Biomechanical Investigation of Lower Limbs during Slope Transformation Running with Different Longitudinal Bending Stiffness Shoes.

BACKGROUND: During city running or marathon races, shifts in level ground and up-and-down slopes are regularly encountered, resulting in changes in lower limb biomechanics. The longitudinal bending stiffness of the running shoe affects the running performance. PURPOSE: This research aimed to investigate the biomechanical changes in the lower limbs when transitioning from level ground to an uphill slope under different longitudinal bending stiffness (LBS) levels in running shoes. METHODS: Fifteen male amateur runners were recruited and tested while wearing three different LBS running shoes. The participants were asked to pass the force platform with their right foot at a speed of 3.3 m/s ± 0.2. Kinematics data and GRFs were collected synchronously. Each participant completed and recorded ten successful experiments per pair of shoes. RESULTS: The range of motion in the sagittal of the knee joint was reduced with the increase in the longitudinal bending stiffness. Positive work was increased in the sagittal plane of the ankle joint and reduced in the keen joint. The negative work of the knee joint increased in the sagittal plane. The positive work of the metatarsophalangeal joint in the sagittal plane increased. CONCLUSION: Transitioning from running on a level surface to running uphill, while wearing running shoes with high LBS, could lead to improved efficiency in lower limb function. However, the higher LBS of running shoes increases the energy absorption of the knee joint, potentially increasing the risk of knee injuries. Thus, amateurs should choose running shoes with optimal stiffness when running.

Curved carbon-plated shoe may further reduce forefoot loads compared to flat plate during running.

Using a curved carbon-fiber plate (CFP) in running shoes may offer notable performance benefit over flat plates, yet there is a lack of research exploring the influence of CFP geometry on internal foot loading during running. The objective of this study was to investigate the effects of CFP mechanical characteristics on forefoot biomechanics in terms of plantar pressure, bone stress distribution, and contact force transmission during a simulated impact peak moment in forefoot strike running. We employed a finite element model of the foot-shoe system, wherein various CFP configurations, including three stiffnesses (stiff, stiffer, and stiffest) and two shapes (flat plate (FCFP) and curved plate (CCFP)), were integrated into the shoe sole. Comparing the shoes with no CFP (NCFP) to those with CFP, we consistently observed a reduction in peak forefoot plantar pressure with increasing CFP stiffness. This decrease in pressure was even more notable in a CCFP demonstrating a further reduction in peak pressure ranging from 5.51 to 12.62%, compared to FCFP models. Both FCFP and CCFP designs had a negligible impact on reducing the maximum stress experienced by the 2nd and 3rd metatarsals. However, they greatly influenced the stress distribution in other metatarsal bones. These CFP designs seem to optimize the load transfer pathway, enabling a more uniform force transmission by mainly reducing contact force on the medial columns (the first three rays, measuring 0.333 times body weight for FCFP and 0.335 for CCFP in stiffest condition, compared to 0.373 in NCFP). We concluded that employing a curved CFP in running shoes could be more beneficial from an injury prevention perspective by inducing less peak pressure under the metatarsal heads while not worsening their stress state compared to flat plates.

Can the Entire Function of the Foot Be Concentrated in the Forefoot Area during the Running Stance Phase? A Finite Element Study of Different Shoe Soles.

The goal of this study was to use the finite element (FE) method to compare and study the differences between bionic shoes (BS) and normal shoes (NS) forefoot strike patterns when running. In addition, we separated the forefoot area when forefoot running as a way to create a small and independent area of instability. An adult male of Chinese descent was recruited for this investigation (age: 26 years old; body height: 185 cm; body mass: 82 kg) (forefoot strike patterns). We analyzed forefoot running under two different conditions through FE analysis, and used bone stress distribution feature classification and recognition for further analysis. The metatarsal stress values in forefoot strike patterns with BS were less than with NS. Additionally, the bone stress classification of features and the recognition accuracy rate of metatarsal (MT) 2, MT3 and MT5 were higher than other foot bones in the first 5%, 10%, 20% and 50% of nodes. BS forefoot running helped reduce the probability of occurrence of metatarsal stress fractures. In addition, the findings further revealed that BS may have important implications for the prevention of hallux valgus, which may be more effective in adolescent children. Finally, this study presents a post-processing method for FE results, which is of great significance for further understanding and exploration of FE results.

New Insights Optimize Landing Strategies to Reduce Lower Limb Injury Risk.

