and opening new perspectives in the phytocosmetics area. The peel presents secondary metabolites known mainly for their antioxidant properties, highlighting phenolic compounds. These antioxidants are capable of slowing down the rate of oxidation promoted by free radicals formed by external or pathophysiological factors. Thus, natural antioxidants extracted from plant species are increasingly being studied for application in the cosmetic and pharmaceutical industry. The phytocosmetic potential of the glycolic extract from the peel of M. indica L. var. Tommy Atkins in three galenic bases (Carbopol® gel, cream gel and Estagel® gel) was evaluated through antioxidant activity tests, the DPPH radical scavenging method, and stability studies. The formulations with the extract were stable and compatible for topical use, as there were no signs of instability such as changes in organoleptic characteristics and pH. Regarding antioxidant activity, formulations with the extract showed antioxidant potential, however the formulation with Carbopol® and gel-cream showed better performance compared to Estagel®. After 30 days of preliminary stability in different temperature conditions (40.0 ± 2<0°C, 20.0 ± 5.0°C, 5.0 ± 2.0°C) there was a reduction in antioxidant activity only in the gel of Carbopol® stored at high temperature, indicating the best form of storage. Therefore, the results suggest the promising incorporation of M. indica L. var. Tommy Atkins in cosmetic foundations.
RESUMEN
OBJECTIVE: to investigate the effect of different concentrations of chitosan added to experimental resins containing either BAPO or camphorquinone (CQ) as photoinitiators, regarding degree of conversion (DC), flexural strength (FS), flexural elastic modulus (E), Knoop microhardness (KHN), cytotoxicity, genotoxicity and antimicrobial activity. METHODS: Experimental resins with polymeric matrix of BisGMA and TEGDMA was added either 0.5 wt% BAPO or 0.5 wt% camphorquinone/0.2% amine along with and chitosan concentrations of 0.5%; 1.0% or 2.0%. Degree of conversion was measured using Fourier transformed infrared spectroscopy. Flexural strength and elastic modulus were obtained through three-point bending test and Knoop microhardness was measured in a microidenter. Direct cytotoxicity was performed in human keratinocytes and genotoxicity test was done in murine macrophages cells. Antimicrobial activity was acessed against Staphylococcus aureus and Streptococcus mutans through the inhibition halo. Data were analyzed using two-way ANOVA and Tukey teste (α = 0.05). RESULTS: The materials containing photoinitiator BAPO showed higher values of DC, FS, E, and KHN compared to resins with CQ. The addition of chitosan did not affect the properties of these materials. However, in resins containing CQ, the addition of chitosan improve these properties compared to control group. For the groups containing BAPO the chitosan reduced cytotoxicity and genotoxicity compared to materials with camphorquinone. The materials with 1.0% and 2.0% chitosan showed increased antibacterial activity in the materials containing BAPO as photoinitiator for both bacteria. SIGNIFICANCE: The alternative photoinitiator BAPO and chitosan can improve physical and biological properties of photoactivated resins when compared with the materials with photoinitiator camphorquinone.
Asunto(s)
Antiinfecciosos , Quitosano , Humanos , Animales , Ratones , Resinas Compuestas/química , Quitosano/farmacología , Alcanfor/farmacología , Alcanfor/química , Ensayo de Materiales , Metacrilatos , Polimerizacion , Bisfenol A Glicidil Metacrilato/químicaRESUMEN
Chitosan particles loaded with dibasic calcium phosphate anhydrous (DCPA) is a promising strategy for combining antimicrobial and osteoconduction properties in regenerative medicine. However, mostly micrometer-sized particles have been reported in the literature, limiting their use and reducing their effect in the biomedical field. We have recently overcome this limitation by developing submicrometer-sized particles with electrospray technique. The objective of this study was to understand how the process parameters control the size and properties of submicrometer chitosan particles loaded with DCPA. Solutions of 10 mg/mL chitosan and 2.5 mg/mL DCPA in a 90% acetic acid were electrosprayed under three distinct flow rate conditions: 0.2, 0.5, and 1.0 mL/h. The particles were crosslinked in a glutaraldehyde atmosphere and characterized in terms of their morphology, inorganic content, zeta potential, and minimum inhibitory concentration (MIC) against S. mutans. All conditions showed particles with two similar morphologies: one small-sized with a spherical shape and another larger-sized with a bi-concave shape. All generated a broad particle size distribution, with a similar mean size of ~ 235 nm. The addition of DCPA decreased the zeta potential for all the samples, but it was above 30 mV, indicating a low aggregation potential. The lower flow rate showed the worst efficacy for DCPA incorporation. Antimicrobial activity was greater in chitosan/DCPA particles with flow rate of 0.5 mL/h. It can be concluded that the flow rate of 0.5 mL/h presents the best compromise solution in terms of morphology, zeta potential, MIC, and inorganic content.
