The Sustainable Bioactive Dyeing of Textiles: A Novel Strategy Using Bacterial Pigments, Natural Antibacterial Ingredients, and Deep Eutectic Solvents.

The textile industry stands as a prominent contributor to global environmental pollution, primarily attributable to its extensive reliance on synthetic dyes, hazardous components, and solvents throughout the textile dyeing and treatment processes. Consequently, the pursuit of sustainable textile solutions becomes imperative, aimed at replacing these environmentally unfriendly constituents with biobased and bioactive pigments, antibacterial agents, and, notably, natural solvents. Achieving this goal is a formidable yet indispensable challenge. In this study, the dyeing ability of the crude gel prodigiosin, produced by non-pathogenic bacteria Serratia plymuthica, was investigated on various multifiber fabrics at different conditions (temperature and pH) and by using salts and alternative mordants (the conventional Ferrous Sulphate (FeSO4) and a new bio-mordant, L-Cysteine (L-Cys)). Additionally, a novel gel-based Choline chloride (ChCl)/Lactic acid (LA) (1:2) deep eutectic solvent (DES) dyeing medium was studied to replace the organic solvents. Nylon fabrics dyed with 3.0% over the weight of the fiber (owf) L-Cys at pH = 8.3 had improved color fastness to washing, while the gel-based ChCl/LA (1:2) DES dyebath provided a better color fastness to light. Moreover, nylon fabrics under these conditions exhibited remarkable antimicrobial activity against Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa). In conclusion, the utilization of the crude gel-based prodigiosin pigment demonstrates a distinct advantage in dyeing textile materials, aligning with the growing consumer demand for more eco-friendly and sustainable products. Additionally, the application of the natural reducing agent L-Cys, previously untested as a bio-mordant, in conjunction with the use of gel-based DES as a dyeing medium, has showcased improved colorimetric and antibacterial properties when applied to nylon that is dyed with the crude gel prodigiosin pigment.

Upcycling Wool Waste into Keratin Gel-Based Nanofibers Using Deep Eutectic Solvents.

Millions of tons of wool waste are produced yearly by textile industries, which may become a serious environmental hazard in the near future. Given this concern, it is crucial to explore strategies to reduce the amount of wool waste generated worldwide and adopt more sustainable practices for dissolving and regenerating wool keratin (WK) from textile waste. Most traditional methods involve the use of expensive, toxic, harmful, and poorly biodegradable compounds. To overcome these limitations and facilitate the reuse of wool waste through a cascade valorization strategy, researchers have started testing the use of deep eutectic solvents (DES) as a more sustainable and eco-friendly alternative for WK dissolution and regeneration. In this study, the potential of two different DES mixtures, Choline chloride (ChCl): Urea and L-Cysteine (L-Cys): Lactic acid (LA), was explored for dissolving wool waste. Subsequently, the gels obtained based on DES-WK were blended with polyvinyl alcohol (PVA) in different ratios to produce nanofibers using the electrospinning technique. The PVA/L-Cys: LA DES-WK proved to be the most effective DES mixture for fabricating WK gel-based nanofibers. Furthermore, their antioxidant and antimicrobial abilities were evaluated, thus confirming their bioactivity. The results obtained revealed that this approach to valorizing textile waste offers a unique avenue for the development of sustainable functional materials with potential applications in various biomedical and industrial fields.

The Impacts of Plastic Waste from Personal Protective Equipment Used during the COVID-19 Pandemic.

The period from 2019 to 2022 has been defined by the COVID-19 pandemic, resulting in an unprecedented demand for and use of Personal Protective Equipment (PPE). However, the disposal of PPE without considering its environmental impact and proper waste management practices has become a growing concern. The increased demand for PPE during the pandemic and associated waste management practices have been analyzed. Additionally, the discussion around treating these residues and exploring more environmentally friendly alternatives, such as biodegradable or reusable PPE, is crucial. The extensive use of predominantly non-degradable plastics in PPE has led to their accumulation in landfills, with potential consequences for marine environments through the formation of microplastics. Therefore, this article seeks to establish a connection between these issues and the Sustainable Development Goals, emphasizing the importance of efficient management aligned with sustainable development objectives to address these emerging challenges and ensure a more sustainable future.

Electrospun wound dressings with antibacterial function: a critical review of plant extract and essential oil incorporation.

