Nanoporous Carbon Materials Derived from Zanthoxylum Bungeanum Peel and Seed for Electrochemical Supercapacitors.

In order to prepare biomass-derived carbon materials with high specific capacitance at a low activation temperature (≤700 °C), nanoporous carbon materials were prepared from zanthoxylum bungeanum peels and seeds via the pyrolysis and KOH-activation processes. The results show that the optimal activation temperatures are 700 °C and 600 °C for peels and seeds. Benefiting from the hierarchical pore structure (micropores, mesopores, and macropores), the abundant heteroatoms (N, S, and O) containing functional groups, and plentiful electrochemical active sites, the PAC-700 and SAC-600 derive the large capacities of ~211.0 and ~219.7 F g-1 at 1.0 A g-1 in 6 M KOH within the three-electrode configuration. Furthermore, the symmetrical supercapacitors display a high energy density of 22.9 and 22.4 Wh kg-1 at 7500 W kg-1 assembled with PAC-700 and SAC-600, along with exceptional capacitance retention of 99.1% and 93.4% over 10,000 cycles at 1.0 A g-1. More significantly, the contribution here will stimulate the extensive development of low-temperature activation processes and nanoporous carbon materials for electrochemical energy storage and beyond.

Deep learning-assisted detection and segmentation of intracranial hemorrhage in noncontrast computed tomography scans of acute stroke patients: a systematic review and meta-analysis.

BACKGROUND: Deep learning (DL)-assisted detection and segmentation of intracranial hemorrhage stroke in noncontrast computed tomography (NCCT) scans are well-established, but evidence on this topic is lacking. MATERIALS AND METHODS: PubMed and Embase databases were searched from their inception to November 2023 to identify related studies. The primary outcomes included sensitivity, specificity, and the Dice Similarity Coefficient (DSC); while the secondary outcomes were positive predictive value (PPV), negative predictive value (NPV), precision, area under the receiver operating characteristic curve (AUROC), processing time, and volume of bleeding. Random-effect model and bivariate model were used to pooled independent effect size and diagnostic meta-analysis data, respectively. RESULTS: A total of 36 original studies were included in this meta-analysis. Pooled results indicated that DL technologies have a comparable performance in intracranial hemorrhage detection and segmentation with high values of sensitivity (0.89, 95% CI: 0.88-0.90), specificity (0.91, 95% CI: 0.89-0.93), AUROC (0.94, 95% CI: 0.93-0.95), PPV (0.92, 95% CI: 0.91-0.93), NPV (0.94, 95% CI: 0.91-0.96), precision (0.83, 95% CI: 0.77-0.90), DSC (0.84, 95% CI: 0.82-0.87). There is no significant difference between manual labeling and DL technologies in hemorrhage quantification (MD 0.08, 95% CI: -5.45-5.60, P=0.98), but the latter takes less process time than manual labeling (WMD 2.26, 95% CI: 1.96-2.56, P=0.001). CONCLUSION: This systematic review has identified a range of DL algorithms that the performance was comparable to experienced clinicians in hemorrhage lesions identification, segmentation, and quantification but with greater efficiency and reduced cost. It is highly emphasized that multicenter randomized controlled clinical trials will be needed to validate the performance of these tools in the future, paving the way for fast and efficient decision-making during clinical procedure in patients with acute hemorrhagic stroke.

An individualized regional citrate anticoagulation protocol for hemodialysis: a real-world retrospective study.

