Deep-Blue and Fast Delayed Fluorescence from Carbene-Metal-Amides for Highly Efficient and Stable Organic Light-Emitting Diodes.

Linear gold complexes of the "carbene-metal-amide" (CMA) type are prepared with a rigid benzoguanidine amide donor and various carbene ligands. These complexes emit in the deep-blue range at 424 and 466 nm with 100% quantum yields in all media. The deep-blue thermally activates delayed fluorescence originates from a charge transfer state with an excited state lifetime as low as 213 ns, resulting in fast radiative rates of 4.7 × 106 s-1. The high thermal and photo-stability of these carbene-metal-amide (CMA) materials enabled the authors to fabricate highly energy-efficient organic light-emitting diodes (OLED) in host-guest architectures. Deep-blue OLED devices with electroluminescence at 416 and 457 nm with practical external quantum efficiencies of up to 23% at 100 cd m-2 with excellent color coordinates CIE (x; y) = 0.16; 0.07 and 0.17; 0.18 are reported. The operating stability of these OLEDs is the longest reported to date (LT50 = 1 h) for deep-blue CMA emitters, indicating a high promise for further development of blue OLED devices. These findings inform the molecular design strategy and correlation between delayed luminescence with high radiative rates and CMA OLED device operating stability.

Understanding Spin-Triplet Excited States in Carbene-Metal-Amides.

Carbene-metal-amides (CMAs) are emerging delayed fluorescence materials for organic light-emitting diode (OLED) applications. CMAs possess fast, efficient emission owing to rapid forward and reverse intersystem crossing (ISC) rates. The resulting dynamic equilibrium between singlet and triplet spin manifolds distinguishes CMAs from most purely organic thermally activated delayed fluorescence emitters. However, direct experimental triplet characterization in CMAs is underutilized, limiting our detailed understanding of the ISC mechanism. In this work, we combine time-resolved spectroscopy with tuning of state energies through environmental polarity and metal substitution, focusing on the interplay between charge-transfer (3CT) and local exciton (3LE) triplets. Unlike previous photophysical work, we investigate evaporated host:guest films of CMAs and small-molecule hosts for increased device relevance. Transient absorption reveals an evolution in the triplet excited-state absorption (ESA) consistent with a change in orbital character between hosts with differing dielectric constants. Using quantum chemical calculations, we simulate ESAs of the lowest triplet states, highlighting the contribution of only 3CT and donor-moiety 3LE states to spectral features, with no strong evidence for a low-lying acceptor-centered 3LE. Thus, our work provides a blueprint for understanding the role of triplet excited states in CMAs which will enable further intelligent optimization of this promising class of materials.

Identifying Current Collectors that Enable Light-Battery Interactions.

In recent years, there has been an increased focus on studying light-battery interactions in the context of operando optical studies and integrated photoelectrochemical energy harvesting. However, there has been little insight into identifying suitable "light-accepting" current collectors for this class of batteries. In this study, fluorine-doped tin oxide, indium-tin oxide, and silver nanowire-graphene films are analyzed along with carbon paper, carbon nanotube paper, and stainless-steel mesh as current collectors for optical batteries. They are categorized into two classes - transmissive and non-transmissive, based on the orientation of the light-electrode interaction. Various methods to prepare the electrode are highlighted, including drop casting and the fabrication of free-standing electrodes. The optical and electrical properties of these current collectors as well as their electrochemical stability are measured using linear sweep voltammetry against zinc and lithium anodes. Finally, the rate performance and long-term cycling stability of lithium manganese oxide (LiMn2O4) cathodes are measured against lithium anodes with these current collectors and their performance is compared. These results show which current collector to choose depends on the application and cell chemistry. These guidelines will assist in the design of future optical cells for in-situ measurements and photoelectrochemical energy storage.

Excited-state Engineering Enables Efficient Deep-blue Light-emitting Diodes Exhibiting BT.2020 Color Gamut.