Among the many different types of wound dressings, nanofiber-based materials produced through electrospinning are claimed to be ideal because of their advantageous intrinsic properties and the feasibility of employing several strategies to load bioactive compounds into their structure. Bioactive compounds with antimicrobial properties have been incorporated into different wound dressings to promote healing as well as prevent and treat bacterial infections. Among these, natural products, such as medicinal plant extracts and essential oils (EOs), have proven particularly attractive thanks to their nontoxic nature, minor side effects, desirable bioactive properties, and favorable effects on the healing process. To this end, the present review provides an exhaustive and up-to-date revision of the most prominent medicinal plant extracts and EOs with antimicrobial properties that have been incorporated into nanofiber-based wound dressings. The most common methods used for incorporating bioactive compounds into electrospun nanofibers include: pre-electrospinning (blend, encapsulation, coaxial, and emulsion electrospinning), post-electrospinning (physical adsorption, chemical immobilization, and layer-by-layer assembly), and nanoparticle loading. Furthermore, a general overview of the benefits of EOs and medicinal plant extracts is presented, describing their intrinsic properties and biotechniques for their incorporation into wound dressings. Finally, the current challenges and safety issues that need to be adequately clarified and addressed are discussed.

Emulsion Electrospinning of PLLA/PVA/Chitosan with Hypericum perforatum L. as an Antibacterial Nanofibrous Wound Dressing.

Chronic wounds are one of the most severe health problems that affect millions of people worldwide. These types of injuries impair healing and lead to life-threatening complications. Therefore, suitable wound dressing materials are essential to prevent the risk of infection and to provide an excellent healing environment. The present research reports the development of an electrospun Poly (L-lactic acid) (PLLA)/Poly (vinyl alcohol) (PVA)/Chitosan (CS) wound dressing material, produced via emulsion electrospinning in a single step using homogeneous gel-like suspensions of two different and incompatible polymer solutions. The electrospun PLLA/PVA/CS fiber mats were loaded with two different amounts of Hypericum perforatum L. (HP) (2.5% and 5.0% owf). The results revealed that the produced electrospun PLLA/PVA/CS fiber mats displayed ideal properties as a wound dressing due to a total porosity, wettability, water vapor transmission rate (WVTR), and swelling properties similar to those reported for the extracellular matrix (ECM) of the skin, mainly when 2.5% owf HP was incorporated. Moreover, the electrospun PLLA/PVA/CS fiber mats containing HP were able to prevent the growth of gram-positive bacterium Staphylococcus aureus (S. aureus) without causing cytotoxicity to normal human dermal fibroblasts (NHDF). These findings suggest that these electrospun dressing mats are helpful for preventing wound infections as well as an appropriate support and microenvironment for wound healing.

Advances in the Production of Biomaterials through Kombucha Using Food Waste: Concepts, Challenges, and Potential.

In recent years, several researchers have focused their studies on the development of sustainable biomaterials using renewable sources, including the incorporation of living biological systems. One of the best biomaterials is bacterial cellulose (BC). There are several ways to produce BC, from using a pure strain to producing the fermented drink kombucha, which has a symbiotic culture of bacteria and yeasts (SCOBY). Studies have shown that the use of agricultural waste can be a low-cost and sustainable way to create BC. This article conducts a literature review to analyze issues related to the creation of BC through kombucha production. The databases used were ScienceDirect, Scopus, Web of Science, and SpringerLink. A total of 42 articles, dated from 2018 to 2022, were referenced to write this review. The findings contributed to the discussion of three topics: (1) The production of BC through food waste (including patents in addition to the scientific literature); (2) Areas of research, sectors, and products that use BC (including research that did not use the kombucha drink, but used food waste as a source of carbon and nitrogen); and (3) Production, sustainability, and circular economy: perspectives, challenges, and trends in the use of BC (including some advantages and disadvantages of BC production through the kombucha drink).

From Hemp Waste to Bioactive Nanofiber Composites: Deep Eutectic Solvents and Electrospinning in Upcycling Endeavors.

