RESUMEN
The extracellular matrix presents spatially varying physical cues that can influence cell behavior in many processes. Physical gradients within hydrogels that mimic the heterogenous mechanical microenvironment are useful to study the impact of these cues on cellular responses. Therefore, simple and reliable techniques to create such gradient hydrogels are highly desirable. This work demonstrates the fabrication of stiffness gradient Gellan gum (GG) hydrogels by applying a temperature gradient across a microchannel containing hydrogel precursor solution. Thermophoretic migration of components within the precursor solution generates a concentration gradient that mirrors the temperature gradient profile, which translates into mechanical gradients upon crosslinking. Using this technique, GG hydrogels with stiffness gradients ranging from 20 to 90 kPa over 600µm are created, covering the elastic moduli typical of moderately hard to hard tissues. MC3T3 osteoblast cells are then cultured on these gradient substrates, which exhibit preferential migration and enhanced osteogenic potential toward the stiffest region on the gradient. Overall, the thermophoretic approach provides a non-toxic and effective method to create hydrogels with defined mechanical gradients at the micron scale suitable forin vitrobiological studies and potentially tissue engineering applications.
Asunto(s)
Hidrogeles , Microfluídica , Ingeniería de Tejidos/métodos , Matriz ExtracelularRESUMEN
The presence of CD8+ T cells in the cytoplasm of biliary epithelial cells (BEC) has been correlated with biliary damage associated with primary biliary cholangitis (PBC). Here, we characterise the mechanism of CD8+ T cell invasion into BEC. CD8+ T cells observed within BEC were large, eccentric, and expressed E-cadherin, CD103 and CD69. They were also not contained within secondary vesicles. Internalisation required cytoskeletal rearrangements which facilitated contact with BEC. Internalised CD8+ T cells were observed in both non-cirrhotic and cirrhotic diseased liver tissues but enriched in PBC patients, both during active disease and at the time of transplantation. E-cadherin expression by CD8+ T cells correlated with frequency of internalisation of these cells into BEC. E-cadherin+ CD8+ T cells formed ß-catenin-associated interactions with BEC, were larger than E-cadherin- CD8+ T cells and invaded into BEC more frequently. Overall, we unveil a distinct cell-in-cell structure process in the liver detailing the invasion of E-cadherin+ CD103+ CD69+ CD8+ T cells into BEC.
Asunto(s)
Conductos Biliares , Cirrosis Hepática Biliar , Humanos , Conductos Biliares/metabolismo , Cirrosis Hepática Biliar/patología , Linfocitos T CD8-positivos/metabolismo , Células Epiteliales/metabolismo , Cadherinas/metabolismoRESUMEN
Climate change is a threat to human health and wellbeing across the world. In recent years, there has been a surge in awareness of this crisis, leading to many countries and organisations setting "net-zero" targets. This entails minimising carbon emissions and neutralising remaining emissions by removing carbon from the atmosphere. At the 2022 United Nations Climate Change Conference (COP27), commitments to transition away from fossil fuels and augment climate targets were underwhelming. It is therefore imperative for public and private sector organisations to demonstrate successful implementation of net-zero and set a precedent for the global political consensus. As a top 10 world employer, the United Kingdom National Health Service (NHS) has pledged to reach net-zero by 2045. The NHS has already taken positive steps forward, but its scale and complexity as a health system means stakeholders in each of its services must highlight the specifications for further progress. Dry eye disease is a chronic illness with an estimated global prevalence of 29.5% and an environmentally damaging care pathway. Moreover, environmental damage is a known aggravator of dry eye disease. Worldwide management of this illness generates copious amounts of non-recyclable waste, utilises inefficient supply chains and involves recurrent follow-up appointments and prescriptions. By mapping the dry eye disease care pathway to environmental impact, in this review we will highlight seven key areas in which reduced emissions and pollution could be targeted. Examining these approaches for improved environmental sustainability is critical in driving the transformation needed to preserve our health and wellbeing.