Organic luminescent materials that exhibit thermally activated delayed fluorescence (TADF) can convert non-emissive triplet excitons into emissive singlet states through a reverse intersystem crossing (RISC) process. Therefore, they have tremendous potential for applications in organic light-emitting diodes (OLEDs). However, with the development of ultra-high definition 4K/8K display technologies, designing efficient deep-blue TADF materials to achieve the Commission Internationale de l'Éclairage (CIE) coordinates fulfilling BT.2020 remains a significant challenge. Here, we propose an effective approach to design deep-blue TADF molecules based on hybrid long- and short-range charge-transfer by incorporation of multiple donor moieties into organoboron multiple resonance acceptors. The resulting TADF molecule exhibits deep-blue emission at 414 nm with a full width at half maximum (FWHM) of 29 nm, together with a thousand-fold increase in RISC rate. OLEDs based on our champion material achieved a record maximum external quantum efficiency (EQE) of 22.8% with CIE coordinates of (0.163, 0.046), approaching the coordinates of the BT.2020 blue standard. Moreover, TADF-assisted fluorescence devices employing our designed material as a sensitizer exhibited an exceptional EQE of 33.1%. Our work thus provides a blueprint for future development of efficient deep-blue TADF emitters, representing an important milestone towards meeting the blue color gamut standard of BT.2020. This article is protected by copyright. All rights reserved.

Suppression of Dexter transfer by covalent encapsulation for efficient matrix-free narrowband deep blue hyperfluorescent OLEDs.

Hyperfluorescence shows great promise for the next generation of commercially feasible blue organic light-emitting diodes, for which eliminating the Dexter transfer to terminal emitter triplet states is key to efficiency and stability. Current devices rely on high-gap matrices to prevent Dexter transfer, which unfortunately leads to overly complex devices from a fabrication standpoint. Here we introduce a molecular design where ultranarrowband blue emitters are covalently encapsulated by insulating alkylene straps. Organic light-emitting diodes with simple emissive layers consisting of pristine thermally activated delayed fluorescence hosts doped with encapsulated terminal emitters exhibit negligible external quantum efficiency drops compared with non-doped devices, enabling a maximum external quantum efficiency of 21.5%. To explain the high efficiency in the absence of high-gap matrices, we turn to transient absorption spectroscopy. It is directly observed that Dexter transfer from a pristine thermally activated delayed fluorescence sensitizer host can be substantially reduced by an encapsulated terminal emitter, opening the door to highly efficient 'matrix-free' blue hyperfluorescence.

Ligand-Directed Self-Assembly of Organic-Semiconductor/Quantum-Dot Blend Films Enables Efficient Triplet Exciton-Photon Conversion.

Blends comprising organic semiconductors and inorganic quantum dots (QDs) are relevant for many optoelectronic applications and devices. However, the individual components in organic-QD blends have a strong tendency to aggregate and phase-separate during film processing, compromising both their structural and electronic properties. Here, we demonstrate a QD surface engineering approach using electronically active, highly soluble semiconductor ligands that are matched to the organic semiconductor host material to achieve well-dispersed inorganic-organic blend films, as characterized by X-ray and neutron scattering, and electron microscopies. This approach preserves the electronic properties of the organic and QD phases and also creates an optimized interface between them. We exemplify this in two emerging applications, singlet-fission-based photon multiplication (SF-PM) and triplet-triplet annihilation-based photon upconversion (TTA-UC). Steady-state and time-resolved optical spectroscopy shows that triplet excitons can be transferred with near unity efficiently across the organic-inorganic interface, while the organic films maintain efficient SF (190% yield) in the organic phase. By changing the relative energy between organic and inorganic components, yellow upconverted emission is observed upon 790 nm NIR excitation. Overall, we provide a highly versatile approach to overcome longstanding challenges in the blending of organic semiconductors with QDs that have relevance for many optical and optoelectronic applications.

Phosphorescent Carbene-Gold-Arylacetylide Materials as Emitters for Near UV-OLEDs.

