Enhancing CO2 Capture via Metal-Ligand Cooperativity: Tuning Ligand Basicity and Zn(II) Lewis Acidity.

A series of thiosemicarbazonato-hydrazinatopyridine zinc(II) complexes were evaluated as direct air CO2 capture agents. The complexes sequester CO2 in a methanol solution as a metal-coordinated methylcarbonate. The reaction is reversible upon sparging of solutions with an inert gas (N2 or Ar). The capture process involves metal-ligand cooperativity with the noncoordinating nitrogen of the hydrazinatopyridine functional group serving as a Brønsted-Lowry base and the zinc acting as a Lewis acid. In this study, the pendent amine of the thiosemicarbazonato group was varied to include 4-phenyl (ZnL5), 4-(trifluoromethyl)phenyl (ZnL6), 4-cyanophenyl (ZnL7), 4-tolyl (ZnL8), and 4-naphthyl (ZnL9). Hyperconjugation between the pendent group and the ligand core resulted in modulation of the metal ion acidity, as quantified by ligand exchange equilibrium constants (K3 = 193-511) and ligand basicity (pKa,MeOH = 11.09-11.94). Variations in electronic structure that decreased ligand basicity were more than offset by increases in Lewis acidity. The equilibrium constant (K1) for CO2 capture varied from 46300 to 73700. Overall, the value of K1 was directly related to the relative Lewis acidity of the complexes (K3). Notably, there was an overall inverse relationship between K1 and the ligand basicity. The results provide insights into ligand design to further improve CO2 capture.

Two-Membrane Dual Non-Aqueous/Aqueous Electrolyte Flow Cell Operation for Electrochemical Conversion of CO2 to Methyl Formate.

Recently, tandem cathodic reactions have been demonstrated in non-aqueous solvents to couple CO2 reduction to a secondary reaction to create novel species that are not produced in aqueous CO2 electrolysis. One reaction that can be performed with high selectivity and durability is the electrochemical conversion of CO2 to formic acid and in-situ esterification with methanol to produce methyl formate. However, the translation to a high-performance flow electrolyzer is far from trivial, as the non-aqueous catholyte leads to reactor challenges including flooding the gas diffusion electrode. Here, a two-membrane flow electrolyzer with both anion and cation exchange membranes was used with flowing methanol catholyte and aqueous anolyte. This design prevented methanol from flooding the cathode, which was a pervasive limiting issue for electrolyzers with a single membrane. Methyl formate production at 42.9 % faradaic efficiency was achieved with pure methanol in a flow electrolyzer with stable performance beyond 80 min. However, low-water-content catholyte compositions also led to increased cell resistance and lower operating current densities. Thus, with the present ionomer materials there is a tradeoff between methyl formate selectivity and current density depending on water concentration, highlighting a need for new ionomers tailored for desirable non-aqueous solvents such as methanol.

Investigating BioCaRGOS, a Sol-Gel Matrix for the Stability of Heme Proteins under Enzymatic Degradation and Low pH.

There have been significant advances in the development of vaccines for the prevention of various infectious diseases in the last few decades. These vaccines are mainly composed of proteins and nucleic acids. Poor handling and storage, exposure to high temperatures that lead to enzymatic degradation, pH variation, and various other stresses can denature the proteins or nucleic acids present in any vaccine formulation. Therefore, it is necessary to maintain a proper environment to preserve the integrity of biospecimens. To overcome these challenges, we report a practical and user-friendly approach for sol-gels called "BioCaRGOS" that can stabilize heme proteins not only in the presence of degrading enzymes and acidic pH but simultaneously maintain stability at room temperature. Heme proteins, such as myoglobin and cytochrome c, have been used for this study.

Physical structure of constitutional isomers influences antiproliferation activity of thiosemicarbazone-alkylthiocarbamate copper complexes.