OBJECTIVE: To evaluate the safety and effectiveness of an individualized regional citrate anticoagulation (RCA) protocol for hemodialysis. METHODS: In this single-center, retrospective study, blood coagulation in the extracorporeal circulation, adverse reactions, in vivo ionized calcium (iCa2+) concentrations, and the infusion dose of citrate during RCA in hemodialysis were observed in 98 patients from February 2021 to March 2022. RESULTS: A total of 98 patients underwent RCA during hemodialysis 362 times, and blood coagulation occurred in the extracorporeal circulation 29 times. Among the 29 cases of coagulation, most of the patients exhibited hypercoagulability, and among approximately 80% of the treatments, the deviation between the actual infusion rate of citrate in the extracorporeal circulation and the theoretical value was ± 10%. After hemodialysis, pH values and bicarbonate ion (HCO3-) levels were clearly improved, and online conductivity monitoring (OCM) values and blood coagulation scores in the extracorporeal circulation were identical to those measured in similar studies. CONCLUSION: An individualized RCA protocol for hemodialysis is safe, effective, simple, and inexpensive and can meet the needs of individualized treatment; therefore, its application is worthy of promotion.

Exploring clinical evaluation indicators for predicting coagulation in the extracorporeal circulation circuit in hemodialysis patients receiving individualized regional citrate anticoagulation-A single-center, retrospective clinical study.

BACKGROUND: Citrate anticoagulation is an important anticoagulation method in hemodialysis (HD) but cannot completely prevent the occurrence of coagulation in the extracorporeal circulation (ECC) circuit, and the clinical coagulation status can significantly affect the effect of citrate anticoagulation. In this study, the relationships between clinical coagulation status indicators and coagulation in the ECC circuit in HD patients receiving individualized citrate anticoagulant were studied to explore indicators that may predict coagulation in the ECC circuit. METHODS: This study was a single-center, retrospective clinical study, and clinical data and laboratory tests related to the coagulation status of HD patients receiving individualized regional citrate anticoagulation (RCA) were collected. The relationships between indicators commonly used in clinical practice to evaluate clinical coagulation status and coagulation in the ECC circuit were statistically analyzed to find indicators that can predict the occurrence of coagulation in the ECC circuit. RESULTS: The individualized RCA had a good anticoagulation effect, and the actual citrate infusion rate in nearly 80% of the patients was within ±10% of the theoretical infusion rate. The combined diseases or conditions that affect the coagulation status in vivo may increase the incidence of coagulation in the ECC circuit. The clinical D-dimer level is an independent risk factor that affects and can predict coagulation in the ECC circuit, with a cutoff value of 2.03 mg/L, sensitivity of 59%, and specificity of 78%. CONCLUSION: Individualized RCA can meet the needs of most HD treatments. Abnormal coagulation status in HD patients may increase the incidence of coagulation in the ECC circuit during individualized RCA for HD, and the D-dimer level can predict the occurrence of coagulation in the ECC circuit during this treatment.

Non-anticoagulant factors affecting coagulation in the extracorporeal circulation circuit and the development of an individualized regional citrate anticoagulation protocol for hemodialysis: A real-world retrospective study.

OBJECTIVE: To investigate non-anticoagulant factors that affect blood coagulation in the extracorporeal circulation (ECC) circuit of regional citrate anticoagulation (RCA) protocol for hemodialysis (HD). METHOD: The clinical characteristics of patients undergoing an individualized RCA protocol for HD between February 2021 and March 2022 were collected; Coagulation scores, pressures in various parts of the ECC circuit, the incidence of coagulation, and citrate concentrations in the ECC circuit during treatment were determined, and non-anticoagulant factors affecting coagulation in the ECC circuit were analyzed. RESULT: The lowest clotting rate was 2.8% in patients with arteriovenous fistula in various vascular access. Patients on Fresenius dialysis had a lower rate of clotting in the cardiopulmonary bypass line than patients on other brands of dialyzer. Low-throughput dialyzers are less likely to clot than high-throughput dialyzers. There are significant differences in the incidence of coagulation among different nurses during citrate anticoagulant hemodialysis. CONCLUSION: In the process of citrate anticoagulant hemodialysis, non-anticoagulant factors such as coagulation status, vascular access, dialyzer selection, and operator quality will affect the anticoagulant effect.