A series of carbene-gold-acetylide complexes [(BiCAAC)AuCC]n C6 H5- n (n = 1, Au1; n = 2, Au2; n = 3, Au3; BiCAAC = bicyclic(alkyl)(amino)carbene) have been synthesized in high yields. Compounds Au1-Au3 exhibit deep-blue to blue-green phosphorescence with good quantum yields up to 43% in all media. An increase of the (BiCAAC)Au moieties in gold complexes Au1-Au3 increases the extinction coefficients in the UV-vis spectra and stronger oscillator strength coefficients supported by theoretical calculations. The luminescence radiative rates decrease with an increase of the (BiCAAC)Au moieties. The time-dependent density functional theory study supports a charge-transfer nature of the phosphorescence due to the large (0.5-0.6 eV) energy gap between singlet excited (S1 ) and triplet excited (T1 ) states. Transient luminescence study reveals the presence of both nonstructured UV prompt-fluorescence and vibronically resolved long-lived phosphorescence 428 nm. Organic light-emitting diodes (OLED) are fabricated by physical vapor deposition with 2,8-bis(diphenylphosphoryl)dibenzo[b,d]furan (PPF) as a host material with complex Au1. The near-UV electroluminescence is observed at 405 nm with device efficiency of 1% while demonstrating OLED device lifetime LT50 up to 20 min at practical brightness of 10 nits, indicating a highly promising class of materials to develop stable UV-OLEDs.

Does Heat Play a Role in the Observed Behavior of Aqueous Photobatteries?

Light-rechargeable photobatteries have emerged as an elegant solution to address the intermittency of solar irradiation by harvesting and storing solar energy directly through a battery electrode. Recently, a number of compact two-electrode photobatteries have been proposed, showing increases in capacity and open-circuit voltage upon illumination. Here, we analyze the thermal contributions to this increase in capacity under galvanostatic and photocharging conditions in two promising photoactive cathode materials, V2O5 and LiMn2O4. We propose an improved cell and experimental design and perform temperature-controlled photoelectrochemical measurements using these materials as photocathodes. We show that the photoenhanced capacities of these materials under 1 sun irradiation can be attributed mostly to thermal effects. Using operando reflection spectroscopy, we show that the spectral behavior of the photocathode changes as a function of the state of charge, resulting in changing optical absorption properties. Through this technique, we show that the band gap of V2O5 vanishes after continued zinc ion intercalation, making it unsuitable as a photocathode beyond a certain discharge voltage. These results and experimental techniques will enable the rational selection and testing of materials for next-generation photo-rechargeable systems.

Efficient and Bright Organic Radical Light-Emitting Diodes with Low Efficiency Roll-Off.

Organic radicals have been of interest due to their potential to replace nonradical-based organic emitters, especially for deep-red/near-infrared (NIR) electroluminescence (EL), based on the spin-allowed doublet fluorescence. However, the performance of the radical-based EL devices is limited by low carrier mobility which causes a large efficiency roll-off at high current densities. Here, highly efficient and bright doublet EL devices are reported by combining a thermally activated delayed fluorescence (TADF) host that supports both electron and hole transport and a tris(2,4,6-trichlorophenyl)methyl-based radical emitter. Steady-state and transient photophysical studies reveal the optical signatures of doublet luminescence mechanisms arising from both host and guest photoexcitation. The host system presented here allows balanced hole and electron currents, and a high maximum external quantum efficiency (EQE) of 17.4% at 707 nm peak emission with substantially improved efficiency roll-off is reported: over 70% of the maximum EQE (12.2%) is recorded at 10 mA cm-2 , and even at 100 mA cm-2 , nearly 50% of the maximum EQE (8.4%) is maintained. This is an important step in the practical application of organic radicals to NIR light-emitting devices.

Spatially Resolved Optical Efficiency Measurements of Luminescent Solar Concentrators.

Luminescent solar concentrators (LSCs) are able to concentrate both direct and diffuse solar radiation, and this ability has led to great interest in using them to improve solar energy capture when coupled to traditional photovoltaics (PV). In principle, a large-area LSC could concentrate light onto a much smaller area of PV, thus reducing costs or enabling new architectures. However, LSCs suffer from various optical losses which are hard to quantify using simple measurements of power conversion efficiency. Here, we show that spatially resolved photoluminescence quantum efficiency measurements on large-area LSCs can be used to resolve various loss processes such as out-coupling, self-absorption via emitters, and self-absorption from the LSC matrix. Further, these measurements allow for the extrapolation of device performance to arbitrarily large LSCs. Our results provide insight into the optimization of optical properties and guide the design of future LSCs for improved solar energy capture.

