Correction: α-Fe2O3/TiO2 3D hierarchical nanostructures for enhanced photoelectrochemical water splitting.

Correction for 'α-Fe2O3/TiO2 3D hierarchical nanostructures for enhanced photoelectrochemical water splitting' by Hyungkyu Han et al., Nanoscale, 2017, 9, 134-142, https://doi.org/10.1039/C6NR06908H.

Identification, Synthesis, and Characterization of Potential Oxidative Impurities of Venetoclax: Application of Meisenheimer Rearrangement.

Venetoclax is a potent BCL-2 inhibitor that is used for the treatment of several blood cancers. During the oxidative stress degradation of venetoclax, we observed the formation of two potential impurities at levels of about 8-10%, which have similar molecular weights. The two impurities were isolated and identified as 4-(3-((1H-pyrrolo[2,3-b]pyridin-5-yl)oxy)-4-(((3-nitro-4-(((tetrahydro-2H-pyran-4-yl)methyl)amino)phenyl)sulfonyl)carbamoyl)phenyl)-1-((4'-chloro-5,5-dimethyl-3,4,5,6-tetrahydro-[1,1'-biphenyl]-2-yl)methyl)piperazine 1-oxide (venetoclax N-oxide, VNO) and 2-((1H-pyrrolo[2,3-b]pyridin-5-yl)oxy)-4-(4-((4'-chloro-5,5-dimethyl-3,4,5,6-tetrahydro-[1,1'-biphenyl]-2-yl)methoxy)piperazin-1-yl)-N-((3-nitro-4-(((tetrahydro-2H-pyran-4-yl)methyl)amino)phenyl)sulfonyl)benzamide (venetoclax hydroxylamine impurity, VHA). To confirm these two compounds, we have synthesized each impurity individually and analyzed it by high-performance liquid chromatography, mass spectrometry, 1H NMR, 13C NMR, and 2D NMR. VNO was synthesized by the oxidation of venetoclax using m-CPBA in dichloromethane to get the required N-oxide impurity. After the confirmation of the VNO impurity, the VNO impurity was heated with water at reflux in a sealed tube for 36 h to get the VHA impurity of about 6-8% after 36 h. After thorough analysis, it was confirmed that venetoclax N-oxide undergoes [1,2] Meisenheimer rearrangement to form the venetoclax hydroxylamine impurity. These two impurities may be relevant reference standards in manufacturing venetoclax Active Pharmaceutical Ingredient (API) (or) tablets.

Coconut coir-derived nanocellulose as an efficient adsorbent for removal of cationic dye safranin-O: a detailed mechanistic adsorption study.

Coconut (Cocos nucifera) coir is an abundant agricultural waste prevalent worldwide. Utilization of this waste has been carried out in this study by obtaining nanocellulose (NC) fibres for wastewater remediation purposes. Nanocellulose was obtained from coconut coir using bleaching and acid-alkali treatments followed by ultrasonication and lyophilization. The structural, compositional, surface and thermal properties of the synthesized material were identified using transmission electron microscopy (TEM), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), N2 adsorption/desorption, differential thermal (DT) and derivative thermogravimetric (DTG) analyses. These analyses confirmed the synthesized NC with enhanced thermal stability and porosity which was further used for adsorption process. After synthesis, NC was used for the removal of cationic dye safranin-O from water under ambient conditions through batch adsorption studies. The batch adsorption studies revealed that at 10 ppm of dye concentration, above 99% removal was achieved by 100 mg dosage of NC within 4.5 h at room temperature with qe (maximum adsorption capacity at equilibrium) value of around 83 mg g-1. The corresponding adsorption process fitted well with Langmuir isotherm and pseudo-second order kinetics. The primary mode of adsorption from the thermodynamic studies was found to be chemisorption. The adsorption process was achieved through response surface methodology (RSM) study which revealed that at optimized conditions of temperature 35 °C with a dose of 137.50 mg and contact time of 180 min, above 99% of dye (conc. 0.01 mg mL-1) was removed. In addition, the adsorbent can be recycled up to six cycles without any significant loss of its adsorption capacity. The present comprehensive study revealed that a greener eco-friendly synthesis of NC from waste material coconut coir was an effective nanoadsorbent for dye removal with high efficacy. This surely opens up opportunities to develop sustainable protocols for efficient environmental remediation.