Treatment of atrazine-containing wastewater by algae-bacteria consortia: Signal transmission and metabolic mechanism.

Atrazine is a toxic endocrine disruptor. Biological treatment methods are considered to be effective. In the present study, a modified version of the algae-bacteria consortia (ABC) was established and a control was simultaneously set up to investigate the synergistic relationship between bacteria and algae and the mechanism by which atrazine is metabolized by those microorganisms. The total nitrogen (TN) removal efficiency of the ABC reached 89.24% and the atrazine concentration was reduced to below the level recommended by the Environment Protection Agency (EPA) regulatory standards within 25 days. The protein signal released from the extracellular polymeric substances (EPS) secreted by the microorganisms triggered the resistance mechanism of the algae, and the conversion of humic acid to fulvic acid and electron transfer constituted the synergistic mechanism between the bacteria and algae. The mechanism by which atrazine is metabolized by the ABC mainly consists of hydrogen bonding, H-pi interactions, and cation exchange with atzA for hydrolysis, followed by a reaction with atzC for decomposition to non-toxic cyanuric acid. Proteobacteria was the dominant phylum for bacterial community evolution under atrazine stress, and the analysis revealed that the removal of atrazine within the ABC was mainly dependent on the proportion of Proteobacteria and the expression of degradation genes (p < 0.01). EPS played a major role in the removal of atrazine within the single bacteria group (p < 0.01).

High-Durability Photothermal Slippery Surfaces for Droplet Manipulation Based on Ultraviolet Lithography.

Photothermal slippery surface has broad applications in many research fields for noncontacting, loss-free, and flexible droplet manipulation capability. In this work, with specific morphologic parameters and modified base materials doped by Fe3O4, a high-durability photothermal slippery surface (HD-PTSS) was proposed and implemented based on ultraviolet (UV) lithography to achieve repeatability of more than 600 cycles. The instantaneous response time and transport speed of HD-PTSS were related to near-infrared ray (NIR) powers and droplet volume. Meanwhile, the durability was closely related to the morphology of HD-PTSS, which impacts the recovering of a lubricant layer. The droplet manipulation mechanism of HD-PTSS was discussed in depth, and the Marangoni effect was found to be the key factor for the durability of HD-PTSS.

Flow Cytometry with Anti-Diffraction Light Sheet (ADLS) by Spatial Light Modulation.

Flow cytometry is a widespread and powerful technique whose resolution is determined by its capacity to accurately distinguish fluorescently positive populations from negative ones. However, most informative results are discarded while performing the measurements of conventional flow cytometry, e.g., the cell size, shape, morphology, and distribution or location of labeled exosomes within the unpurified biological samples. Herein, we propose a novel approach using an anti-diffraction light sheet with anisotroic feature to excite fluorescent tags. Constituted by an anti-diffraction Bessel-Gaussian beam array, the light sheet is 12 µm wide, 12 µm high, and has a thickness of ~0.8 µm. The intensity profile of the excited fluorescent signal can, therefore, reflect the size and allow samples in the range from O (100 nm) to 10 µm (e.g., blood cells) to be transported via hydrodynamic focusing in a microfluidic chip. The sampling rate is 500 kHz, which provides a capability of high throughput without sacrificing the spatial resolution. Consequently, the proposed anti-diffraction light sheet flow cytometry (ADLSFC) can obtain more informative results than the conventional methodologies, and is able to provide multiple characteristics (e.g., the size and distribution of fluorescent signal) helping to distinguish the target samples from the complex backgrounds.

SlRBP1 promotes translational efficiency via SleIF4A2 to maintain chloroplast function in tomato.