Asunto(s)
Contaminación del Aire , Humanos , Medicina Estatal , Vías Clínicas , Reino Unido , CarbonoRESUMEN
Heterotopic ossification (HO), the pathological formation of bone in soft tissues, is a debilitating condition, as well as one of the few instances of de novo bone formation in adults. Chemical mapping of HO tissue showed distinct islands of calcium phosphate within phosphate-deficient, calcium-rich regions, suggesting a transition to apatitic bone mineral from a non-phosphatic precursor. The transition of amorphous calcium carbonate (ACC), a generally suggested bone-mineral precursor, in physiological conditions was thus investigated. Here, we show that adenosine triphosphate (ATP), present in high amounts in forming bone, stabilised ACC for weeks in physiological conditions and that enzymatic degradation of ATP triggered rapid crystallisation into apatite, through an amorphous calcium phosphate phase. It is suggested that this localised enzymatic degradation could explain the chemical heterogeneity seen in HO and may also represent a pathway to physiological bone mineralisation.
RESUMEN
The use of granular matrices to support parts during the bioprinting process was first reported by Bhattacharjee et al. in 2015, and since then, several approaches have been developed for the preparation and use of supporting gel beds in 3D bioprinting. This paper describes a process to manufacture microgel suspensions using agarose (known as fluid gels), wherein particle formation is governed by the application of shear during gelation. Such processing produces carefully defined microstructures, with subsequent material properties that impart distinct advantages as embedding print media, both chemically and mechanically. These include behaving as viscoelastic solid-like materials at zero shear, limiting long-range diffusion, and demonstrating the characteristic shear-thinning behavior of flocculated systems. On the removal of shear stress, however, fluid gels have the capacity to rapidly recover their elastic properties. This lack of hysteresis is directly linked to the defined microstructures previously alluded to; because of the processing, reactive, non-gelled polymer chains at the particle interface facilitate interparticle interactions-similar to a Velcro effect. This rapid recovery of elastic properties enables bioprinting high-resolution parts from low-viscosity biomaterials, as rapid reformation of the support bed traps the bioink in situ, maintaining its shape. Furthermore, an advantage of agarose fluid gels is the asymmetric gelling/melting transitions (gelation temperature of ~30 °C and melting temperature of ~90 °C). This thermal hysteresis of agarose makes it possible to print and culture the bioprinted part in situ without the supporting fluid gel melting. This protocol shows how to manufacture agarose fluid gels and demonstrates their use to support the production of a range of complex hydrogel parts within suspended-layer additive manufacture (SLAM).
Asunto(s)
Bioimpresión , Sefarosa , Lechos , Materiales Biocompatibles , DifusiónRESUMEN
Major achievements in bone research have always relied on animal models and in vitro systems derived from patient and animal material. However, the use of animals in research has drawn intense ethical debate and the complete abolition of animal experimentation is demanded by fractions of the population. This phenomenon is enhanced by the reproducibility crisis in science and the advance of in vitro and in silico techniques. 3D culture, organ-on-a-chip, and computer models have improved enormously over the last few years. Nevertheless, the overall complexity of bone tissue cross-talk and the systemic and local regulation of bone physiology can often only be addressed in entire vertebrates. Powerful genetic methods such as conditional mutagenesis, lineage tracing, and modeling of the diseases enhanced the understanding of the entire skeletal system. In this review endorsed by the European Calcified Tissue Society (ECTS), a working group of investigators from Europe and the US provides an overview of the strengths and limitations of experimental animal models, including rodents, fish, and large animals, as well the potential and shortcomings of in vitro and in silico technologies in skeletal research. We propose that the proper combination of the right animal model for a specific hypothesis and state-of-the-art in vitro and/or in silico technology is essential to solving remaining important questions in bone research. This is crucial for executing most efficiently the 3R principles to reduce, refine, and replace animal experimentation, for enhancing our knowledge of skeletal biology, and for the treatment of bone diseases that affect a large part of society. © 2023 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).
