Controllable synthesis and morphology-dependent light emission efficiency of Zn2GeO4 nanophosphors.

Zn2GeO4 is considered a very promising alternative to current luminescent semiconductors. Previous results suggest that its emitted wavelength may depend on different variables, such as particle size and morphology, among others. In this work, we have prepared pure and highly homogeneous Zn2GeO4 nanorods under hydrothermal synthesis conditions with a willemite-like structure. Their luminescent properties have been explored and their band gap is estimated, which are distinct from those of previously reported Zn2GeO4 bulk particles. Therefore, our results identify particle morphology as a crucial factor for maximizing and fine-tuning the luminescence of Zn2GeO4 nano-phosphors.

Quantitative, Spectro-kinetic Analysis of Oxygen in Electron-Beam Sensitive, Multimetallic Oxide Nanostructures.

The oxygen stoichiometry of hollandite, KxMnO2-δ, nanorods has been accurately determined from a quantitative analysis of scanning-transmission electron microscopy (STEM) X-Ray Energy Dispersive Spectroscopy (XEDS) experiments carried out in chrono-spectroscopy mode. A methodology combining 3D reconstructions of high-angle annular dark field electron tomography experiments, using compressed-sensing algorithms, and quantification through the so-called ζ-factors method of XEDS spectra recorded on a high-sensitivity detector has been devised to determine the time evolution of the oxygen content of nanostructures of electron-beam sensitive oxides. Kinetic modeling of O-stoichiometry data provided K0.13MnO1.98 as overall composition for nanorods of the hollandite. The quantitative agreement, within a 1% mol error, observed with results obtained by macroscopic techniques (temperature-programmed reduction and neutron diffraction) validate the proposed methodology for the quantitative analysis, at the nanoscale, of light elements, as it is the case of oxygen, in the presence of heavy ones (K, Mn) in the highly compromised case of nanostructured materials which are prone to electron-beam reduction. Moreover, quantitative comparison of oxygen evolution data measured at macroscopic and nanoscopic levels allowed us to rationalize beam damage effects in structural terms and clarify the exact nature of the different steps involved in the reduction of these oxides with hydrogen.

Heterostructured Cobalt Silicide Nanocrystals: Synthesis in Molten Salts, Ferromagnetism, and Electrocatalysis.

Nanoscale heterostructures of covalent intermetallics should give birth to a wide range of interface-driven physical and chemical properties. Such a level of design however remains unattainable for most of these compounds, due to the difficulty to reach a crystalline order of covalent bonds at the moderate temperatures required for colloidal chemistry. Herein, we design heterostructured cobalt silicide nanoparticles to trigger magnetic and catalytic properties in silicon-based materials. Our strategy consists in controlling the diffusion of cobalt atoms into silicon nanoparticles, by reacting these particles in molten salts. By adjusting the temperature, we tune the conversion of the initial silicon particles toward homogeneous CoSi nanoparticles and core-shell nanoparticles made of a CoSi shell and a silicon-rich core. The increased interface-to-volume ratio of the CoSi component in the core-shell particles yields distinct properties compared to the bulk and homogeneous nanoparticles. First, the core-shell particles exhibit increased ferromagnetism, despite the bulk diamagnetic properties of cobalt monosilicide. Second, the core-shell nanoparticles act as efficient precatalysts for alkaline water oxidation, where the nanostructure is converted in situ into a layered cobalt silicon oxide/(oxy)hydroxide with high and stable oxygen evolution reaction (OER) electrocatalytic activity. This work demonstrates a route to design heterostructured nanocrystals of covalent intermetallic compounds and shows that these new structures exhibit very rich, yet poorly explored, interface-based physical properties and reactivity.

Characterization of Tunneled Wide Band Gap Mixed Conductors: The Na2O-Ga2O3-TiO2 System.

This article focuses on the Na2O-Ga2O3-TiO2 system, which is barely explored in the study of transparent conductive oxides (TCOs). NaxGa4+xTin-4-xO2n-2 (n = 5, 6, and 7 and x ≈ 0.7-0.8) materials were characterized using neutron powder diffraction and aberration-corrected scanning transmission electron microscopy. Activation energy, as a function of different structures depending on tunnel size, shows a significant improvement in Na+ ion conduction from hexagonal to octagonal tunnels. New insights into the relationship between the crystal structure and the transport properties of TCOs, which are crucial for the design and development of new optoelectronic devices, are provided.