A series of hybrid thiosemicarbazone-alkylthiocarbamate copper complexes with similar electronic environments but distinct physical structures have been prepared, characterized, and evaluated for antiproliferation activity. The complexes include the constitutional isomers (1-phenylpropane-1-imine-(O-ethylthiocarbamato)-2-one-(N-methylthiosemicarbazonato))copper(II) (CuL1) and (1-phenylpropane-1-one-(N-methylthiosemicarbazonato)-2-imine-(O-ethylthiocarbamato))copper(II) (CuL2) along with (1-propane-1-imine-(O-ethylthiocarbamato)-2-one-(N-methylthiosemicarbazonato))copper(II) (CuL3). Complexes CuL1 and CuL2 differ in the positions of the pendent thiosemicarbazone (TSC) and alkylthiocarbamate (ATC) moieties on the 1-phenylpropane backbone. Complex CuL3 employs a propane backbone with the TSC in the 2-position as in CuL1. The isomer pair CuL1 and CuL2 have equivalent electronic environments with indistinguishable CuII/I potentials (E1/2 = -0.86 V vs. ferrocenium/ferrocene) and electron paramagnetic resonance (EPR) spectra (g∥ = 2.26, g⊥ = 2.08). The electronic structure of CuL3 has a similar E1/2 of -0.84 V and identical EPR parameters to CuL1, 2. Single crystal X-ray diffraction studies confirm a consistent donor environment with no substantial variation in the CuN or CuS bond distances and angles between the complexes. The antiproliferation activities of the CuL1-3 were evaluated against the lung adenocarcinoma cell line (A549) and nonmalignant lung fibroblast cell line (IMR-90) using the MTT assay. CuL1 had the highest A549 activity (A549EC50 = 0.065 µM) and selectivity (IMR-90EC50/A549EC50 = 20). The constitutional isomer CuL2 displayed decreased A549 activity (0.18 µM) and selectivity (10.6). The complex CuL3 displayed activity (0.009 µM) similar to CuL1 but with a lack of selectivity (1.0). Cellular copper loading determined by ICP-MS was consistent with the activity and selectivity trends. The complexes CuL1-3 did not induce reactive oxygen species (ROS) generation.

Metal-Ligand Cooperativity Promotes Reversible Capture of Dilute CO2 as a Zn(II)-Methylcarbonate.

In this study, a series of thiosemicarbazonato-hydrazinatopyridine metal complexes were evaluated as CO2 capture agents. The complexes incorporate a non-coordinating, basic hydrazinatopyridine nitrogen in close proximity to a Lewis acidic metal ion allowing for metal-ligand cooperativity. The coordination of various metal ions with (diacetyl-2-(4-methyl-thiosemicarbazone)-3-(2-hydrazinopyridine) (H2L1) yielded ML1 (M = Ni(II), Pd(II)), ML1(CH3OH) (M = Cu(II), Zn(II)), and [ML1(PPh3)2]BF4 (M = Co(III)) complexes. The ML1(CH3OH) complexes reversibly capture CO2 with equilibrium constants of 88 ± 9 and 6900 ± 180 for Cu(II) and Zn(II), respectively. Ligand effects were evaluated with Zn(II) through variation of the 4-methyl-thiosemicarbazone with 4-ethyl (H2L2), 4-phenethyl (H2L3), and 4-benzyl (H2L4) derivatives. The equilibrium constant for CO2 capture increased to 11,700 ± 300, 15,000 ± 400, and 35,000 ± 200 for ZnL2(MeOH), ZnL3(MeOH), and ZnL4(MeOH), respectively. Quantification of ligand basicity and metal ion Lewis acidity shows that changes in CO2 capture affinity are largely associated with ligand basicity upon substitution of Cu(II) with Zn(II), while variation of the thiosemicarbazone ligand enhances CO2 affinity by tuning the metal ion Lewis acidity. Overall, the Zn(II) complexes effectively capture CO2 from dilute sources with up to 90%, 86%, and 65% CO2 capture efficiency from 400, 1000, and 2500 ppm CO2 streams.

Ligand and Linkage Isomers of Bis(ethylthiocarbamato) Copper Complexes with Cyclic C6H8 Backbone Substituents: Synthesis, Characterization, and Antiproliferation Activity.

