The role of Pb oxidation state of the precursor in the formation of 2D perovskite microplates.

Two-dimensional (2D) lead halide perovskites are an exciting class of materials currently being extensively explored for photovoltaics and other optoelectronic applications. Their ionic nature makes them ideal candidates for solution processing into both thin films and nanostructured crystals. Understanding how 2D lead halide perovskite crystals form is key towards full control over their physical properties, which may enable new physical phenomena and devices. Here, we investigate the effects of the Pb oxidation state of the initial inorganic precursor on the growth of pure-phase (n = 1) - Popper 2D perovskite BA2PbI4 in single-step synthesis. We examine the different crystallisation routes in exposing PbO2 and PbI2 powders to a BAI : IPA organo-halide solution, by combining in situ optical microscopy, UV-VIS spectroscopy and time-resolved high performance liquid chromatography. So far, works using PbO2 to synthesise 3D LHPs introduce a preceding step to reduce PbO2 into either PbO or PbI2. In this work, we find that BA2PbI4 is directly formed when exposing PbO2 to BAI : IPA without the need for an external reducing agent. We explain this phenomenon by the spontaneous reduction/oxidation of PbO2/BAI that occurs under iodine-rich conditions. We observe differences in the final morphology (rectangles vs. octagons) and nanocrystal growth rate, which we explain through the different chemistry and iodoplumbate complexes involved in each case. As such, this work spans the horizon of usable lead precursors and offers a new turning knob to control crystal growth in single-step LHP synthesis.

Zero-Threshold Optical Gain in Electrochemically Doped Nanoplatelets and the Physics Behind It.

Colloidal nanoplatelets (NPLs) are promising materials for lasing applications. The properties are usually discussed in the framework of 2D materials, where strong excitonic effects dominate the optical properties near the band edge. At the same time, NPLs have finite lateral dimensions such that NPLs are not true extended 2D structures. Here we study the photophysics and gain properties of CdSe/CdS/ZnS core-shell-shell NPLs upon electrochemical n doping and optical excitation. Steady-state absorption and PL spectroscopy show that excitonic effects are weaker in core-shell-shell nanoplatelets due to the decreased exciton binding energy. Transient absorption studies reveal a gain threshold of only one excitation per nanoplatelet. Using electrochemical n doping, we observe the complete bleaching of the band edge exciton transitions. Combining electrochemical doping with transient absorption spectroscopy, we demonstrate that the gain threshold is fully removed over a broad spectral range and gain coefficients of several thousand cm-1 are obtained. These doped NPLs are the best performing colloidal nanomaterial gain medium reported to date, with the lowest gain threshold and broadest gain spectrum and gain coefficients that are 4 times higher than in n-doped colloidal quantum dots. The low exciton binding energy due to the CdS and ZnS shells, in combination with the relatively small lateral size of the NPLs, results in excited states that are effectively delocalized over the entire platelet. Core-shell NPLs are thus on the border between strong confinement in QDs and dominant Coulombic effects in 2D materials. We demonstrate that this limit is in effect ideal for optical gain and that it results in an optimal lateral size of the platelets where the gain threshold per nm2 is minimal.

Extreme-Ultraviolet Excited Scintillation of Methylammonium Lead Bromide Perovskites.

Inorganic-Organic lead halide materials have been recognized as potential high-energy X-ray detectors because of their high quantum efficiencies and radiation hardness. Surprisingly little is known about whether the same is true for extreme-ultraviolet (XUV) radiation, despite applications in nuclear fusion research and astrophysics. We used a table-top high-harmonic generation setup in the XUV range between 20 and 45 eV to photoexcite methylammonium lead bromide (MAPbBr3) and measure its scintillation properties. The strong absorbance combined with multiple carriers being excited per photon yield a very high carrier density at the surface, triggering photobleaching reactions that rapidly reduce the emission intensity. Concurrent to and in spite of this photobleaching, a recovery of the emission intensity as a function of dose was observed. X-ray photoelectron spectroscopy and X-ray diffraction measurements of XUV-exposed and unexposed areas show that this recovery is caused by XUV-induced oxidation of MAPbBr3, which removes trap states that normally quench emission, thus counteracting the rapid photobleaching caused by the extremely high carrier densities. Furthermore, it was found that preoxidizing the sample with ozone was able to prolong and improve this intensity recovery, highlighting the impact of surface passivation on the scintillation properties of perovskite materials in the XUV range.