Tuning Magnetoconductivity in LaMnO3 NPs through Cationic Vacancy Control.

The inclusion of La-Mn vacancies in LaMnO3 nanoparticles leads to a noticeable change in conductivity behavior. The sample retains its overall insulator characteristic, with a typical thermal activation mechanism at high temperatures, but it presents high magnetoconductivity below 200 K. The activation energy decreases linearly with the square of the reduced magnetization and vanishes when the sample is magnetized at saturation. Therefore, it turns out that electron hopping between Mn3+ and Mn4+ largely contributes to the conductivity below the Curie temperature. The influence of the applied magnetic field on conductivity also supports the hypothesis of hopping contribution, and the electric behavior can be explained as being due to an increase in the hopping probability via spin alignment.

The Role of Transmission Electron Microscopy in the Early Development of Mesoporous Materials for Tissue Regeneration and Drug Delivery Applications.

For the last 20 years, silica-based mesoporous materials have provided a sound platform for the development of biomedical technology applied to tissue engineering and drug delivery. Their unique structural and textural characteristics, chiefly, the ordered distribution of homogeneous and tunable pores with high surface areas and large pore volume, and their excellent biocompatibility provide an excellent starting point for bone tissue regeneration on the mesoporous surface, and also to load species of interest inside the pores. Adequate control of the synthesis conditions and functionalization of the mesoporous surface are critical factors in the design of new systems that are suitable for use in specific medical applications. Simultaneously, the use of appropriate characterization techniques in the several stages of design and manufacture of mesoporous particles allows us to ascertain the textural, structural and compositional modifications induced during the synthesis, functionalization and post-in vitro assays processes. In this scenario, the present paper shows, through several examples, the role of transmission electron microscopy and associated spectroscopic techniques in the search for useful information in the early design stages of mesoporous systems, with application in the fields of tissue regeneration and drug delivery systems.

Atomic Resolution Electron Microscopy: A Key Tool for Understanding the Activity of Nano-Oxides for Biomedical Applications.

Transition metal oxides constitute one of the most fruitful sources of materials with continuously increasing potential applications prompted by the expectations derived from the reduction of the particle size. The recent advances in transmission electron microscopy, because of the development of lenses, have made it possible to reach atomic resolution, which can provide answers regarding the performance of the transition metal nano-oxides. This critical information is related not only to the ability to study their microstructural characteristics but also their local composition and the oxidation state of the transition metal. Exploring these features is a well-known task in nano-oxides for energy and electronic technologies, but they are not so commonly used for elucidating the activity of these oxides for biomedical applications. Nevertheless, the identification at the atomic level of a certain dopant or the unambiguous determination of the oxidation state of a transition metal in a nano-oxide can be important questions to be answered in a certain biomedical application. In this work, we provide several examples in transition metal nano-oxides to show how atomic-resolution electron microscopy can be a key tool for its understanding.

Evaluation of the Nanodomain Structure in In-Zn-O Transparent Conductors.

The optimization of novel transparent conductive oxides (TCOs) implies a better understanding of the role that the dopant plays on the optoelectronic properties of these materials. In this work, we perform a systematic study of the homologous series ZnkIn2Ok+3 (IZO) by characterizing the specific location of indium in the structure that leads to a nanodomain framework to release structural strain. Through a systematic study of different terms of the series, we have been able to observe the influence of the k value in the nano-structural features of this homologous series. The stabilization and visualization of the structural modulation as a function of k is discussed, even in the lowest term of the series (k = 3). The strain fields and atomic displacements in the wurtzite structure as a consequence of the introduction of In3+ are evaluated.

Exceptional Low-Temperature CO Oxidation over Noble-Metal-Free Iron-Doped Hollandites: An In-Depth Analysis of the Influence of the Defect Structure on Catalytic Performance.