A series of isomeric bis(alkylthiocarbamate) copper complexes have been synthesized, characterized, and evaluated for antiproliferation activity. The complexes were derived from ligand isomers with 3-methylpentyl (H2L2) and cyclohexyl (H2L3) backbone substituents, which each yield a pair of linkage isomers. The thermodynamic products CuL2a/3a have two imino N and two S donors resulting in three five-member chelate rings (555 isomers). The kinetic isomers CuL2b/3b have one imino and one hydrazino N donor and two S donors resulting in four-, six-, and five-member rings (465 isomers). The 555 isomers have more accessible CuII/I potentials (E1/2 = -811/-768 mV vs. ferrocenium/ferrocene) and lower energy charge transfer bands than their 465 counterparts (E1/2 = -923/-854 mV). Antiproliferation activities were evaluated against the lung adenocarcinoma cell line (A549) and nonmalignant lung fibroblast cell line (IMR-90) using the MTT assay. CuL2a was potent (A549EC50 = 0.080 µM) and selective (IMR-90EC50/A549EC50 = 25) for A549. Its linkage isomer CuL2b had equivalent A549 activity, but lower selectivity (IMR-90EC50/A549EC50 = 12.5). The isomers CuL3a and CuL3b were less potent with A549EC50 values of 1.9 and 0.19 µM and less selective with IMR-90EC50/A549EC50 ratios of 2.3 and 2.65, respectively. There was no correlation between reduction potential and A549 antiproliferation activity/selectivity.

Enhancing the compatibility of BioCaRGOS silica sol-gel technology with ctDNA extraction and droplet digital PCR (ddPCR) analysis.

Previously, our group had demonstrated long term stabilization of protein biomarkers using BioCaRGOS, a silica sol-gel technology. Herein, we describe workflow modifications to allow for extraction of cell free DNA (cfDNA) from primary samples containing working concentrations of BioCaRGOS, as well as the compatibility of BioCaRGOS with droplet digital PCR (ddPCR) analysis for pancreatic cancer biomarkers i.e., KRAS circulating tumor DNA (ctDNA). Preliminary attempts to extract ctDNA from BioCaRGOS containing samples demonstrated interference in the extraction of primary samples and the interference with ddPCR analysis when BioCaRGOS was directly introduced to stabilize sample extracts. In our modified technique, we have minimized the interference caused by methanol with ddPCR by complete removal of methanol from the activated BioCaRGOS formulation prior to addition to the biospecimen or ctDNA extract. Interference of the silica matrix present in BioCaRGOS with ctDNA extraction was eliminated through the introduction of invert filtration of the sample prior to extraction. These modifications to the workflow of BioCaRGOS containing samples allow for use of BioCaRGOS for stabilization of trace quantities of nucleic acid biomarkers such as plasma ctDNA, while retaining the capability to extract the biomarker and quantify based on ddPCR.

Ligand-Centered Hydrogen Evolution with Ni(II) and Pd(II)DMTH.

In this study, we report a pair of electrocatalysts for the hydrogen evolution reaction (HER) based on the noninnocent ligand diacetyl-2-(4-methyl-3-thiosemicarbazone)-3-(2-pyridinehydrazone) (H2DMTH, H2L1). The neutral complexes NiL1 and PdL1 were synthesized and characterized by spectroscopic and electrochemical methods. The complexes contain a non-coordinating, basic hydrazino nitrogen that is protonated during the HER. The pKa of this nitrogen was determined by spectrophotometric titration in acetonitrile to be 12.71 for NiL1 and 13.03 for PdL1. Cyclic voltammograms of both NiL1 and PdL1 in acetonitrile exhibit diffusion-controlled, reversible ligand-centered events at -1.83 and -1.79 V (vs ferrocenium/ferrocene) for NiL1 and PdL1, respectively. A quasi-reversible, ligand-centered event is observed at -2.43 and -2.34 V for NiL1 and PdL1, respectively. The HER activity in acetonitrile was evaluated using a series of neutral and cationic acids for each catalyst. Kinetic isotope effect (KIE) studies suggest that the precatalytic event observed is associated with a proton-coupled electron transfer step. The highest turnover frequency values observed were 6150 s-1 at an overpotential of 0.74 V for NiL1 and 8280 s-1 at an overpotential of 0.44 V for PdL1. Density functional theory (DFT) computations suggest both complexes follow a ligand-centered HER mechanism where the metals remain in the +2 oxidation state.