Natural fibers have attracted increasing interest as an alternative to produce environmentally friendly and sustainable materials. Particularly, hemp fibers have been widely used in various industrial applications due to their extremely unique properties. However, hemp can generate a large amount of agro-waste, and it results in an attractive source of biopolymers for the development of low-cost materials as an alternative to the raw materials and conventional petroleum-based plastics. In addition, deep eutectic solvents (DESs), a new type of truly green solvents, have been shown to remove gums, lignin, and other non-cellulosic components from hemp fibers. Reusing these components dissolved into the DESs to fabricate new materials directly by electrospinning is a very attractive but still unexplored endeavor. Thus, this innovative research to venture new upcycling pathways is focused on the fabrication of composite nanofibers by electrospinning of a gel-based blend of Poly(vinyl alcohol) (PVA) and hemp agro-waste (HW) dissolved into choline chloride (ChCl):Glycerol (1:2) and ChCl:Urea (1:2) DES mixtures. The results obtained revealed that the produced nanofibers displayed uniform appearance with diameters ranging from 257.7 ± 65.6 nm to 380.8 ± 134.0 nm. In addition, the mechanical properties of the electrospun composite nanofibers produced from the gel-based blends of HW dissolved in DESs and PVA (HW-DESs_PVA) were found to be superior, resulting in an enhanced tensile strength and Young's modulus. Furthermore, the incorporation of HW into the nanofibers was able to provide bioactive antioxidant and antibacterial properties. Overall, this study demonstrated a promising, more sustainable, and eco-friendly way to produce electrospun composite nanofibers using HW in a circular economy perspective.

Plastics and Microplastic in the Cosmetic Industry: Aggregating Sustainable Actions Aimed at Alignment and Interaction with UN Sustainable Development Goals.

Excessive use of petroleum derivatives in cosmetics, whether in compositions or packaging, predominating the use of plastics, parabens, microplastics and other polymers, has had negative environmental impacts. The cosmetics market has gained prominence in recent years and bioeconomy and circular economy policies are putting pressure on the market to use bio-based and biodegradable materials. In this context, the objective of this review article is to provide an overview of how the aggregation of sustainable actions in the cosmetic industry contributes to the fulfillment of the 2030 Agenda and how this can serve as a guide in building a more resilient and sustainable society. For that, the generation of residues during the production processes was examined and the environmental problems generated by the cosmetic industry were addressed. Then, the role of aggregating sustainable actions and innovations with regard to the achievement of the UN Sustainable Development Goals (SDGs) in the cosmetic industry were evaluated.

Design and Preparation of a Biobased Colorimetric pH Indicator from Cellulose and Pigments of Bacterial Origin, for Potential Application as Smart Food Packaging.

Nowadays, worldwide challenges such as global warming, pollution, unsustainable consumption patterns, and scarcity of natural resources are key drivers toward future-oriented bioeconomy strategies, which rely on renewable biobased resources, such as bacterial pigments and bacterial cellulose (BC), for materials production. Therefore, the purpose of this study was to functionalize bacterial cellulose with violacein, flexirubin-type pigment, and prodigiosin and test their suitability as pH indicators, due to the pigments' sensitivity to pH alterations. The screening of the most suitable conditions to obtain the BC-pigment indicators was achieved using a full factorial design, for a more sustainable functionalization process. Then, the pH response of functionalized BC to buffer solutions was assessed, with color changes at acidic pH (BC-violacein indicator) and at alkaline pH (BC-violacein, BC-prodigiosin, and BC-flexirubin-type pigment indicators). Moreover, the indicators also revealed sensitivity to acid and base vapors. Furthermore, leaching evaluation of the produced indicators showed higher suitability for aqueous foods. Additionally, color stability of the functionalized BC indicators was carried out, after light exposure and storage at 4 °C, to evaluate the indicators' capacity to maintain color/sensitivity. Thus, BC membranes functionalized with bacterial pigments have the potential to be further developed and used as pH indicators.

Characterization of Bioactive Colored Materials Produced from Bacterial Cellulose and Bacterial Pigments.

A Bacterial Cellulose (BC) film was developed and characterized as a potential functional bioactive material. BC films, obtained from a microbial consortium of bacteria and yeast species, were functionalized with the bacterial pigment prodigiosin, produced by Serratia plymuthica, and flexirubin-type pigment, from Chryseobacterium shigense, which exhibit a wide range of biological properties. BC was successfully functionalized at 15% over the weight of the fiber at 40 °C during 60 min, and a color strength of 1.00 ± 0.01 was obtained for BC_prodigiosin and 0.38 ± 0.02 for BC_flexirubin-type pigment. Moreover, the BC films showed moderate hydrophilic character following alkaline treatment, which was maintained after both pigments were incorporated. The porosity and mechanical performance of the functionalized BC samples also remained unaffected. Furthermore, the BC samples functionalized with prodigiosin presented antibacterial activity and were able to inhibit the growth of pathogenic bacteria Staphylococcus aureus and Pseudomonas aeruginosa, with inhibition rates of 97.89 ± 0.60% and 85.12 ± 0.17%, respectively, while BC samples functionalized with flexirubin-type pigment exhibited the highest antioxidant activity, at 38.96 ± 0.49%. This research provides an eco-friendly approach to grant BC film-based material with color and advantageous bioactive properties, which can find application in several fields, especially for medical purposes.