A family of iron-doped manganese-related hollandites, K x Mn1-y Fe y O2-δ (0 ≤ y ≤ 0.15), with high performance in CO oxidation have been prepared. Among them, the most active catalyst, K0.11Mn0.876Fe0.123O1.80(OH)0.09, is able to oxidize more than 50% of CO at room temperature. Detailed compositional and structural characterization studies, using a wide battery of thermogravimetric, spectroscopic, and diffractometric techniques, both at macroscopic and microscopic levels, have provided essential information about this never-reported behavior, which relates to the oxidation state of manganese. Neutron diffraction studies evidence that the above compound stabilizes hydroxyl groups at the midpoints of the tunnel edges as in isostructural ß-FeOOH. The presence of oxygen and hydroxyl species at the anion sublattice and Mn3+, confirmed by electron energy loss spectroscopy, appears to play a key role in the catalytic activity of this doped hollandite oxide. The analysis of these detailed structural features has allowed us to point out the key role of both OH groups and Mn3+ content in these materials, which are able to effectively transform CO without involving any critical, noble metal in the catalyst formulation.

Unambiguous localization of titanium and iron cations in doped manganese hollandite nanowires.

New insights into the chemical and structural features of iron or titanium-doped KxMnO2 hollandites are reported. Neutron diffraction and atomically resolved transmission electron microscopy elucidate the localization of the dopant cations that could be one of the key factors governing the functional activity of these nanomaterials.

Biomimetic Synthesis of Sub-20 nm Covalent Organic Frameworks in Water.

Covalent organic frameworks (COFs) are commonly synthesized under harsh conditions yielding unprocessable powders. Control in their crystallization process and growth has been limited to studies conducted in hazardous organic solvents. Herein, we report a one-pot synthetic method that yields stable aqueous colloidal solutions of sub-20 nm crystalline imine-based COF particles at room temperature and ambient pressure. Additionally, through the combination of experimental and computational studies, we investigated the mechanisms and forces underlying the formation of such imine-based COF colloids in water. Further, we show that our method can be used to process the colloidal solution into 2D and 3D COF shapes as well as to generate a COF ink that can be directly printed onto surfaces. These findings should open new vistas in COF chemistry, enabling new application areas.

Complex structural ordering of the oxygen deficiency in La0.5Ca2.5Mn2O7-δ Ruddlesden-Popper phases.

Ruddlesden-Popper oxides, (AO)(ABO3)n, occupy a prominent place in the landscape of materials research because of their intriguing potential applications. Compositional modifications to the cation sublattices, A or B, have been explored in order to achieve enhanced functionalities. However, changes to the anionic sublattice have been much less explored. In this work, new oxygen-deficient manganese Ruddlesden-Popper-related phases, La0.5Ca2.5Mn2O6.5 and La0.5Ca2.5Mn2O6.25, have been synthesized by controlled reduction of the fully oxidized n = 2 term La0.5Ca2.5Mn2O7. A complete structural and compositional characterization, by means of neutron diffraction, electron diffraction and atomically resolved scanning transmission electron microscopy and electron energy-loss spectroscopy techniques, allows the proposition of a topotactic reduction pathway through preferential oxygen removal in the [MnO2] layers along [031] and [0{\bar 1}3] directions. The gradual decrease of the Mn oxidation state, accommodated by short-range ordering of anionic vacancies, reasonably explains the breaking of ferromagnetic interactions reinforcing the emergence of antiferromagnetic ones. Additional short-range order-disorder phenomena of La and Ca cations have been detected in the reduced La0.5Ca2.5Mn2O7-δ, as previously reported in the parent compound.

Synthesis and characterization of Ag2S and Ag2S/Ag2(S,Se) NIR nanocrystals.

Syntheses of metal sulfide nanocrystals (NCs) by heat-up routes in the presence of thiols yield NC arrangements difficult to further functionalize and transfer to aqueous media. By means of different NMR techniques, and exemplified by Ag2S NCs, a metal-organic polymer formed during the synthesis acting as a ligand has been identified to be responsible for such aggregation. In this work, a new synthetic hot-injection strategy is presented to synthesize Ag2S NCs which are easily ligand exchangeable in water. Furthermore, the hot-injection route allows an extra NC treatment with Se to produce Ag2S/Ag2(S,Se) NCs with improved optical properties with respect to the Ag2S cores, and better resistance to oxidation, as demonstrated by X-ray absorption experiments.