Investigations of Bis(alkylthiocarbamato)copper Linkage Isomers.

Linkage isomers are coordination compounds with the same composition but different donor atoms, resulting in distinct physical and electronic structures. A pair of linkage isomers, CuL555 and CuL465, derived from phenylglyoxal bis(ethylthiocarbamate) were synthesized, isolated, and characterized by structural, electrochemical, and spectroscopic methods. The isomers are stable in solution under ambient conditions, but CuL465 converts to CuL555 in acid, consistent with quantum-chemical calculations. The complexes were screened against a lung adenocarcinoma cell line (A549) and a nonmalignant lung fibroblast cell line (IMR-90) to evaluate the antiproliferation activity. CuL555 and CuL465 possessed EC50 values of 0.113 ± 0.030 and 0.115 ± 0.038 µM for A549 and 1.87 ± 0.29 and 0.77 ± 0.22 µM for IMR-90, respectively.

The pH and Potential Dependence of Pb-Catalyzed Electrochemical CO2 Reduction to Methyl Formate in a Dual Methanol/Water Electrolyte.

The conversion of waste CO2 to value-added chemicals through electrochemical reduction is a promising technology for mitigating climate change while simultaneously providing economic opportunities. The use of non-aqueous solvents like methanol allows for higher CO2 availability and novel products. In this work, the electrochemistry of CO2 reduction in acidic methanol catholyte at a Pb working electrode was investigated while using a separate aqueous anolyte to promote a sustainable water oxidation half-reaction. The selectivity among methyl formate (a product unique to reduction of CO2 in methanol), formic acid, and formate was critically dependent on the catholyte pH, with higher pH conditions leading to formate and low pH favoring methyl formate. The potential dependence of the product distribution in acidic catholyte was also investigated, with a faradaic efficiency for methyl formate as high as 75 % measured at -2.0 V vs. Ag/AgCl.

DNA-mediated hierarchical organization of gold nanoprisms into 3D aggregates and their application in surface-enhanced Raman scattering.

Colloidal crystallization using DNA provides a robust method for fabricating highly programmable nanoparticle superstructures with collective plasmonic properties. Here, we report on the DNA-guided fabrication of 3D plasmonic aggregates from polydisperse gold nanoprisms. We first construct 1D crystals via DNA-induced and shape-directed face-to-face assembly of anisotropic gold nanoprisms. Using the near-Tm thermal annealing approach that promotes long-range DNA-induced interaction and ordering, we then assemble 1D nanoprism crystals into a 3D nanoprism aggregate that exhibits a polycrystalline morphology with nanoscale ordering and microscale dimensions. The presence of closely packed nanoprism arrays over a large area gives rise to strong near-field plasmonic coupling and generates a high density of plasmonic hot spots within the 3D nanoprism aggregates that exhibit excellent surface-enhanced Raman scattering performance. The plasmonic 3D nanoprism aggregates demonstrate significant SERS enhancement (<106), and low detection limits (10-9M) with good sample-to-sample reproducibility (CV ∼ only 5.6%) for SERS analysis of the probe molecule, methylene blue. These findings highlight the potential of 3D anisotropic nanoparticle aggregates as functional plasmonic nanoarchitectures that could find applications in sensing, photonics, optoelectronics and lasing.

Solvation of NiOxfor hole transport layer deposition in perovskite solar cells.