Single-leg landing (SL) is often associated with a high injury risk, especially anterior cruciate ligament (ACL) injuries and lateral ankle sprain. This work investigates the relationship between ankle motion patterns (ankle initial contact angle [AICA] and ankle range of motion [AROM]) and the lower limb injury risk during SL, and proposes an optimized landing strategy that can reduce the injury risk. To more realistically revert and simulate the ACL injury mechanics, we developed a knee musculoskeletal model that reverts the ACL ligament to a nonlinear short-term viscoelastic mechanical mechanism (strain rate-dependent) generated by the dense connective tissue as a function of strain. Sixty healthy male subjects were recruited to collect biomechanics data during SL. The correlation analysis was conducted to explore the relationship between AICA, AROM, and peak vertical ground reaction force (PVGRF), joint total energy dissipation (TED), peak ankle knee hip sagittal moment, peak ankle inversion angle (PAIA), and peak ACL force (PAF). AICA exhibits a negative correlation with PVGRF (r = -0.591) and PAF (r = -0.554), and a positive correlation with TED (r = 0.490) and PAIA (r = 0.502). AROM exhibits a positive correlation with TED (r = 0.687) and PAIA (r = 0.600). The results suggested that the appropriate increases in AICA (30° to 40°) and AROM (50° to 70°) may reduce the lower limb injury risk. This study has the potential to offer novel perspectives on the optimized application of landing strategies, thus giving the crucial theoretical basis for decreasing injury risk.

Toe Box Shape of Running Shoes Affects In-Shoe Foot Displacement and Deformation: A Randomized Crossover Study.

BACKGROUND: Long-distance running is popular but associated with a high risk of injuries, particularly toe-related injuries. Limited research has focused on preventive measures, prompting exploration into the efficacy of raised toe box running shoes. PURPOSE: This study aimed to investigate the effect of running shoes with raised toe boxes on preventing toe injuries caused by distance running. METHODS: A randomized crossover design involved 25 male marathon runners (height: 1.70 ± 0.02 m, weight: 62.6 + 4.5 kg) wearing both raised toe box (extended by 8 mm along the vertical axis and 3 mm along the sagittal axis) and regular toe box running shoes. Ground reaction force (GRF), in-shoe displacement, and degree of toe deformation (based on the distance change between the toe and the metatarsal head) were collected. RESULTS: Wearing raised toe box shoes resulted in a significant reduction in vertical (p = 0.001) and antero-posterior (p = 0.015) ground reaction forces during the loading phase, with a notable increase in vertical ground reaction force during the toe-off phase (p < 0.001). In-shoe displacement showed significant decreased movement in the forefoot medial (p < 0.001) and rearfoot (medial: p < 0.001, lateral: p < 0.001) and significant increased displacement in the midfoot (medial: p = 0.002, lateral: p < 0.001). Impact severity on the hallux significantly decreased (p < 0.001), while impact on the small toes showed no significant reduction (p = 0.067). CONCLUSIONS: Raised toe box running shoes offer an effective means of reducing toe injuries caused by long-distance running.

Structural and Organizational Strategies of Locomotor Modules during Landing in Patients with Chronic Ankle Instability.

BACKGROUND: Human locomotion involves the coordinated activation of a finite set of modules, known as muscle synergy, which represent the motor control strategy of the central nervous system. However, most prior studies have focused on isolated muscle activation, overlooking the modular organization of motor behavior. Therefore, to enhance comprehension of muscle coordination dynamics during multi-joint movements in chronic ankle instability (CAI), exploring muscle synergies during landing in CAI patients is imperative. METHODS: A total of 22 patients with unilateral CAI and 22 healthy participants were recruited for this research. We employed a recursive model for second-order differential equations to process electromyographic (EMG) data after filtering preprocessing, generating the muscle activation matrix, which was subsequently inputted into the non-negative matrix factorization model for extraction of the muscle synergy. Muscle synergies were classified utilizing the K-means clustering algorithm and Pearson correlation coefficients. Statistical parameter mapping (SPM) was employed for temporal modular parameter analyses. RESULTS: Four muscle synergies were identified in both the CAI and healthy groups. In Synergy 1, only the gluteus maximus showed significantly higher relative weight in CAI compared to healthy controls (p = 0.0035). Synergy 2 showed significantly higher relative weights for the vastus lateralis in the healthy group compared to CAI (p = 0.018), while in Synergy 4, CAI demonstrated significantly higher relative weights of the vastus lateralis compared to healthy controls (p = 0.030). Furthermore, in Synergy 2, the CAI group exhibited higher weights of the tibialis anterior compared to the healthy group (p = 0.042). CONCLUSIONS: The study suggested that patients with CAI exhibit a comparable modular organizational framework to the healthy group. Investigation of amplitude adjustments within the synergy spatial module shed light on the adaptive strategies employed by the tibialis anterior and gluteus maximus muscles to optimize control strategies during landing in patients with CAI. Variances in the muscle-specific weights of the vastus lateralis across movement modules reveal novel biomechanical adaptations in CAI, offering valuable insights for refining rehabilitation protocols.

