A Multicenter Cohort Study on 301 Tissue-Level Implants: Cumulative Implant Survival Rate and Marginal Bone Level Change up to 4.5 Years.

PURPOSE: To retrospectively determine the cumulative survival rate (CSR) and marginal bone level change (ΔMBL) around novel hybrid design tissue-level (TL) dental implants that support multiple-screw-retained restorations. MATERIALS AND METHODS: Implant CSRs were analyzed at the implant and patient level using Kaplan-Meier estimates. ΔMBL was measured by comparing the periapical loading and follow-up visit radiographs using an improved standardized digital methodology based on image gray levels. ΔMBL outcomes were subject to linear mixed regression to identify potential risk factors. RESULTS: A total of 301 TL implants in 69 patients with an average age of 62.6 ± 11.7 years (range: 36 to 87 years) at the time of implant placement were considered for the analysis. All 301 implants were successfully restored and loaded. The 54-month CSRs at the implant and patient levels were 98.9% (95% CI: 96.7 to 99.6) and 95.3% (95% CI: 86.1 to 98.5), respectively. ΔMBL after a mean follow-up of 22 ± 10.7 months after loading was 0.00 ± 0.57 mm. None of the implant sites showed marginal bone loss exceeding 1.5 mm. Multivariate regression analysis revealed a significant association between ΔMBL and the loading protocol (P = .027) but not between ΔMBL and age or transgingival height. CONCLUSIONS: The high CSRs and stable peri-implant marginal bone levels support the use of recent TL implants, which have a hybrid design inherited from the bone-level implant-abutment connection, as a suitable treatment option for restoring partially or fully edentulous patients with a good mid-term prognosis. These results should be complemented by further prospective studies in a real-world multicenter private practice setup that represents the daily realities of implant treatment.

Therapeutic Potential of Chlorhexidine-Loaded Calcium Hydroxide-Based Intracanal Medications in Endo-Periodontal Lesions: An Ex Vivo and In Vitro Study.

Endo-periodontal lesions are challenging clinical situations where both the supporting tissues and the root canal of the same tooth are infected. In the present study, chlorhexidine (CHX)-loaded calcium hydroxide (CH) pastes were used as intracanal medications (ICMs). They were prepared and tested on pathogens found in both the root canal and the periodontal pocket. Exposure to 0.5% and 1% CHX-loaded ICMs decreased the growth of Porphyromonas gingivalis and was effective in eradicating or inhibiting an Enterococcus faecalis biofilm. CH was injected into the root canal of extracted human teeth immersed in deionized water. CHX-loaded ICMs resulted in the transradicular diffusion of active components outside the tooth through the apex and the lateral dentinal tubules, as shown by the release of CHX (from 3.99 µg/mL to 51.28 µg/mL) and changes in pH (from 6.63 to 8.18) and calcium concentrations (from 2.42 ppm to 14.67 ppm) after 7 days. The 0.5% CHX-loaded ICM was non-toxic and reduced the release of IL-6 by periodontal cells stimulated by P. gingivalis lipopolysaccharides. Results indicate that the root canal may serve as a reservoir for periodontal drug delivery and that CHX-based ICMs can be an adjuvant for the control of infections and inflammation in endo-periodontal lesions.

3D Electrospun Polycaprolactone Scaffolds to Assess Human Periodontal Ligament Cells Mechanobiological Behaviour.

While periodontal ligament cells are sensitive to their 3D biomechanical environment, only a few 3D in vitro models have been used to investigate the periodontal cells mechanobiological behavior. The objective of the current study was to assess the capability of a 3D fibrous scaffold to transmit a mechanical loading to the periodontal ligament cells. Three-dimensional fibrous polycaprolactone (PCL) scaffolds were synthetized through electrospinning. Scaffolds seeded with human periodontal cells (103 mL-1) were subjected to static (n = 9) or to a sinusoidal axial compressive loading in an in-house bioreactor (n = 9). At the end of the culture, the dynamic loading seemed to have an influence on the cells' morphology, with a lower number of visible cells on the scaffolds surface and a lower expression of actin filament. Furthermore, the dynamic loading presented a tendency to decrease the Alkaline Phosphatase activity and the production of Interleukin-6 while these two biomolecular markers were increased after 21 days of static culture. Together, these results showed that load transmission is occurring in the 3D electrospun PCL fibrous scaffolds, suggesting that it can be used to better understand the periodontal ligament cells mechanobiology. The current study shows a relevant way to investigate periodontal mechanobiology using 3D fibrous scaffolds.

