Defect Modulation via SnX2 Additives in FASnI3 Perovskite Solar Cells.

Tin halide perovskites suffer from high defect densities compared with their lead counterparts. To decrease defect densities, SnF2 is commonly used as an additive in tin halide perovskites. Herein, we investigate how SnF2 compares to other SnX2 additives (X = F, Cl, Br) in terms of electronic and ionic defect properties in FASnI3. We find that FASnI3 films with SnF2 show the lowest Urbach energies (EU) of 19 meV and a decreased p-type character, as probed with ultraviolet photoemission spectroscopy. The activation energy of ion migration, as probed with thermal admittance spectroscopy, for FASnI3 with SnF2 is 1.33 eV, which is higher than with SnCl2 and SnBr2, which are 1.22 and 0.79 eV, respectively, resulting in less ion migration. Because of improved defect passivation, the champion power conversion efficiency of FASnI3 with SnF2 is 7.47% and only 1.84% and 1.20% with SnCl2 and SnBr2, respectively.

Combination of Counterion Size and Doping Concentration Determines the Electronic and Thermoelectric Properties of Semiconducting Polymers.

In both chemical and electrochemical doping of organic semiconductors (OSCs), a counterion, either from the electrolyte or ionized dopant, balances the charge introduced to the OSC. Despite the large influence of this counterion on OSC optical and electronic response, there remains substantial debate on how a fundamental parameter, ion size, impacts these properties. This work resolves much of this debate by accounting for two doping regimes. In the low-doping regime, the Coulomb binding energies between charge carriers on the OSC and the counterions are significant, and larger counterions lead to decreased Coulomb interactions, more delocalized charge carriers, and higher electrical conductivities. In the high-doping regime, the Coulomb binding energies become negligible due to the increased dielectric constant of the films and a smoothing of the energy landscape; thereby, the electrical conductivities depend primarily on the extent of morphological disorder in the OSC. Moreover, in regioregular poly(3-hexylthiophene), rr-P3HT, smaller counterions lead to greater bipolaron concentrations in the low-doping regime due to the increased Coulomb interactions. Emphasizing the impact of the counterion size, it is shown that larger counterions can lead to increased thermoelectric power factors for rr-P3HT.

Air-Stable Perylene Diimide Trimer Material for N-Type Organic Electrochemical Transistors.

A new method is reported to make air-stable n-type organic mixed ionic-electronic conductor (OMIEC) films for organic electrochemical transistors (OECTs) using a solution-processable small molecule helical perylene diimide trimer, hPDI[3]-C11. Alkyl side chains are attached to the conjugated core for processability and film making, which are then cleaved via thermal annealing. After the sidechains are removed, the hPDI[3] film becomes less hydrophobic, more ordered, and has a deeper lowest unoccupied molecular orbital (LUMO). These features provide improved ionic transport, greater electronic mobility, and increased stability in air and in aqueous solution. Subsequently, hPDI[3]-H is used as the active material in OECTs and a device with a transconductance of 44 mS, volumetric capacitance of ≈250 F cm-3, µC* value of 1 F cm-1 V-1 s-1, and excellent stability (> 5 weeks) is demonstrated. As proof of their practical applications, a hPDI[3]-H-based OECTs as a glucose sensor and electrochemical inverter is utilized. The approach of side chain removal after film formation charts a path to a wide range of molecular semiconductors to be used as stable, mixed ionic-electronic conductors.

Low-loss contacts on textured substrates for inverted perovskite solar cells.

Inverted perovskite solar cells (PSCs) promise enhanced operating stability compared to their normal-structure counterparts1-3. To improve efficiency further, it is crucial to combine effective light management with low interfacial losses4,5. Here we develop a conformal self-assembled monolayer (SAM) as the hole-selective contact on light-managing textured substrates. Molecular dynamics simulations indicate that cluster formation during phosphonic acid adsorption leads to incomplete SAM coverage. We devise a co-adsorbent strategy that disassembles high-order clusters, thus homogenizing the distribution of phosphonic acid molecules, and thereby minimizing interfacial recombination and improving electronic structures. We report a laboratory-measured power conversion efficiency (PCE) of 25.3% and a certified quasi-steady-state PCE of 24.8% for inverted PSCs, with a photocurrent approaching 95% of the Shockley-Queisser maximum. An encapsulated device having a PCE of 24.6% at room temperature retains 95% of its peak performance when stressed at 65 °C and 50% relative humidity following more than 1,000 h of maximum power point tracking under 1 sun illumination. This represents one of the most stable PSCs subjected to accelerated ageing: achieved with a PCE surpassing 24%. The engineering of phosphonic acid adsorption on textured substrates offers a promising avenue for efficient and stable PSCs. It is also anticipated to benefit other optoelectronic devices that require light management.

