RESUMEN
Understanding the interplay between the kinetics and energetics of photophysical processes in perovskite-chromophore hybrid systems is crucial for realizing their potential in optoelectronics, photocatalysis, and light-harvesting applications. By combining steady-state optical characterizations and transient absorption spectroscopy, we have investigated the mechanism of interfacial charge transfer (CT) between colloidal CsPbBr3 nanoplatelets (NPLs) and surface-anchored perylene derivatives and have explored the possibility of controlling the CT rate by tuning the driving force. The CT driving force was tuned systematically by attaching acceptors with different electron affinities and by varying the bandgap of NPLs via thickness-controlled quantum confinement. Our data show that the charge-separated state is formed by selectively exciting either the electron donors or acceptors in the same system. Upon exciting attached acceptors, hole transfer from perylene derivatives to CsPbBr3 NPLs takes place on a picosecond time scale, showing an energetic behavior in line with the Marcus normal regime. Interestingly, such energetic behavior is absent upon exciting the electron donor, suggesting that the dominant CT mechanism is energy transfer followed by ultrafast hole transfer. Our findings not only elucidate the photophysics of perovskite-molecule systems but also provide guidelines for tailoring such hybrid systems for specific applications.
RESUMEN
Spatiotemporal pH imaging using fluorescence lifetime imaging microscopy (FLIM) is an excellent technique for investigating dynamic (electro)chemical processes. However, probes that are responsive at high pH values are not available. Here, we describe the development and application of dedicated pH probes based on the 1-methyl-7-amino-quinolinium fluorophore. The high fluorescence lifetime and quantum yield, the high (photo)stability, and the inherent water solubility make the quinolinium fluorophore well suited for the development of FLIM probes. Due to the flexible fluorophore-spacer-receptor architecture, probe lifetimes are tunable in the pH range between 5.5 and 11. An additional fluorescence lifetime response, at tunable pH values between 11 and 13, is achieved by deprotonation of the aromatic amine at the quinolinium core. Probe lifetimes are hardly affected by temperature and the presence of most inorganic ions, thus making FLIM imaging highly reliable and convenient. At 0.1 mM probe concentrations, imaging at rates of 3 images per second, at a resolution of 4 µm, while measuring pH values up to 12 is achieved. This enables the pH imaging of dynamic electrochemical processes involving chemical reactions and mass transport.
Asunto(s)
Colorantes Fluorescentes , Imagen Óptica , Microscopía Fluorescente/métodos , Concentración de Iones de Hidrógeno , AguaRESUMEN
A series of three perylenemonoimide-p-oligophenylene-dimethylaniline molecular dyads undergo photoinduced charge separation (CS) with anomalous distance dependence as a function of increasing donor-acceptor (DA) distances. A comprehensive experimental and computational investigation of the photodynamics in the donor-bridge-acceptor (DBA) chromophores reveals a clear demarcation concerning the nature of the CS accessed at shorter (bridgeless) and longer DA distances. At the shortest distance, a strong DA interaction and ground-state charge delocalization populate a hot excited state (ES) with prominent charge transfer (CT) character, via Franck-Condon vertical excitation. The presence of such a CT-polarized hot ES enables a subpicosecond CS in the bridgeless dyad. The incorporation of the p-oligophenylene bridge effectively decouples the donor and the acceptor units in the ground state and consequentially suppresses the CT polarization in the hot ES. Theoretically, this should render a slower CS at longer distances. However, the transient absorption measurement reveals a fast CS process at the longer distance, contrary to the anticipated exponential distance dependence of the CS rates. A closer look into the excited-state dynamics suggests that the hot ES undergoes ultrafast geometry relaxation (τ < 1 ps) to create a relaxed ES. As compared to a decoupled, twisted geometry in the hot ES, the geometry of the relaxed ES exhibits a more planar conformation of the p-oligophenylene bridges. Planarization of the bridge endorses an increased charge delocalization and a prominent CT character in the relaxed ES and forms the origin for the evident fast CS at the longest distance. Thus, the relaxation of the hot ES and the concomitantly enhanced charge delocalization adds a new caveat to the classic nature of distance-dependent CS in artificial DBA chromophores and recommends a cautious treatment of the attenuation factor (ß) while discussing anomalous CS trends.
RESUMEN
One of the most promising properties of lead halide perovskite nanocrystals (NCs) is their defect tolerance. It is often argued that, due to the electronic structure of the conduction and valence bands, undercoordinated ions can only form localized levels inside or close to the band edges (i.e., shallow traps). However, multiple studies have shown that dangling bonds on surface Br- can still create deep trap states. Here, we argue that the traditional picture of defect tolerance is incomplete and that deep Br- traps can be explained by considering the local environment of the trap states. Using density functional theory calculations, we show that surface Br- sites experience a destabilizing local electrostatic potential that pushes their dangling orbitals into the bandgap. These deep trap states can be electrostatically passivated through the addition of ions that stabilize the dangling orbitals via ionic interactions without covalently binding to the NC surface. These results shed light on the formation of deep traps in perovskite NCs and provide strategies to remove them from the bandgap.