Nanopatterning of Perovskite Thin Films for Enhanced and Directional Light Emission.

Lead-halide perovskites offer excellent properties for lighting and display applications. Nanopatterning perovskite films could enable perovskite-based devices with designer properties, increasing their performance and adding novel functionalities. We demonstrate the potential of nanopatterning for achieving light emission of a perovskite film into a specific angular range by introducing periodic sol-gel structures between the injection and emissive layer by using substrate conformal imprint lithography (SCIL). Structural and optical characterization reveals that the emission is funnelled into a well-defined angular range by optical resonances, while the emission wavelength and the structural properties of the perovskite film are preserved. The results demonstrate a flexible and scalable approach to the patterning of perovskite layers, paving the way toward perovskite LEDs with designer angular emission patterns.

[Access to medicines for rare diseases: regulatory aspects and public health priorities.] / L'accesso ai farmaci per malattie rare tra aspetti regolatori e priorità di salute pubblica.

INTRODUCTION: In the last decades, the development of drugs for rare diseases has been supported by regulatory and financial incentives. On the other hand, public health policies have increasingly taken into account the person affected by a rare disease in their strategies. In this perspective, we examined the relation between the regulatory framework on rare diseases and the regulatory framework on drug approval. Technical proposals have been brought forward to protect the needs of individuals. RESULTS: The legislative framework on rare diseases has developed both at a European and national level with the aim to strengthen the network of centers for diagnosis and care by increasing the degree of social and health protection, as well as to accelerate the assessment, approval and access to new drugs. Since 2000, 210 orphan drugs have been approved by the European Medicines Agency (EMA) (compared to an estimated 7-8,000 rare diseases). Of the 118 orphan drugs active in the community register as of 2020, 97 (82.2%) were available in Italy: 17 (17.5%) in class A; 58 (59.8%) in class H; 12 (12.4%) in class C; 10 (10.3%) in class C-nn. In 2020, expenditure on drugs with an orphan indication accounted for 6% of the total pharmaceutical expenditure (+47% since 2016). These drugs have benefited from incentives at both European and national levels, as well as inclusion in national early access programs. However, the average duration of the assessment process is above the 100-day limit set by law. DISCUSSION: The legislation on rare diseases has developed in different directions, and drug legislation has undoubtedly played a major role in terms of the results achieved. However, orphan drugs enter the market with a high price, which increasingly represents a problem of sustainability for health systems but notwithstanding Italy shows a high ratio between the level of social protection and access times. In this perspective, it is necessary to be provided with tools for a better system balance with a view to optimize these timeframes. Introducing in Italy a system for tracking the negotiation process that considers the clock stops as the EMA does, would allow to know at what point the negotiation process is. In addition, once the 100-day period is over (net of any clock stops) and in case of failure to reach a negotiation agreement, a second 60-day negotiation round could be proposed and so on. In this way, all the parts involved the system would have a clear scope of action to conclude the process in a flexible but certain timeframe. In this regard, the joint clinical assessments foreseen by the new HTA Regulations provide an additional opportunity to harmonize central decisions with national requirements.

Towards a better understanding of the use of additives in tattoos.

BACKGROUND: Tattooing is a popular practice worldwide, this practice is not free from complications and the last few decades have seen the raising occurrence of complications and adverse reactions. METHODS: The aim of this study is to evaluate which substances are commonly used as additives among a group of tattoo artists working in Florence, to understand if mixing of colors and dilution of inks can be considered a potential source of infection or hypersensitivity reaction. A questionnaire containing a list of substances suspected to be added during the process of tattooing, was administered in presence of an investigator. RESULTS: Forty-one licensed tattoo artists participated in the study. The cosmetic most frequently used as additive, resulted a rinse on cosmetic (36%) followed by distilled water (34%) and hamamelis lotion (17%). CONCLUSIONS: Our study provides new insights about the procedure of ink dilution and mixing of colors, shedding light on the possible risks related to the use of non-sterile products. The results of our study suggest that mixing of colors and ink dilution can be consider a potential source of infection and hypersensitivity reactions. Additional actions are necessary to strengthen and protect public health.