Thermalization and relaxation mediated by phonon management in tin-lead perovskites.

Understanding and control of ultrafast non-equilibrium processes in semiconductors is key to making use of the full photon energy before relaxation, leading to new ways to break efficiency limits for solar energy conversion. In this work, we demonstrate the observation and modulation of slow relaxation in uniformly mixed tin-lead perovskites (MASnxPb1-xI3 and CsSnxPb1-xI3 nanocrystals). Transient absorption measurements reveal that slow cooling mediated by a hot phonon bottleneck effect appears at carrier densities above ~1018 cm-3 for tin-lead alloy nanocrystals, and tin addition is found to give rise to suppressed cooling. Within the alloy nanoparticles, the combination of a newly introduced high-energy band, screened Fröhlich interaction, suppressed Klemens decay and reduced thermal conductivity (acoustic phonon transport) with increased tin content contributes to the slowed relaxation. For inorganic nanocrystals where defect states couple strongly with carriers, sodium doping has been confirmed to benefit in maintaining hot carriers by decoupling them from deep defects, leading to a decreased energy-loss rate during thermalization and an enhanced hot phonon bottleneck effect. The slow cooling we observe uncovers the intrinsic photophysics of perovskite nanocrystals, with implications for photovoltaic applications where suppressed cooling could lead to hot-carrier solar cells.

Understanding the Chemical Mechanism behind Photoinduced Enhanced Raman Spectroscopy.

Photoinduced enhanced Raman spectroscopy (PIERS) is a new surface enhanced Raman spectroscopy (SERS) modality with a 680% Raman signal enhancement of adsorbed analytes over that of SERS. Despite the explosion in recent demonstrations, the PIERS mechanism remains undetermined. Using X-ray and time-resolved optical spectroscopies, electron microscopy, cyclic voltammetry, and density functional theory simulations, we elucidate the atomic-scale mechanism behind PIERS. Stable PIERS substrates were fabricated using self-organized arrays of TiO2 nanotubes with controlled oxygen vacancy doping and size-controlled silver nanoparticles. The key source of PIERS vs SERS enhancement is an increase in the Raman polarizability of the adsorbed analyte upon photoinduced charge transfer. A balance between improved crystallinity, which enhances charge transfer due to higher electron mobility but decreases light absorption, and increased oxygen vacancy defect concentration, which increases light absorption, is critical. This work enables the rational design of PIERS substrates for sensing.

Bright and stable perovskite light-emitting diodes in the near-infrared range.

Perovskite light-emitting diodes (LEDs) have attracted broad attention due to their rapidly increasing external quantum efficiencies (EQEs)1-15. However, most high EQEs of perovskite LEDs are reported at low current densities (<1 mA cm-2) and low brightness. Decrease in efficiency and rapid degradation at high brightness inhibit their practical applications. Here, we demonstrate perovskite LEDs with exceptional performance at high brightness, achieved by the introduction of a multifunctional molecule that simultaneously removes non-radiative regions in the perovskite films and suppresses luminescence quenching of perovskites at the interface with charge-transport layers. The resulting LEDs emit near-infrared light at 800 nm, show a peak EQE of 23.8% at 33 mA cm-2 and retain EQEs more than 10% at high current densities of up to 1,000 mA cm-2. In pulsed operation, they retain EQE of 16% at an ultrahigh current density of 4,000 mA cm-2, along with a high radiance of more than 3,200 W s-1 m-2. Notably, an operational half-lifetime of 32 h at an initial radiance of 107 W s-1 m-2 has been achieved, representing the best stability for perovskite LEDs having EQEs exceeding 20% at high brightness levels. The demonstration of efficient and stable perovskite LEDs at high brightness is an important step towards commercialization and opens up new opportunities beyond conventional LED technologies, such as perovskite electrically pumped lasers.

Mixed Small-Molecule Matrices Improve Nanoparticle Dispersibility in Organic Semiconductor-Nanoparticle Films.