Evaluation of the In-Use Stability of Monoclonal Antibody IV Admixtures Prepared from Drug Products Containing Polysorbate 20 Degraded by Host-Cell Lipases.

Host-cell lipases can be present in monoclonal antibody drug products and can degrade polysorbates present in the formulations as stabilizers. We hypothesized that the in-use stability of the IV admixture prepared from such a drug product might be impacted by decreasing levels of polysorbate 20. Host-cell lipase activity has, in fact, been observed during development of one of our therapeutic monoclonal antibody drug products. Throughout the course of the product shelf life, polysorbate 20 levels decreased but no other quality attributes of the drug product were impacted. An experimental approach was developed to simulate how the prepared IV admixture in-use stability is affected as polysorbate 20 concentration in the drug product decreased over the shelf life, and from that a minimum level of polysorbate 20 required in the drug product was determined to estimate the in-use stability of the IV admixture as the polysorbate 20 in the drug product degrades. The results indicate that although the observed degradation of polysorbate 20 does not affect quality attributes of this drug product, in-use stability of the IV admixture as a function of polysorbate degradation can be impacted and should be assessed to ensure sufficient quality.

Continuous monitoring of a monoclonal antibody by size exclusion chromatography reveals a correlation between system suitability parameters and column aging.

Size exclusion chromatography (SEC) is a foundational analytical method to assess product purity of biological molecules. To ensure accurate and reproducible data that meet regulatory agency standards, it is critical to monitor the chromatographic column with efficient and continuous approaches. In this study, 19 SEC columns (Waters Acquity BEH200) were evaluated using an in-house monoclonal antibody made at Regeneron. System suitability parameters (SSPs) were used to monitor the performance of the SEC assay, including USP resolution, USP plate count, USP tailing factor, asymmetry factor, elution time, peak width, and peak height. A general linear model was built and revealed that elution time, peak width, asymmetry factor, and tailing factor increased with injection number, while peak height, resolution, and plate count decreased. After 1000 injections, tailing factor and peak width increased by more than 10%, while resolution and plate count decreased by more than 10% from their respective starting values.

New Chemical Dopant and Counterion Mechanism for Organic Electrochemical Transistors and Organic Mixed Ionic-Electronic Conductors.

Organic mixed ionic-electronic conductors (OMIECs) have varied performance requirements across a diverse application space. Chemically doping the OMIEC can be a simple, low-cost approach for adapting performance metrics. However, complex challenges, such as identifying new dopant materials and elucidating design rules, inhibit its realization. Here, these challenges are approached by introducing a new n-dopant, tetrabutylammonium hydroxide (TBA-OH), and identifying a new design consideration underpinning its success. TBA-OH behaves as both a chemical n-dopant and morphology additive in donor acceptor co-polymer naphthodithiophene diimide-based polymer, which serves as an electron transporting material in organic electrochemical transistors (OECTs). The combined effects enhance OECT transconductance, charge carrier mobility, and volumetric capacitance, representative of the key metrics underpinning all OMIEC applications. Additionally, when the TBA+ counterion adopts an "edge-on" location relative to the polymer backbone, Coulombic interaction between the counterion and polaron is reduced, and polaron delocalization increases. This is the first time such mechanisms are identified in doped-OECTs and doped-OMIECs. The work herein therefore takes the first steps toward developing the design guidelines needed to realize chemical doping as a generic strategy for tailoring performance metrics in OECTs and OMIECs.

Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells.

Perovskite solar cells (PSCs) consisting of interfacial two- and three-dimensional heterostructures that incorporate ammonium ligand intercalation have enabled rapid progress toward the goal of uniting performance with stability. However, as the field continues to seek ever-higher durability, additional tools that avoid progressive ligand intercalation are needed to minimize degradation at high temperatures. We used ammonium ligands that are nonreactive with the bulk of perovskites and investigated a library that varies ligand molecular structure systematically. We found that fluorinated aniliniums offer interfacial passivation and simultaneously minimize reactivity with perovskites. Using this approach, we report a certified quasi-steady-state power-conversion efficiency of 24.09% for inverted-structure PSCs. In an encapsulated device operating at 85°C and 50% relative humidity, we document a 1560-hour T85 at maximum power point under 1-sun illumination.