Localization-limited exciton oscillator strength in colloidal CdSe nanoplatelets revealed by the optically induced stark effect.

2D materials are considered for applications that require strong light-matter interaction because of the apparently giant oscillator strength of the exciton transitions in the absorbance spectrum. Nevertheless, the effective oscillator strengths of these transitions have been scarcely reported, nor is there a consistent interpretation of the obtained values. Here, we analyse the transition dipole moment and the ensuing oscillator strength of the exciton transition in 2D CdSe nanoplatelets by means of the optically induced Stark effect (OSE). Intriguingly, we find that the exciton absorption line reacts to a high intensity optical field as a transition with an oscillator strength FStark that is 50 times smaller than expected based on the linear absorption coefficient. We propose that the pronounced exciton absorption line should be seen as the sum of multiple, low oscillator strength transitions, rather than a single high oscillator strength one, a feat we assign to strong exciton center-of-mass localization. Within the quantum mechanical description of excitons, this 50-fold difference between both oscillator strengths corresponds to the ratio between the coherence area of the exciton's center of mass and the total area, which yields a coherence area of a mere 6.1 nm2. Since we find that the coherence area increases with reducing temperature, we conclude that thermal effects, related to lattice vibrations, contribute to exciton localization. In further support of this localization model, we show that FStark is independent of the nanoplatelet area, correctly predicts the radiative lifetime, and lines up for strongly confined quantum dot systems.

Accelerated Hot-Carrier Cooling in MAPbI3 Perovskite by Pressure-Induced Lattice Compression.

Hot-carrier cooling (HCC) in metal halide perovskites above the Mott transition is significantly slower than in conventional semiconductors. This effect is commonly attributed to a hot-phonon bottleneck, but the influence of the lattice properties on the HCC behavior is poorly understood. Using pressure-dependent transient absorption spectroscopy, we find that at an excitation density below the Mott transition, pressure does not affect the HCC. On the contrary, above the Mott transition, HCC in methylammonium lead iodide is around 2-3 times faster at 0.3 GPa than at ambient pressure. Our electron-phonon coupling calculations reveal ∼2-fold stronger electron-phonon coupling for the inorganic cage mode at 0.3 GPa. However, our experiments reveal that pressure promotes faster HCC only above the Mott transition. Altogether, these findings suggest a change in the nature of excited carriers above the Mott transition threshold, providing insights into the electronic behavior of devices operating at such high charge-carrier densities.

Grain Size Influences Activation Energy and Migration Pathways in MAPbBr3 Perovskite Solar Cells.

Ion migration in perovskite layers can significantly reduce the long-term stability of the devices. While perovskite composition engineering has proven an interesting tool to mitigate ion migration, many optoelectronic devices require a specific bandgap and thus require a specific perovskite composition. Here, we look at the effect of grain size to mitigate ion migration. We find that in MAPbBr3 solar cells prepared with grain sizes varying from 2 to 11 µm the activation energy for bromide ion migration increases from 0.17 to 0.28 eV. Moreover, we observe the appearance of a second bromide ion migration pathway for the devices with largest grain size, which we attribute to ion migration mediated by the bulk of the perovskite, as opposed to ion migration mediated by the grain boundaries. Together, these results suggest the beneficial nature of grain engineering for reduction of ion migration in perovskite solar cells.

Analysis of the Introduction in Clinical Practice of New Oral Anticoagulants in Local Health Agency BT: Translation of the Clinical Trial Data to a Local Health Care Area.