RESUMEN
Donor-bridge-acceptor systems based on boron dipyrromethene (BODIPY) are attractive candidates for bio-imagining and sensing applications because of their sensitivity to temperature, micro-viscosity and solvent polarity. The optimization of the properties of such molecular sensors requires a detailed knowledge of the relation between the structure and the photophysical behavior in different environments. In this work we have investigated the excited-state dynamics of three acceptor-donor-acceptor molecules based on benzodithiophene and BODIPY in solvents of different polarities using a combination of ultrafast spectroscopy and DFT-based electronic structure calculations. Transient absorption spectra show that upon photoexcitation an initial excited species with an induced absorption band in the near-infrared regime is formed independent of the solvent polarity. The subsequent photophysical processes strongly depend on the solvent polarity. In non-polar toluene this initial excited state undergoes a structural relaxation leading to a delocalized state with partial charge transfer character, while in the more polar tetrahydrofuran a fully charge separated state is formed. The results clearly show how factors such as donor-acceptor distance and restricted rotational motion by steric hindrance can be used to tune the excited state photophysics to optimize such systems for specific applications.
RESUMEN
Structure-property relationships of donor-π-acceptor (D-π-A) type molecular dyad (pp-AD) and triads (pp-ADA and Me-pp-ADA) based on benzodithiophene and BODIPY with biphenyl spacers have been reported. Rotors pp-AD and pp-ADA showed efficient twisted intramolecular charge transfer (TICT) with near infrared (NIR) emissions at â¼712 nm and â¼725 nm with (pseudo-)Stokes shifts of â¼208 nm and â¼221 nm, respectively, and prominent solvatochromism. A structurally similar triad, Me-pp-ADA, with tetramethyl substituents on the BODIPY core instead was TICT inactive and exhibited excitation energy transfer with a transfer efficiency of â¼88% as revealed using steady state emission and transient absorption measurements. Rotors pp-AD and pp-ADA showed NIR emission with an enhancement in intensity with the addition of water in THF solution as well as a pronounced change in emission intensity with temperature and viscosity variations, which justify their utility as temperature and viscosity sensors. Furthermore, the linear correlation of lifetime with fluorescence intensity ratios of the donor and acceptor justifies the rigidochromic behaviour of these rotors.
RESUMEN
Recently two-dimensional (2D) hybrid organic-inorganic perovskites have attracted a lot of interest as more stable analogues of their three-dimensional counterparts for optoelectronic applications. However, a thorough understanding of the effect that this reduced dimensionality has on dynamical and structural behavior of individual parts of the perovskite is currently lacking. We have used molecular dynamics simulations to investigate the structure and dynamics of 2D Ruddlesden-Popper perovskite with the general formula BA2MA n-1Pb n I3n+1, where BA is butylammonium, MA is methylammonium, and n is the number of lead-iodide layers. We discuss the dynamic behavior of both the inorganic and the organic part and compare between the different 2D structures. We show that the rigidness of the inorganic layer markedly increases with the number of lead-iodide layers and that low-temperature structural phase changes accompanied by tilting of the octahedra occurs in some but not all structures. Furthermore, the dynamic behavior of the MA ion is significantly affected by the number of inorganic layers, involving changes both in the reorientation times and in the occurrence of specific preferred orientations.
RESUMEN
Directing energy and charge transfer processes in light-harvesting antenna systems is quintessential for optimizing the efficiency of molecular devices for artificial photosynthesis. In this work, we report a novel synthetic method to construct two regioisomeric antenna molecules (1-D2A2 and 7-D2A2), in which the 4-(n-butylamino)naphthalene monoimide energy and electron donor is attached to the perylene monoimide diester (PMIDE) acceptor at the 1- and 7-bay positions, respectively. The non-symmetric structure of PMIDE renders a polarized distribution of the frontier molecular orbitals along the long axis of this acceptor moiety, which differentiates the electron coupling between the donor, attached at either the 1- or the 7-position, and the acceptor. We demonstrate that directional control of the photo-driven charge transfer process has been obtained by engineering the molecular structure of the light-harvesting antenna molecules.