Degradants of Tenofovir Disoproxil Fumarate Under Forced Yet Mild Thermal Stress: Isolation, Comprehensive Structural Elucidation, and Mechanism.

In addition to understanding the mechanism of action for a specific drug candidate, information regarding degradation pathways/products under various stress conditions is essential to know about their short- and long-term effects on health and environment. In line with that, tenofovir disoproxil fumarate (TDF, a co-crystal form of the prodrug tenofovir with fumaric acid), particularly used as an antiretroviral drug for treatment of HIV and hepatitis-B among others, is subjected to primarily thermal and other ICH-prescribed forced degradation conditions and their various degradation products are identified. Upon thermal degradation at 60°C for 8 h, five different degradants (namely DP-1 to DP-5) are isolated, and their structures are unambiguously confirmed using advanced analytical and spectroscopic techniques including ultra-performance liquid chromatography-mass spectrometry (UPLC-MS), high-resolution mass spectrometry (HRMS), state-of-the-art 1- and 2-dimensional nuclear magnetic resonance (1D and 2D NMR), and Fourier-transform infrared spectroscopic (FT-IR) techniques. Among fully characterized five degradants, two new degradants (DP-2 and DP-4) are identified which can potentially impact the stability of TDF via different pathways. Plausible mechanisms leading to all five thermal degradation products are also proposed including the generation of carcinogenic formaldehyde for some cases. The present systematic structural study especially combining MS and advanced NMR investigations unequivocally confirms the structures of the degradants and opens opportunities for connecting the various degradation pathways especially for the TDF-related pharmaceutical candidates.

Identification, Synthesis, and Characterization of Novel Baricitinib Impurities.

Baricitinib is a novel active pharmaceutical ingredient used in the treatment of rheumatoid arthritis, and it acts as an inhibitor of Janus kinase. During the synthesis of baricitinib, three unknown impurities were identified in several batches between 0.10 and 0.15% using high-performance liquid chromatography. The unknown compounds were isolated and identified as N-((3-(4-(7H-pyrrolo[2,3-d]pyrimidin-4-yl)-1H-pyrazol-1-yl)-5-oxotetrahydrofuran-3-yl)methyl)ethane sulfonamide (lactone impurity, BCL), 2-(3-(4-(7H-[4,7'-bipyrrolo[2,3-d]pyrimidin]-4'-yl)-1H-pyrazol-1-yl)-1-(ethylsulfonyl)azetidin-3-yl)acetonitrile (dimer impurity, BCD), and 2-(1-(ethylsulfonyl)-3-(4-(7-(hydroxymethyl)-7H-pyrrolo[2,3-d]pyrimidin-4-yl)-1H-pyrazol-1-yl)azetidin-3-yl) acetonitrile (hydroxymethyl, BHM). These compounds were synthesized and confirmed against the isolated samples. The structures of all the three impurities were confirmed by extensive analysis of 1H NMR, 13C NMR, and mass spectrometry. The lactone impurity formation was explained by a plausible mechanism. The outcome of this study was very useful for scientists working in process as well as in formulation development. To synthesize highly pure baricitinib drug substance, these impurities can be used as reference standards due to their potential importance.

Rapid and Scalable Wire-bar Strategy for Coating of TiO2 Thin-films: Effect of Post-Annealing Temperatures on Structures and Catalytic Dye-Degradation.

Titanium dioxide (TiO2) thin films were rapidly coated on Corning glass substrates from the precursor solution using the wire-bar technique at the room temperature and then post-annealed at 400, 500 and 600 °C for 1 h under atmospheric conditions. The structural, morphological, optical, wettability and photocatalytic properties of the films were studied. X-ray diffraction analysis confirmed the formation of an anatase TiO2 structure irrespective of the post-annealing temperatures. The optical transparency of the films in the visible range was measured to be > 70%. A water contact angle (WCA) of ~0° was observed for TiO2 thin-film, post-annealed at 400 °C and 500 °C. However, WCA of 40.3° was observed for post-annealed at 600 °C. The photocatalytic dye-degradation using post-annealed thin-film was investigated indicating a steady improvement in the dye-degradation percentage (from 24.3 to 29.4%) with the increase of post-annealing temperature. The demonstrated TiO2 thin-films deposited by wire-bar coating technique showed promises for the manufacturing of large-area cost-effective self-cleaning window glass.

