RESUMEN
Rapid detection of pathogens at the point-of-need is crucial for preventing the spread of human, animal and plant diseases which can have devastating consequences both on the lives and livelihood of billions of people. Colorimetric, lateral flow assays consisting of a nitrocellulose membrane, are the preferred format today for low-cost on-site detection of pathogens. This assay format has, however, historically suffered from poor analytical performance and is not compatible with digital technologies. In this work, we report the development of a new class of digital diagnostics platform for precision point-of-need testing. This new versatile platform consists of two important innovations: i) A wireless and batteryless, microcontroller-based, low-cost Near Field Communication (NFC)-enabled potentiostat that brings high performance electroanalytical techniques (cyclic voltammetry, chronoamperometry, square wave voltammetry) to the field. The NFC-potentiostat can be operated with a mobile app by minimally trained users; ii) A new approach for producing nitrocellulose membranes with integrated electrodes that facilitate high performance electrochemical detection at the point-of-need. We produced an integrated system housed in a 3D-printed phone case and demonstrated its use for the detection of Maize Mosaic Virus (MMV), a plant pathogen, as a proof-of-concept application.
Asunto(s)
Técnicas Biosensibles , Humanos , Colodión , ElectrodosRESUMEN
Traditional single-point measurements fail to capture dynamic chemical responses of plants, which are complex, nonequilibrium biological systems. We report TETRIS (time-resolved electrochemical technology for plant root environment in situ chemical sensing), a real-time chemical phenotyping system for continuously monitoring chemical signals in the often-neglected plant root environment. TETRIS consisted of low-cost, highly scalable screen-printed electrochemical sensors for monitoring concentrations of salt, pH, and H2O2 in the root environment of whole plants, where multiplexing allowed for parallel sensing operation. TETRIS was used to measure ion uptake in tomato, kale, and rice and detected differences between nutrient and heavy metal ion uptake. Modulation of ion uptake with ion channel blocker LaCl3 was monitored by TETRIS and machine learning used to predict ion uptake. TETRIS has the potential to overcome the urgent "bottleneck" in high-throughput screening in producing high-yielding plant varieties with improved resistance against stress.
Asunto(s)
Peróxido de Hidrógeno , Metales , Plantas , Aprendizaje Automático , Raíces de PlantasRESUMEN
Time is an often-neglected variable in biological research. Plants respond to biotic and abiotic stressors with a range of chemical signals, but as plants are non-equilibrium systems, single-point measurements often cannot provide sufficient temporal resolution to capture these time-dependent signals. In this article, we critically review the advances in continuous monitoring of chemical signals in living plants under stress. We discuss methods for sustained measurement of the most important chemical species, including ions, organic molecules, inorganic molecules and radicals. We examine analytical and modelling approaches currently used to identify and predict stress in plants. We also explore how the methods discussed can be used for applications beyond a research laboratory, in agricultural settings. Finally, we present the current challenges and future perspectives for the continuous monitoring of chemical signals in plants.
Asunto(s)
Agricultura , PlantasRESUMEN
Printed electrical gas sensors are a low-cost, lightweight, low-power, and potentially disposable alternative to gas sensors manufactured using conventional methods such as photolithography, etching, and chemical vapor deposition. The growing interest in Internet-of-Things, smart homes, wearable devices, and point-of-need sensors has been the main driver fueling the development of new classes of printed electrical gas sensors. In this Perspective, we provide an insight into the current research related to printed electrical gas sensors including materials, methods of fabrication, and applications in monitoring food quality, air quality, diagnosis of diseases, and detection of hazardous gases. We further describe the challenges and future opportunities for this emerging technology.
Asunto(s)
Contaminación del Aire , Dispositivos Electrónicos Vestibles , Gases/análisisRESUMEN
Wearable devices provide an alternative pathway to clinical diagnostics by exploiting various physical, chemical and biological sensors to mine physiological (biophysical and/or biochemical) information in real time (preferably, continuously) and in a non-invasive or minimally invasive manner. These sensors can be worn in the form of glasses, jewellery, face masks, wristwatches, fitness bands, tattoo-like devices, bandages or other patches, and textiles. Wearables such as smartwatches have already proved their capability for the early detection and monitoring of the progression and treatment of various diseases, such as COVID-19 and Parkinson disease, through biophysical signals. Next-generation wearable sensors that enable the multimodal and/or multiplexed measurement of physical parameters and biochemical markers in real time and continuously could be a transformative technology for diagnostics, allowing for high-resolution and time-resolved historical recording of the health status of an individual. In this Review, we examine the building blocks of such wearable sensors, including the substrate materials, sensing mechanisms, power modules and decision-making units, by reflecting on the recent developments in the materials, engineering and data science of these components. Finally, we synthesize current trends in the field to provide predictions for the future trajectory of wearable sensors.
RESUMEN
A bio-inspired continuous wearable respiration sensor modeled after the lateral line system of fish is reported which is used for detecting mechanical disturbances in the water. Despite the clinical importance of monitoring respiratory activity in humans and animals, continuous measurements of breathing patterns and rates are rarely performed in or outside of clinics. This is largely because conventional sensors are too inconvenient or expensive for wearable sensing for most individuals and animals. The bio-inspired air-silicone composite transducer (ASiT) is placed on the chest and measures respiratory activity by continuously measuring the force applied to an air channel embedded inside a silicone-based elastomeric material. The force applied on the surface of the transducer during breathing changes the air pressure inside the channel, which is measured using a commercial pressure sensor and mixed-signal wireless electronics. The transducer produced in this work are extensively characterized and tested with humans, dogs, and laboratory rats. The bio-inspired ASiT may enable the early detection of a range of disorders that result in altered patterns of respiration. The technology reported can also be combined with artificial intelligence and cloud computing to algorithmically detect illness in humans and animals remotely, reducing unnecessary visits to clinics.