A series of nickel oxide (NiOx) inks, in the perovskite antisolvent chlorobenzene (CB) containing 15% ethanol, were prepared for the fabrication of p-i-n perovskite solar cells by blade coating. The inks included triethylamine (Et3N) and alkyl xanthate salts as ligands to disperse NiOxparticle aggregates and stabilize suspension. A total of four inks were evaluated: 0X (Et3N with no alkyl xanthate), 4X (Et3N + potassiumn-butyl xanthate), 12X (Et3N + potassiumn-dodecyl xanthate), and 18X (Et3N + potassiumn-octadecyl xanthate). The inks were characterized by UV-visible spectroscopy and FT-IR spectroscopy and the resulting films analyzed by thermogravimetry and scanning electron microscopy. Devices prepared using the 0X ink resulted in a peak power conversion efficiency (PCE) of 14.47% (0.25 cm2) and 9.96% (1 cm2). The 0X devices showed no significant loss of PCE after 100 days in a nitrogen flow box. Devices prepared with inks containing alkyl xanthate ligand had lower PCE that decreased with decreasing chain length, 18X > 12X > 4X.

Antifungal activity of thiosemicarbazones, bis(thiosemicarbazones), and their metal complexes.

Fungi are ubiquitous in nature, and typically cause little or no environmental or pathogenic damage to their plant, animal, and human hosts. However, a small but growing number of pathogenic fungi are spreading world-wide at an alarming rate threatening global ecosystem health and proliferation. Many of these emerging pathogens have developed multi-drug resistance to front line therapeutics increasing the urgency for the development of new antifungal agents. This review examines the development of thiosemicarbazones, bis(thiosemicarbazones), and their metal complexes as potential antifungal agents against more than 65 different fungal strains. The fungistatic activity of the compounds are quantified based on the zone of inhibition, minimum inhibitory concentration, or growth inhibition percentage. In this review, reported activities were standardized based on molar concentrations to simplify comparisons between different compounds. Of all the fungal strains reported in the review, A. niger in particular was very resistant towards a majority of tested compounds. Our analysis of the data shows that metal complexes are typically more active than non-coordinated ligands with copper(II) and zinc(II) complexes generally displaying the highest activity.

DNA-induced assembly of gold nanoprisms and polystyrene beads into 3D plasmonic SERS substrates.

The utilization of nanoparticle-polymer bead hybrid nanostructures as a SERS substrate depends on the control of the deposition, density, and distribution of nanoparticles on the bead surface. Here we demonstrate the fabrication of a large area SERS substate via a two- step DNA mediated assembly of gold nanoprisms and polystyrene (PS) beads into a large ensemble of beads that are densely coated with nanoprisms. First, nanoprisms are loaded on PS beads through DNA hybridization. The close packed arrangement of anisotropic nanoprisms in different orientations on a bead surface results in a plasmonic substrate with a variable nanogap size ranging 1-20 nm. Nanoprisms-coated beads are then assembled into a large stack or aggregate of beads using a DNA-induced crystallization approach. Each aggregate consists of 20-50 nanoprisms-coated beads, leading to the formation a large area of three-dimensional SERS substrate with a high-density of hot spots for SERS enhancement. An excellent enhancement factor (EF) of [Formula: see text] and a very high detection sensitivity (up to 10-10 M) are observed for the analysis of a probe molecule (Methylene blue) using the SERS substrate.

Exploiting Metal-Ligand Cooperativity to Sequester, Activate, and Reduce Atmospheric Carbon Dioxide with a Neutral Zinc Complex.

As atmospheric levels of carbon dioxide (CO2) continue to increase, there is an immediate need to balance the carbon cycle. Current approaches require multiple processes to fix CO2 from the atmosphere or flue gas and then reduce it to value-added products. The zinc(II) catalyst Zn(DMTH) (DMTH = diacetyl-2-(4-methyl-3-thiosemicarbazonate)-3-(2-pyridinehydrazonato)) reduces CO2 from air to formate with a faradaic efficiency of 15.1% based on total charge. The catalyst utilizes metal-ligand cooperativity and redox-active ligands to fix, activate, and reduce CO2. This approach provides a new strategy that incorporates sustainable earth-abundant metals that are oxygen and water tolerant.

Synthesis, Characterization, and Biological Activity of Hybrid Thiosemicarbazone-Alkylthiocarbamate Metal Complexes.