Hematite Photoanode with Complex Nanoarchitecture Providing Tunable Gradient Doping and Low Onset Potential for Photoelectrochemical Water Splitting.

Over the past years, α-Fe2 O3 (hematite) has re-emerged as a promising photoanode material in photoelectrochemical (PEC) water splitting. In spite of considerable success in obtaining relatively high solar conversion efficiency, the main drawbacks hindering practical application of hematite are its intrinsically hampered charge transport and sluggish oxygen evolution reaction (OER) kinetics on the photoelectrode surface. In the present work, we report a strategy that synergistically addresses both of these critical limitations. Our approach is based on three key features that are applied simultaneously: i) a careful nanostructuring of the hematite photoanode in the form of nanorods, ii) doping of hematite by Sn4+ ions using a controlled gradient, and iii) surface decoration of hematite by a new class of layered double hydroxide (LDH) OER co-catalysts based on Zn-Co LDH. All three interconnected forms of functionalization result in an extraordinary cathodic shift of the photocurrent onset potential by more than 300 mV and a PEC performance that reaches a photocurrent density of 2.00 mA cm-2 at 1.50 V vs. the reversible hydrogen electrode.

Iron Oxide-Cobalt Nanocatalyst for O-tert-Boc Protection and O-Arylation of Phenols.

Efficient and general protocols for the O-tert-boc protection and O-arylation of phenols were developed in this paper using a recyclable magnetic Fe3O4-Co3O4 nanocatalyst (Nano-Fe-Co), which is easily accessible via simple wet impregnation techniques in aqueous mediums from inexpensive precursors. The results showed the catalysts were well characterized by XRD (X-ray Diffraction), ICP-AES (Inductive Coupled Plasma Atomic Emission Spectroscopy), TEM (Transmission Electron Microscopy), TOF-SIMS (Time-Of-Flight Secondary Ion Mass Spectrometry) and XPS (X-ray Photoelectron Spectroscopy). The O-tert-boc protection and O-arylation of phenols was accomplished in good to excellent yields (85–95%) and the catalyst was reusable and recyclable with no loss of catalytic activity for at least six repetitions.

An efficient copper-based magnetic nanocatalyst for the fixation of carbon dioxide at atmospheric pressure.

In the last few decades, the emission of carbon dioxide (CO2) in the environment has caused havoc across the globe. One of the most promising strategies for fixation of CO2 is the cycloaddition reaction between epoxides and CO2 to produce cyclic carbonates. For the first time, we have fabricated copper-based magnetic nanocatalyst and have applied for the CO2 fixation. The prepared catalyst was thoroughly characterized using various techniques including XRD, FT-IR, TEM, FE-SEM, XPS, VSM, ICP-OES and elemental mapping. The reactions proceeded at atmospheric pressure, relatively lower temperature, short reaction time, solvent- less and organic halide free reaction conditions. Additionally, the ease of recovery through an external magnet, reusability of the catalyst and excellent yields of the obtained cyclic carbonates make the present protocol practical and sustainable.

In Situ Generation of Pd-Pt Core-Shell Nanoparticles on Reduced Graphene Oxide (Pd@Pt/rGO) Using Microwaves: Applications in Dehalogenation Reactions and Reduction of Olefins.