Amelogenin-Derived Peptide (ADP-5) Hydrogel for Periodontal Regeneration: An In Vitro Study on Periodontal Cells Cytocompatibility, Remineralization and Inflammatory Profile.

A relevant alternative to enamel matrix derivatives from animal origin could be the use of synthetic amelogenin-derived peptides. This study aimed to assess the effect of a synthetic amelogenin-derived peptide (ADP-5), alone or included in an experimental gellan-xanthan hydrogel, on periodontal cell behavior (gingival fibroblasts, periodontal ligament cells, osteoblasts and cementoblasts). The effect of ADP-5 (50, 100, and 200 µg/mL) on cell metabolic activity was examined using Alamar blue assay, and cell morphology was assessed by confocal imaging. An experimental gellan-xanthan hydrogel was then designed as carrier for ADP-5 and compared to the commercial gel Emdogain®. Alizarin Red was used to determine the periodontal ligament and cementoblasts cell mineralization. The inflammatory profile of these two cells was also quantified using ELISA (vascular endothelial growth factor A, tumor necrosis factor α, and interleukin 11) mediators. ADP-5 enhanced cell proliferation and remineralization; the 100 µg/mL concentration was more efficient than 50 and 200 µg/mL. The ADP-5 experimental hydrogel exhibited equivalent good biological behavior compared to Emdogain® in terms of cell colonization, mineralization, and inflammatory profile. These findings revealed relevant insights regarding the ADP-5 biological behavior. From a clinical perspective, these outcomes could instigate the development of novel functionalized scaffold for periodontal regeneration.

Periodontal Diseases and COVID-19: A Scoping Review.

The aim of this scoping review was to present the existing literature regarding the relationship between periodontal diseases and coronavirus disease 2019 (COVID-19). The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) extension for scoping review guidelines was followed. Articles were retrieved from PubMed/MEDLINE and Scopus databases and screened to include studies relating severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) or COVID-19 to periodontal cells and/or tissues and/or diseases. Twenty-five papers were included; consisting of six reviews, seven original articles, six short reports, four letters to the editor, one commentary, and one case report. The articles were allocated to three different topics: (i) hypotheses on the relationship between periodontal diseases and COVID-19; (ii) risk factors and comorbidities common to periodontitis and COVID-19; (iii) periodontal manifestations of COVID-19. Certain molecules (angiotensin-converting enzyme-2, furin, cathepsin, TMPRSS2...) that are found at a high level in periodontal tissues, particularly in patients with periodontitis, are involved in the mechanism of entry of SARS-CoV-2 into cells. Periodontopathic bacteria could also play a direct role in the mechanism of entry of SARS-CoV-2 by cleaving the S-protein, and the cytokines produced during periodontitis could add to the cytokine storm found in the severe forms of COVID-19. It thus appears that the treatment of periodontitis, which allows a reduction in periodontopathic bacteria and of the local and systemic inflammation state, could be part of a strategy to prevent the development of severe forms of COVID-19.

Histologic and histomorphometric evaluation of new zirconia-based ceramic dental implants: A preclinical study in dogs.

OBJECTIVE: Healing of soft tissues and improvement of aesthetics have become major research objectives in implantology and renewed the interest for ceramics implants. The aim of this study was to evaluate the pre-clinical performance of screw-shaped sandblasted-etched implants processed from an innovative zirconia-based ceramic composite, in comparison to titanium. METHODS: Twenty-four ceramic and twenty-four titanium screw-shaped sandblasted-etched dental implants were tested in a split-mouth design in six Beagle dogs. Surface topographies were investigated by confocal microscopy. Local tissue effects were evaluated at 4 and 13 weeks after implantation through histology. An ANOVA statistical analysis (5% risk; p < 0.05) was performed to compare peri-implant quantitative histomorphometric parameters on buccal and lingual sides, including Bone to Implant Contact (BIC) among test groups and time-periods. RESULTS: Titanium and ceramic implants presented respectively moderate and minimal roughness. After 4 and 13 weeks, ceramic implants showed an inflammatory tissue response close to titanium implants. At both period of time there was no significant difference between the titanium and ceramic groups in terms of BIC values (mean ± SD) at the lingual or buccal sides or when combining buccal + lingual BIC values (respectively for titanium and ceramic, 68.4 ± 14.7 % and 75.0 ± 13.5 % at 4 weeks, and 92.0 ± 8.6 % and 86.1 ± 13.8 % at 13 weeks). SIGNIFICANCE: Within the limits of the present study, it can be concluded that newly developed zirconia-based ceramic composite dental implants have similar biocompatibility and osseointegration to those observed in titanium implants. These pre-clinical results corroborate the potential for the use of these new zirconia-based ceramics in oral implantology.

