RESUMEN
Protein-based drugs are becoming increasingly important, but there are challenges associated with their formulation (for example, formulating stable inhalable aerosols while maintaining the proper long-term stability of the protein). Determining the morphology of multicomponent, protein-based drug formulations is particularly challenging. Here, we use dynamic nuclear polarization (DNP) solid-state NMR spectroscopy to determine the hierarchy of components within spray-dried particles containing protein, trehalose, leucine, and trileucine. DNP NMR was applied to these formulations to assess the localization of the components within the particles. We found a consistent scheme, where trehalose and the protein are co-located within the same phase in the core of the particles and leucine and trileucine are distributed in separate phases at the surface of the particles. The description of the hierarchy of the organic components determined by DNP NMR enables the rationalization of the performance of the formulation.
Asunto(s)
Excipientes , Trehalosa , Leucina/química , Trehalosa/química , Excipientes/química , Aerosoles/química , Espectroscopía de Resonancia Magnética , Polvos/química , Administración por Inhalación , Tamaño de la PartículaRESUMEN
RNA therapies have recently taken a giant leap forward with the approval of Onpattro™, a siRNA therapy delivered using a lipid nanoparticle (LNP), and the LNP-enabled mRNA vaccines against COVID-19, which are the first mRNA drugs to reach the marketplace. The latter medicines have illustrated that stability is a significant challenge in the distribution of RNA drugs using non-viral delivery systems, particularly in areas without cold chain storage. Here, we describe a proof-of-concept study on the engineering of an LNP mRNA formulation suitable for spray drying. This process produced a dry powder formulation that maintained stability and preserved mRNA functionality with increased performance compared to liquid formulations stored two weeks at 4 °C. Intratracheal delivery of spray dried LNPs loaded with eGFP mRNA to rats resulted in the production of the eGFP protein in a range of cell types including bronchiolar epithelial cells, macrophages and type II pneumocytes; cell types involved in adaptive immunity and which would be valuable targets for inhaled vaccines against respiratory pathogens. Together, these data show that spray drying of LNPs enhances their stability and may enable RNA delivery to the lung for protein replacement therapy, gene editing, vaccination, and beyond.
Asunto(s)
Vacunas contra la COVID-19 , Nanopartículas , Ratas , Animales , Humanos , ARN Mensajero , LiposomasRESUMEN
The formation of trileucine-containing spray-dried microparticles intended for pulmonary delivery was studied in depth. A single-particle method was employed to study the shell formation characteristics of trileucine in the presence of trehalose as a glass former, and an empirical correlation was proposed to predict the instance of shell formation. A droplet chain instrument was used to produce and collect monodisperse particles to examine morphology and calculate particle density for different levels of trileucine. It was observed that the addition of only 0.5 mg/mL (10% w/w) trileucine to a trehalose system could lower dried particle densities by approximately 1 g/cm3. In addition, a laboratory-scale spray dryer was used to produce batches of trileucine/trehalose powders in the respirable range. Raman spectroscopy demonstrated that both components were completely amorphous. Scanning electron microscopy and time-of-flight secondary ion mass spectrometry were used to study the particle morphologies and surface compositions. For all cases with trileucine, highly rugose particles with trileucine coverages of more than 60% by mass were observed with trileucine feed fractions of as little as 2% w/w. Moreover, it was seen that at lower trileucine content, smaller and larger particles of a polydisperse powder had slightly different surface compositions. The surface activity of trileucine was also modeled via a modified form of the diffusion equation inside an evaporating droplet that took into account initial surface adsorption and eventual surface desorption due to droplet shrinkage. Finally, using the Flory-Huggins theory, it was estimated that at room temperature, liquid-liquid phase separation would start when the trileucine reached an aqueous concentration of about 18 mg/mL. Besides the surface activity of trileucine, this low concentration was assumed to explain the substantial effect of trileucine on the morphology of spray-dried particles due to early phase separation. The methodology proposed in this study can be used in the rational design of trileucine-containing microparticles.
Asunto(s)
Oligopéptidos , Administración por Inhalación , Aerosoles , Tamaño de la Partícula , PolvosRESUMEN
The particle formation of L-leucine, a dispersibility-enhancing amino acid used in the spray drying of inhalable pharmaceutical aerosols, was extensively studied using three experimental methods, and the results were interpreted with the aid of theory. A comparative-kinetics electrodynamic balance was used to study the shell formation behavior in single evaporating microdroplets containing leucine and trehalose. Different concentration thresholds of solidification and shell formation were determined for trehalose and leucine, which were then used in the particle formation model to predict the properties of spray-dried particles. Furthermore, a droplet chain instrument was used to study the particle morphologies and particle densities that were not accessible in the single particle experiments. Lab-scale spray drying was also used to produce powders typical for actual pharmaceutical applications. Raman spectroscopy confirmed that a glass former, such as trehalose, can inhibit the crystallization of leucine. The surface compositions of these spray-dried powders were analyzed via time-of-flight secondary ion mass spectrometry. The leucine surface coverage in a polydisperse powder was determined to be a function of the particle size or the initial droplet diameter of each respective particle. This observation confirms the important role of leucine crystallization kinetics in its shell-forming capabilities. A critical supersaturation ratio of 3.5 was also calculated for leucine, at which it is assumed to instantaneously nucleate out of solution. This ratio was used as the threshold for the initiation of crystallization. Crystallinity predictions for the leucine-trehalose particles based on this supersaturation ratio were in good agreement with the solid-state characterizations obtained by Raman spectroscopy. This study improves the fundamental understanding of the particle formation process of leucine-containing formulations, which can apply to other crystallizing systems and potentially facilitate the rational design of such formulations with reduced experimental effort.