The commercial release of the New Oral Anticoagulants (NOACs) has been the most significant change in anticoagulant therapy in recent years. The work aimed to evaluate the economic and health impact for the Local Health Agency Barletta-Andria-Trani (BT). Through the Regional Information System data about naïve patients on NOAC treatment and patients on anti-vitamin-k (VKA), treatments were extrapolated. We assessed therapeutic continuity, pharmaceutical expenditure, hospitalizations, and deaths in 2017 and 2018. Therapeutic continuity was similar in the two groups. The number and the average cost of hospitalizations for a patient treated with VKAs were almost constant, while those of patients treated with NOACs decreased. The treatment of adult-aged naïve patients with NOACs, compared to VKAs therapy, involves an increase in expenditure of about 100€ for a patient, but the reduced hospitalizations could generate, in the long term, saving for the Health System. Clinical data, according to the Real-World Data, confirmed the safety and effectiveness of these drugs. However, attention to the special population is necessary to improve the safety and effectiveness of NOACs. Innovative formulations for pediatric patients are being developed. The challenge for Health Systems is the appropriate use of available resources through health interventions with transversal competences.

Reduced Barrier for Ion Migration in Mixed-Halide Perovskites.

Halide alloying in metal halide perovskites is a useful tool for optoelectronic applications requiring a specific bandgap. However, mixed-halide perovskites show ion migration in the perovskite layer, leading to phase segregation and reducing the long-term stability of the devices. Here, we study the ion migration process in methylammonium-based mixed-halide perovskites with varying ratios of bromide to iodide. We find that the mixed-halide perovskites show two separate halide migration processes, in contrast to pure-phase perovskites, which show only a unique halide migration component. Compared to pure-halide perovskites, these processes have lower activation energies, facilitating ion migration in mixed versus pure-phase perovskites, and have a higher density of mobile ions. Under illumination, we find that the concentration of mobile halide ions is further increased and notice the emergence of a migration process involving methylammonium cations. Quantifying the ion migration processes in mixed-halide perovskites shines light on the key parameters allowing the design of bandgap-tunable perovskite solar cells with long-term stability.

Quantitative Electrochemical Control over Optical Gain in Quantum-Dot Solids.

Solution-processed quantum dot (QD) lasers are one of the holy grails of nanoscience. They are not yet commercialized because the lasing threshold is too high: one needs >1 exciton per QD, which is difficult to achieve because of fast nonradiative Auger recombination. The threshold can, however, be reduced by electronic doping of the QDs, which decreases the absorption near the band-edge, such that the stimulated emission (SE) can easily outcompete absorption. Here, we show that by electrochemically doping films of CdSe/CdS/ZnS QDs, we achieve quantitative control over the gain threshold. We obtain stable and reversible doping of more than two electrons per QD. We quantify the gain threshold and the charge carrier dynamics using ultrafast spectroelectrochemistry and achieve quantitative agreement between experiments and theory, including a vanishingly low gain threshold for doubly doped QDs. Over a range of wavelengths with appreciable gain coefficients, the gain thresholds reach record-low values of ∼1 × 10-5 excitons per QD. These results demonstrate a high level of control over the gain threshold in doped QD solids, opening a new route for the creation of cheap, solution-processable, low-threshold QD lasers.

Engineering the Band Alignment in QD Heterojunction Films via Ligand Exchange.

Colloidal quantum dots (QDs) allow great flexibility in the design of optoelectronic devices, thanks to their size-dependent optical and electronic properties and the possibility to fabricate thin films with solution-based processing. In particular, in QD-based heterojunctions, the band gap of both components can be controlled by varying the size of the QDs. However, control over the band alignment between the two materials is required to tune the dynamics of carrier transfer across a heterostructure. We demonstrate that ligand exchange strategies can be used to control the band alignment of PbSe and CdSe QDs in a mixed QD solid, shifting it from a type-I to a type-II alignment. The change in alignment is observed in both spectroelectrochemical and transient absorption measurements, leading to a change in the energy of the conduction band edges in the two materials and in the direction of electron transfer upon photoexcitation. Our work demonstrates the possibility to tune the band offset of QD heterostructures via control of the chemical species passivating the QD surface, allowing full control over the energetics of the heterostructure without requiring changes in the QD composition.

Electrochemical Modulation of the Photophysics of Surface-Localized Trap States in Core/Shell/(Shell) Quantum Dot Films.