Hexagonal barbell deadlift one-repetition maximum estimation using velocity recordings.

This study aimed to determine whether the optimal minimal velocity threshold (MVT) provides more precise estimates of one-repetition maximum (1RM) in the hexagonal barbell deadlift (HBD) than the general and individual MVTs. The 1RM of 27 resistance-trained males were predicted using three types of MVT: (i) General MVT: averaged across subjects' velocity of the 1RM trial (0.25 m·s-1), (ii) individual MVT: velocity attained during the 1RM trial, and (iii) Optimal MVT: MVT that eliminated the differences between the actual and predicted 1RM. Two individual load-velocity relationships were modelled considering five (30-50-70-80%1RM) or six (30-50-70-80-90%1RM) loading conditions. Negligible differences (Effect size < 0.20), low absolute errors (< 5% of the actual 1RM), and extremely high correlations (r > 0.90) were observed between the actual and six predicted 1RMs. The only significant difference was the lower raw errors for the 90%1RM condition (0.60 ± 7.34 kg) compared to the 80%1RM condition (2.27 ± 7.54 kg; p = 0.013). These results suggest that the individual load-velocity relationship offers an accurate estimation of the HBD 1RM in resistance-trained males, and these estimates could maintain similar levels of precision across different types of MVT (general, individual, and optimal) and final tested loads (80%1RM and 90%1RM).

Harmony in Motion: Unraveling the Nexus of Sports, Plant-Based Nutrition, and Antioxidants for Peak Performance.

The intricate interplay between plant-based nutrition, antioxidants, and their impact on athletic performance forms the cornerstone of this comprehensive review. Emphasizing the pivotal importance of dietary choices in the realm of sports, this paper sets the stage for an in-depth exploration of how stress and physical performance are interconnected through the lens of nutrition. The increasing interest among athletes in plant-based diets presents an opportunity with benefits for health, performance, and recovery. It is essential to investigate the connection between sports, plants, and antioxidants. Highlighting the impact of nutrition on recovery and well-being, this review emphasizes how antioxidants can help mitigate oxidative stress. Furthermore, it discusses the growing popularity of plant-based diets among athletes. It elaborates on the importance of antioxidants in combating radicals addressing stress levels while promoting cellular health. By identifying rich foods, it emphasizes the role of a balanced diet in ensuring sufficient intake of these beneficial compounds. Examining stress within the context of sports activities, this review provides insights into its mechanisms and its impact on athletic performance as well as recovery processes. This study explores the impact of plant-based diets on athletes including their types, potential advantages and challenges. It also addresses the drawbacks of relying on plant-based diets, concerns related to antioxidant supplementation and identifies areas where further research is needed. Furthermore, the review suggests directions for research and potential innovations in sports nutrition. Ultimately it brings together the aspects of sports, plant-based nutrition, and antioxidants to provide a perspective for athletes, researchers and practitioners. By consolidating existing knowledge, it offers insights that can pave the way for advancements in the ever-evolving field of sports nutrition.

Macromorphological and foliar epidermal anatomical characteristics of Lilium rosthornii (Liliaceae): Implications for morphological adaptations and taxonomic significance.