Asunto(s)
Secado por Pulverización , Administración por Inhalación , Aerosoles , Leucina , Tamaño de la Partícula , PolvosRESUMEN
The Publisher regrets having introduced the following errors into the article when performing proof corrections.
RESUMEN
PURPOSE: Evaporation and particle formation from multi-solvent microdroplets containing solid excipients pertaining to spray-drying of therapeutic agents intended for lung delivery were studied. Various water and ethanol co-solvent systems containing a variety of actives and excipients (beclomethasone, budesonide, leucine, and trehalose) were considered. METHODS: Numerical methods were used to predict the droplet evaporation rates and internal solute transfers, and their results verified and compared with results from two separate experimental setups. In particular, an electrodynamic balance was used to measure the evaporation rates of multicomponent droplets and a monodisperse droplet chain setup collected dried microparticles for further analytical investigations and ultramicroscopy. RESULTS: The numerical results are used to explain the different particle morphologies dried from solutions at different co-solvent compositions. The obtained numerical data clearly show that the two parameters controlling the general morphology of a dried particle, namely the Péclet number and the degree of saturation, can change with time in a multi-solvent droplet. This fact complicates product development for such systems. However, this additional complexity vanishes at what we define as the iso-compositional point, which occurs when the solvent ratios and other composition-dependent properties of the droplet remain constant during evaporation, similar to the azeotrope of such systems during distillation. CONCLUSIONS: Numerical and experimental analysis of multi-solvent systems indicate that spray-drying near the iso-compositional ratio simplifies the design and process development of such systems.
Asunto(s)
Excipientes/química , Nebulizadores y Vaporizadores , Solventes/química , Administración por Inhalación , Beclometasona/química , Budesonida/química , Desecación , Etanol/química , Cinética , Leucina/química , Polvos/química , Teoría Cuántica , Trehalosa/química , Agua/químicaRESUMEN
By the combined use of powder and single-crystal X-ray diffraction, solid-state NMR, and molecular modeling, the crystal structures of two systems containing the unusually large tenapanor drug molecule have been determined: the free form, ANHY, and a dihydrochloride salt form, 2HCl. Dynamic nuclear polarization (DNP) assisted solid-state NMR (SSNMR) crystallography investigations were found essential for the final assignment and were used to validate the crystal structure of ANHY. From a structural informatics analysis of ANHY and 2HCl, conformational ring differences in one part of the molecule were observed which influence the relative orientation of a methyl group on a ring nitrogen and thereby impact the crystallizability of the dihydrochloride salt. From quantum chemistry calculations, the dynamics between different ring conformations in tenapanor is predicted to be fast. Addition of HCl to tenapanor results in general in a mixture of protonated ring conformers and hence a statistical mix of diastereoisomers which builds up the amorphous form, a-2HCl. This was qualitatively verified by 13C CP/MAS NMR investigations of the amorphous form. Thus, to form any significant amount of the crystalline material 2HCl, which originates from the minor (i.e., energetically less stable) ring conformations, one needs to involve nitrogen deprotonation to allow exchange between the minor and major conformations of ANHY in solution. Thus, by controlling the solution pH value to well below the p Ka of ANHY, the equilibrium between ANHY and 2HCl can be controlled and by this mechanism the crystallization of 2HCl can be avoided and the amorphous form of the dichloride salt can therefore be stabilized.
Asunto(s)
Isoquinolinas/química , Sulfonamidas/química , Cristalización/métodos , Cristalografía por Rayos X/métodos , Espectroscopía de Resonancia Magnética/métodos , Modelos Moleculares , Conformación Molecular , Polvos/química , Sales (Química)/química , Difracción de Rayos X/métodosRESUMEN
Vanillin crystals in a saturated aqueous solution disappear and a second liquid phase emerges when the temperature is raised above 51 degrees C. The phenomenon has been investigated with crystallization and equilibration experiments, using DSC, TGA, XRD and hot-stage microscopy for analysis. The new liquid solidifies on cooling, appears to melt at 51 degrees C, and has a composition corresponding to a dihydrate. However, no solid hydrate can be detected by XRD, and it is shown that the true explanation is that a liquid-liquid phase separation occurs above 51 degrees C where the vanillin-rich phase has a composition close to a dihydrate. To our knowledge, liquid-liquid phase separation has not previously been reported for the system vanillin-water, even though thousands of tonnes of vanillin are produced globally every year.