Asunto(s)
Antiinfecciosos , Quitosano , Tamaño de la Partícula , Fosfatos de Calcio , Antiinfecciosos/farmacologíaRESUMEN
The development of restorative materials containing antibacterial agents is an alternative to reduce the progression of caries lesions. OBJECTIVE: to compare the influence of the degree of crosslinking of chitosan particles loaded with dibasic calcium phosphate (DCPA) on the mechanical properties, degree of conversion (DC), and antimicrobial properties of experimental composites. METHODS: Chitosan/DCPA particles were synthesized by the electrospraying, crosslinked by 0, 8, or 16 h in glutaraldehyde, and characterized by zeta potential and minimum inhibitory concentration (MIC) against S. mutans. Experimental resin composites of Bis-GMA and TEGDMA and 59.5% of barium glass were synthesized, chitosan/DCPA particles were added at 0 or 0.5 wt% with the different crosslinking time. The materials were subject to DC analysis, three-point bending test at 24 h and 7 days, and antimicrobial assays. Data were submitted to one-way ANOVA and Tukey test (α = 0.05). RESULTS: The particles with longer crosslinking time presented higher zeta potential and MIC, and the composite containing these particles showed significantly higher biofilm inhibition than the control group. The other two groups were similar to each other and the control. The composite containing particles with 88 h crosslinking time showed the lowest flexural strength at 7 days in water, and materials with non-crosslinked particles and longer crosslinking time presented flexural strength similar to control. The flexural modulus and DC showed no statistical difference among groups. SIGNIFICANCE: composite resin containing 0.5% chitosan/DCPA particles crosslinked by 16 h showed a reduction of biofilm formation without affecting the mechanical properties in relation to the control.
Asunto(s)
Antiinfecciosos , Quitosano , Antibacterianos/farmacología , Bisfenol A Glicidil Metacrilato , Fosfatos de Calcio/farmacología , Resinas Compuestas/farmacología , Ensayo de Materiales , Metacrilatos , Ácidos FtálicosRESUMEN
OBJECTIVE(S): This study aimed investigate association of HLA-DRB1 and cytokine polymorphisms with red blood cell(RBC) alloimmunization in Brazilian Myelodysplastic syndrome(MDS) patients with prior exposure to RBC transfusion. BACKGROUND: MDS patients are at risk RBC alloimmunization due to chronic RBC transfusion. However, differences in immune response of MDS transfused patients are not completely known. METHODS/MATERIALS: A retrospective cohort of 87 polytransfused patients with MDS including 28 alloimmunized (PA) and 59 non-alloimmunized (PNA) was evaluated in three Brazilian reference hospitals. HLA-DRB1genotype was performed by polymerase chain reaction (PCR)-SSOP (Luminex platform) and cytokine polymorphisms analysed by PCR and TaqMan assays. RESULTS: While HLA-DRB1 allele frequencies did not differ between groups, IL17A 197G > A SNP and IL4 polymorphisms showed significant correlation with RBC alloimmunization. IL17A 197A allele A and AA genotype were significantly more frequent in PA than PNA(A, 46.4% versus 27.1%, p = 0.012; OR = 2.3; 95%CI = 1.1-4.9; AA, 25% versus 6.8%, p = 0.041; OR = 6.2; 95%CI 1.3-30.8). Moreover, significant association of alloimmunization to Rh antigens with IL17A 197A allele and AA genotype was also identified in PA group(A, 45% versus 27.1%, p = 0.036; OR = 2.5; 95% CI 1.1-5.7; AA, 30% versus 6.8%, p = 0.042; OR = 7.9; 95%CI 1.5-42.3). Genotype A1A2 of IL4 intron 3 was overrepresented in PA(50% versus 16.9%, p = 0.009; OR = 4.97; 95%CI 1.6-15.5). Similarly, IL4-590 CT genotype was overrepresented in PA(53.6% versus 28.8%, p = 0.049; OR = 3.3; 95%CI 1.2-9.3). CONCLUSIONS: This study showed no association regarding HLA-DRB1 alleles for RBC alloimmunization risk or protection, however the IL17A 197G>A, IL4 intron 3 and IL4 590C>T SNP was significantly associated to RBC alloimmunization risk in this cohort of Brazilian MDS patients.