Structure and electrochromism of two-dimensional octahedral molecular sieve h'-WO3.

Octahedral molecular sieves (OMS) are built of transition metal-oxygen octahedra that delimit sub-nanoscale cavities. Compared to other microporous solids, OMS exhibit larger versatility in properties, provided by various redox states and magnetic behaviors of transition metals. Hence, OMS offer opportunities in electrochemical energy harnessing devices, including batteries, electrochemical capacitors and electrochromic systems, provided two conditions are met: fast exchange of ions in the micropores and stability upon exchange. Here we unveil a novel OMS hexagonal polymorph of tungsten oxide called h'-WO3, built of (WO6)6 tunnel cavities. h'-WO3 is prepared by a one-step soft chemistry aqueous route leading to the hydrogen bronze h'-H0.07WO3. Gentle heating results in h'-WO3 with framework retention. The material exhibits an unusual combination of 1-dimensional crystal structure and 2-dimensional nanostructure that enhances and fastens proton (de)insertion for stable electrochromic devices. This discovery paves the way to a new family of mixed valence functional materials with tunable behaviors.

Positive and negative regulation of carbon nanotube catalysts through encapsulation within macrocycles.

One of the most attractive applications of carbon nanomaterials is as catalysts, due to their extreme surface-to-volume ratio. The substitution of C with heteroatoms (typically B and N as p- and n-dopants) has been explored to enhance their catalytic activity. Here we show that encapsulation within weakly doping macrocycles can be used to modify the catalytic properties of the nanotubes towards the reduction of nitroarenes, either enhancing it (n-doping) or slowing it down (p-doping). This artificial regulation strategy presents a unique combination of features found in the natural regulation of enzymes: binding of the effectors (the macrocycles) is noncovalent, yet stable thanks to the mechanical link, and their effect is remote, but not allosteric, since it does not affect the structure of the active site. By careful design of the macrocycles' structure, we expect that this strategy will contribute to overcome the major hurdles in SWNT-based catalysts: activity, aggregation, and specificity.

Copper-containing mesoporous bioactive glass nanoparticles as multifunctional agent for bone regeneration.

The application of mesoporous bioactive glasses (MBGs) containing controllable amount of different ions, with the aim to impart antibacterial activity, as well as stimulation of osteogenesis and angiogenesis, is attracting an increasing interest. In this contribution, in order to endow nano-sized MBG with additional biological functions, the framework of a binary SiO2-CaO mesoporous glass was modified with different concentrations of copper ions (2 and 5%mol.), through a one-pot ultrasound-assisted sol-gel procedure. The Cu-containing MBG (2%mol.) showed high exposed surface area (550m2g-1), uniform mesoporous channels (2.6nm), remarkable in vitro bioactive behaviour and sustained release of Cu2+ ions. Cu-MBG nanoparticles and their ionic dissolution extracts exhibited antibacterial effect against three different bacteria strains, E. coli, S. aureus, S. epidermidis, and the ability to inhibit and disperse the biofilm produced by S. epidermidis. The obtained results suggest that the developed material, which combines in single multifunctional agent excellent bioactivity and antimicrobial ability, offers promising opportunities for the prevention of infectious diseases and the effective treatment of bone defects. STATEMENT OF SIGNIFICANCE: In order to endow mesoporous bioactive glass, characterized by excellent bioactive properties, with additional biological functions, Cu-doped mesoporous SiO2-CaO glass (Cu-MBG) in the form of nanoparticles was prepared by an ultra-sound assisted one pot synthesis. The analysis of the bacterial viability, using different bacterial strains, and the morphological observation of the biofilm produced by the Staphylococcus epidermidis, revealed the antimicrobial effectiveness of the Cu-MBG and the relative ionic extracts against both the bacterial growth and the biofilm formation/dispersion, providing a true alternative to traditional antibiotic systemic therapies. The proposed multifunctional agent represents a promising and versatile platform for bone and soft tissues regeneration.