Asunto(s)
Experimentación Animal , Enfermedades Óseas , Animales , Reproducibilidad de los Resultados , Modelos Animales , HuesosRESUMEN
Microfluidics have transformed diagnosis and screening in regenerative medicine. Recently, they are showing much promise in biofabrication. However, their adoption is inhibited by costly and drawn-out lithographic processes thus limiting progress. Here, multi-material fibers with complex core-shell geometries with sizes matching those of human arteries and arterioles are fabricated employing versatile microfluidic devices produced using an agile and inexpensive manufacturing pipeline. The pipeline consists of material extrusion additive manufacturing with an innovative continuously varied extrusion (CONVEX) approach to produce microfluidics with complex seamless geometries including, novel variable-width zigzag (V-zigzag) mixers with channel widths ranging from 100-400 µm and hydrodynamic flow-focusing components. The microfluidic systems facilitated rapid mixing of fluids by decelerating the fluids at specific zones to allow for increased diffusion across the interfaces. Better mixing even at high flow rates (100-1000 µL min-1 ) whilst avoiding turbulence led to high cell cytocompatibility (>86%) even when 100 µm nozzles are used. The presented 3D-printed microfluidic system is versatile, simple and efficient, offering a great potential to significantly advance the microfluidic platform in regenerative medicine.
Asunto(s)
Dispositivos Laboratorio en un Chip , Microfluídica , Humanos , Medicina Regenerativa , Impresión Tridimensional , HidrodinámicaRESUMEN
Introduction: For decades, functional primary human osteocyte cultures have been crucially needed for understanding their role in bone anabolic processes and in endocrine phosphate regulation via the bone-kidney axis. Mature osteocyte proteins (sclerostin, DMP1, Phex and FGF23) play a key role in various systemic diseases and are targeted by successful bone anabolic drugs (anti-sclerostin antibody and teriparatide (PTH1-34)). However, cell lines available to study osteocytes produce very little sclerostin and low levels of mature osteocyte markers. We have developed a primary human 3D organotypic culture system that replicates the formation of mature osteocytes in bone. Methods: Primary human osteoblasts were seeded in a fibrinogen / thrombin gel around 3D-printed hanging posts. Following contraction of the gel around the posts, cells were cultured in osteogenic media and conditioned media was collected for analysis of secreted markers of osteocyte formation. Results: The organoids were viable for at least 6 months, allowing co-culture with different cell types and testing of bone anabolic drugs. Bulk RNAseq data displayed the developing marker trajectory of ossification and human primary osteocyte formation in vitro over an initial 8- week period. Vitamin D3 supplementation increased mineralization and sclerostin secretion, while hypoxia and PTH1-34 modulated sclerostin. Our culture system also secreted FGF23, enabling the future development of a bone-kidney-parathyroid-vascular multi-organoid or organ-on-a-chip system to study disease processes and drug effects using purely human cells. Discussion: This 3D organotypic culture system provides a stable, long-lived, and regulated population of mature human primary osteocytes for a variety of research applications.
Asunto(s)
Sistemas Microfisiológicos , Osteocitos , Humanos , Organoides , Osteoblastos , Transporte BiológicoRESUMEN
[This corrects the article DOI: 10.1063/5.0061361.].
RESUMEN
Advances in bioprinting have enabled the fabrication of complex tissue constructs with high speed and resolution. However, there remains significant structural and biological complexity within tissues that bioprinting is unable to recapitulate. Bone, for example, has a hierarchical organization ranging from the molecular to whole organ level. Current bioprinting techniques and the materials employed have imposed limits on the scale, speed, and resolution that can be achieved, rendering the technique unable to reproduce the structural hierarchies and cell-matrix interactions that are observed in bone. The shift toward biomimetic approaches in bone tissue engineering, where hydrogels provide biophysical and biochemical cues to encapsulated cells, is a promising approach to enhancing the biological function and development of tissues for in vitro modeling. A major focus in bioprinting of bone tissue for in vitro modeling is creating dynamic microenvironmental niches to support, stimulate, and direct the cellular processes for bone formation and remodeling. Hydrogels are ideal materials for imitating the extracellular matrix since they can be engineered to present various cues whilst allowing bioprinting. Here, recent advances in hydrogels and 3D bioprinting toward creating a microenvironmental niche that is conducive to tissue engineering of in vitro models of bone are reviewed.