Asunto(s)
Anemia Hemolítica Autoinmune , Cadenas HLA-DRB1 , Interleucina-17 , Interleucina-4 , Síndromes Mielodisplásicos , Anemia Hemolítica Autoinmune/genética , Brasil , Citocinas/genética , Eritrocitos , Cadenas HLA-DRB1/genética , Humanos , Interleucina-17/genética , Interleucina-4/genética , Isoanticuerpos , Síndromes Mielodisplásicos/genética , Síndromes Mielodisplásicos/terapia , Estudios RetrospectivosRESUMEN
Angiogenesis is a key process that provides a suitable environment for successful tissue engineering and is even more crucial in regenerative endodontic procedures, since the root canal anatomy limits the development of a vascular network supply. Thus, sustainable and accelerated vascularization of tissue-engineered dental pulp constructs remains a major challenge in cell homing approaches. This study aimed to functionalize a chitosan hydrogel scaffold (CS) as a platform loaded with secretomes of stem cells from human exfoliated deciduous teeth (SHEDs) and evaluate its bioactive function and pro-angiogenic properties. Initially, the CS was loaded with SHED secretomes (CS-S), and the release kinetics of several trophic factors were assessed. Proliferation and chemotaxis assays were performed to analyze the effect of functionalized scaffold on stem cells from apical papilla (SCAPs) and the angiogenic potential was analyzed through the Matrigel tube formation assay with co-cultured of human umbilical vein endothelial cells and SCAPs. SHEDs and SCAPs expressed typical levels of mesenchymal stem cell surface markers. CS-S was able to release the trophic factors in a sustained manner, but each factor has its own release kinetics. The CS-S group showed a significantly higher proliferation rate, accelerated the chemotaxis, and higher capacity to form vascular-like structures. CS-S provided a sustained and controlled release of trophic factors, which, in turn, improved proliferation, chemotaxis and all angiogenesis parameters in the co-culture. Thus, the functionalization of chitosan scaffolds loaded with secretomes is a promising platform for cell homing-based tissue engineering.
Asunto(s)
Quitosano , Hidrogeles , Quitosano/farmacología , Pulpa Dental/metabolismo , Células Endoteliales de la Vena Umbilical Humana/metabolismo , Humanos , Hidrogeles/química , Hidrogeles/farmacología , Secretoma , Ingeniería de Tejidos/métodos , Andamios del Tejido/químicaRESUMEN
BACKGROUND: Botulinum toxin type A (BTX-A) is recent technique for the treatment of gummy smile. OBJECTIVES: The aim of this randomized controlled preliminary clinical trial was to evaluate the effects of BTX-A on excessive gingiva display (EGD) reduction, muscle activity, and patient satisfaction at 2, 8, 12, 16, 21, and 25 weeks. METHODS: Group 1 (G1) received 4 points of BTX-A application (2 U/point) for relaxation of the levator labii superioris alaeque nasi and levator labii superioris muscles; Group 2 (G2) received 2 points of BTX-A (2 U/point) for relaxation of only the levator labii superioris alaeque nasi muscle. RESULTS: A high dropout of patients from follow-up sessions occurred. Therefore, because of this data limitation, the results were considered a preliminary outcome. At 2 weeks, there was a significant difference between baseline regarding the reduction of EGD in G1 and G2, reduction in muscle activity in G1, and increased satisfaction in G1 and G2. At 2 weeks, there was no difference between the 2 groups. Statistically significant EGD reduction was maintained until 16 weeks in G2 and 25 weeks in G1. After 14 days there was a gradual recovery of muscle activity in both groups until recovery of baseline values by 25 weeks. Patients' satisfaction with treatment lasted 21 weeks in G1 and 16 weeks in G2. CONCLUSIONS: Increasing the number of BTX-A injection points resulted in a prolonged effect regarding EGD reduction and patient satisfaction but did not increase the intensity of the outcome. However, due to the high dropout of patients, this is a preliminary conclusion and further studies are necessary to confirm these results.