Many glycine-rich RNA-binding proteins (GR-RBPs) have critical functions in RNA processing and metabolism. Here, we describe a role for the tomato (Solanum lycopersicum) GR-RBP SlRBP1 in regulating mRNA translation. We found that SlRBP1 knockdown mutants (slrbp1) displayed reduced accumulation of total chlorophyll and impaired chloroplast ultrastructure. These phenotypes were accompanied by deregulation of the levels of numerous key transcripts associated with chloroplast functions in slrbp1. Furthermore, native RNA immunoprecipitation-sequencing (nRIP-seq) recovered 61 SlRBP1-associated RNAs, most of which are involved in photosynthesis. SlRBP1 binding to selected target RNAs was validated by nRIP-qPCR. Intriguingly, the accumulation of proteins encoded by SlRBP1-bound transcripts, but not the mRNAs themselves, was reduced in slrbp1 mutants. Polysome profiling followed by RT-qPCR assays indicated that the polysome occupancy of target RNAs was lower in slrbp1 plants than in wild-type. Furthermore, SlRBP1 interacted with the eukaryotic translation initiation factor SleIF4A2. Silencing of SlRBP1 significantly reduced SleIF4A2 binding to SlRBP1-target RNAs. Taking these observations together, we propose that SlRBP1 binds to and channels RNAs onto the SleIF4A2 translation initiation complex and promotes the translation of its target RNAs to regulate chloroplast functions.

The influence of cooperative action intention on object affordance: evidence from the perspective-taking ability of individuals.

In complex interactive scenarios, action understanding lies at the heart of social interactions. Nevertheless, the ability to understand action intention may differ among people. The current study distinguished two groups of participants with different social intention-understanding abilities (high and low) based on a perspective-taking task to investigate the influence of social intention on object affordance under conditions of individual and cooperative action intention. In the affordance perception experiment, participants were shown a video with the presenter reaching to grasp an object in different grips and asked to classify objects into kitchen or non-kitchen items by pressing the left- or right-hand button under the two intention conditions. The results showed that the object affordance effects were modulated by the participants' understanding of social intention in the interactive scenarios. Specifically, the object affordance effects were observed only in the high perspective-taking ability group under the condition of cooperative action intention. However, under the condition of individual action intention, object affordance effects were shown in both the high and low perspective-taking ability groups, and the difference between the two groups was not significant. This study suggests that processing of object affordance depends greatly on the contextual correspondence of perception and action and that the understanding of cooperative action intention can affect the activation of object affordance.

Aggregation of carboxyl-modified polystyrene nanoplastics in water with aluminum chloride: Structural characterization and theoretical calculation.

Nanoplastics (NPs) pollution of aquatic systems is becoming an emerging environmental issue due to their stable structure, high mobility, and easy interactions with ambient contaminants. Effective removal technologies are urgently needed to mitigate their toxic effects. In this study, we systematically investigated the removal effectiveness and mechanisms of a commonly detected nanoplastics, carboxyl-modified polystyrene (PS-COOH) via coagulation and sedimentation processes using aluminum chloride (AlCl3) as a coagulant. PS-COOH appeared as clearly defined and discrete spherical nanoparticles in water with a hydrodynamic diameter of 50 nm. The addition of 10 mg/L AlCl3 compressed and even destroyed the negatively charged PS-COOH surface layer, decreased the energy barrier, and efficiently removed 96.6% of 50 mg/L PS-COOH. The dominant removal mechanisms included electrostatic adsorption and intermolecular interactions. Increasing the pH from 3.5 to 8.5 sharply enhanced the PS-COOH removal, whereas significant loss was observed at pH 10.0. High temperature (23 °C) favored the removal of PS-COOH compared to lower temperature (4 °C). High PS-COOH removal efficiency was observed over the salinity range of 0 - 35‰. The presence of positively charged Al2O3 did not affect the PS-COOH removal, while negatively charged SiO2 reduced the PS-COOH removal from 96.6% to 93.2%. Moreover, the coagulation and sedimentation process efficiently removed 90.2% of 50 mg/L PS-COOH in real surface water even though it was rich in inorganic ions and total organic carbon. The fast and efficient capture of PS-COOH by AlCl3 via a simple coagulation and sedimentation process provides a new insight for the treatment of NPs from aqueous environment.