Core-shell nanocatalysts are a distinctive class of nanomaterials with varied potential applications in view of their unique structure, composition-dependent physicochemical properties, and promising synergism among the individual components. A one-pot microwave (MW)-assisted approach is described to prepare the reduced graphene oxide (rGO)-supported Pd-Pt core-shell nanoparticles, (Pd@Pt/rGO); spherical core-shell nanomaterials (∼95 nm) with Pd core (∼80 nm) and 15 nm Pt shell were nicely distributed on the rGO matrix in view of the choice of reductant and reaction conditions. The well-characterized composite nanomaterials, endowed with synergism among its components and rGO support, served as catalysts in aromatic dehalogenation reactions and for the reduction of olefins with high yield (>98%), excellent selectivity (>98%) and recyclability (up to 5 times); both Pt/rGO and Pd/rGO and even their physical mixtures showed considerably lower conversions (20 and 57%) in dehalogenation of 3-bromoaniline. Similarly, in the reduction of styrene to ethylbenzene, Pd@Pt core-shell nanoparticles (without rGO support) possess considerably lower conversion (60%) compared to Pd@Pt/rGO. The mechanism of dehalogenation reactions with Pd@Pt/rGO catalyst is discussed with the explicit premise that rGO matrix facilitates the adsorption of the reducing agent, thus enhancing its local concentration and expediting the hydrazine decomposition rate. The versatility of the catalyst has been validated via diverse substrate scope for both reduction and dehalogenation reactions.

α-Fe2O3/TiO2 3D hierarchical nanostructures for enhanced photoelectrochemical water splitting.

We report the fabrication of 3D hierarchical hetero-nanostructures composed of thin α-Fe2O3 nanoflakes branched on TiO2 nanotubes. The novel α-Fe2O3/TiO2 hierarchical nanostructures, synthesized on FTO through a multi-step hydrothermal process, exhibit enhanced performances in photo-electrochemical water splitting and in the photocatalytic degradation of an organic dye, with respect to pure TiO2 nanotubes. An enhanced separation of photogenerated charge carriers is here proposed as the main factor for the observed photo-activities: electrons photogenerated in TiO2 are efficiently collected at FTO, while holes are transferred to the α-Fe2O3 nanobranches that serve as charge mediators to the electrolyte. The morphology of α-Fe2O3 that varies from ultrathin nanoflakes to nanorod/nanofiber structures depending on the Fe precursor concentration was shown to have a significant impact on the photo-induced activity of the α-Fe2O3/TiO2 composites. In particular, it is shown that for an optimized photo-electrochemical structure, a combination of critical factors should be achieved such as (i) TiO2 light absorption and photo-activation vs.α-Fe2O3-induced shadowing effect and (ii) the availability of free TiO2 surface vs.α-Fe2O3-coated surface. Finally, theoretical analysis, based on DFT calculations, confirmed the optical properties experimentally determined for the α-Fe2O3/TiO2 hierarchical nanostructures. We anticipate that this new multi-step hydrothermal process can be a blueprint for the design and development of other hierarchical heterogeneous metal oxide electrodes suitable for photo-electrochemical applications.

In Situ Growth and Characterization of Metal Oxide Nanoparticles within Polyelectrolyte Membranes.

This study describes a novel approach for the in situ synthesis of metal oxide-polyelectrolyte nanocomposites formed via impregnation of hydrated polyelectrolyte films with binary water/alcohol solutions of metal salts and consecutive reactions that convert metal cations into oxide nanoparticles embedded within the polymer matrix. The method is demonstrated drawing on the example of Nafion membranes and a variety of metal oxides with an emphasis placed on zinc oxide. The in situ formation of nanoparticles is controlled by changing the solvent composition and conditions of synthesis that for the first time allows one to tailor not only the size, but also the nanoparticle shape, giving a preference to growth of a particular crystal facet. The high-resolution TEM, SEM/EDX, UV-vis and XRD studies confirmed the homogeneous distribution of crystalline nanoparticles of circa 4 nm and their aggregates of 10-20 nm. The produced nanocomposite films are flexible, mechanically robust and have a potential to be employed in sensing, optoelectronics and catalysis.

Cu and Cu-Based Nanoparticles: Synthesis and Applications in Catalysis.