Asunto(s)
Dispositivos Electrónicos Vestibles , Animales , Inteligencia Artificial , Perros , Humanos , Monitoreo Fisiológico , Siliconas , TransductoresRESUMEN
Accurate, reliable, and cost-effective immunosensors are clinically important for the early diagnosis and monitoring of progressive diseases, and multiplexed sensing is a promising strategy for the next generation of diagnostics. This strategy allows for the simultaneous detection and quantification of multiple biomarkers with significantly enhanced reproducibility and reliability, whilst requiring smaller sample volumes, fewer materials, and shorter average analysis time for individual biomarkers than individual tests. In this opinionated review, we compare different techniques for the development of multiplexed immunosensors. We review the state-of-the-art approaches in the field of multiplexed immunosensors using electrical, electrochemical, and optical methods. The barriers that prevent translating this sensing strategy into clinics are outlined together with the potential solutions. We also share our vision on how multiplexed immunosensors will continue their evolution in the coming years.
Asunto(s)
Técnicas Biosensibles , Técnicas Electroquímicas , Técnicas Electroquímicas/métodos , Inmunoensayo/métodos , Sistemas de Atención de Punto , Pruebas en el Punto de Atención , Reproducibilidad de los ResultadosRESUMEN
Readily deployable, low-cost point-of-care medical devices such as lateral flow assays (LFAs), microfluidic paper-based analytical devices (µPADs), and microfluidic thread-based analytical devices (µTADs) are urgently needed in resource-poor settings. Governed by the ASSURED criteria (affordable, sensitive, specific, user-friendly, rapid and robust, equipment-free, and deliverability) set by the World Health Organization, these reliable platforms can screen a myriad of chemical and biological analytes including viruses, bacteria, proteins, electrolytes, and narcotics. The Ebola epidemic in 2014 and the ongoing pandemic of SARS-CoV-2 have exemplified the ever-increasing importance of timely diagnostics to limit the spread of diseases. This review provides a comprehensive survey of LFAs, µPADs, and µTADs that can be deployed in resource-limited settings. The subsequent commercialization of these technologies will benefit the public health, especially in areas where access to healthcare is limited.
Asunto(s)
COVID-19 , Sistemas de Atención de Punto , Bioensayo , Humanos , Dispositivos Laboratorio en un Chip , SARS-CoV-2RESUMEN
Organic and printed electronics integration has the potential to revolutionize many technologies, including biomedical diagnostics. This work demonstrates the successful integration of multiple printed electronic functionalities into a single device capable of the measurement of hydrogen peroxide and total cholesterol. The single-use device employed printed electrochemical sensors for hydrogen peroxide electroreduction integrated with printed electrochromic display and battery. The system was driven by a conventional electronic circuit designed to illustrate the complete integration of silicon integrated circuits via pick and place or using organic electronic circuits. The device was capable of measuring 8 µL samples of both hydrogen peroxide (0-5 mM, 2.72 × 10-6 A·mM-1) and total cholesterol in serum from 0 to 9 mM (1.34 × 10-8 A·mM-1, r2 = 0.99, RSD < 10%, n = 3), and the result was output on a semiquantitative linear bar display. The device could operate for 10 min via a printed battery, and display the result for many hours or days. A mobile phone "app" was also capable of reading the test result and transmitting this to a remote health care provider. Such a technology could allow improved management of conditions such as hypercholesterolemia.
Asunto(s)
Tecnología Biomédica , Técnicas Electroquímicas , Electrónica , Impresión , Colesterol/sangre , Suministros de Energía Eléctrica , Electrodos , Humanos , Peróxido de Hidrógeno/análisisRESUMEN
Silver paste electrodes modified with lyotropic phases formed from dodecyl benzenesulphonic acid and KCl were used as the reductant in the determination of the hydrogen peroxide released from the enzymatic reaction of glucose oxidase with glucose and oxygen. The response of the modified electrode to hydrogen peroxide reduction (-0.1 V vs. Ag/AgCl) was shown to suffer from interference resulting from co-localization of enzyme and substrate at the electrode surface. This interference was eradicated by the introduction of a perm-selective membrane in the form of cellulose acetate. This further facilitated immobilization of the enzyme while allowing diffusion of the generated peroxide to the electrode. The resulting configuration was shown to be capable of the analytical determination of glucose.
Asunto(s)
Técnicas Biosensibles/métodos , Glucosa Oxidasa/metabolismo , Peróxido de Hidrógeno/análisis , Plata/química , Aspergillus niger/enzimología , Catálisis , Electroquímica , Enzimas Inmovilizadas/química , Enzimas Inmovilizadas/metabolismo , Glucosa/metabolismo , Glucosa Oxidasa/química , Peróxido de Hidrógeno/química , Peróxido de Hidrógeno/metabolismo , Oxidación-ReducciónRESUMEN
Advanced printing and deposition methodologies are revolutionising the way biological molecules are deposited and leading to changes in the mass production of biosensors and biodevices. This revolution is being delivered principally through adaptations of printing technologies to device fabrication, increasing throughputs, decreasing feature sizes and driving production costs downwards. This review looks at several of the most relevant deposition and patterning methodologies that are emerging, either for their high production yield, their ability to reach micro- and nano-dimensions, or both. We look at inkjet, screen, microcontact, gravure and flexographic printing as well as lithographies such as scanning probe, photo- and e-beam lithographies and laser printing. We also take a look at the emerging technique of plasma modification and assess the usefulness of these for the deposition of biomolecules and other materials associated with biodevice fabrication.