Controlling the dispersibility of nanocrystalline inorganic quantum dots (QDs) within organic semiconductor (OSC):QD nanocomposite films is critical for a wide range of optoelectronic devices. This work demonstrates how small changes to the OSC host molecule can have a dramatic detrimental effect on QD dispersibility within the host organic semiconductor matrix as quantified by grazing incidence X-ray scattering. It is commonplace to modify QD surface chemistry to enhance QD dispersibility within an OSC host. Here, an alternative route toward optimizing QD dispersibilities is demonstrated, which dramatically improves QD dispersibilities through blending two different OSCs to form a fully mixed OSC matrix phase.

Triplet transfer from PbS quantum dots to tetracene ligands: is faster always better?

Quantum dot-organic semiconductor hybrid materials are gaining increasing attention as spin mixers for applications ranging from solar harvesting to spin memories. Triplet energy transfer between the inorganic quantum dot (QD) and organic semiconductor is a key step to understand in order to develop these applications. Here we report on the triplet energy transfer from PbS QDs to four energetically and structurally similar tetracene ligands. Even with similar ligands we find that the triplet energy transfer dynamics can vary significantly. For TIPS-tetracene derivatives with carboxylic acid, acetic acid and methanethiol anchoring groups on the short pro-cata side we find that triplet transfer occurs through a stepwise process, mediated via a surface state, whereas for monosubstituted TIPS-tetracene derivative 5-(4-benzoic acid)-12-triisopropylsilylethynyl tetracene (BAT) triplet transfer occurs directly, albeit slower, via a Dexter exchange mechanism. Even though triplet transfer is slower with BAT the overall yield is greater, as determined from upconverted emission using rubrene emitters. This work highlights that the surface-mediated transfer mechanism is plagued with parasitic loss pathways and that materials with direct Dexter-like triplet transfer are preferred for high-efficiency applications.

Efficient vertical charge transport in polycrystalline halide perovskites revealed by four-dimensional tracking of charge carriers.

Fast diffusion of charge carriers is crucial for efficient charge collection in perovskite solar cells. While lateral transient photoluminescence microscopies have been popularly used to characterize charge diffusion in perovskites, there exists a discrepancy between low diffusion coefficients measured and near-unity charge collection efficiencies achieved in practical solar cells. Here, we reveal hidden microscopic dynamics in halide perovskites through four-dimensional (directions x, y and z and time t) tracking of charge carriers by characterizing out-of-plane diffusion of charge carriers. By combining this approach with confocal microscopy, we discover a strong local heterogeneity of vertical charge diffusivities in a three-dimensional perovskite film, arising from the difference between intragrain and intergrain diffusion. We visualize that most charge carriers are efficiently transported through the direct intragrain pathways or via indirect detours through nearby areas with fast diffusion. The observed anisotropy and heterogeneity of charge carrier diffusion in perovskites rationalize their high performance as shown in real devices. Our work also foresees that further control of polycrystal growth will enable solar cells with micrometres-thick perovskites to achieve both long optical path length and efficient charge collection simultaneously.

Ultra-bright, efficient and stable perovskite light-emitting diodes.

Metal halide perovskites are attracting a lot of attention as next-generation light-emitting materials owing to their excellent emission properties, with narrow band emission1-4. However, perovskite light-emitting diodes (PeLEDs), irrespective of their material type (polycrystals or nanocrystals), have not realized high luminance, high efficiency and long lifetime simultaneously, as they are influenced by intrinsic limitations related to the trade-off of properties between charge transport and confinement in each type of perovskite material5-8. Here, we report an ultra-bright, efficient and stable PeLED made of core/shell perovskite nanocrystals with a size of approximately 10 nm, obtained using a simple in situ reaction of benzylphosphonic acid (BPA) additive with three-dimensional (3D) polycrystalline perovskite films, without separate synthesis processes. During the reaction, large 3D crystals are split into nanocrystals and the BPA surrounds the nanocrystals, achieving strong carrier confinement. The BPA shell passivates the undercoordinated lead atoms by forming covalent bonds, and thereby greatly reduces the trap density while maintaining good charge-transport properties for the 3D perovskites. We demonstrate simultaneously efficient, bright and stable PeLEDs that have a maximum brightness of approximately 470,000 cd m-2, maximum external quantum efficiency of 28.9% (average = 25.2 ± 1.6% over 40 devices), maximum current efficiency of 151 cd A-1 and half-lifetime of 520 h at 1,000 cd m-2 (estimated half-lifetime >30,000 h at 100 cd m-2). Our work sheds light on the possibility that PeLEDs can be commercialized in the future display industry.