Sustainable Packaging Material Based on PCL Nanofibers and Lavandula luisieri Essential Oil, to Preserve Museological Textiles.

The connection with textiles is one of the oldest traditions in humanity, and in the historical scenario, textiles and clothing deal with material culture. Therefore, preservation is of the utmost importance to keep this important heritage. Packaging and protection of museological textiles is imperative due to the risks that these articles suffer, mainly concerning the attack of microorganisms that promote the acceleration of their degradation, and it is still necessary to create a proper packing material. In the present work we describe a bibliographic review about the museological scenario, focused on the packaging for preservation of textile articles, as well as the techniques usually used in preventive material conservation. Future perpsctives for the improvement in the conservation of museological textiles are also given. This research aims to produce a sustainable material based on polycaprolactone (PCL), with and without antimicrobial function by incorporating Lavandula luisieri essential oil (EO), in the form of a non-woven substrate for museological packaging. A comparison was made with the most frequently used materials, such as raw cotton and a non-woven polyester. The results demonstrated that both PCL and PCL + EO obtained a good characterization for museological application with good breaking strength and excellent whiteness index. In addition, PCL + EO showed a high bacterial reduction when compared with other protective materials frequently used in museums. Therefore, these findings emphasize the potential use of this material as an innovative protective antibacterial museological packaging solution, able to safeguard and preserve textile museum and clothing collections for longer and for future generations.

Antimicrobial Food Packaging Based on Prodigiosin-Incorporated Double-Layered Bacterial Cellulose and Chitosan Composites.

Nowadays, food packaging systems have shifted from a passive to an active role in which the incorporation of antimicrobial compounds into biopolymers can promote a sustainable way to reduce food spoilage and its environmental impact. Accordingly, composite materials based on oxidized-bacterial cellulose (BC) and poly(vinyl alcohol)-chitosan (PVA-CH) nanofibers were produced by needleless electrospinning and functionalized with the bacterial pigment prodigiosin (PG). Two strategies were explored, in the first approach PG was incorporated in the electrospun PVA-CH layer, and TEMPO-oxidized BC was the substrate for nanofibers deposition (BC/PVA-CH_PG composite). In the second approach, TEMPO-oxidized BC was functionalized with PG, and afterward, the PVA-CH layer was electrospun (BC_PG/PVA-CH composite). The double-layer composites obtained were characterized and the nanofibrous layers displayed smooth fibers with average diameters of 139.63 ± 65.52 nm and 140.17 ± 57.04 nm, with and without pigment incorporation, respectively. FTIR-ATR analysis confirmed BC oxidation and revealed increased intensity at specific wavelengths, after pigment incorporation. Moreover, the moderate hydrophilic behavior, as well as the high porosity exhibited by each layer, remained mostly unaffected after PG incorporation. The composites' mechanical performance and the water vapor transmission rate (WVTR) evaluation indicated the suitability of the materials for certain food packaging solutions, especially for fresh products. Additionally, the red color provided by the bacterial pigment PG on the external surface of a food packaging material is also a desirable effect, to attract the consumers' attention, creating a multifunctional material. Furthermore, the antimicrobial activity was evaluated and, PVA-CH_PG, and BC_PG layers exhibited the highest antimicrobial activity against Staphylococcus aureus and Pseudomonas aeruginosa. Thus, the fabricated composites can be considered for application in active food packaging, owing to PG antimicrobial potential, to prevent foodborne pathogens (with PG incorporated into the inner layer of the food packaging material, BC/PVA-CH_PG composite), but also to prevent external contamination, by tackling the exterior of food packaging materials (with PG added to the outer layer, BC_PG/PVA-CH composite).

Chelidoniummajus L. Incorporated Emulsion Electrospun PCL/PVA_PEC Nanofibrous Meshes for Antibacterial Wound Dressing Applications.