This research is to examine the macromorphological and foliar epidermal anatomical features of Lilium rosthornii Diels and its ability to plastically adapt to environmental forces, which is crucial for its taxonomic classification. L. rosthornii has macromorphological characteristics such as linear to lanceolate leaves of up to 20 cm in length and 2-3 cm in breadth, grouped in a whorled pattern. The blooms are voluminous and conspicuous, measuring up to 15 cm in diameter and are supported by a towering stalk that grows up to 1 m in height. The foliar epidermal structure of L. rosthornii exhibits a stomatal length of 82.02 ± 5.77 µm and a width of 29.19 ± 1.39 µm. These measurements suggest that the plant's stomata are influenced by its ploidy levels and may serve as adaptive mechanisms to enhance water consumption efficiency. The leaf structure shows a significant thickness of 398.74 ± 97.96 µm, which might potentially contribute to its ability to withstand environmental challenges. Additionally, the presence of defensive adaptations in the top and lower epidermal layers further supports this observation. The palisade tissue measurement (58.87 ± 9.56 m) and spongy tissue measurement (32.42 ± 12.72 µm) indicate a potential for photosynthetic optimization. Furthermore, there is a possible correlation between the vascular bundle width (28.15 ± 6.52 °m) and the efficiency of nutrition delivery. The results of this study emphasize the notable diversity in the foliar structures of L. rosthornii, offering valuable understanding of its morphological adaptations that have ecological and taxonomic significance. The findings provide a deeper comprehension of the potential impact of anatomical characteristics on plant function and categorization, hence providing significant insights to the domain of plant morphology and systematics. RESEARCH HIGHLIGHTS: Examines Lilium rosthornii's anatomical features and environmental adaptability for taxonomic relevance. Leaf thickness and epidermal defenses indicate resilience to environmental stress. Highlights the diversity in L. rosthornii's foliar structures, with implications for ecological and taxonomic significance Offers insights into the impact of anatomical characteristics on plant function and classification.

A hybrid statistical morphometry free-form deformation approach to 3D personalized foot-ankle models.

Foot and ankle joint models are widely used in the biomechanics community for musculoskeletal and finite element analysis. However, personalizing a foot and ankle joint model is highly time-consuming in terms of medical image collection and data processing. This study aims to develop and evaluate a framework for constructing a comprehensive 3D foot model that integrates statistical shape modeling (SSM) with free-form deformation (FFD) of internal bones. The SSM component is derived from external foot surface scans (skin measurements) of 50 participants, utilizing principal component analysis (PCA) to capture the variance in foot shapes. The derived surface shapes from SSM then guide the FFD process to accurately reconstruct the internal bone structures. The workflow accuracy was established by comparing three model-generated foot models against corresponding skin and bone geometries manually segmented and not part of the original training set. We used the top ten principal components representing 85 % of the population variation to create the model. For prediction validation, the average Dice similarity coefficient, Hausdorff distance error, and root mean square error were 0.92 ± 0.01, 2.2 ± 0.19 mm, and 2.95 ± 0.23 mm for soft tissues, and 0.84 ± 0.03, 1.83 ± 0.1 mm, and 2.36 ± 0.12 mm for bones, respectively. This study presents an efficient approach for 3D personalized foot model reconstruction via SSM generation of the foot surface that informs bone reconstruction based on FFD. The proposed workflow is part of the open-source Musculoskeletal Atlas Project linked to OpenSim and makes it feasible to accurately generate foot models informed by population anatomy, and suitable for rigid body analysis and finite element simulation.

Rethinking running biomechanics: a critical review of ground reaction forces, tibial bone loading, and the role of wearable sensors.

This study presents a comprehensive review of the correlation between tibial acceleration (TA), ground reaction forces (GRF), and tibial bone loading, emphasizing the critical role of wearable sensor technology in accurately measuring these biomechanical forces in the context of running. This systematic review and meta-analysis searched various electronic databases (PubMed, SPORTDiscus, Scopus, IEEE Xplore, and ScienceDirect) to identify relevant studies. It critically evaluates existing research on GRF and tibial acceleration (TA) as indicators of running-related injuries, revealing mixed findings. Intriguingly, recent empirical data indicate only a marginal link between GRF, TA, and tibial bone stress, thus challenging the conventional understanding in this field. The study also highlights the limitations of current biomechanical models and methodologies, proposing a paradigm shift towards more holistic and integrated approaches. The study underscores wearable sensors' potential, enhanced by machine learning, in transforming the monitoring, prevention, and rehabilitation of running-related injuries.

Exploring biomechanical variations in ankle joint injuries among Latin dancers with different stance patterns: utilizing OpenSim musculoskeletal models.