Effect of periodontal treatment on the glomerular filtration rate, reduction of inflammatory markers and mortality in patients with chronic kidney disease: A systematic review.

AIM: To assess the effect of periodontal treatment (PT) on glomerular filtration rate (GFR), systemic inflammation, or mortality in patients with chronic kidney disease (CKD). METHODS: A literature search was performed on PubMed and Web of Science databases on articles published until December 2019. The PRISMA guidelines were used throughout the manuscript. RESULTS: Of the total studies found, only 18 met the inclusion criteria; four retrospective and 14 prospective studies (including 3 randomized controlled trials-RCT). After PT, 3 studies investigated GFR, 2 found significant improvement; 11 (including 2 RCTs) investigated C-reactive protein levels, 9 found a significant improvement (including the 2 RCTs); 5 (including 3 RCTs) investigated Interleukine-6 level, 4 found a significant improvement (including 2 RCTs) and 2 studies evaluated mortality, one (retrospective study) found a significant difference. CONCLUSIONS: Within the limitations of the present study, PT seems to improve CKD status, especially by reducing the systemic inflammation. Further RCTs are needed to confirm the results and specifically assess the influence of different types of PT in CKD patients. Taking into consideration the ability of PT to prevent further tooth loss and denutrition, early management of periodontitis is extremely important in patients with impaired renal function.

GoPerio - impact of a personalized video and an automated two-way text-messaging system in oral hygiene motivation: study protocol for a randomized controlled trial.

BACKGROUND: Oral hygiene is of paramount importance for the preservation of oral health, and for patients affected by periodontal disease establishing an effective oral hygiene routine is the first step of therapy. Several clinical frameworks have been developed to foster behavior change, such as motivational interviewing. However, two obstacles can be identified. First, patients tend to forget the advice they were given during the consultation. Second, it is hard to maintain motivation in the long term, thus leading to relapse. An innovative eHealth solution was designed with the aim to tackle both obstacles and supplement the current clinical standard of care. The primary objective is to compare the full mouth plaque scores of study groups (eHealth plus standard of care versus standard of care only) at 8 weeks of follow up. The main secondary objective is to compare the full mouth bleeding score at 8 weeks of follow up. METHODS/DESIGN: The "GoPerio" study is a multicenter, randomized, controlled trial assessing the impact of a novel eHealth concept for oral hygiene motivation (personalized video of oral hygiene routine available for the patient via a cloud server plus interactive text messages) in addition to the current standard of care (motivational interviewing plus tooth scaling and polishing). The minimum sample size required is 86 patients. Participants will be randomized (allocation ratio 1:1): test group (eHealth plus standard of care) versus control group (standard of care only). The primary outcome is oral hygiene as measured by the full mouth (six sites per tooth) plaque control record (PCR) index. The main secondary outcome is gingival inflammation as measured by the full mouth (six sites per tooth) bleeding on probing (BOP) index. Both the primary and the main secondary outcomes are evaluated by blinded and calibrated examiners at 8 weeks of follow up. The other secondary outcomes are patient satisfaction and patient behavior change and motivation. DISCUSSION: The study will investigate the value of an innovative eHealth approach to strengthen patient motivation for oral hygiene. If proven effective, such an approach would supplement the current clinical standard of care, resulting in improved clinical outcomes with negligible impact on productivity in a dental practice. TRIAL REGISTRATION: ClinicalTrials.gov, NCT03109808. Registered on 12 April 2017. SPONSOR: Hospices Civils de Lyon. BP 2251, 3 quai des Célestins, 69,229 Lyon cedex 02. Protocol version: 1.0 as of 21 September 2016.

Cellular and collagen reference values of gingival and periodontal ligament tissues in rats: a pilot study.