Presently, there are many different types of wound dressings available on the market. Nonetheless, there is still a great interest to improve the performance and efficiency of these materials. Concerning that, new dressing materials containing natural products, such as medicinal plants that protect the wound from infections but also enhance skin regeneration have been or are being developed. Herein, we used for the first time a needleless emulsion electrospinning technique for incorporating Chelidoniummajus L. (C. majus), a medicinal plant widely known for its traditional therapeutic properties, in Polycaprolactone (PCL)/Polyvinyl Alcohol (PVA)_Pectin (PEC) nanofibrous meshes. Moreover, the potential use of these electrospun nanofibers as a carrier for C. majus was also explored. The results obtained revealed that the produced PCL/PVA_PEC nanofibrous meshes containing C. majus extract displayed morphological characteristics similar to the natural extracellular matrix of the skin (ECM). Furthermore, the produced meshes showed beneficial properties to support the healing process. Additionally, the C. majus-loaded PCL/PVA_PEC nanofibrous meshes inhibited Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa) growth, reaching a 3.82 Log reduction, and showed to be useful for controlled release, without causing any cytotoxic effect on the normal human dermal fibroblasts (NHDF) cells. Hence, these findings suggest the promising suitability of this novel wound dressing material for prevention and treatment of bacterial wound infections.

Designing New Antibacterial Wound Dressings: Development of a Dual Layer Cotton Material Coated with Poly(Vinyl Alcohol)_Chitosan Nanofibers Incorporating Agrimonia eupatoria L. Extract.

Wounds display particular vulnerability to microbial invasion and infections by pathogenic bacteria. Therefore, to reduce the risk of wound infections, researchers have expended considerable energy on developing advanced therapeutic dressings, such as electrospun membranes containing antimicrobial agents. Among the most used antimicrobial agents, medicinal plant extracts demonstrate considerable potential for clinical use, due primarily to their efficacy allied to relatively low incidence of adverse side-effects. In this context, the present work aimed to develop a unique dual-layer composite material with enhanced antibacterial activity derived from a coating layer of Poly(vinyl alcohol) (PVA) and Chitosan (CS) containing Agrimonia eupatoria L. (AG). This novel material has properties that facilitate it being electrospun above a conventional cotton gauze bandage pre-treated with 2,2,6,6-tetramethylpiperidinyl-1-oxy free radical (TEMPO). The produced dual-layer composite material demonstrated features attractive in production of wound dressings, specifically, wettability, porosity, and swelling capacity. Moreover, antibacterial assays showed that AG-incorporated into PVA_CS's coating layer could effectively inhibit Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa) growth. Equally important, the cytotoxic profile of the dual-layer material in normal human dermal fibroblast (NHDF) cells demonstrated biocompatibility. In summary, these data provide initial confidence that the TEMPO-oxidized cotton/PVA_CS dressing material containing AG extract demonstrates adequate mechanical attributes for use as a wound dressing and represents a promising approach to prevention of bacterial wound contamination.

Preparation and Characterization of Electrospun Double-layered Nanocomposites Membranes as a Carrier for Centella asiatica (L.).

A wide range of naturally derived and synthetic biodegradable and biocompatible polymers are today regarded as promising materials for improving skin regeneration. Alongside this, these materials have been explored in conjunction with different types of antimicrobial and bioactive agents, especially natural-derived compounds, to enhance their biological properties. Herein, a double-layered nanocomposite dressing membrane was fabricated with two distinct layers. A bottom layer from Chitosan-Sodium tripolyphosphate (CS-TPP) and Poly(vinyl alcohol) (PVA) containing Centella asiatica (L.) (CA) was electrospun directly over a Polycaprolactone (PCL) layer to improve the biologic performance of the electrospun nanofibers. In turn, the PCL layer was designed to provide mechanical support to the damaged tissue. The results revealed that the produced double-layered nanocomposite membrane closely resembles the mechanical, porosity, and wettability features required for skin tissue engineering. On the other hand, the in vitro drug release profile of the PCL/PVA_CS-TPP containing CA exhibited a controlled release for 10 days. Moreover, the PVA_CS-TPP_CA's bottom layer displayed the highest antibacterial activity against Staphylococcus aureus (S. aureus) (99.96 ± 6.04%) and Pseudomonas aeruginosa (P. aeruginosa) (99.94 ± 0.67%), which is responsible for avoiding bacterial penetration while endowing bioactive properties. Finally, the 3-(4,5-Dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay showed that this nanocomposite membrane was not cytotoxic for normal human dermal fibroblasts (NHDF) cells. Therefore, these findings suggest the potential use of the double-layered PCL/PVA_CS-TPP_CA as an efficient bionanocomposite dressing material.