Asunto(s)
Toxinas Botulínicas Tipo A , Estética Dental , Encía , Humanos , Labio , Sonrisa/fisiologíaRESUMEN
BACKGROUND: To clinically evaluate the effect of 35% hydrogen peroxide gel renewal in association with violet LED (405-410nm) through a split-mouth randomized controlled clinical trial. METHODS: The treatment consisted in 3 bleaching sessions of 15 min each, with an interval of 7 days between them, using 35% hydrogen peroxide combined to violet LED irradiation. Selected patients had two experimental segments for the split-mouth design: No change of the bleaching gel during each session (NBGR) and 3 changes of the bleaching gel every 5 min for each session (BGR). During the 3 bleaching sessions, the selected quadrant received the same treatment. Patients had their upper canines and central incisors teeth color measured with a subjective (color scale - VITA Classical) and an objective (spectrophotometer - VITA Easyshade) method and their teeth sensitivity measured using a Visual Analog Scale (VAS) before, immediately after each bleaching session, and 14 days and 2 months (60 days) after the end of the treatment. RESULTS: The protocol adopted in the present study reached satisfactory results regarding color change. No statistical difference between groups was observed immediately after the end of the treatment and in the follow-up analysis for both subjective and objective color evaluation. No difference in tooth sensitivity between segments was observed. CONCLUSION: There is no need for bleaching gel renewal when following the clinical protocol of 3 sessions of 15 min in a bleaching protocol of 35% hydrogen peroxide combined with violet LED.
Asunto(s)
Fotoquimioterapia , Blanqueadores Dentales , Blanqueamiento de Dientes , Color , Humanos , Peróxido de Hidrógeno , Boca , Fotoblanqueo , Fotoquimioterapia/métodos , Fármacos Fotosensibilizantes/farmacología , Resultado del TratamientoRESUMEN
MacLeish in Aiuruoca, Minas Gerais State, Brazil). Eremanthus erythropappus (DC.) MacLeish is a native species, economically appreciated due to its wood and the extraction of essential oil, whose active ingredient is alphabisabolol, but studies on genetic improvement of this species are still scarce. The aim of this study was to evaluate survival, genetic variability and estimate genetic parameters in E. erythropappus progenies in the field at 15, 22 and 30 months of age. The experiment was set up at Fazenda Guapiara, in Aiuruoca, Minas Gerais State, where seedlings of 15 progenies were planted in a randomized block design with five replications and six plants per plot. Plant height evaluations were performed and genetic studies were carried out in the SELEGEN software using the REML/BLUP method. At 30 months, the percentage of seedling survival was evaluated. Significant differences were observed between progenies, and the highest estimates of h²mp (0.48) and Acprog (0.69) were found at 30 months. Therefore, even in the juvenile stage, it was possible to identify genetic variability and analyze its expression over time, which makes it possible to continue studies of genetic improvement of the species.
MacLeish em Aiuruoca, MG, Brasil). Eremanthus erythropappus (DC.) MacLeish é uma espécie nativa, apreciada economicamente devido a sua madeira e à extração de óleo essencial, cujo princípio ativo é o alfabisabolol, porém os estudos em melhoramento genético dessa espécie ainda são escassos. Objetivou-se com este trabalho avaliar a sobrevivência e estimar parâmetros genéticos em progênies de E. erythropappus em campo aos 15, 22 e 30 meses de idade. O experimento foi instalado na Fazenda Guapiara, em Aiuruoca, MG, onde foram plantadas mudas de 15 progênies em delineamento de blocos casualizados, com cinco repetições e seis plantas por parcela. Foram realizadas avaliações da altura das plantas e procederam-se aos estudos genéticos no software SELEGEN por meio do método REML/BLUP. Aos 30 meses, foi avaliado o percentual de sobrevivência das mudas. Verificou-se diferenças significativas entre as progênies, e as maiores estimativas de h²mp (0,48) e de Acprog (0,69) foram encontradas aos 30 meses. Portanto, mesmo em estágio juvenil, foi possível identificar variabilidade genética e analisar a sua expressão ao longo do tempo, o que possibilita dar continuidade aos estudos visando o melhoramento genético da espécie.
RESUMEN
BACKGROUND: The regeneration of dental pulp, especially in cases of pulp death of immature teeth, is the goal of the regenerative endodontic procedures (REPs) that are based on tissue engineering principles, consisting of stem cells, growth factors, and scaffolds. Photobiomodulation therapy (PBMT) showed to improve dental pulp regeneration through cell homing approaches in preclinical studies and has been proposed as the fourth element of tissue engineering. However, when a blood clot was used as a scaffold in one of these previous studies, only 30% of success was achieved. The authors pointed out the instability of the blood clot as the regeneration shortcoming. Then, to circumvent this problem, a new scaffold was developed to be applied with the blood clot. The hypothesis of the present study was that an experimental injectable chitosan hydrogel would facilitate the three-dimensional spatial organization of endogenous stem cells in dental pulp regeneration with no interference on the positive influence of PBMT. METHODS: For the in vitro analysis, stem cells from the apical papilla (SCAPs) were characterized by flow cytometry and applied in the chitosan scaffold for evaluating adhesion, migration, and proliferation. For the in vivo analysis, the chitosan scaffold was applied in a rodent orthotopic dental pulp regeneration model under the influence of PBMT (660 nm; power output of 20 mW, beam area of 0.028 cm2, and energy density of 5 J/cm2). RESULTS: The scaffold tested in this study allowed significantly higher viability, proliferation, and migration of SCAPs in vitro when PBMT was applied, especially with the energy density of 5 J/cm2. These results were in consonance to those of the in vivo data, where pulp-like tissue formation was observed inside the root canal. CONCLUSION: Chitosan hydrogel when applied with a blood clot and PBMT could in the future improve previous results of dental pulp regeneration through cell homing approaches.