Prediction of long-term polysorbate degradation according to short-term degradation kinetics.

Polysorbates (PSs) are a class of surfactants commonly used in the formulation of protein therapeutic agents to provide protection against denaturation and aggregation. When the PS in these drug formulations degrades, loss of stabilization of the protein therapeutic and formulation may occur, resulting in particulate formation or other undesirable changes in product critical quality attributes. Here, we present a simplified platform to predict long-term PS20 and PS80 degradation for monoclonal antibody drugs containing the PS-degrading enzyme lysosomal acid lipase. The platform was based on a temperature-dependent equation derived from existing PS20 degradation stability data. Accurate prediction of both PS20 and PS80 hydrolysis for as long as 2 years was achieved through short-term kinetics studies performed within 2 weeks. This platform substantially shortens the time required to determine the long-term stability of PS degradation and therefore can be used to guide the purification process and optimization of antibody formulations.

Holistic energy landscape management in 2D/3D heterojunction via molecular engineering for efficient perovskite solar cells.

Constructing two-dimensional (2D) perovskite atop of 3D with energy landscape management is still a challenge in perovskite photovoltaics. Here, we report a strategy through designing a series of π-conjugated organic cations to construct stable 2D perovskites and to realize delicate energy level tunability at 2D/3D heterojunctions. As a result, the hole transfer energy barriers can be reduced both at heterojunctions and within 2D structures, and the preferable work function shift reduces charge accumulation at interface. Leveraging these insights and also benefitted from the superior interface contact between conjugated cations and poly(triarylamine) (PTAA) hole transporting layer, a solar cell with power conversion efficiency of 24.6% has been achieved, which is the highest among PTAA-based n-i-p devices to the best of our knowledge. The devices exhibit greatly enhanced stability and reproducibility. This approach is generic to several hole transporting materials, offering opportunities to realize high efficiency without using the unstable Spiro-OMeTAD.

Spectral Signatures of a Negative Polaron in a Doped Polymer Semiconductor: Energy Levels and Hubbard U Interactions.

The modern picture of negative charge carriers on conjugated polymers invokes the formation of a singly occupied (spin-up/spin-down) level within the polymer gap and a corresponding unoccupied level above the polymer conduction band edge. The energy splitting between these sublevels is related to on-site Coulomb interactions between electrons, commonly termed Hubbard U. However, spectral evidence for both sublevels and experimental access to the U value is still missing. Here, we provide evidence by n-doping the polymer P(NDI2OD-T2) with [RhCp*Cp]2, [N-DMBI]2, and cesium. Changes in the electronic structure after doping are studied with ultraviolet photoelectron and low-energy inverse photoemission spectroscopies (UPS, LEIPES). UPS data show an additional density of states (DOS) in the former empty polymer gap while LEIPES data show an additional DOS above the conduction band edge. These DOS are assigned to the singly occupied and unoccupied sublevels, allowing determination of a U value of ∼1 eV.

Tailoring Molecular-Scale Contact at the Perovskite/Polymeric Hole-Transporting Material Interface for Efficient Solar Cells.

Perovskite solar cells (PSCs) have delivered a power conversion efficiency (PCE) of more than 25% and incorporating polymers as hole-transporting layers (HTLs) can further enhance the stability of devices toward the goal of commercialization. Among the various polymeric hole-transporting materials, poly(triaryl amine) (PTAA) is one of the promising HTL candidates with good stability; however, the hydrophobicity of PTAA causes problematic interfacial contact with the perovskite, limiting the device performance. Using molecular side-chain engineering, a uniform 2D perovskite interlayer with conjugated ligands, between 3D perovskites and PTAA is successfully constructed. Further, employing conjugated ligands as cohesive elements, perovskite/PTAA interfacial adhesion is significantly improved. As a result, the thin and lateral extended 2D/3D heterostructure enables as-fabricated PTAA-based PSCs to achieve a PCE of 23.7%, improved from the 18% of reference devices. Owing to the increased ion-migration energy barrier and conformal 2D coating, unencapsulated devices with the new ligands exhibit both superior thermal stability under 60 °C heating and moisture stability in ambient conditions.