A series of hybrid ligands (H2L1-H2L3) derived from 4-methyl-3-thiosemicarbazide and hydrazinecarbothioic acid O-alkyl esters were synthesized and characterized by NMR. The ligands were chelated with copper (4-6), nickel (7-9), and zinc (10-12) and characterized by spectroscopy, electrochemistry, and single crystal X-ray crystallography. The chelated metals displayed substantial anodic shifts in the CuII/I reduction potential of ∼160 mV relative to their bis(thiosemicarbazone) analogues. The metal chelates 4-12 were evaluated for potential anticancer activity by MTT assays, and selected results were confirmed by clonogenic and trypan blue assays. The copper derivatives 4 and 6 were found to have potent and cancer-selective antiproliferative effects, with GI50 values less than 100 nM in A549 lung adenocarcinoma cells compared with at least 20-fold less activity in IMR90 nonmalignant lung fibroblasts. In comparison, the nickel complexes were much less active and had little cancer-selectivity. Varying by ligand, the zinc complexes were less potent or had comparable activity compared to that of the corresponding copper complex. UV-visible spectroscopy indicated that zinc complex 10 was transmetalated in the presence of equimolar copper, whereas nickel complex 7 was not. Copper complexes 4 and 6 were also assessed in the NCI60 screen and were found to have cytotoxic activity against most solid tumor cell lines. In MTT assays, 4 and 6 were substantially more active against A549 cancer cells than Cu(ATSM) and were more cancer-selective (for A549 compared to IMR-90) than Cu(GTSM). Our results suggest that hybrid thiosemicarbazone-alkylthiocarbamate copper complexes have potential for development as new anticancer agents.

Effect of Stacking Interactions on the Translation of Structurally Related Bis(thiosemicarbazonato)nickel(II) HER Catalysts to Modified Electrode Surfaces.

A series of crystalline nickel(II) complexes (1-3) based on inexpensive bis(thiosemicarbazone) ligands diacetylbis(4-methyl-3-thiosemicarbazone) (H2ATSM), diacetylbis(4,4-dimethyl-3-thiosemicarbazone) (H2ATSDM), and diacetylbis[4-(2,2,2-trifluoroethyl)-3-thiosemicarbazone] (H2ATSM-F6) were synthesized and characterized by single-crystal X-ray diffraction and NMR, UV-visible, and Fourier transform infrared spectroscopies. Modified electrodes GC-1-GC-3 were prepared with films of 1-3 deposited on glassy carbon and evaluated as potential hydrogen evolution reaction (HER) catalysts. HER studies in 0.5 M aqueous H2SO4 (10 mA cm-2) revealed dramatic shifts in the overpotential from 0.740 to 0.450 V after extended cycling for 1 and 2. The charge-transfer resistances for GC-1-GC-3 were determined to be 270, 160, and 630 Ω, respectively. Characterization of the modified surfaces for GC-1 and GC-2 by scanning electron microscopy and Raman spectroscopy revealed similar crystalline coatings before HER that changed to surface-modified crystallites after conditioning. The surface of GC-3 had an initial glasslike appearance before HER that delaminated after HER. The differences in the surface morphology and the effect of conditioning are correlated with crystal-packing effects. Complexes 1 and 2 pack as columns of interacting complexes in the crystallographic a direction with short interplanar spacings between 3.37 and 3.54 Å. Complex 3 packs as columns of isolated molecules in the crystallographic b direction with long-range interplanar spacings of 9.40 Å.

Utilizing Charge Effects and Minimizing Intramolecular Proton Rearrangement to Improve the Overpotential of a Thiosemicarbazonato Zinc HER Catalyst.