Asunto(s)
Quitosano , Pulpa Dental , Terapia por Luz de Baja Intensidad , Regeneración , Andamios del Tejido/química , Animales , Células Cultivadas , Quitosano/química , Quitosano/farmacología , Pulpa Dental/citología , Pulpa Dental/efectos de los fármacos , Pulpa Dental/efectos de la radiación , Humanos , Hidrogeles/química , Masculino , Ratas , Ratas Wistar , Regeneración/efectos de los fármacos , Regeneración/efectos de la radiación , Células Madre/citología , Células Madre/efectos de los fármacos , Células Madre/efectos de la radiación , Ingeniería de TejidosRESUMEN
The evaluation of coffee quality in Brazil for commercialization is conducted mainly through sensory analysis, also known as the "cup test", in which professional tasters evaluate and score various attributes. The adoption of chemical methods could complement the sensory classification of beverages, if correlations between these chemical and sensory analyses exist, making classification less subjective. This work aimed to identify the relationships between the chemical and sensorial traits of coffee-beverage quality and to evaluate the use of these traits as criteria for the selection of Bourbon cultivars. Twenty coffee genotypes from the first three harvests across five municipalities of the state of Minas Gerais, Brazil were evaluated. The genotypic values, predicted for each genotype, were used to determine the index based on the sum of ranks from Mulamba and Mock. The genetic correlations among the evaluated traits were also estimated. The presented evaluations were not able to efficiently detect genetic and phenotypic relationships between the chemical and sensorial characteristics of drink quality, but as selection criteria for generation advancement in the beverage quality, it is possible to use these characteristics. Bourbon Amarelo LCJ 9-IAC, Bourbon Amarelo-Procafé, Bourbon Amarelo-Boa Vista, Bourbon Vermelho-São João Batista, and Bourbon Amarelo-Samambaia were the genotypes with the most promising cup quality in the studied regions. Through the selection of these five genotypes, the selection gain was 1.65% for sensory score for beverage quality, when the interaction among the studied environments was removed. The heritability was 92% for improving this trait.
Asunto(s)
Coffea/genética , FitomejoramientoRESUMEN
BACKGROUND: Herpes Simplex Virus Type 1 (HSV-1) is one of the most widespread infections that can effect the orofacial region. Recurrent infection is considered a life-long oral health problem, leading to pain, discomfort, and social restriction due to esthetic features when active. Effective therapies are needed. This study aimed to compare photodynamic therapy (PDT), Topical Acyclovir (AC), and the association of both in the healing process and self-reported symptomologies of HSV-1 recurrences. METHODS: Patients were randomly assigned into 3 groups (n = 25): PDT (low-power laser, 660 nm, 40 mW, 120 J/cm2, 4.8 J, 120 s per point) and methylene blue (0.005 %) as photosensitizer; AC (5%); PDT + AC.Data concerning lesion size, healing time, and self-reported healing parameters, such as pain, tingling, and edema were taken every day up to complete healing for all studied groups. RESULTS: There was no significant difference in healing time and pain between groups. AC group showed a significant minor reduction of the lesion compared to the AC-PDT group on day 1. Regarding edema and tingling, the comparison of treatments showed a statistical difference only on day 1, where PDT showed better results. CONCLUSION: With all the limitations of this study, it can be concluded that only on day 1 PDT showed positive effects in the treatment of herpes lesions in comparison to AC.