The applications of copper (Cu) and Cu-based nanoparticles, which are based on the earth-abundant and inexpensive copper metal, have generated a great deal of interest in recent years, especially in the field of catalysis. The possible modification of the chemical and physical properties of these nanoparticles using different synthetic strategies and conditions and/or via postsynthetic chemical treatments has been largely responsible for the rapid growth of interest in these nanomaterials and their applications in catalysis. In addition, the design and development of novel support and/or multimetallic systems (e.g., alloys, etc.) has also made significant contributions to the field. In this comprehensive review, we report different synthetic approaches to Cu and Cu-based nanoparticles (metallic copper, copper oxides, and hybrid copper nanostructures) and copper nanoparticles immobilized into or supported on various support materials (SiO2, magnetic support materials, etc.), along with their applications in catalysis. The synthesis part discusses numerous preparative protocols for Cu and Cu-based nanoparticles, whereas the application sections describe their utility as catalysts, including electrocatalysis, photocatalysis, and gas-phase catalysis. We believe this critical appraisal will provide necessary background information to further advance the applications of Cu-based nanostructured materials in catalysis.

Core-shell nanoparticles: synthesis and applications in catalysis and electrocatalysis.

Core-shell nanoparticles (CSNs) are a class of nanostructured materials that have recently received increased attention owing to their interesting properties and broad range of applications in catalysis, biology, materials chemistry and sensors. By rationally tuning the cores as well as the shells of such materials, a range of core-shell nanoparticles can be produced with tailorable properties that can play important roles in various catalytic processes and offer sustainable solutions to current energy problems. Various synthetic methods for preparing different classes of CSNs, including the Stöber method, solvothermal method, one-pot synthetic method involving surfactants, etc., are briefly mentioned here. The roles of various classes of CSNs are exemplified for both catalytic and electrocatalytic applications, including oxidation, reduction, coupling reactions, etc.

Covalent functionalization of monolayered transition metal dichalcogenides by phase engineering.

Chemical functionalization of low-dimensional materials such as nanotubes, nanowires and graphene leads to profound changes in their properties and is essential for solubilizing them in common solvents. Covalent attachment of functional groups is generally achieved at defect sites, which facilitate electron transfer. Here, we describe a simple and general method for covalent functionalization of two-dimensional transition metal dichalcogenide nanosheets (MoS2, WS2 and MoSe2), which does not rely on defect engineering. The functionalization reaction is instead facilitated by electron transfer between the electron-rich metallic 1T phase and an organohalide reactant, resulting in functional groups that are covalently attached to the chalcogen atoms of the transition metal dichalcogenide. The attachment of functional groups leads to dramatic changes in the optoelectronic properties of the material. For example, we show that it renders the metallic 1T phase semiconducting, and gives it strong and tunable photoluminescence and gate modulation in field-effect transistors.

Yeast cells-derived hollow core/shell heteroatom-doped carbon microparticles for sustainable electrocatalysis.

The use of renewable resources to make various synthetic materials is increasing in order to meet some of our sustainability challenges. Yeast is one of the most common household ingredients, which is cheap and easy to reproduce. Herein we report that yeast cells can be thermally transformed into hollow, core-shell heteroatom-doped carbon microparticles that can effectively electrocatalyze the oxygen reduction and hydrazine oxidation reactions, reactions that are highly pertinent to fuel cells or renewable energy applications. We also show that yeast cell walls, which can easily be separated from the cells, can produce carbon materials with electrocatalytic activity for both reactions, albeit with lower activity compared with the ones obtained from intact yeast cells. The results reveal that the intracellular components of the yeast cells such as proteins, phospholipids, DNAs and RNAs are indirectly responsible for the latter's higher electrocatalytic activity, by providing it with more heteroatom dopants. The synthetic method we report here can serve as a general route for the synthesis of (electro)catalysts using microorganisms as raw materials.

N-, O-, and S-tridoped nanoporous carbons as selective catalysts for oxygen reduction and alcohol oxidation reactions.