Reference data are lacking on the periodontal ligament and the gingival tissue of the rat model, which would be useful for studies of new medical or biomaterial periodontal treatments. The objective of the current study was to propose cellular and collagen reference values of gingival and periodontal ligament tissues in rat, using a simple and reliable quantitative method after decalcification. Mandibular samples of ten adult Sprague-Dawley rats were used. Mild decalcification was carried out using ethylenediaminetetraacetic acid (EDTA) to preserve the morphology of tissues. Half of the samples were decalcified and the other half were not. The gingiva and the periodontal ligament were analyzed. Descriptive histology and computer-assisted image analysis were performed. The data showed that qualitatively, cellular and extracellular matrix morphologies were well preserved compared to non-decalcified periodontal soft tissue biopsies. Histomorphometrically, constitutive cellularity and the total amount of native collagen, collagen directionality and collagen anisotropy in both experimental conditions did not significantly differ. Taken together, these results suggested that EDTA decalcification did not negatively affect the studied endpoints. Moreover, this mild decalcification method allowed in situ maintenance of the periodontal soft and hard tissue integrity. The structural and compositional computerized assessment performed in the healthy periodontal soft tissue could provide reference values that will be required for future assessment on the effects of pathological, reparative and regenerative processes in rat periodontal soft tissues.

Sol-gel bioglasses in dental and periodontal regeneration: A systematic review.

Due to their osteoconductive and osteoinductive abilities, bioglasses (BGs) have attracted attention in tissue engineering, especially for mineralized tissue. The aim of this study is to review the current state of the art on the effects of BGs produced by sol-gel on cells for dental and periodontal regeneration. The study also discusses associated antibacterial properties. The research was performed by considering the Preferred Reporting Items for Systematic Reviews and the Meta-Analyses (PRISMA) statement. The research ranged 5 years' window time (from January, 01, 2012, to August, 31, 2017) and the relevant studies were identified based on the inclusion/exclusion criteria. A total of 45 articles were selected from 244 initial returns, plus seven further articles coming from other sources were selected for the same purpose. From this systematic study, it is revealed that only 13 of the 52 articles have proved both the ability of BGs to differentiate dental cells at genetic level and their ability of triggering cell-mediated mineralization, but only six of them showed, along with cells, the antibacterial properties of the glasses. This review shows that sol-gel BGs are not toxic, can sustain cell proliferation and differentiation at a genetic level, and can keep the bacterial population under control. Moreover, a standard methodology and an ideal material are suggested. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1210-1227, 2019.

Bioactivity evaluation of collagen-based scaffolds containing a series of Sr-doped melt-quench derived phosphate-based glasses.

Phosphate-based glasses have been attracting attention due to their possible medical applications arising from unique dissolution characteristics in the human body leading to the possibility of new tissue regeneration. In this study, the leaching kinetics of a series of melt-quenched Sr-doped phosphate glasses are presented. Regardless of the presence of Sr, all the glasses have an initial linear and sustained release of the ions followed by a plateau. To guarantee proper nutritional support to the growing tissue during regeneration and to mimic the 3-dimensional architecture of tissues, organic scaffold systems have been developed. However, their poor mechanical strength has limited their application. To overcome this problem, cross-linkers can be used although this then limits the solubility of the materials. To succeed in dealing with such a limitation, in this paper, by freeze-drying, the aforementioned soluble melt-quenched phosphate glasses were combined as powders with collagen fibres from bovine achilles tendon to make degradable scaffolds. The scaffolds were characterized by SEM, EDX and BET. Changes to the dissolution behaviour of the glasses arising from the presence of collagen interacting with the ions leached were reported. Furthermore, the ability of the scaffolds to induce hydroxyapatite (HA) formation was evaluated: one the elaborated scaffold could grow an HA-like layer after a week in SBF. Based on the results obtained, a possible application in restorative dentistry is proposed for one or more materials.

Devising tissue ingrowth metrics: a contribution to the computational characterization of engineered soft tissue healing.