Chlorine Insertion Promoting Iron Reduction in Ba-Fe Hexagonal Perovskites: Effect on the Structural and Magnetic Properties.

BaFeCl0.13(2)O2.48(2) has been synthesized and studied. A proper tuning of the synthetic route has been designed to stabilize this compound as a single phase. The thermal stability and evolution, along with the magnetic and structural properties are reported here. The crystal structure has been refined from neutron powder diffraction data, and it is of the type (hhchc)2-10H. It is stable up to a temperature of 900 °C, where the composition reads BaFeCl0.13(2)O2.34(2). The study by electron microscopy shows that the crystal structure suffers no changes in the whole BaFeCl0.13(1)O3-y (2.34 ≤ 3 - y ≤ 2.48) compositional range. Refinement of the magnetic structure shows that the Fe is antiferromagneticaly ordered, with the magnetic moment parallel to the ab plane of the hexagonal structure. At higher temperature, a nonreversible phase transition into a (hchc)-4H structure type takes place with overall composition BaFeCl0.13(1)O2.26(1). Microstructural characterization shows that, in some crystals, this phase intergrows with a seemingly cubic related phase. Differences between these two crystalline phases reside in the chlorine content, which keeps constant through the phase transition for the former and disappears for the latter.

SrMnO3 Thermochromic Behavior Governed by Size-Dependent Structural Distortions.

The influence of particle size in both the structure and thermochromic behavior of 4H-SrMnO3 related perovskite is described. Microsized SrMnO3 suffers a structural transition from hexagonal (P63/mmc) to orthorhombic (C2221) symmetry at temperature close to 340 K. The orthorhombic distortion is due to the tilting of the corner-sharing Mn2O9 units building the 4H structural type. When temperature decreases, the distortion becomes sharper reaching its maximal degree at ∼125 K. These structural changes promote the modification of the electronic structure of orthorhombic SrMnO3 phase originating the observed color change. nano-SrMnO3 adopts the ideal 4H hexagonal structure at room temperature, the orthorhombic distortion being only detected at temperature below 170 K. A decrease in the orthorhombic distortion degree, compared to that observed in the microsample, may be the reason why a color change is not observed at low temperature (77 K).

Experimental Evidence of the Origin of Nanophase Separation in Low Hole-Doped Colossal Magnetoresistant Manganites.

While being key to understanding their intriguing physical properties, the origin of nanophase separation in manganites and other strongly correlated materials is still unclear. Here, experimental evidence is offered for the origin of the controverted phase separation mechanism in the representative La1-xCaxMnO3 system. For low hole densities, direct evidence of Mn(4+) holes localization around Ca(2+) ions is experimentally provided by means of aberration-corrected scanning transmission electron microscopy combined with electron energy loss spectroscopy. These localized holes give rise to the segregated nanoclusters, within which double exchange hopping between Mn(3+) and Mn(4+) remains restricted, accounting for the insulating character of perovskites with low hole density. This localization is explained in terms of a simple model in which Mn(4+) holes are bound to substitutional divalent Ca(2+) ions.

Chemical analysis at atomic resolution of isolated extended defects in an oxygen-deficient, complex manganese perovskite.

A general approach to the structural and analytical characterization of complex bulk oxides that exploits the advantage of the atomic spatial resolution and the analytical capability of aberration-corrected microscopy is described. The combined use of imaging and spectroscopic techniques becomes necessary to the complete characterization of the oxygen-deficient colossal magnetoresistant La(0.56)Sr(0.44)MnO(2.5)-related perovskite. In this compound, the formation of isolated (La/Sr)O and MnO rock-salt-type planar defects are identified from atomically resolved High Angle Annular Dark Field (HAADF) images. The location of the oxygen atomic columns from Annular Bright Field (ABF) images indicates edge-sharing MnO6 octahedra in the MnO planes and the study performed by Electron Energy Loss Spectroscopy (EELS) reveals different Mn oxidation states derived from the corner- or edge-sharing MnO6 octahedra environment.