The zinc(II) complex of diacetyl-2-(4-methyl-3-thiosemicarbazone)-3-(2-hydrazonepyridine), ZnL1 (1), was prepared and evaluated as a precatalyst for the hydrogen evolution reaction (HER) under homogeneous conditions in acetonitrile. Complex 1 is protonated on the noncoordinating nitrogen of the hydrazonepyridine moiety to yield the active catalyst Zn(HL1)OAc (2) upon addition of acetic acid. Addition of methyl iodide to 1 yields the corresponding methylated derivative ZnL2I (3). In solution, partial dissociation of the coordinated iodide yields the cationic derivative 3'. Complexes 1-3 were characterized by 1H NMR, FT-IR, and UV-visible spectroscopies. The solid-state structures of 2 and 3 were determined by single crystal X-ray diffraction. HER studies conducted in acetonitrile with acetic acid as the proton source yield a turnover frequency (TOF) of 7700 s-1 for solutions of 1 at an overpotential of 1.27 V and a TOF of 6700 s-1 for solutions of 3 at an overpotential of 0.56 V. For both complexes, the required potential for catalysis, Ecat/2, is larger than the thermodynamic reduction potential, E1/2, indicative of a kinetic barrier attributed to intramolecular proton rearrangement. The effect is larger for solutions of 1 (+440 mV) than for solutions of 3 (+160 mV). Controlled potential coulometry studies were used to determine faradaic efficiencies of 71 and 89% for solutions of 1 and 3, respectively. For both catalysts, extensive cycling of potential under catalytic conditions results in the deposition of a film on the glassy carbon electrode surface that is active as an HER catalyst. Analysis of the film of 3 by X-ray photoelectron spectroscopy indicates the complex remains intact upon deposition. A proposed ligand-centered HER mechanism with 1 as a precatalyst to 2 is supported computationally using density functional theory (DFT). All catalytic intermediates in the mechanism were structurally and energetically characterized with the DFT/B3LYP/6-311g(d,p) in solution phase using a polarizable continuum model (PCM). The thermodynamic feasibility of the mechanism is supported by calculation of equilibrium constants or reduction potentials for each proposed step.

Photocatalytic hydrogen evolution on Si photocathodes modified with bis(thiosemicarbazonato)nickel(ii)/Nafion.

The molecular catalyst diacetyl-bis(N-4-methyl-3-thiosemi-carbazonato)nickel(ii) (NiATSM) was integrated with Si for light-driven hydrogen evolution from water. Compared to an equivalent loading of Ni metal, the NiATSM/p-Si electrode performed better. Durability of the surface-bound catalyst under operation in acid was achieved without covalent attachment by using Nafion binding.

Active uptake of hydrophilic copper complex Cu(ii)-TETA in primary cultures of neonatal rat cardiomyocytes.

Myocardial ischemia leads to copper efflux from the heart. The ischemic tissue with a low copper content fails to take up copper from the circulation even under the conditions of serum copper elevation. Cardiac copper repletion thus requires other available forms of this element than those currently known to bind to copper transport proteins. The copper complex of triethylenetetramine (TETA) is a metabolite of TETA, which has the potential to increase cardiac copper content in vivo. In the present study, we synthesized Cu(ii)-TETA, analyzed its crystal structure, and demonstrated the role of this compound in facilitating copper accumulation in primary cultures of neonatal rat cardiomyocytes. The Cu(ii)-TETA compound formed a square pyramidal chloride salt [Cu(TETA)Cl]Cl structure, which dissociates from chloride in aqueous solution to yield the four-coordinate dication Cu(ii)-TETA. Cu(ii)-TETA was accumulated as an intact compound in cardiomyocytes. Analysis from time-dependent copper accumulation in cardiomyocytes defined a different dynamic process in copper uptake between Cu(ii)-TETA and CuCl2 exposure. An additive copper accumulation in cardiomyocytes was found when the cells were exposed to both CuCl2 and Cu(ii)-TETA. Gene silencing of copper transport 1 (CTR1) did not affect cross-membrane transportation of Cu(ii)-TETA, but inhibited copper cellular accumulation from CuCl2. Furthermore, the uptake of Cu(ii)-TETA by cardiomyocytes was ATP-dependent. It is thus concluded that the formation of Cu(ii)-TETA facilitates copper accumulation in cardiomyocytes through an active CTR1-independent transportation process.