Elucidating the Role of Antisolvents on the Surface Chemistry and Optoelectronic Properties of CsPbBrxI3-x Perovskite Nanocrystals.

Colloidal lead-halide perovskite nanocrystals (LHP NCs) have emerged over the past decade as leading candidates for efficient next-generation optoelectronic devices, but their properties and performance critically depend on how they are purified. While antisolvents are widely used for purification, a detailed understanding of how the polarity of the antisolvent influences the surface chemistry and composition of the NCs is missing in the field. Here, we fill this knowledge gap by studying the surface chemistry of purified CsPbBrxI3-x NCs as the model system, which in itself is considered a promising candidate for pure-red light-emitting diodes and top-cells for tandem photovoltaics. Interestingly, we find that as the polarity of the antisolvent increases (from methyl acetate to acetone to butanol), there is a blueshift in the photoluminescence (PL) peak of the NCs along with a decrease in PL quantum yield (PLQY). Through transmission electron microscopy and X-ray photoemission spectroscopy measurements, we find that these changes in PL properties arise from antisolvent-induced iodide removal, which leads to a change in halide composition and, thus, the bandgap. Using detailed nuclear magnetic resonance (NMR) and Fourier-transform infrared spectroscopy (FTIR) measurements along with density functional theory calculations, we propose that more polar antisolvents favor the detachment of the oleic acid and oleylamine ligands, which undergo amide condensation reactions, leading to the removal of iodide anions from the NC surface bound to these ligands. This work shows that careful selection of low-polarity antisolvents is a critical part of designing the synthesis of NCs to achieve high PLQYs with minimal defect-mediated phase segregation.

Spontaneous exciton dissociation enables spin state interconversion in delayed fluorescence organic semiconductors.

Engineering a low singlet-triplet energy gap (ΔEST) is necessary for efficient reverse intersystem crossing (rISC) in delayed fluorescence (DF) organic semiconductors but results in a small radiative rate that limits performance in LEDs. Here, we study a model DF material, BF2, that exhibits a strong optical absorption (absorption coefficient = 3.8 × 105 cm-1) and a relatively large ΔEST of 0.2 eV. In isolated BF2 molecules, intramolecular rISC is slow (delayed lifetime = 260 µs), but in aggregated films, BF2 generates intermolecular charge transfer (inter-CT) states on picosecond timescales. In contrast to the microsecond intramolecular rISC that is promoted by spin-orbit interactions in most isolated DF molecules, photoluminescence-detected magnetic resonance shows that these inter-CT states undergo rISC mediated by hyperfine interactions on a ~24 ns timescale and have an average electron-hole separation of ≥1.5 nm. Transfer back to the emissive singlet exciton then enables efficient DF and LED operation. Thus, access to these inter-CT states, which is possible even at low BF2 doping concentrations of 4 wt%, resolves the conflicting requirements of fast radiative emission and low ΔEST in organic DF emitters.

Efficient and Spectrally Stable Blue Perovskite Light-Emitting Diodes Employing a Cationic π-Conjugated Polymer.

Metal halide perovskite semiconductors have demonstrated remarkable potentials in solution-processed blue light-emitting diodes (LEDs). However, the unsatisfied efficiency and spectral stability responsible for trap-mediated non-radiative losses and halide phase segregation remain the primary unsolved challenges for blue perovskite LEDs. In this study, it is reported that a fluorene-based π-conjugated cationic polymer can be blended with the perovskite semiconductor to control film formation and optoelectronic properties. As a result, sky-blue and true-blue perovskite LEDs with Commission Internationale de l'Eclairage coordinates of (0.08, 0.22) and (0.12, 0.13) at the record external quantum efficiencies of 11.2% and 8.0% were achieved. In addition, the mixed halide perovskites with the conjugated cationic polymer exhibit excellent spectral stability under external bias. This result illustrates that π-conjugated cationic polymers have a great potential to realize efficient blue mixed-halide perovskite LEDs with stable electroluminescence.