Asunto(s)
Naftalimidas/química , Perileno/análogos & derivados , Transferencia de Energía , Luz , Naftalimidas/síntesis química , Naftalimidas/efectos de la radiación , Perileno/efectos de la radiación , Electricidad EstáticaRESUMEN
In recent years, a wide range of single-molecule devices has been realized, enabled by technological advances combined with the versatility offered by synthetic chemistry. In particular, single-molecule diodes have attracted significant attention with an ongoing effort to increase the rectification ratio between the forward and reverse current. Various mechanisms have been investigated to improve rectification, either based on molecule-intrinsic properties or by engineering the coupling of the molecule to the electrodes. In this perspective, we first provide an overview of the current experimental approaches reported in literature to achieve rectification at the single-molecule level. We then proceed with our recent efforts in this direction, exploiting the internal structure of multi-site molecules, yielding the highest rectification ratio based on a molecule-intrinsic mechanism. We introduce the theoretical framework for multi-site molecules and infer general design guidelines from this. Based on these guidelines, a series of two-site molecules have been developed and integrated into devices. Using two- and three-terminal mechanically controllable break junction measurements, we show that depending on the on-site energies, which are tunable by chemical design, the devices either exhibit pronounced negative differential conductance, or behave as highly-efficient rectifiers. Finally, we propose a design of a single-molecule diode with a theoretical rectification ratio exceeding a million.
RESUMEN
Metal-halide perovskite nanocrystals show promise as the future active material in photovoltaics, lighting, and other optoelectronic applications. The appeal of these materials is largely due to the robustness of the optoelectronic properties to structural defects. The photoluminescence quantum yield (PLQY) of most types of perovskite nanocrystals is nevertheless below unity, evidencing the existence of nonradiative charge-carrier decay channels. In this work, we experimentally elucidate the nonradiative pathways in CsPbBr3 nanoplatelets, before and after chemical treatment with PbBr2 that improves the PLQY. A combination of picosecond streak camera and nanosecond time-correlated single-photon counting measurements is used to probe the excited-state dynamics over 6 orders of magnitude in time. We find that up to 40% of the nanoplatelets from a synthesis batch are entirely nonfluorescent and cannot be turned fluorescent through chemical treatment. The other nanoplatelets show fluorescence, but charge-carrier trapping leads to losses that are prevented by chemical treatment. Interestingly, even without chemical treatment, some losses due to trapping are mitigated because trapped carriers spontaneously detrap on nanosecond-to-microsecond timescales. Our analysis shows that multiple nonradiative pathways are active in perovskite nanoplatelets, which are affected differently by chemical treatment with PbBr2. More generally, our work highlights that in-depth studies using a combination of techniques are necessary to understand nonradiative pathways in fluorescent nanocrystals. Such understanding is essential to optimize synthesis and treatment procedures.
RESUMEN
In this work we demonstrate a novel approach to achieve efficient charge separation in dimensionally and dielectrically confined two-dimensional perovskite materials. Two-dimensional perovskites generally exhibit large exciton binding energies that limit their application in optoelectronic devices that require charge separation such as solar cells, photo-detectors and in photo-catalysis. Here, we show that by incorporating a strongly electron accepting moiety, perylene diimide organic chromophores, on the surface of the two-dimensional perovskite nanoplatelets it is possible to achieve efficient formation of mobile free charge carriers. These free charge carriers are generated with ten times higher yield and lifetimes of tens of microseconds, which is two orders of magnitude longer than without the peryline diimide acceptor. This opens a novel synergistic approach, where the inorganic perovskite layers are combined with functional organic chromophores in the same material to tune the properties for specific applications.
RESUMEN
Two light-harvesting antenna molecules were obtained by positioning naphthalene monoimide energy donors at the imide position, instead of the bay positions, of perylene imide energy acceptors. Such rational design resulted in a complete suppression of parasitic intramolecular charge transfer without compromising the desired ultrafast rates of excitation energy transfer.
RESUMEN
In this contribution we demonstrate a solid-state approach to triplet-triplet annihilation upconversion for application in a solar cell device in which absorption of near-infrared light is followed by direct electron injection into an inorganic substrate. We use time-resolved microwave photoconductivity experiments to study the injection of electrons into the electron-accepting substrate (TiO2) in a trilayer device consisting of a triplet sensitizer (fluorinated zinc phthalocyanine), triplet acceptor (methyl subsituted perylenediimide), and smooth polycrystalline TiO2. Absorption of light at 700 nm leads to the almost quantitative generation of triplet excited states by intersystem crossing. This is followed by Dexter energy transfer to the triplet acceptor layer where triplet annihilation occurs and concludes by injection of an electron into TiO2 from the upconverted singlet excited state.