Asunto(s)
Herpes Labial , Herpesvirus Humano 1 , Fotoquimioterapia , Aciclovir/uso terapéutico , Herpes Labial/tratamiento farmacológico , Humanos , Fotoquimioterapia/métodos , Fármacos Fotosensibilizantes/uso terapéutico , RecurrenciaRESUMEN
INTRODUCTION: Orthodontic aligners use have increased in dentistry. The resolution of complex movements such as extrusion demands the use of attachments to reach the aimed force, but just a few studies have been developed to evaluate the biomechanical performance of the aligners and their accessories. OBJECTIVE: The objective of this study was to evaluate on the three axes (X, Y and Z) the forces generated by three different attachment designs for the extrusion of the maxillary central incisor using esthetic orthodontic aligners. METHODS: Three prototypes of maxillary models were developed, each one with a specific attachment inserted in the central incisor. Three aligners were manufactured for each of the three attachment designs, with 0.33-mm activation in the direction of the extrusion. An analytical device was used to evaluate the forces applied to the three axes by each aligner/attachment. The data were assessed by one-way ANOVA and Tukey's test (α = 0.05). RESULTS: All of the studied attachment designs could satisfactorily perform the extrusion movement. However, force intensities were different in the three designs (design 1 = 2.5 N; design 2 = 2.2 N, and design 3 = 1.1 N). Furthermore, two of the three attachment designs (designs 1 and 2) eventually exerted significant forces on the X (mesiodistal) and Y (buccopalatal) axes. CONCLUSION: The attachment design 3 presents the best distribution of forces for extrusion movement, generating almost null forces on X and Y axes, and lower intensity of force on the Z axis.
Asunto(s)
Incisivo , Diseño de Aparato Ortodóncico , Estética Dental , Maxilar , Técnicas de Movimiento DentalRESUMEN
ABSTRACT Introduction: Orthodontic aligners use have increased in dentistry. The resolution of complex movements such as extrusion demands the use of attachments to reach the aimed force, but just a few studies have been developed to evaluate the biomechanical performance of the aligners and their accessories. Objective: The objective of this study was to evaluate on the three axes (X, Y and Z) the forces generated by three different attachment designs for the extrusion of the maxillary central incisor using esthetic orthodontic aligners. Methods: Three prototypes of maxillary models were developed, each one with a specific attachment inserted in the central incisor. Three aligners were manufactured for each of the three attachment designs, with 0.33-mm activation in the direction of the extrusion. An analytical device was used to evaluate the forces applied to the three axes by each aligner/attachment. The data were assessed by one-way ANOVA and Tukey's test (α = 0.05). Results: All of the studied attachment designs could satisfactorily perform the extrusion movement. However, force intensities were different in the three designs (design 1 = 2.5 N; design 2 = 2.2 N, and design 3 = 1.1 N). Furthermore, two of the three attachment designs (designs 1 and 2) eventually exerted significant forces on the X (mesiodistal) and Y (buccopalatal) axes. Conclusion: The attachment design 3 presents the best distribution of forces for extrusion movement, generating almost null forces on X and Y axes, and lower intensity of force on the Z axis.
RESUMO Introdução: O uso de alinhadores ortodônticos tem aumentado na Odontologia. Porém, para a realização de movimentos complexos, como a extrusão, é necessário usar attachments para se obter as forças desejadas. Apesar disso, há poucos estudos que tenham avaliado o desempenho biomecânico dos alinhadores e de seus attachments. Objetivo: O objetivo do presente estudo foi avaliar nos três eixos (X, Y e Z) as forças geradas por três diferentes designs de attachments para extrusão de um incisivo central superior usando alinhadores ortodônticos. Métodos: Foram confeccionados três modelos superiores prototipados, cada um com um tipo de attachmentinserido no incisivo central. Três alinhadores foram fabricados para cada um dos três designs de attachment, com ativação de 0,33 mm na direção da extrusão. Foi, então, utilizado um equipamento de análise para mensurar, nos três eixos, as forças aplicadas por cada alinhador/attachment. Os dados foram submetidos à ANOVA de fator único e ao teste de Tukey (α?#8197;= 0,05). Resultados: Todos os designs de attachments utilizados foram capazes de exercer satisfatoriamente o movimento de extrusão. Entretanto, a intensidade das forças foi diferente nos três designs (attachment 1 = 2,5 N; attachment 2 = 2,2 N e attachment 3= 1,1 N). Além disso, dois dos três designs (attachments 1 e 2) exerceram forças significativas nos eixos X (mesiodistal) e Y (vestibulopalatino). Conclusões: o design do attachment 3 apresentou a melhor distribuição de forças para o movimento de extrusão, sendo o mais próximo de forças nulas nos eixos X e Y e força de baixa intensidade no eixo Z.