Background: Dancers represent the primary demographic affected by ankle joint injuries. In certain movements, some Latin dancers prefer landing on the Forefoot (FT), while others prefer landing on the Entire foot (ET). Different stance patterns can have varying impacts on dancers' risk of ankle joint injuries. The purpose of this study is to investigate the differences in lower limb biomechanics between Forefoot (FT) dancers and Entire foot (ET) dancers. Method: A group of 21 FT dancers (mean age 23.50 (S.D. 1.12) years) was compared to a group of 21 ET dancers (mean age 23.33 (S.D. 0.94) years), performing the kicking movements of the Jive in response to the corresponding music. We import data collected from Vicon and force plates into OpenSim to establish musculoskeletal models for computing kinematics, dynamics, muscle forces, and muscle co-activation. Result: In the sagittal plane: ankle angle (0%-100%, p < 0.001), In the coronal plane: ankle angle (0%-9.83%, p = 0.001) (44.34%-79.52%, p = 0.003), (88.56%-100%, p = 0.037), ankle velocity (3.73%-11.65%, p = 0.017) (94.72-100%, p = 0.031); SPM analysis revealed that FT dancers exhibited significantly smaller muscle force than ET dancers around the ankle joint during the stance phase. Furthermore, FT dancers displayed reduced co-activation compared to ET dancers around the ankle joint during the descending phase, while demonstrating higher co-activation around the knee joint than ET dancers. Conclusion: This study biomechanically demonstrates that in various stance patterns within Latin dance, a reduction in lower limb stance area leads to weakened muscle strength and reduced co-activation around the ankle joint, and results in increased ankle inversion angles and velocities, thereby heightening the risk of ankle sprains. Nevertheless, the increased co-activation around the knee joint in FT dancers may be a compensatory response for reducing the lower limb stance area in order to maintain stability.

Influence of Torsional Stiffness in Badminton Footwear on Lower Limb Biomechanics.

Torsional stiffness of athletic footwear plays a crucial role in preventing injury and improving sports performance. Yet, there is a lack of research focused on the biomechanical effect of torsional stiffness in badminton shoes. This study aimed to comprehensively investigate the influence of three different levels of torsional stiffness in badminton shoes on biomechanical characteristics, sports performance, and injury risk in badminton players. Fifteen male players, aged 22.8 ± 1.96 years, participated in the study, performing badminton-specific tasks, including forehand clear stroke [left foot (FCL) and right foot (FCR)], 45-degree sidestep cutting (45C), and consecutive vertical jumps (CVJ). The tasks were conducted wearing badminton shoes of torsional stiffness measured with Shore D hardness 50, 60, and 70 (referred to as 50D, 60D, and 70D, respectively). The primary biomechanical parameters included ankle, knee, and MTP joint kinematics, ankle and knee joint moments, peak ground reaction forces, joint range of motion (ROM), and stance time. A one-way repeated measures ANOVA was employed for normally distributed data and Friedman tests for non-normally distributed data. The 70D shoe exhibited the highest ankle dorsiflexion and lowest ankle inversion peak angles during 45C task. The 60D shoe showed significantly lower knee abduction angle and coronal motions compared to the 50D and 70D shoes. Increased torsional stiffness reduced stance time in the FCR task. No significant differences were observed in anterior-posterior and medial-lateral ground reaction forces (GRF). However, the 70D shoe demonstrated higher vertical GRF than the 50D shoe while performing the FCR task, particularly during 70% - 75% of stance. Findings from this study revealed the significant role of torsional stiffness in reducing injury risk and optimizing performance during badminton tasks, indicating that shoes with an intermediate level of stiffness (60D) could provide a beneficial balance between flexibility and stability. These findings may provide practical references in guiding future badminton shoe research and development. Further research is necessary to explore the long-term effects of altering stiffness, considering factors such as athletic levels and foot morphology, to understand of the influence of torsional stiffness on motion biomechanics and injury prevalence in badminton-specific tasks.

A new method applied for explaining the landing patterns: Interpretability analysis of machine learning.