Asunto(s)
Bioimpresión , Ingeniería de Tejidos , Ingeniería de Tejidos/métodos , Hidrogeles/química , Bioimpresión/métodos , Huesos , Osteogénesis , Andamios del Tejido/química , Impresión TridimensionalRESUMEN
Augmenting the vascular supply to generate new tissues, a crucial aspect in regenerative medicine, has been challenging. Recently, our group showed that calcium phosphate can induce the formation of a functional neo-angiosome without the need for microsurgical arterial anastomosis. This was a preclinical proof of concept for biomaterial-induced luminal sprouting of large-diameter vessels. In this study, we investigated if sprouting was a general response to surgical injury or placement of an inorganic construct around the vessel. Cylindrical biocement scaffolds of differing chemistries were placed around the femoral vein. A contrast agent was used to visualize vessel ingrowth into the scaffolds. Cell populations in the scaffold were mapped using immunohistochemistry. Calcium phosphate scaffolds induced 2.7-3 times greater volume of blood vessels than calcium sulphate or magnesium phosphate scaffolds. Macrophage and vSMC populations were identified that changed spatially and temporally within the scaffold during implantation. NLRP3 inflammasome activation peaked at weeks 2 and 4 and then declined; however, IL-1ß expression was sustained over the course of the experiment. IL-8, a promoter of angiogenesis, was also detected, and together, these responses suggest a role of sterile inflammation. Unexpectedly, the effect was distinct from an injury response as a result of surgical placement and also was not simply a foreign body reaction as a result of placing a rigid bioceramic next to a vein, since, while the materials tested had similar microstructures, only the calcium phosphates tested elicited an angiogenic response. This finding then reveals a potential path towards a new strategy for creating better pro-regenerative biomaterials.
RESUMEN
Background: There are insufficient in vitro bone models that accommodate long-term culture of osteoblasts and support their differentiation to osteocytes. The increased demand for effective therapies for bone diseases, and the ethical requirement to replace animals in research, warrants the development of such models.Here we present an in-depth protocol to prepare, create and maintain three-dimensional, in vitro, self-structuring bone models that support osteocytogenesis and long-term osteoblast survival (>1 year). Methods: Osteoblastic cells are seeded on a fibrin hydrogel, cast between two beta-tricalcium phosphate anchors. Analytical methods optimised for these self-structuring bone model (SSBM) constructs, including RT-qPCR, immunofluorescence staining and XRF, are described in detail. Results: Over time, the cells restructure and replace the initial matrix with a collagen-rich, mineralising one; and demonstrate differentiation towards osteocytes within 12 weeks of culture. Conclusions: Whilst optimised using a secondary human cell line (hFOB 1.19), this protocol readily accommodates osteoblasts from other species (rat and mouse) and origins (primary and secondary). This simple, straightforward method creates reproducible in vitro bone models that are responsive to exogenous stimuli, offering a versatile platform for conducting preclinical translatable research studies.
RESUMEN
Additive manufacturing (AM) has emerged as a disruptive technique within healthcare because of its ability to provide personalized devices; however, printed metal parts still present surface and microstructural defects, which may compromise mechanical and biological interactions. This has made physical and/or chemical postprocessing techniques essential for metal AM devices, although limited fundamental knowledge is available on how alterations in physicochemical properties influence AM biological outcomes. For this purpose, herein, powder bed fusion Ti-6Al-4V samples were postprocessed with three industrially relevant techniques: polishing, passivation, and vibratory finishing. These surfaces were thoroughly characterized in terms of roughness, chemistry, wettability, surface free energy, and surface ζ-potential. A significant increase in Staphylococcus epidermidis colonization was observed on both polished and passivated samples, which was linked to high surface free energy donor γ- values in the acid-base, γAB component. Early osteoblast attachment and proliferation (24 h) were not influenced by these properties, although increased mineralization was observed for both these samples. In contrast, osteoblast differentiation on stainless steel was driven by a combination of roughness and chemistry. Collectively, this study highlights that surface free energy is a key driver between AM surfaces and cell interactions. In particular, while low acid-base components resulted in a desired reduction in S. epidermidis colonization, this was followed by reduced mineralization. Thus, while surface free energy can be used as a guide to AM device development, optimization of bacterial and mammalian cell interactions should be attained through a combination of different postprocessing techniques.