Immobilization of bacteriophage in wound-dressing nanostructure.

Opportunistic bacteria that cause life-threatening infections are still a central problem associated with a healthcare setting. Bacteriophage capsid immobilization on nanostructured polymers maximizes its tail exposure and looks promising in applications toward skin-infections as alternative to antibiotics standardly used. The main goal of this work was to investigate the covalent immobilization of vB_Pae_Kakheti25 bacteriophage capsid on polycaprolactone (PCL) nanofibers (non-woven textile), as a potential effective antimicrobial, laundry resistant and non-toxic dressing for biomedical use. Surface analyses showed that the immobilization of vB_Pae_Kakheti25 bacteriophage capsid on PCL nanofibres oriented bacteriophage tails to interact with bacteria. Furthermore, antimicrobial assays showed a very effective 6 log bacterial reduction, which was equivalent to 99.9999%, after immediate and 2 hours of contact, even following 25 washing cycles (due to covalent bond). The activity of PCL-vB_Pae_Kakheti25 against P. aeruginosa was immediate and its reduction was complete.

Amino Acid-Based Material for the Complementary Therapy of Decubitus Ulcers.

Chronic wounds, pressure sores, lesions, and infections of microbial origin in bedridden, paralyzed, or malnutrition patients remain the object of study of many researchers. A variety of factors behind the development of these disorders are related to the patient's immune system, making it unable to respond effectively to the treatment of the wound. These factors can be properly controlled, giving particular importance to the ethiology and stage of the wound, as well as the time periods corresponding to the replacement of the dressings. The present research reports a novel foam/soft material, L-Cys-g-PCL, with an application for decubitus/pressure ulcers, especially for wounds with a difficult healing process due to infections and constant oxidation of the soft tissues. During this work, the interactions between S. aureus and L-Cys-g-PCL foam were studied under conditions that simulate decubitus ulcers; namely, pH and exudate. The effects of duration of grafting (1 or 8 h) and pH (7.0 and 8.9) on wettability, surface energy, swelling, and porosity were also evaluated. Results showed an effective microbicidal activity exhibiting an inhibition ratio of 99.73% against S. aureus. This new L-Cys-g-PCL soft material showed saftey to contact skin, ability to be shaped to fill in sunken holes (craters) - pressure ulcers stage III - and to act as a smart material responsive to pH, which can be tailored to develop better swelling properties at alkaline pH where exudates are normally higher, so as to address exudate self-cleaning and prevention of desiccation..

Biofunctionalization of cellulosic fibres with L-cysteine: assessment of antibacterial properties and mechanism of action against Staphylococcus aureus and Klebsiella pneumoniae.

The main purpose of this work is to obtain a cotton-based textile material functionalized with L-cysteine (L-cys) to achieve an antimicrobial effect with potential application in biomedical, geriatric or pediatric textiles. The binding capacity of L-cys to cotton fibres was assessed through different functionalization strategies--surface activation and exhaustion processes. A subsequent analysis of the possible antibacterial action against Staphylococcus aureus and Klebsiella pneumoniae was performed according with the Japanese International standard (JISL, 2008). To determine the mechanism of action of L-cys on the selected strains, flow cytometry was used. The results revealed that the exhaustion process was performed with success to confer bioactivity to the treated fabric, as assessed by an effective antibacterial effect against both Gram-positive and Gram-negative bacteria, and successfully linkage of L-cys was observed via FTIR with a durable effect demonstrated after the washing tests (fastness to washing). It was also observed that L-cys exerts a bacteriostatic effect against both bacterial strains, since there were alterations in the metabolic activity of the microorganisms after the application of the bioactive textile which was shown by the CTC (cyanoditolyl tetrazolium chloride) staining used in flow cytometry. This study shows a new and successful biotechnological process to develop antibacterial textiles through the functionalization of cotton fibres with L-cys which presents a broad range of applications in healthcare, since L-cys is a natural antibacterial compound, non-toxic and affects pathogenic bacteria related to hospital infections.