Highly Conductive and Solution-Processable n-Doped Transparent Organic Conductor.

Transparent conductors (TCs) play a vital role in displays, solar cells, and emerging printed electronics. Here, we report a solution-processable n-doped organic conductor from copper-catalyzed cascade reactions in the air, which involves oxidative polymerization and reductive doping in one pot. The formed polymer ink is shelf-stable over 20 days and can endure storage temperatures from -20 to 65 °C. The optimized n-doped thin-film TC exhibits a low sheet resistance of 45 Ω/sq and a high transmittance (T550 > 80%), which can rival indium tin oxide. The transparent organic conductor exhibits excellent durability under accelerated weathering tests (85 °C/85% RH). Furthermore, the n-doped polymer film can also function as an electrode material with a high volumetric capacity. When it is paired with p-doped PEDOT:PSS, a record-high coloration efficiency is obtained in a dual-polymer electrochromic device.

Metal Halide Perovskite Heterostructures: Blocking Anion Diffusion with Single-Layer Graphene.

The development of metal halide perovskite/perovskite heterostructures is hindered by rapid interfacial halide diffusion leading to mixed alloys rather than sharp interfaces. To circumvent this outcome, we developed an ion-blocking layer consisting of single-layer graphene (SLG) deposited between the metal halide perovskite layers and demonstrated that it effectively blocks anion diffusion in a CsPbBr3/SLG/CsPbI3 heterostructure. Spatially resolved elemental analysis and spectroscopic measurements demonstrate the halides do not diffuse across the interface, whereas control samples without the SLG show rapid homogenization of the halides and loss of the sharp interface. Ultraviolet photoelectron spectroscopy, DFT calculations, and transient absorbance spectroscopy indicate the SLG has little electronic impact on the individual semiconductors. In the CsPbBr3/SLG/CsPbI3, we find a type I band alignment that supports transfer of photogenerated carriers across the heterointerface. Light-emitting diodes (LEDs) show electroluminescence from both the CsPbBr3 and CsPbI3 layers with no evidence of ion diffusion during operation. Our approach provides opportunities to design novel all-perovskite heterostructures to facilitate the control of charge and light in optoelectronic applications.

Suppressing phase disproportionation in quasi-2D perovskite light-emitting diodes.

Electroluminescence efficiencies and stabilities of quasi-two-dimensional halide perovskites are restricted by the formation of multiple-quantum-well structures with broad and uncontrollable phase distributions. Here, we report a ligand design strategy to substantially suppress diffusion-limited phase disproportionation, thereby enabling better phase control. We demonstrate that extending the π-conjugation length and increasing the cross-sectional area of the ligand enables perovskite thin films with dramatically suppressed ion transport, narrowed phase distributions, reduced defect densities, and enhanced radiative recombination efficiencies. Consequently, we achieved efficient and stable deep-red light-emitting diodes with a peak external quantum efficiency of 26.3% (average 22.9% among 70 devices and cross-checked) and a half-life of ~220 and 2.8 h under a constant current density of 0.1 and 12 mA/cm2, respectively. Our devices also exhibit wide wavelength tunability and improved spectral and phase stability compared with existing perovskite light-emitting diodes. These discoveries provide critical insights into the molecular design and crystallization kinetics of low-dimensional perovskite semiconductors for light-emitting devices.

Partial body cryotherapy exposure drives acute redistribution of circulating lymphocytes: preliminary findings.

Partial body cryotherapy (PBC) is proposed to alleviate symptoms of exercise-induced muscle damage (EIMD) by reducing associated inflammation. No studies have assessed acute PBC exposure on peripheral blood mononuclear cell mobilisation or compared these with cold water immersion (CWI), which may inform how PBC impacts inflammatory processes. This trial examined the impact of a single PBC exposure on circulating peripheral blood mononuclear cells compared to CWI or a control. 26 males were randomised into either PBC (3 min at - 110 to - 140 °C), CWI (3 min at 9 °C), or control (3 min at 24 °C), with blood samples, heart rate, and blood pressure taken before and after exposure. Cytometric analysis determined that CD8+ T-cell populations were significantly elevated after treatments, with PBC increasing CD8+ T cells to a greater degree than either CWI or CON. Natural killer cell counts were also elevated after PBC, with the increase attributed specifically to the CD56loCD16+ cytotoxic subset. This provides the first evidence for the effect of PBC exposure on redistribution of immune cells. An increase in circulating leukocyte subsets such as CD8+ T cells and CD56loCD16+ natural killer cells suggests that PBC may induce a transient mobilisation of lymphocytes. PBC may thus enable a more efficient trafficking of these cells from the circulation to the site of initial cellular insult from exercise, potentially accelerating the process of cellular recovery. This provides novel evidence on the use of PBC as a recovery treatment and may also have applicability in other clinical settings involving the recovery of damaged skeletal muscle.