Asunto(s)
Diseño de Aparato Ortodóncico , Incisivo , Técnicas de Movimiento Dental , Estética Dental , MaxilarRESUMEN
OBJECTIVES: this study aimed to synthesize AgNPs from green tea (GT) extract, forming GT-AgNPs, and to coat their surfaces with silica, resulting in light-colored Ag@SiO2 nanoparticles. MATERIALS AND METHODS: particles were characterized and tested for minimal inhibitory concentration (MIC), biofilm formation against Streptococcus mutans and cytotoxicity evaluation on dental pulp fibroblasts. RESULTS: X-ray diffraction (XRD) confirmed the formation of pure AgNPs, whereas energy dispersive X-ray spectroscopy (EDS) mapped their elemental atoms. Dynamic light scattering (DLS) demonstrated formation of particles at nanoscale, with moderate polydispersity and negative zeta potential, in agreement with nanoparticle tracking analysis (NTA) size measurements. Fourier-transformed infrared (FTIR) spectroscopy confirmed the successful condensation of silica, which significantly increased surface area by 50%, as assayed by surface area analysis (BET). Thermogravimetric analysis showed a 18%-mass of silica on the surface of Ag@SiO2NPs. Transmission electron microscopy (TEM) displayed the spherical shape of nanoparticles and average size of 11â¯nm for GT-AgNPs and Ag@SiO2NPs. Ag@SiO2NPs demonstrated potent antimicrobial action against S. mutans, with MIC determined as 600⯵g/mL, and inhibition of approximately 44% (pâ¯<â¯0.05) of biofilm formation. At the MIC concentrations, both NPs did not exhibit cytotoxicity. CONCLUSION: Ag@SiO2NPs might have a useful application in dental materials. CLINICAL SIGNIFICANCE: The possibility of incorporating antimicrobial properties in restorative materials without compromising esthetics makes the AgNPs@SiO2 NPs promising agents against S. mutans biofilm formation, hence the prevention of dental caries. This represents a great step towards the development of more interactive biomaterials in dentistry to overcome clinical problems.
Asunto(s)
Antiinfecciosos , Caries Dental , Nanopartículas del Metal , Antibacterianos/farmacología , Antiinfecciosos/farmacología , Estética Dental , Humanos , Pruebas de Sensibilidad Microbiana , Extractos Vegetales , Dióxido de Silicio , Plata/farmacología , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
BACKGROUND: Knowledge, attitudes, and beliefs of the students are important for the Tissue Engineering in Endodontic practice. The opinion of these future dentists would ultimately will decide the endurance of REPs as routine procedures in endodontic practice. The aim of this study was to perform a survey to identify the knowledge, attitudes, and practices of undergraduate students about regenerative endodontic procedures (REPs). METHODS: The questionnaire was obtained after cross-cultural adaptation of a questionnaire previously applied in USA and was applied to two hundred forty-eight undergraduates. Data were statistically analyzed. RESULTS: Most of the students (82.9%) agreed that regenerative therapy should be incorporated to dentistry and 87.5% of them believed that stem cells banks would be useful for the tissue regeneration. Most participants (58.1%) would like to obtain an internship/tutoring that addresses REPs and 80.8% of participants think that the major obstacle to a patient accepting a REP was the expected high cost of the treatment. The freshmen students were more optimistic about offering stem cell treatments to their patients (P≤0.05). CONCLUSIONS: The undergraduates were very optimistic about the future of REPs, stem cell banking, and tissue engineering. Although seniors demonstrated less enthusiasm towards REPs than the freshman, most students are willing to recommend these treatments to their patients.
Asunto(s)
Endodoncia , Endodoncia Regenerativa , Actitud , Conocimientos, Actitudes y Práctica en Salud , Humanos , Estudiantes , Encuestas y Cuestionarios , Ingeniería de TejidosRESUMEN
The incorporation of antimicrobial agents in restorative dental composites has the potential to slow the development of carious lesions. OBJECTIVE: The objectives of the present study were to develop experimental composite resins with chitosan or chitosan loaded with dibasic calcium phosphate anhydrous (DCPA) particles and to demonstrate their antimicrobial potential without loss of mechanical properties or biocompatibility. METHODS: Chitosan and chitosan/DCPA particles were synthetized by the electrospray method. Experimental composites were formulated by adding 0, 0.5, or 1.0 wt% particles into a resin matrix along with 60 wt% barium glass. The degree of conversion and mechanical properties were measured after 1 and 90 days of aging in water after photoactivation. Cytotoxicity and genotoxicity were evaluated using fibroblasts from dental pulp in conditioned medium. The antimicrobial activity against Streptococcus mutans was assessed by crystal violet biofilm assay. RESULTS: The experimental restorative composites were not found to be cytotoxic or genotoxic, with cell viability of 93.1 ± 8.0% (p = 0.328) and 3.0 ± 0.8% micronucleus per group (p = 0.1078), respectively. The antimicrobial results showed that all composites with approximately 20% less biofilm (p < 0.001) relative to the control. No chitosan release was detected from the composites, suggesting direct contact of the bacteria with exposed chitosan particles on the surface was responsible for the observed antimicrobial effect. The addition of the chitosan and chitosan/DCPA submicrometer (<250 nm average diameter) particles to restorative composites did not change the degree of conversion, flexural strength, elastic modulus and fracture toughness compared to the control group after 90 days aging in water. SIGNIFICANCE: It can be concluded that the addition of chitosan or chitosan/DCPA particles in the restorative composites induced antimicrobial activity without compromising the mechanical properties or biocompatibility of the composites.