Asunto(s)
Aleaciones , Acero Inoxidable , Animales , Mamíferos , Polvos , Titanio/químicaRESUMEN
Nanostructured, inorganic microspheres have many industrial applications, including catalysis, electronics, and particularly drug delivery, with several advantages over their organic counterparts. However, many current production methods require high energy input, use of harmful chemicals, and extensive processing. Here, the self-assembly of calcium pyrophosphate into nanofibre microspheres is reported. This process takes place at ambient temperature, with no energy input, and only salt water as a by-product. The formation of these materials is examined, as is the formation of nanotubes when the system is agitated, from initial precipitate to crystallisation. A mechanism of formation is proposed, whereby the nanofibre intermediates are formed as the system moves from kinetically favoured spheres to thermodynamically stable plates, with a corresponding increase in aspect ratio. The functionality of the nanofibre microspheres as targeted enteric drug delivery vehicles is then demonstrated in vitro and in vivo, showing that the microspheres can pass through the stomach while protecting the activity of a model protein, then release their payload in intestinal conditions.
Asunto(s)
Nanoestructuras , Nanotubos , Pirofosfato de Calcio , Microesferas , Nanotubos/química , ProteínasRESUMEN
The adaptive foam reticulation technique combines the foam reticulation and freeze casting methodologies of fabricating bone reparative scaffolds to offer a potential alternative to autografts. For the first time this paper studies the effect of processing on the mechanical properties and in-vitro cell growth of controllably generating a hierarchical structure of macro- (94 ± 6 to 514 ± 36 µm) and microporosity (2-30 µm) by the inclusion of camphene as a porogen during processing. Scaffolds were produced with porogen additions of 0-25 wt%. Porosity values of the structures of 85-96% were determined using the Archimedes technique and verified using X-ray Computed Tomography. The strength of the hydroxyapatite scaffolds, 5.70 ± 1.0 to 159 ± 61 kPa, correlated to theoretically determined values, 3.71 ± 0.8 to 134 ± 12 kPa, calculated by the novel incorporation of a shape factor into a standard equation. Fibroblast (3T3) and pre-osteoblast (MC3T3) cell growth was found to be significantly (P < 0.005) improved using 25 wt% porogen. This was supported by increased levels of alkaline phosphatase and was thought to result from greater dissolution as quantified by increased calcium levels in incubating media. The combination of these properties renders adaptive foam reticulation-fabricated scaffolds suitable for non-structural bone regenerative applications in non-load bearing bone defects.
Asunto(s)
Regeneración Ósea , Andamios del Tejido , Huesos , Durapatita/química , Porosidad , Andamios del Tejido/químicaRESUMEN
SurgihoneyRO™ (SHRO) is a bioengineered medicinal honey proven to eradicate multi-drug resistant strains of bacteria by delivering a controlled dose of reactive oxygen species (ROS). The urgent need for novel antimicrobial therapies capable of tackling pathogens that have developed resitance to existing antimicrobial medicines, such as antibiotics, makes SHRO a highly desirable biomaterial. However, its application is currently limited in the medical field due to undesirable material properties. This study aims to formulate the honey into a clinically viable topical cream whilst maintaining antimicrobial efficacy. SHRO droplets were emulsified to protect the active until activation in-situ. Xanthan gum (XG) and fumed silica (FS) thickener systems were explored, with both formulations able to inhibit the growth of S. aureus in-vitro. However, FS formulations exhibited significantly higher hydrogen peroxide release over a period of 7 days and resulted in larger zones of inhibition (42%) than XG formulations. Selection of the optimum FS formulation was made based on evaluation of the material characteristics by means of rheology and texture analysis. In place of the sticky and highly viscous initial SHRO product, desirable material characteristics for a topical product were achieved, including thixotropic shear-thinning behaviour and significantly lower cohesiveness (15.3-22.4 N) than standard SHRO formulations (79.9 N). Furthermore, the product exhibited a low contact angle on porcine skin, indicating that these formulations would spread favourably on the skin surface, demonstrate a favourable sensory perception and be retained on the skin, making for a more clinically effective product. This work is the first report of an engineered cream system to controllably deliver ROS to a wound site and demonstrate its ability of eradicating clinically relevant bacteria in vitro.