Low pKa of Lys promotes glycation at one complementarity-determining region of a bispecific antibody.

Protein glycation is a common, normally innocuous, post-translational modification in therapeutic monoclonal antibodies. However, when glycation occurs on complementarity-determining regions (CDRs) of a therapeutic monoclonal antibody, its biological activities (e.g., potency) may be impacted. Here, we present a comprehensive approach to understanding the mechanism of protein glycation using a bispecific antibody. Cation exchange chromatography and liquid chromatography-mass spectrometry were used to characterize glycation at a lysine residue within a heavy chain (HC) CDR (HC-CDR3-Lys98) of a bispecific antibody. Thermodynamic analysis revealed that this reaction is reversible and can occur under physiological conditions with an apparent affinity of 8-10 mM for a glucose binding to HC-CDR3-Lys98. Results from kinetic analysis demonstrated that this reaction follows Arrhenius behavior in the temperature range of 5°C-45°C and can be well predicted in vitro and in a non-human primate. In addition, this glycation reaction was found to be driven by an unusually low pKa on the ε-amino group of HC-CDR3-Lys98. Van't Hoff analysis and homology modeling suggested that this reaction is enthalpically driven, with this lysine residue surrounded by a microenvironment with low polarity. This study provides, to our knowledge, new insights toward a mechanistic understanding of protein glycation and strategies to mitigate the impact of protein glycation during pharmaceutical development.

All-perovskite tandem solar cells with improved grain surface passivation.

All-perovskite tandem solar cells hold the promise of surpassing the efficiency limits of single-junction solar cells1-3; however, until now, the best-performing all-perovskite tandem solar cells have exhibited lower certified efficiency than have single-junction perovskite solar cells4,5. A thick mixed Pb-Sn narrow-bandgap subcell is needed to achieve high photocurrent density in tandem solar cells6, yet this is challenging owing to the short carrier diffusion length within Pb-Sn perovskites. Here we develop ammonium-cation-passivated Pb-Sn perovskites with long diffusion lengths, enabling subcells that have an absorber thickness of approximately 1.2 µm. Molecular dynamics simulations indicate that widely used phenethylammonium cations are only partially adsorbed on the surface defective sites at perovskite crystallization temperatures. The passivator adsorption is predicted to be enhanced using 4-trifluoromethyl-phenylammonium (CF3-PA), which exhibits a stronger perovskite surface-passivator interaction than does phenethylammonium. By adding a small amount of CF3-PA into the precursor solution, we increase the carrier diffusion length within Pb-Sn perovskites twofold, to over 5 µm, and increase the efficiency of Pb-Sn perovskite solar cells to over 22%. We report a certified efficiency of 26.4% in all-perovskite tandem solar cells, which exceeds that of the best-performing single-junction perovskite solar cells. Encapsulated tandem devices retain more than 90% of their initial performance after 600 h of operation at the maximum power point under 1 Sun illumination in ambient conditions.

Multifunctional Conjugated Ligand Engineering for Stable and Efficient Perovskite Solar Cells.

Surface passivation is an effective way to boost the efficiency and stability of perovskite solar cells (PSCs). However, a key challenge faced by most of the passivation strategies is reducing the interface charge recombination without imposing energy barriers to charge extraction. Here, a novel multifunctional semiconducting organic ammonium cationic interface modifier inserted between the light-harvesting perovskite film and the hole-transporting layer is reported. It is shown that the conjugated cations can directly extract holes from perovskite efficiently, and simultaneously reduce interface non-radiative recombination. Together with improved energy level alignment and the stabilized interface in the device, a triple-cation mixed-halide medium-bandgap PSC with an excellent power conversion efficiency of 22.06% (improved from 19.94%) and suppressed ion migration and halide phase segregation, which lead to a long-term operational stability, is demonstrated. This strategy provides a new practical method of interface engineering in PSCs toward improved efficiency and stability.