Field demonstration of on-site immobilization of arsenic and lead in soil using a ternary amending agent.

Soil contamination by heavy metals and metalloids has been a major environmental challenge. While various remediation technologies have been reported, field data on the remediation effectiveness have been limited. We tested a new remediation technology for on-site immobilization of As(III) and Pb(II) in a contaminated soil at an abandoned chemical plant site. A novel ternary amending agent consisting of Fe2O3, MnO2, and Mg(OH)2 (molar ratio = 1.0:5.5:5.5) was used to amend the soil on-site. Field monitoring data indicated that the amendment severed as a pH buffer and a long-term sequester for both As and Pb in the soil. At a dosage of 3 wt%, the acid-leachable As and Pb were lowered from 0.042-0.077 mg/L and 0.013-0.022 mg/L to 0.0062-0.0093 mg/L and 0.0030-0.0080 mg/L, respectively, after one day of the amendment, and to 0.0020-0.0050 mg/L and 0.0020-0.0054 mg/L after 240 days of aging. As(III) was oxidized to As(V) and subsequently immobilized via complexation and precipitation, whereas Pb(II) was sequestered via electrostatic attraction and chemical precipitation. The treatment cost was estimated at $31.5/m3. The results indicate that complex contaminants in soil can be effectively immobilized using combined amending agents that can interact with the target chemicals and induce synergistic immobilization reactions.

Development of Acute Myocardial Infarction Mortality and Readmission Models for Public Reporting on Hospital Performance in Canada.

BACKGROUND: Given changes in the care and outcomes of acute myocardial infarction (AMI) patients over the past several decades, we sought to develop prediction models that could be used to generate accurate risk-adjusted mortality and readmission outcomes for hospitals in current practice across Canada. METHODS: A Canadian national expert panel was convened to define appropriate AMI patients for reporting and develop prediction models. Preliminary candidate variable evaluation was conducted using Ontario patients hospitalized with a most responsible diagnosis of AMI from April 1, 2015 to March 31, 2018. National data from the Canadian Institute for Health Information was used to develop AMI prediction models. The main outcomes were 30-day all-cause in-hospital mortality and 30-day urgent all-cause readmission. Discrimination of these models (measured by c-statistics) was compared with that of existing Canadian Institute for Health Information models in the same study cohort. RESULTS: The AMI mortality model was assessed in 54,240 Ontario AMI patients and 153,523 AMI patients across Canada. We observed a 30-day in-hospital mortality rate of 6.3%, and a 30-day all-cause urgent readmission rate of 10.7% in Canada. The final Canadian AMI mortality model included 12 variables and had a c-statistic of 0.834. For readmission, the model had 13 variables and a c-statistic of 0.679. Discrimination of the new AMI models had higher c-statistics compared with existing models (c-statistic 0.814 for mortality; 0.673 for readmission). CONCLUSIONS: In this national collaboration, we developed mortality and readmission models that are suitable for profiling performance of hospitals treating AMI patients in Canada.