The paradigm shift brought about by the expansion of tissue engineering and regenerative medicine away from the use of biomaterials, currently questions the value of histopathologic methods in the evaluation of biological changes. To date, the available tools of evaluation are not fully consistent and satisfactory for these advanced therapies. We have developed a new, simple and inexpensive quantitative digital approach that provides key metrics for structural and compositional characterization of the regenerated tissues. For example, metrics provide the tissue ingrowth rate (TIR) which integrates two separate indicators; the cell ingrowth rate (CIR) and the total collagen content (TCC) as featured in the equation, TIR% = CIR% + TCC%. Moreover a subset of quantitative indicators describing the directional organization of the collagen (relating structure and mechanical function of tissues), the ratio of collagen I to collagen III (remodeling quality) and the optical anisotropy property of the collagen (maturity indicator) was automatically assessed as well. Using an image analyzer, all metrics were extracted from only two serial sections stained with either Feulgen & Rossenbeck (cell specific) or Picrosirius Red F3BA (collagen specific). To validate this new procedure, three-dimensional (3D) scaffolds were intraperitoneally implanted in healthy and in diabetic rats. It was hypothesized that quantitatively, the healing tissue would be significantly delayed and of poor quality in diabetic rats in comparison to healthy rats. In addition, a chemically modified 3D scaffold was similarly implanted in a third group of healthy rats with the assumption that modulation of the ingrown tissue would be quantitatively present in comparison to the 3D scaffold-healthy group. After 21 days of implantation, both hypotheses were verified by use of this novel computerized approach. When the two methods were run in parallel, the quantitative results revealed fine details and differences not detected by the semi-quantitative assessment, demonstrating the importance of quantitative analysis in the performance evaluation of soft tissue healing. This automated and supervised method reduced operator dependency and proved to be simple, sensitive, cost-effective and time-effective. It supports objective therapeutic comparisons and helps to elucidate regeneration and the dynamics of a functional tissue.

Improvements in Resolution of Additive Manufacturing: Advances in Two-Photon Polymerization and Direct-Writing Electrospinning Techniques.

In recent years, additive manufacturing (AM) technologies have attracted significant interest in many industrial and research fields, particularly in tissue engineering. Printed structures used as physical and bioactive supports for tissue regeneration are becoming increasingly complex so as to mimic natural tissues in order to answer future medical needs. Reproducing the biological environment of a native tissue from the microscopic to the macroscopic scale appears to be the best strategy for effective regeneration. Recent advances in AM have led to the production of scaffolds designed with a high precision. This Review presents results concerning two AM technologies which enable the highest accuracy of scaffold design to be obtained, with a precision down to the nanoscale. The first technique is based on a two-photon polymerization (TPP) process, while the other is based on a direct-writing electrospinning (DWES) system. Here, we present an overview of the fabrication mechanisms, the final scaffold properties, and their applications in tissue engineering. The production of highly resolved structures offers new possibilities for studying cell behavior in a controlled environment and also for adjusting the desired scaffold properties to address current and future needs in tissue engineering. The current technical limitations and future challenges are thus also discussed in this Review.

The use of FDI criteria in clinical trials on direct dental restorations: A scoping review.

OBJECTIVES: A scoping review was conducted to explore the use of FDI criteria 10 years after their introduction. The first aim was to compare the amount of studies using the FDI and/or the modified USPHS criteria. The second aim was to analyse the use of the FDI criteria in clinical trials evaluating direct dental restorations. DATA: Listing of studies using FDI and/or USPHS criteria per year since 2007. Clinical studies related to the assessment of direct restorations using FDI criteria. SOURCE: Two systematic searches - regarding the use of FDI and modified USPHS criteria - were carried out on Medline/Pubmed in order to identify the studies published between 2007 and 2017. Authors of the included articles were contacted to clarify their choice of FDI criteria in their studies. ClinicalTrials.gov database was also queried for the on-going studies that use FDI and modified USPHS criteria. STUDY SELECTION: In the first review, all the clinical trials (randomized/non-randomized, controlled, prospective/retrospective studies) that used FDI criteria to evaluate direct restorations on primary or permanent teeth were included. CONCLUSIONS: 16.3% of the studies used FDI criteria. The percentage of studies using them increased from 4.5% in 2010 to 50.0% in 2016. In average, 8.5 FDI criteria were used. The most employed criteria were: marginal adaptation (96.7%), staining (90.0%), fracture of material and retention (90.0%), recurrence of caries/erosion/abfraction (90.0%), post-operative sensitivity/tooth vitality (86.7%) and surface luster (60.0%). In addition, among the 27 on-going studies from ClinicalTrials.gov database, 51.9% use FDI criteria (including 87.5% with an open recruitment status). CLINICAL SIGNIFICANCE: FDI criteria were reported as practical (various and freely selectable), relevant (sensitive as well as appropriate to current restorative materials and clinical studies design), standardized (making comparisons between investigations easier). Investigators should go on using them for a better standardization of their clinical judgment, allowing comparisons with other studies.