Asunto(s)
Antiinfecciosos , Miel , Antibacterianos/farmacología , Antiinfecciosos/farmacología , Emolientes/farmacología , Especies Reactivas de Oxígeno/farmacología , Staphylococcus aureusRESUMEN
Structured fluid biomaterials, including gels, creams, emulsions and particle suspensions, are used extensively across many industries, including great interest within the medical field as controlled release vehicles to improve the therapeutic benefit of delivered drugs and cells. Colloidal forces within these materials create multiscale cohesive interactions, giving rise to intricate microstructures and physical properties, exemplified by increasingly complex mathematical descriptions. Yield stresses and viscoelasticity, typically arising through the material microstructure, vastly improve site-specific retention, and protect valuable therapeutics during application. One powerful application route is spraying, a convenient delivery method capable of applying a thin layer of material over geometrically uneven surfaces and hard-to-reach anatomical locations. The process of spraying is inherently disruptive, breaking a bulk fluid in successive steps into smaller elements, applying multiple forces over several length scales. Historically, spray research has focused on simple, inviscid solutions and dispersions, far from the complex microstructures and highly viscoelastic properties of concentrated colloidal biomaterials. The cohesive forces in colloidal biomaterials appear to conflict with the disruptive forces that occur during spraying. This review explores the physical bass and mathematical models of both the multifarious material properties engineered into structured fluid biomaterials and the disruptive forces imparted during the spray process, in order to elucidate the challenges and identify opportunities for rational design of sprayable, structured fluid biomaterials.
RESUMEN
Skin exhibits a complex structure consisting of three predominant layers (epidermis, dermis, and hypodermis). Extensive trauma may result in the loss of these structures and poor repair, in the longer term, forming scarred tissue and associated reduction in function. Although a number of skin replacements exist, there have been no solutions that recapitulate the chemical, mechanical, and biological roles that exist within native skin. This study reports the use of suspended layer additive manufacturing to produce a continuous tri-layered implant, which closely resembles human skin. Through careful control of the bioink composition, gradients (chemical and cellular) were formed throughout the printed construct. Culture of the model demonstrated that over 21 days, the cellular components played a key role in remodeling the supporting matrix into architectures comparable with those of healthy skin. Indeed, it has been demonstrated that even at seven days post-implantation, the integration of the implant had occurred, with mobilization of the adipose tissue from the surrounding tissue into the construct itself. As such, it is believed that these implants can facilitate healing, commencing from the fascia, up toward the skin surface-a mechanism recently shown to be key within deep wounds.
RESUMEN
The World Health Organisation has called for a 40% increase in personal protective equipment manufacturing worldwide, recognising that frontline workers need effective protection during the COVID-19 pandemic. Current devices suffer from high fit-failure rates leaving significant proportions of users exposed to risk of viral infection. Driven by non-contact, portable, and widely available 3D scanning technologies, a workflow is presented whereby a user's face is rapidly categorised using relevant facial parameters. Device design is then directed down either a semi-customised or fully-customised route. Semi-customised designs use the extracted eye-to-chin distance to categorise users in to pre-determined size brackets established via a cohort of 200 participants encompassing 87.5% of the cohort. The user's nasal profile is approximated to a Gaussian curve to further refine the selection in to one of three subsets. Flexible silicone provides the facial interface accommodating minor mismatches between true nasal profile and the approximation, maintaining a good seal in this challenging region. Critically, users with outlying facial parameters are flagged for the fully-customised route whereby the silicone interface is mapped to 3D scan data. These two approaches allow for large scale manufacture of a limited number of design variations, currently nine through the semi-customised approach, whilst ensuring effective device fit. Furthermore, labour-intensive fully-customised designs are targeted as those users who will most greatly benefit. By encompassing both approaches, the presented workflow balances manufacturing scale-up feasibility with the diverse range of users to provide well-fitting devices as widely as possible. Novel flow visualisation on a model face is presented alongside qualitative fit-testing of prototype devices to support the workflow methodology.