CONTEXTE: Compte tenu des changements apportés au cours des dernières décennies aux soins des patients ayant subi un infarctus aigu du myocarde (IAM) et aux issues d'un tel événement, nous avons voulu élaborer des modèles prédictifs pouvant servir à calculer de façon précise les résultats relatifs à la mortalité et aux réadmissions, ajustés selon les risques, pour les hôpitaux dans la pratique actuelle au Canada. MÉTHODOLOGIE: Un groupe national d'experts canadiens a été mis sur pied et a reçu le mandat de définir les critères appropriés applicables aux patients ayant subi un IAM aux fins de déclaration des cas et d'élaborer des modèles prédictifs. L'évaluation préliminaire des variables proposées a été effectuée à partir de patients hospitalisés en Ontario entre le 1er avril 2015 et le 31 mars 2018 chez lesquels l'IAM était le diagnostic principal à l'origine de l'hospitalisation. Les données à l'échelle nationale de l'Institut canadien d'information sur la santé (ICIS) ont été utilisées pour élaborer des modèles prédictifs d'IAM. Les deux principales issues évaluées étaient la mortalité hospitalière toutes causes confondues à 30 jours et la réadmission urgente toutes causes confondues à 30 jours. Le pouvoir discriminant de ces modèles (mesuré par la statistique C) a été comparé à celui des modèles existants de l'ICIS dans la même cohorte de l'étude. RÉSULTATS: Le modèle de mortalité par IAM a été évalué auprès de patients ayant subi un IAM, dont 54 240 en Ontario et 153 523 dans l'ensemble du Canada. Nous avons observé un taux de mortalité hospitalière à 30 jours de 6,3 % et un taux de réadmission urgente à 30 jours toutes causes confondues de 10,7 % au Canada. Le modèle canadien final de prédiction de la mortalité par IAM était constitué de 12 variables et avait une statistique C de 0,834. Pour la réadmission, le modèle comportait 13 variables et présentait une statistique C de 0,679. Le pouvoir discriminant des nouveaux modèles d'IAM présentait une statistique C supérieure à celle des modèles existants (statistique C de 0,814 pour la mortalité et de 0,673 pour la réadmission). CONCLUSIONS: Dans le cadre de cette collaboration nationale, nous avons élaboré des modèles prédictifs de la mortalité et de la réadmission hospitalière qui permettent d'établir un profil des résultats obtenus par les hôpitaux traitant des patients ayant subi un IAM au Canada.

Microplastics deteriorate the removal efficiency of antibiotic resistance genes during aerobic sludge digestion.

Sludge from wastewater treatment plants (WWTPs) is considered to be reservoirs of antibiotic resistance genes (ARGs), which can be efficiently removed by sludge treatment processes, e.g., aerobic sludge digestion. However, recent studies report microplastics, which also accumulate in sludge, may serve as carriers for ARGs. In the presence of microplastics, whether ARGs can still be efficiently destroyed by aerobic sludge digestion remains to be urgently investigated. In this study, the fate of ARGs during aerobic digestion was investigated with and without the addition of three prevalent categories of (i.e., polyvinyl chloride (PVC), polyethylene (PE), and polyethylene terephthalate (PET)). Nine ARGs and class 1 integron-integrase gene (intI1) that represents the horizontal transfer potential of ARGs were tested in this study. Compared with the control, the ARGs removal efficiency decreased by 129.6%, 137.0%, and 227.6% with the presence of PVC, PE, and PET, respectively, although a negligible difference was observed with their solids reduction efficiencies. The abundance of potential bacterial hosts of ARGs and intI1 increased in the reactors with the addition of microplastics, suggesting that microplastics potentially selectively enriched bacterial hosts and promoted the horizontal transfer of ARGs during aerobic sludge digestion. These may have contributed to the deteriorated ARGs removal efficiency. This study demonstrated that microplastics in sludge would decrease the ARGs removal efficiency in aerobic digestion process, potentially leading to more ARGs entering the local environment during sludge disposal or utilization.

Evaluation of three common alkaline agents for immobilization of multi-metals in a field-contaminated acidic soil.