FTIR microscopy contribution for comprehension of degradation mechanisms in PLA-based implantable medical devices.

The integration and evolution of implantable medical devices made of bioresorbable polymers and used for temporary biomedical applications are crucial criteria in the success of a therapy and means of follow-up after implantation are needed. The objective of this work is to develop and evaluate a method based on microscopic Fourier Transform InfraRed spectroscopy (FTIR) mappings to monitor the degradation of such polymers on tissue explant sections, after implantation. This technique provided information on their location and on both their composition and crystallinity, which is directly linked to their state of degradation induced predominantly by chain scissions. An in vitro study was first performed on poly(L-lactic acid) (PLLA) meshes to validate the procedure and the assumption that changes observed on FTIR spectra are indeed a consequence of degradation. Then, mappings of in vivo degraded PLLA meshes were realized to follow up their degradation and to better visualize their degradation mechanisms. This work further warrants its translation to medical implants made of copolymers of lactic acid and to other polyesters.

One-step partial or complete caries removal and bonding with antibacterial or traditional self-etch adhesives: study protocol for a randomized controlled trial.

BACKGROUND: Current concepts in conservative dentistry advocate minimally invasive dentistry and pulp vitality preservation. Moreover, complete removal of carious dentin in deep carious lesions often leads to pulp exposure and root canal treatment, despite the absence of irreversible pulp inflammation. For years, partial caries removal has been performed on primary teeth, but little evidence supports its effectiveness for permanent teeth. Furthermore, the recent development of new antibacterial adhesive systems could be interesting in the treatment of such lesions. The objectives of this study are to compare the effectiveness of partial versus complete carious dentin removal in deep lesions (primary objective) and the use of an antibacterial versus a traditional two-step self-etch adhesive system (main secondary objective). METHODS/DESIGN: The DEep CAries Treatment (DECAT) study protocol is a multicenter, randomized, controlled superiority trial comparing partial versus complete caries removal followed by adhesive restoration. The minimum sample size required is 464 patients. Two successive randomizations will be performed (allocation ratio 1:1): the first for the type of excavation (partial versus complete) and the second (if no root canal treatment is required) for the type of adhesive (antibacterial versus traditional). For the two objectives, the outcome is the success of the treatment after 1 year, measured according to a composite outcome of five FDI criteria: material fracture and retention, marginal adaptation, radiographic examination (including apical pathologies), postoperative sensitivity and tooth vitality, and carious lesion recurrence. DISCUSSION: The study will investigate the interest of a conservative approach for the management of deep carious lesions in terms of dentin excavation and bioactive adhesive systems. The results may help practitioners achieve the most efficient restorative procedure to maintain pulp vitality and increase the restoration longevity. TRIAL REGISTRATION: ClinicalTrials.gov Identifier NCT02286388 . Registered in November 2014.

A chitosan-hyaluronic acid hydrogel scaffold for periodontal tissue engineering.

The current challenge in treating periodontitis is regenerating the periodontium. This motivates tissue-engineering researchers to develop scaffolds as artificial matrices that give mechanical support for osteoblasts, cementoblasts, gingival and periodontal ligament fibroblast cells. In this study, modified hyaluronic acid (HA) and chitosan (CS) were employed to create a hybrid CS-HA hydrogel scaffold for periodontal regeneration. CS, HA, and CS-HA scaffolds were obtained by freeze-drying technique, resulting in porous structures suitable for use in tissue engineering. Scaffolds were submitted to gamma and UV-sterilization without significant morphology changes. The ATR-FTIR spectra of CS-HA hydrogels showed peaks at 377 cm-1 , 1566 cm-1 , and 1614 cm-1 , representing secondary amide, primary amine, and carboxyl acid respectively, and it was also observed the emergence of peaks at 886 cm-1 , which probably represents the Schiff base formed in the case of hybrid CS-HA hydrogels. The scaffolds presented a high rate of PBS uptake, reaching values higher than 95%. Thermal degradation of HA scaffolds was around 225°C and CS was around 285°C. The ATR-FTIR spectra and swelling degree were slightly disturbed mainly after gamma sterilization, but degradation temperature did not change after sterilization. The performance of the CS-HA hydrogel scaffolds for in vitro cell culture was tested using NIH3T3 and MG63 cell lines. The Alamar Blue test showed a significant increase in cellular viability and high CD44 expression, suggesting that the cells migrated more when seeded onto the scaffolds. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1691-1702, 2016.