In this work, we systematically study the spectroelectrochemical response of CdSe quantum dots (QDs), CdSe/CdS core/shell QDs with varying CdS shell thicknesses, and CdSe/CdS/ZnS core/shell/shell QDs in order to elucidate the influence of localized surface trap states on the optoelectronic properties. By correlating the differential absorbance and the photoluminescence upon electrochemically raising the Fermi level, we reveal that trap states near the conduction band (CB) edge give rise to nonradiative recombination pathways regardless of the CdS shell thickness, evidenced by quenching of the photoluminescence before the CB edge is populated with electrons. This points in the direction of shallow trap states localized on the CdS shell surface that give rise to nonradiative recombination pathways. We suggest that these shallow trap states reduce the quantum yield because of enhanced hole trapping when the Fermi level is raised electrochemically. We show that these shallow trap states are removed when additional wide band gap ZnS shells are grown around the CdSe/CdS core/shell QDs.

Spectroscopic Evidence for the Contribution of Holes to the Bleach of Cd-Chalcogenide Quantum Dots.

In transient absorption (TA) measurements on Cd-chalcogenide quantum dots (QDs), the presence of a band-edge (BE) bleach signal is commonly attributed entirely to conduction-band electrons in the 1S(e) state, neglecting contributions from BE holes. While this has been the accepted view for more than 20 years, and has often been used to distinguish electron and hole kinetics, the reason for the absence of a hole contribution to the BE-bleach has remained unclear. Here, we show with three independent experiments that holes do in fact have a significant impact on the BE-bleach of well-passivated Cd-chalcogenide QD samples. Transient absorption experiments on high photoluminescence quantum yield CdSe/CdS/ZnS core-shell-shell QDs clearly show an increase of the band-edge bleach as holes cool down to the band edge. The relative contribution of electron-to-hole bleach is 2:1, as predicted by theory. The same measurements on core-only CdSe QDs with a lower quantum yield do not show a contribution of holes to the band-edge bleach. We assign the lack of hole bleach to the presence of ultrafast hole trapping in samples with insufficient passivation of the QD surface. In addition, we show measurements of optical gain in core-shell-shell QD solutions, providing clear evidence of a significant hole contribution to the BE transient absorption signal. Finally, we present spectroelectrochemical measurements on CdTe QDs films, showing the presence of a BE-bleach for both electron and hole injections. The presence of a contribution of holes to the bleach in passivated Cd-chalcogenides QDs bears important implications for quantitative studies on optical gain as well as for TA determinations of carrier dynamics.

Model To Determine a Distinct Rate Constant for Carrier Multiplication from Experiments.

Carrier multiplication (CM) is the process in which multiple electron-hole pairs are created upon absorption of a single photon in a semiconductor. CM by an initially hot charge carrier occurs in competition with cooling by phonon emission, with the respective rates determining the CM efficiency. Up until now, CM rates have only been calculated theoretically. We show for the first time how to extract a distinct CM rate constant from experimental data of the relaxation time of hot charge carriers and the yield of CM. We illustrate this method for PbSe quantum dots. Additionally, we provide a simplified method using an estimated energy loss rate to estimate the CM rate constant just above the onset of CM, when detailed experimental data of the relaxation time is missing.

Highly Photoconductive InP Quantum Dots Films and Solar Cells.

InP and InZnP colloidal quantum dots (QDs) are promising materials for application in light-emitting devices, transistors, photovoltaics, and photocatalytic cells. In addition to possessing an appropriate bandgap, high absorption coefficient, and high bulk carrier mobilities, the intrinsic toxicity of InP and InZnP is much lower than for competing QDs that contain Cd or Pb-providing a potentially safer commercial product. However, compared to other colloidal QDs, InP QDs remain sparsely used in devices and their electronic transport properties are largely unexplored. Here, we use time-resolved microwave conductivity measurements to study charge transport in films of InP and InZnP colloidal quantum dots capped with a variety of short ligands. We find that transport in InP QDs is dominated by trapping effects, which are mitigated in InZnP QDs. We improve charge carrier mobilities with a range of ligand-exchange treatments and for the best treatments reach mobilities and lifetimes on par with those of PbS QD films used in efficient solar cells. To demonstrate the device-grade quality of these films, we construct solar cells based on InP & InZnP QDs with power conversion efficiencies of 0.65 and 1.2%, respectively. This represents a large step forward in developing Cd- and Pb-free next-generation optoelectronic devices.