We investigated three common alkaline agents (NaOH, CaO, and Mg(OH)2) for immobilization of four heavy metals (Pb, Zn, Cu, and Cd) in a field-contaminated soil and elucidated the underpinning principles. NaOH caused the highest pH spike in the soil, while CaO and Mg(OH)2 served as a longer-lasting source of OH-. Amending the soil with CaO or Mg(OH)2 at ≥0.1 mol as OH- (kg·soil)-1 for 24 h was able to immobilize all four metals, while NaOH failed. NaOH leached up to 3 times more organic carbon than CaO and Mg(OH)2, resulting in elevated leachability of the metals. Column elution tests showed that amendments by CaO and Mg(OH)2 lowered the leachable Pb2+, Zn2+, Cu2+, and Cd2+ by 52-54%, 71-75%, 69-73%, and 68%, respectively, after 1440 pore volumes of elution. Sequential extraction revealed that the soil amendments converted the exchangeable fraction of the metals to the much less available forms. XRD and FTIR analyses indicated that formation of metal oxide precipitates and complexation with soil organic matter were responsible for the metals immobilization. Taken together the chemical cost, technical effectiveness, and environmental impact, CaO is the most suitable alkaline agent for remediation of soil contaminated with heavy metals.

Realization of flexible and parallel laser direct writing by multifocal spot modulation.

In this investigation, we propose a strip segmentation phase (SSP) method for a spatial light modulator (SLM) to generate independent multifocal spots when the beam passes through a high numerical aperture (NA) lens. With the SSP method, multifocal spots can be generated with each spot independently, flexibly and uniformly distributed. The performance of the SSP method is first validated with numerical simulation. Then, by applying the modulation method with SLM and importing the beams into an inverted fluorescence microscopy system with a high-NA lens, the spot distribution and their shapes can be observed by fluorescent image. The fluorescent image exhibits high uniformity and high consistency with the aforementioned numerical simulations. Finally, we dynamically load a series of phase maps on SLM to realize continuous and independent spot movement in a multifocal array. By laser direct writing on photoresist, a complex NWU-shape structure can be realized flexibly with multi-task fabrication capability. The SSP method can significantly improve the efficiency and flexibility of laser direct writing. It is also compatible with most recent techniques, e.g., multiphoton absorption, stimulated emission depletion and photo-induced depolymerization etc., to realize parallel super-resolution imaging and fabrications.

Enhanced removal of zinc and cadmium from water using carboxymethyl cellulose-bridged chlorapatite nanoparticles.

Zinc (Zn2+) and cadmium (Cd2+) in water pose serious threats to human health and the environment. In search for a more effective treatment technology, we prepared a type of carboxymethyl cellulose (CMC) bridged chlorapatite (CMC-CAP) nanoparticles and tested the material for removal of Zn2+ and Cd2+ from water. CMC macromolecules were attached to CAP by bidentate bridging and hydrogen bonding, preserving the high adsorption capacity of CAP nanoparticles while allowing for easy gravity-separation of the nanoparticles. CMC-CAP showed rapid adsorption kinetics and 22.8% and 11.2% higher equilibrium uptake for Zn2+ and Cd2+, respectively, than pristine CAP. An extended dual-mode isotherm model, which takes into account both sorption and chemical precipitation, provided the best fits to the sorption isotherms, giving a maximum Langmuir sorption capacity of 141.1 mg g-1 for Zn2+ and 150.2 mg g-1 for Cd2+ by CMC-CAP. Na+ at up to 5 mM showed modest effects on the uptake of the heavy metals, while 2-5 mM of Ca2+ exerted notable inhibitive effects. Dissolved organic matter (up to 5 mg L-1 as TOC) inhibited the Zn2+ uptake by 16.5% but enhanced the Cd2+ removal by 8.6%. Material characterizations and surface binding analyses revealed that ion exchange, surface precipitation, and surface complexation were the removal mechanisms for the heavy metals. This study demonstrates stabilizer bridging may serve as a convenient strategy to facilitate water treatment uses of nanoparticles.

Occurrence and fate of linear alkylbenzenes and their potential as environmental molecular markers in highly urbanized river systems.