RESUMEN
Two-dimensional (2D) hybrid perovskites make up an emerging class of materials for optoelectronic applications in which inorganic octahedral layers are separated by nonconductive large organic cations. This leads to a high-dimensional and dielectric confinement and hence a high exciton binding energy, which severely limits their application in devices in which charge carrier separation is required. In this work, we achieve improved charge separation by replacing nonconductive organic cations with organic charge-transfer complexes consisting of a pyrene donor and a tetracyanoquinodimethane acceptor. Steady-state absorption measurements show that these materials exhibit optical features that match with the absorption of the organic charge-transfer complexes. Using microwave conductivity and femtosecond transient absorption, we show that photoexcitation of these charge-transfer states leads to long-lived mobile charges in the inorganic layers. While the efficiency of charge separation is relatively low, these experiments demonstrate that it is possible to induce charge separation in solid-state 2D perovskites by engineering the organic layer.
RESUMEN
Two-dimensional (2D) hybrid organic-inorganic perovskites are an interesting class of semi-conducting materials. One of their main advantages is the large freedom in the nature of the organic spacer molecules that separates the individual inorganic layers. The nature of the organic layer can significantly affect the structure and dynamics of the 2D material; however, there is currently no clear understanding of the effect of the organic component on the structural parameters. In this work, we have used molecular dynamics simulations to investigate the structure and dynamics of a 2D Ruddlesden-Popper perovskite with a single inorganic layer (n = 1) and varying organic cations. We discuss the dynamic behavior of both the inorganic and the organic part of the materials as well as the interplay between the two and compare the different materials. We show that both aromaticity and the length of the flexible linker between the aromatic unit and the amide have a clear effect on the dynamics of both the organic and the inorganic part of the structures, highlighting the importance of the organic cation in the design of 2D perovskites.
RESUMEN
Formamidinium (FA) lead iodide perovskite materials feature promising photovoltaic performances and superior thermal stabilities. However, conversion of the perovskite α-FAPbI3 phase to the thermodynamically stable yet photovoltaically inactive δ-FAPbI3 phase compromises the photovoltaic performance. A strategy is presented to address this challenge by using low-dimensional hybrid perovskite materials comprising guaninium (G) organic spacer layers that act as stabilizers of the three-dimensional α-FAPbI3 phase. The underlying mode of interaction at the atomic level is unraveled by means of solid-state nuclear magnetic resonance spectroscopy, X-ray crystallography, transmission electron microscopy, molecular dynamics simulations, and DFT calculations. Low-dimensional-phase-containing hybrid FAPbI3 perovskite solar cells are obtained with improved performance and enhanced long-term stability.
RESUMEN
Two of the key parameters that characterize the usefulness of organic semiconductors for organic or hybrid organic/inorganic solar cells are the mobility of charges and the diffusion length of excitons. Both parameters are strongly related to the supramolecular organization in the material. In this work we have investigated the relation between the solid-state molecular packing and the exciton diffusion length, charge carrier mobility, and charge carrier separation yield using two perylene diimide (PDI) derivatives which differ in their substitution. We have used the time-resolved microwave photoconductivity technique and measured charge carrier mobilities of 0.32 and 0.02 cm2/(Vs) and determined exciton diffusion lengths of 60 and 18 nm for octyl- and bulky hexylheptyl-imide substituted PDIs, respectively. This diffusion length is independent of substrate type and aggregate domain size. The differences in charge carrier mobility and exciton diffusion length clearly reflect the effect of solid-state packing of PDIs on their optoelectronic properties and show that significant improvements can be obtained by effectively controlling the solid-state packing.
RESUMEN
Singlet fission (SF) involves the conversion of one excited singlet state into two lower excited triplet states and has received considerable renewed attention over the past decade. This Perspective highlights recent developments and emerging concepts of SF in solid-state crystalline materials. Recent experiments showed the crucial role of vibrational modes in speeding up SF, and theoretical modeling has started to define an optimal energetic landscape and intermolecular orientation of chromophores for highly efficient singlet fission. A critical analysis of these developments leads to directions for future research to eventually find singlet fission chromophores with excellent optoelectronic properties.
RESUMEN
Perylene diimides (PDIs) are attractive chromophores that exhibit singlet exciton fission (SF) and have several advantages over traditional SF molecules such as tetracene and pentacene; however, their photophysical properties relating to SF have received only limited attention. In this study, we explore how introduction of bulky bromine atoms in the so-called bay-area PDIs, resulting in a nonplanar structure, affects the solid-state packing and efficiency of singlet fission. We found that changes in the molecular packing have a strong effect on the temperature dependent photoluminescence, expressed as an activation energy. These effects are explained in terms of excimer formation for PDIs without bay-area substitution, which competes with singlet fission. Introduction of bromine atoms in the bay-positions strongly disrupts the solid-state packing leading to strongly reduced excitonic interactions. Surprisingly, these relatively amorphous materials with weak electronic coupling exhibit stronger formation of triplet excited states by SF because the competing excimer formation is suppressed here.