As one of many fundamental sports techniques, the landing maneuver is also frequently used in clinical injury screening and diagnosis. However, the landing patterns are different under different constraints, which will cause great difficulties for clinical experts in clinical diagnosis. Machine learning (ML) have been very successful in solving a variety of clinical diagnosis tasks, but they all have the disadvantage of being black boxes and rarely provide and explain useful information about the reasons for making a particular decision. The current work validates the feasibility of applying an explainable ML (XML) model constructed by Layer-wise Relevance Propagation (LRP) for landing pattern recognition in clinical biomechanics. This study collected 560 groups landing data. By incorporating these landing data into the XML model as input signals, the prediction results were interpreted based on the relevance score (RS) derived from LRP. The interpretation obtained from XML was evaluated comprehensively from the statistical perspective based on Statistical Parametric Mapping (SPM) and Effect Size. The RS has excellent statistical characteristics in the interpretation of landing patterns between classes, and also conforms to the clinical characteristics of landing pattern recognition. The current work highlights the applicability of XML methods that can not only satisfy the traditional decision problem between classes, but also largely solve the lack of transparency in landing pattern recognition. We provide a feasible framework for realizing interpretability of ML decision results in landing analysis, providing a methodological reference and solid foundation for future clinical diagnosis and biomechanical analysis.

Effects of different contact angles during forefoot running on the stresses of the foot bones: a finite element simulation study.

Introduction: The purpose of this study was to compare the changes in foot at different sole-ground contact angles during forefoot running. This study tried to help forefoot runners better control and improve their technical movements by comparing different sole-ground contact angles. Methods: A male participant of Chinese ethnicity was enlisted for the present study, with a recorded age of 25 years, a height of 183 cm, and a body weight of 80 kg. This study focused on forefoot strike patterns through FE analysis. Results: It can be seen that the peak von Mises stress of M1-5 (Metatarsal) of a (Contact angle: 9.54) is greater than that of b (Contact angle: 7.58) and c (Contact angle: 5.62) in the three cases. On the contrary, the peak von Mises stress of MC (Medial Cuneiform), IC (Intermediate Cuneiform), LC (Lateral Cuneiform), C (Cuboid), N (Navicular), T (Tarsal) in three different cases is opposite, and the peak von Mises stress of c is greater than that of a and b. The peak von Mises stress of b is between a and c. Conclusion: This study found that a reduced sole-ground contact angle may reduce metatarsal stress fractures. Further, a small sole-ground contact angle may not increase ankle joint injury risk during forefoot running. Hence, given the specialized nature of the running shoes designed for forefoot runners, it is plausible that this study may offer novel insights to guide their athletic pursuits.

PGC-1α activation boosts exercise-dependent cellular response in the skeletal muscle.

The role of Peroxisome proliferator-activated receptor-gamma coactivator alpha (PGC-1α) in fat metabolism is not well known. In this study, we compared the mechanisms of muscle-specific PGC-1α overexpression and exercise-related adaptation-dependent fat metabolism. PGC-1α trained (PGC-1α Ex) and wild-trained (wt-ex) mice were trained for 10 weeks, five times a week at 30 min per day with 60 percent of their maximal running capacity. The PGC-1α overexpressed animals exhibited higher levels of Fibronectin type III domain-containing protein 5 (FNDC5), 5' adenosine monophosphate-activated protein kinase alpha (AMPK-α), the mammalian target of rapamycin (mTOR), Sirtuin 1 (SIRT1), Lon protease homolog 1 (LONP1), citrate synthase (CS), succinate dehydrogenase complex flavoprotein subunit A (SDHA), Mitofusin-1 (Mfn1), endothelial nitric oxide synthase (eNOS), Hormone-sensitive lipase (HSL), adipose triglyceride lipase (ATGL), G protein-coupled receptor 41 (GPR41), and Phosphatidylcholine Cytidylyltransferase 2 (PCYT2), and lower levels of Sirtuin 3 (SIRT3) compared to wild-type animals. Exercise training increased the protein content levels of SIRT1, HSL, and ATGL in both the wt-ex and PGC-1α trained groups. PGC-1α has a complex role in cellular signaling, including the upregulation of lipid metabolism-associated proteins. Our data reveals that although exercise training mimics the effects of PGC-1α overexpression, it incorporates some PGC-1α-independent adaptive mechanisms in fat uptake and cell signaling.

Integrating an LSTM framework for predicting ankle joint biomechanics during gait using inertial sensors.