Rapid industrialization, urbanization, and population growth have led to the common occurrence of black-stinking urban rivers. Assessing regional anthropogenic influences is beneficial to develop effective remediation strategies. This study comprehensively investigated the occurrence and fate of linear alkylbenzenes (LABs) as molecular markers of anthropogenic influences in three media (filtered water, suspended particulate matter (SPM), and sediment) in a highly urbanized river (Baihaimian River) in Guangzhou, South China. The concentrations of LABs ranged from 41 to 215 ng/L in the dissolved phase, from 7122 to 46,640 ng/g dry weight in the SPM phase, and from 73 to 3650 ng/g dry weight in surface sediments (0-10 cm depth). The spatial distribution of LABs was probably affected by the surrounding environment, river flux, and sediment properties. No biotransformation of LABs in water samples and a slight biotransformation in sediments were observed. Significant correlations were found between total nitrogen, ammonia nitrogen, and LABs in river water, indicating the same domestic wastewater sources. The positive correlation between total organic carbon (TOC) and LABs in sediments suggested that TOC worked as the controlling factor for the redistribution of LABs and that local sewage discharge was the dominant TOC input. The total mass inventory of LABs in sediment in Baihaimian River was 21 kg. The total mass of LABs released into Baihaimian River was 183 kg per year, among them, 63% was discharged into the adjacent Liuxi River.

Simultaneous immobilization of multi-metals in a field contaminated acidic soil using carboxymethyl-cellulose-bridged nano-chlorapatite and calcium oxide.

We prepared and tested carboxymethyl-cellulose-bridged nano-chlorapatite (CMC-CAP) for simultaneous immobilization of Pb, Zn, Cu, and Cd in a field-contaminated acidic soil. Amending the field-contaminated soil using 0.5 wt.% CMC-CAP and 0.1 wt.% CaO was most effective in immobilizing the four metals, which decreased the leachabilities by 98.2%, 98.3%, 96.3%, and 96.2% for Pb, Zn, Cu, and Cd, respectively, after 1 day of treatment. The acid-leached metals fluctuated in the first 60 days, and then approached to steady state after 180 days, where the acid-leachable concentrations all met the regulation levels, and the immobilization was further consolidated when further aged for 365 days. Column elution tests showed that the soil amendment lowered the peak metal concentrations by > 92.5%, and the total eluted masses by >71.9%. Sequential extraction revealed that the soil amendment converted the exchangeable fractions to the much less available Fe-Mn oxides bound and residual forms, and thus, lowered the risk levels to "low risk" for all the metals. The immobilization of the metals was facilitated through formation of stable metal (chloro)phosphates, surface complexation, and/or ion exchange reactions. Combined CMC-CAP and CaO may serve as an effective formulation for simultaneous and long-term immobilization of multiple heavy metals in acidic soil.

Surfactant stealth effect of microplastics in traditional coagulation process observed via 3-D fluorescence imaging.

Microplastics (MPs) have aroused rising social concerns. Although amounts of surfactants exist in wastewater and are expected to alter the surface properties of MPs significantly as they are designed to be adsorbed by hydrophobic particles. However, rare works have been done on the influence of surfactants on the coagulation removal process of MPs which was thought to be an effective way to remove MPs together with other natural particles, such as clay. We used 3-D fluorescence imaging to track the coagulation removal process of polystyrene MPs. Our results indicate that nonionic surfactant, tween 20 in ppm scale, could inhibit the coagulation removal of polystyrene MPs significantly. Residue MPs in the effluent is proportional with the surfactant concentration and increases up to tens of times, which will lead to a dramatic increase in their potential environmental risks. Apparent size effect exists in the coagulation in which smaller MPs can escape from the coagulation removal more easily. Mechanism study suggests that the steric resistance of the hydrophilic flexible polyethylene glycol (PEG) layer formed by tween 20 adsorbed on MP surface inhibits clay deposition and thus hinders subsequent agglomeration and precipitation. A surfactant stealth effect, which is used in the design of nanomedicine to avoid the human immune recognition and clearance of nano-drugs from blood circulation, also exists in the coagulation removal process of MPs. Our finding not only proves the strong influence of surfactants on MPs but also will stimulate related studies on other latent surfactant effects of MPs.