Replacing rare and expensive metal catalysts with inexpensive and earth-abundant ones is currently among the major goals of sustainable chemistry. Herein we report the synthesis of N-, O-, and S-tridoped, polypyrrole-derived nanoporous carbons (NOSCs) that can serve as metal-free, selective electrocatalysts and catalysts for oxygen reduction reaction (ORR) and alcohol oxidation reaction (AOR), respectively. The NOSCs are synthesized via polymerization of pyrrole using (NH4)2S2O8 as oxidant and colloidal silica nanoparticles as templates, followed by carbonization of the resulting S-containing polypyrrole/silica composite materials and then removal of the silica templates. The NOSCs exhibit good catalytic activity toward ORR with low onset potential and low Tafel slope, along with different electron-transfer numbers, or in other words, different ratios H2O/H2O2 as products, depending on the relative amount of colloidal silica used as templates. The NOSCs also effectively catalyze AOR at relatively low temperature, giving good conversions and high selectivity.

Dendritic silica nanomaterials (KCC-1) with fibrous pore structure possess high DNA adsorption capacity and effectively deliver genes in vitro.

The pore size and pore structure of nanoporous materials can affect the materials' physical properties, as well as potential applications in different areas, including catalysis, drug delivery, and biomolecular therapeutics. KCC-1, one of the newest members of silica nanomaterials, possesses fibrous, large pore, dendritic pore networks with wide pore entrances, large pore size distribution, spacious pore volume and large surface area--structural features that are conducive for adsorption and release of large guest molecules and biomacromolecules (e.g., proteins and DNAs). Here, we report the results of our comparative studies of adsorption of salmon DNA in a series of KCC-1-based nanomaterials that are functionalized with different organoamine groups on different parts of their surfaces (channel walls, external surfaces or both). For comparison the results of our studies of adsorption of salmon DNA in similarly functionalized, MCM-41 mesoporous silica nanomaterials with cylindrical pores, some of the most studied silica nanomaterials for drug/gene delivery, are also included. Our results indicate that, despite their relatively lower specific surface area, the KCC-1-based nanomaterials show high adsorption capacity for DNA than the corresponding MCM-41-based nanomaterials, most likely because of KCC-1's large pores, wide pore mouths, fibrous pore network, and thereby more accessible and amenable structure for DNA molecules to diffuse through. Conversely, the MCM-41-based nanomaterials adsorb much less DNA, presumably because their outer surfaces/cylindrical channel pore entrances can get blocked by the DNA molecules, making the inner parts of the materials inaccessible. Moreover, experiments involving fluorescent dye-tagged DNAs suggest that the amine-grafted KCC-1 materials are better suited for delivering the DNAs adsorbed on their surfaces into cellular environments than their MCM-41 counterparts. Finally, cellular toxicity tests show that the KCC-1-based materials are biocompatible. On the basis of these results, the fibrous and porous KCC-1-based nanomaterials can be said to be more suitable to carry, transport, and deliver DNAs and genes than cylindrical porous nanomaterials such as MCM-41.

Polypyrrole-derived nitrogen and oxygen co-doped mesoporous carbons as efficient metal-free electrocatalyst for hydrazine oxidation.

We demonstrate that polypyrrole-derived nitrogen and oxygen co-doped mesoporous carbons can serve as efficient, metal-free electrocatalysts for hydrazine oxidation reaction, with low overpotential and high current density. The materials' structures and the nature and type of their included dopants, which can be controlled by varying the synthetic conditions, can affect the electrocatalytic properties of the materials.

Cobalt-embedded nitrogen-rich carbon nanotubes efficiently catalyze hydrogen evolution reaction at all pH values.

Despite being technically possible, splitting water to generate hydrogen is still practically unfeasible due mainly to the lack of sustainable and efficient catalysts for the half reactions involved. Herein we report the synthesis of cobalt-embedded nitrogen-rich carbon nanotubes (NRCNTs) that 1) can efficiently electrocatalyze the hydrogen evolution reaction (HER) with activities close to that of Pt and 2) function well under acidic, neutral or basic media alike, allowing them to be coupled with the best available oxygen-evolving catalysts-which also play crucial roles in the overall water-splitting reaction. The materials are synthesized by a simple, easily scalable synthetic route involving thermal treatment of Co(2+) -embedded graphitic carbon nitride derived from inexpensive starting materials (dicyandiamide and CoCl2 ). The materials' efficient catalytic activity is mainly attributed to their nitrogen dopants and concomitant structural defects.