Spectroelectrochemical Signatures of Surface Trap Passivation on CdTe Nanocrystals.

The photoluminescence (PL) quantum yield of semiconductor nanocrystals (NCs) is hampered by in-gap trap states due to dangling orbitals on the surface of the nanocrystals. While crucial for the rational design of nanocrystals, the understanding of the exact origin of trap states remains limited. Here, we treat CdTe nanocrystal films with different metal chloride salts and we study the effect on their optical properties with in situ spectroelectrochemistry, recording both changes in absorption and photoluminescence. For untreated CdTe NC films we observe a strong increase in the PL intensity as the Fermi-level is raised electrochemically and trap states in the bandgap become occupied with electrons. Upon passivation of these in-gap states we observe an increase in the steady state PL and, for the best treatments, we observe that the PL no longer depends on the position of the Fermi level in the band gap, demonstrating the effective removal of trap states. The most effective treatment is obtained for Z-type passivation with CdCl2, for which the steady state PL increased by a factor 40 and the PL intensity became nearly unaffected by the applied potential. X-ray Photoelectron Spectroscopy measurements show that treatment with ZnCl2 mainly leads to X-type passivation with chloride ions, which increased the PL intensity by a factor four and made the PL less susceptible to modulation by applying a potential with respect to unpassivated nanocrystal films. We elucidate the spectroelectrochemical signatures of trap states within the bandgap and conclude that undercoordinated Te at the surface constitutes the largest contribution to in-gap trap states, but that other surface states that likely originate on Cd atoms should also be considered.

Finding and Fixing Traps in II-VI and III-V Colloidal Quantum Dots: The Importance of Z-Type Ligand Passivation.

Energy levels in the band gap arising from surface states can dominate the optical and electronic properties of semiconductor nanocrystal quantum dots (QDs). Recent theoretical work has predicted that such trap states in II-VI and III-V QDs arise only from two-coordinated anions on the QD surface, offering the hypothesis that Lewis acid (Z-type) ligands should be able to completely passivate these anionic trap states. In this work, we provide experimental support for this hypothesis by demonstrating that Z-type ligation is the primary cause of PL QY increase when passivating undercoordinated CdTe QDs with various metal salts. Optimized treatments with InCl3 or CdCl2 afford a near-unity (>90%) photoluminescence quantum yield (PL QY), whereas other metal halogen or carboxylate salts provide a smaller increase in PL QY as a result of weaker binding or steric repulsion. The addition of non-Lewis acidic ligands (amines, alkylammonium chlorides) systematically gives a much smaller but non-negligible increase in the PL QY. We discuss possible reasons for this result, which points toward a more complex and dynamic QD surface. Finally we show that Z-type metal halide ligand treatments also lead to a strong increase in the PL QY of CdSe, CdS, and InP QDs and can increase the efficiency of sintered CdTe solar cells. These results show that surface anions are the dominant source of trap states in II-VI and III-V QDs and that passivation with Lewis acidic Z-type ligands is a general strategy to fix those traps. Our work also provides a method to tune the PL QY of QD samples from nearly zero up to near-unity values, without the need to grow epitaxial shells.

Hot-electron transfer in quantum-dot heterojunction films.

Thermalization losses limit the photon-to-power conversion of solar cells at the high-energy side of the solar spectrum, as electrons quickly lose their energy relaxing to the band edge. Hot-electron transfer could reduce these losses. Here, we demonstrate fast and efficient hot-electron transfer between lead selenide and cadmium selenide quantum dots assembled in a quantum-dot heterojunction solid. In this system, the energy structure of the absorber material and of the electron extracting material can be easily tuned via a variation of quantum-dot size, allowing us to tailor the energetics of the transfer process for device applications. The efficiency of the transfer process increases with excitation energy as a result of the more favorable competition between hot-electron transfer and electron cooling. The experimental picture is supported by time-domain density functional theory calculations, showing that electron density is transferred from lead selenide to cadmium selenide quantum dots on the sub-picosecond timescale.