Asunto(s)
Quitosano , Fosfatos de Calcio , Resinas Compuestas , Materiales Dentales , Resistencia Flexional , Ensayo de Materiales , Docilidad , Streptococcus mutans , Propiedades de SuperficieRESUMEN
STATEMENT OF PROBLEM: Overdentures can improve the quality of life of elderly patients compared with conventional complete dentures. Different attachment systems can be used to retain these prostheses, but which system results in better function, mechanical performance, and patient comfort is unclear. PURPOSE: The purpose of this systematic review was to evaluate randomized clinical trials to compare overdentures supported by either bar and clip or ball and O-ring attachments for retention, masticatory efficiency, bone loss, and patient satisfaction. MATERIAL AND METHODS: A literature search was conducted in the PubMed and Web of Science databases. From 163 studies, 16 randomized clinical trials were included in this systematic review based on the inclusion and exclusion criteria. The risk of bias was evaluated according to the RevMan software Risk of Bias Table (RoB Table), and only the studies with a low or intermediate risk of bias were included in the review. RESULTS: From the limited number of studies, the attachment type did not affect the masticatory quality of the patients, bone loss marginal to the implants, or the degree of patient satisfaction. However, overdentures with the bar and clip attachment tended to have higher initial retention than the ball and O-ring system. CONCLUSIONS: Both the bar and clip and ball and O-ring attachment systems presented similar clinical performance regarding mechanical and functional properties and patient satisfaction.
Asunto(s)
Implantes Dentales , Prótesis de Recubrimiento , Anciano , Prótesis Dental de Soporte Implantado , Retención de Dentadura , Dentadura Completa , Humanos , Mandíbula , Calidad de VidaRESUMEN
In recent years, the demand for an increasingly aesthetic smile has been increasing in the clinical routine, due to this fact, countless patients look for treatments in order to improve the aesthetic appearance of your smile. It is denominated gingival smile, for individuals who present a gingival exposure with more than 3 mm during the act of smiling. Thus, among the possibilities of treatment for gingival smile, botulinum toxin has been widely used to promote a more harmonic smile. Thus, the objective of this work is to review the literature on the application of botulinum toxin in the treatment of gingival smile. The main advantages of using botulinum toxin as a therapeutic alternative for cases of gingival smile are the high tolerability of the patient, a low rate of complications, the ease of using the technique, and an almost immediate and natural effect. However, due to the disadvantage, it is possible to emphasize mainly in the short time of its effects, being necessary the maintenance. Thus, it is up to the dentist to perform a detailed anamnesis to select the most appropriate technique and promote the best treatment for the patient. (AU)
Nos últimos anos, a demanda por um sorriso cada vez mais estético vêm se tornando comum na rotina clínica. Devido a esse fato, inúmeros pacientes procuram por tratamentos com o intuito de melhorar a aparência estética do seu sorriso. Denomina-se sorriso gengival, indivíduos que apresentam uma exposição gengival com mais de 3 mm durante o ato de sorrir. Desse modo, dentre as possibilidades de tratamento para o sorriso gengival, a toxina botulínica tem sido muito utilizada para promover um sorriso mais harmônico do paciente de forma menos traumática. Assim, o objetivo deste trabalho é revisar a literatura sobre a aplicação da toxina botulínica no tratamento do sorriso gengival. As principais vantagens de se utilizar a toxina botulínica como alternativa terapêutica para os casos de sorriso gengival são a alta tolerância pelo paciente, baixo índice de complicações, facilidade de se empregar a técnica, efeito praticamente imediato e natural. Contudo, por desvantagem pode-se destacar principalmente a curto período de tempo de seus efeitos, sendo necessário a manutenção. Dessa forma, cabe ao cirurgião-dentista realizar uma anamnese minuciosa para selecionar a técnica mais adequada e promover o melhor tratamento para o paciente (AU)