Computerized histomorphometric study of the splenic collagen polymorphism: A control-tissue for polarization microscopy.

Previous articles have pointed out the presence of type III collagen within the extracellular structure of the parenchymatous organs. This study aimed to quantitatively characterize the collagen polymorphism at the capsule and parenchymal trabeculae of the largest lymphoid organ of the body i.e., the spleen, in mouse, rat, and rabbit models. Following a Picrosirius Red-Polarization procedure and computer assisted image analysis of paraffin sections, the results showed (1) a predominant and significantly higher amount of type III collagen in the trabeculae area compared to the capsule area in the three species, (2) no statistical difference among the three species concerning the parenchymal collagen polymorphism or the type I/type III collagen ratio, (3) a heterogeneous type I/type III collagen ratio varying from 0.86 (mouse) to 6.62 (rabbit) in the fibromuscular capsule region. A qualitative analysis corroborated these histomorphometric results. In conclusion, the spleen may be used as (1) a control tissue to qualitatively visualize type I and III collagen under polarization microscopy and to validate the quality of PSR staining (2) an aid to accurately calibrate the angle of polarization before quantitative measurements of type I and type III collagen. Among the studied species, the rabbit spleen appeared to be the most appropriate control tissue as it showed the highest amount of type I collagen in the capsule and a similarly high amount of type III collagen in the parenchymal trabeculae.

Confocal time lapse imaging as an efficient method for the cytocompatibility evaluation of dental composites.

It is generally accepted that in vitro cell material interaction is a useful criterion in the evaluation of dental material biocompatibility. The objective of this study was to use 3D CLSM time lapse confocal imaging to assess the in vitro biocompatibility of dental composites. This method provides an accurate and sensitive indication of viable cell rate in contact with dental composite extracts. The ELS extra low shrinkage, a dental composite used for direct restoration, has been taken as example. In vitro assessment was performed on cultured primary human gingival fibroblast cells using Live/Dead staining. Images were obtained with the FV10i confocal biological inverted system and analyzed with the FV10-ASW 3.1 Software. Image analysis showed a very slight cytotoxicity in the presence of the tested composite after 5 hours of time lapse. A slight decrease of cell viability was shown in contact with the tested composite extracts compared to control cells. The findings highlighted the use of 3D CLSM time lapse imaging as a sensitive method to qualitatively and quantitatively evaluate the biocompatibility behavior of dental composites.

Surface Entrapment of Fibronectin on Electrospun PLGA Scaffolds for Periodontal Tissue Engineering.

Nowadays, the challenge in the tissue engineering field consists in the development of biomaterials designed to regenerate ad integrum damaged tissues. Despite the current use of bioresorbable polyesters such as poly(l-lactide) (PLA), poly(d,l-lactide-co-glycolide) (PLGA), and poly-ɛ-caprolactone in soft tissue regeneration researches, their hydrophobic properties negatively influence the cell adhesion. Here, to overcome it, we have developed a fibronectin (FN)-functionalized electrospun PLGA scaffold for periodontal ligament regeneration. Functionalization of electrospun PLGA scaffolds was performed by alkaline hydrolysis (0.1 or 0.01 M NaOH). Then, hydrolyzed scaffolds were coated by simple deposition of an FN layer (10 µg/mL). FN coating was evidenced by X-ray photoelectron analysis. A decrease of contact angle and greater cell adhesion to hydrolyzed, FN-coated PLGA scaffolds were noticed. Suitable degradation behavior without pH variations was observed for all samples up to 28 days. All treated materials presented strong shrinkage, fiber orientation loss, and collapsed fibers. However, functionalization process using 0.01 M NaOH concentration resulted in unchanged scaffold porosity, preserved chemical composition, and similar mechanical properties compared with untreated scaffolds. The proposed simplified method to functionalize electrospun PLGA fibers is an efficient route to make polyester scaffolds more biocompatible and shows potential for tissue engineering.