The ankle joint plays a crucial role in gait, facilitating the articulation of the lower limb, maintaining foot-ground contact, balancing the body, and transmitting the center of gravity. This study aimed to implement long short-term memory (LSTM) networks for predicting ankle joint angles, torques, and contact forces using inertial measurement unit (IMU) sensors. Twenty-five healthy participants were recruited. Two IMU sensors were attached to the foot dorsum and the vertical axis of the distal anteromedial tibia in the right lower limb to record acceleration and angular velocity during running. We proposed a LSTM-MLP (multilayer perceptron) model for training time-series data from IMU sensors and predicting ankle joint biomechanics. The model underwent validation and testing using a custom nested k-fold cross-validation process. The average values of the coefficient of determination (R2), mean absolute error (MAE), and mean squared error (MSE) for ankle dorsiflexion joint and moment, subtalar inversion joint and moment, and ankle joint contact forces were 0.89 ± 0.04, 0.75 ± 1.04, and 2.96 ± 4.96 for walking, and 0.87 ± 0.07, 0.88 ± 1.26, and 4.1 ± 7.17 for running, respectively. This study demonstrates that IMU sensors, combined with LSTM neural networks, are invaluable tools for evaluating ankle joint biomechanics in lower limb pathological diagnosis and rehabilitation, offering a cost-effective and versatile alternative to traditional experimental settings.

Influence of changes in foot morphology and temperature on bruised toenail injury risk during running.

Despite runners frequently suffering from dermatologic issues during long distance running, there is no compelling evidence quantitatively investigating their underlying injury mechanism. This study aimed to determine the foot morphology and temperature changes during long distance running and reveal the effect of these alterations on the injury risk of bruised toenail by measuring the subjective-perceived hallux comfort and gap length between the hallux and toebox of the shoe. Ten recreational runners participated in the experimental tests before (baseline), immediately after 5 and 10 km of treadmill running (12 km/h), in which the foot morphology was measured by a 3D foot scanner, the foot temperature was detected by an infrared camera, the perceived comfort was recorded by a visual analogue scale, and the gap length in the sagittal plane was captured by a high-speed camera. Ball width became narrower (106.39 ± 6.55 mm) and arch height (12.20 ± 2.34 mm) was reduced greatly after the 10 km run (p < 0.05). Foot temperature increased significantly after 5 and 10 km of running, and the temperature of dorsal hallux (35.12 ± 1.46 °C), dorsal metatarsal (35.92 ± 1.59 °C), and medial plantar metatarsal (37.26 ± 1.34 °C) regions continued to increase greatly from 5 to 10 km of running (p < 0.05). Regarding hallux comfort, the perceived scores significantly reduced after 5 and 10 km of running (2.10 ± 0.99, p < 0.05). In addition, during one running gait cycle, there was a significant increase in gap length at initial contact (39.56 ± 6.45 mm, p < 0.05) for a 10 km run, followed by a notable decrease upon reaching midstance (29.28 ± 6.81 mm, p < 0.05). It is concluded that the reduced ball width and arch height while increased foot temperature during long-distance running would exacerbate foot-shoe interaction, potentially responsible for bruised toenail injuries.

Differences in intra-foot movement strategies during locomotive tasks among chronic ankle instability, copers and healthy individuals.

Individuals with chronic ankle instability (CAI) suffer from the resulting sequela of repetitive lateral ankle sprains (LAS), whilst copers appear to cope with initial LAS successfully. Therefore, the aim of this study was to explore the intra-foot biomechanical differences among CAI, copers, and healthy individuals during dynamic tasks. Twenty-two participants per group were included and required to perform cutting and different landing tasks (DL: drop landing; FL: forward jump followed a landing). A five-segment foot model with 8 degrees of freedom was used to explore the intra-foot movement among these three groups. Smaller dorsiflexion angles were found in copers (DL tasks and prelanding task) and CAI (DL and FL task) compared to healthy participants. Copers presented a more eversion position compared to others during these dynamic tasks. During the descending phase of DL task, greater dorsiflexion angles in the metatarsophalangeal joint were found in copers compared to the control group. Joint moment difference was only found in the subtalar joint during the descending phase of FL task, presenting more inversion moments in copers compared to healthy participants. Copers rely on more eversion positioning to prevent over-inversion of the subtalar joint compared to CAI. Further, the foot became more unstable when conducting sport-related movements, suggesting that foot stability seems to be sensitive to the task types. These findings may help in designing and implementing interventions to restore functions of the ankle joint in CAI individuals.

Epigenetic and "redoxogenetic" adaptation to physical exercise.

Exercise-induced adaptation is achieved by altering the epigenetic landscape of the entire genome leading to the expression of genes involved in various processes including regulatory, metabolic, adaptive, immune, and myogenic functions. Clinical and experimental data suggest that the methylation pattern/levels of promoter/enhancer is not linearly correlated with gene expression and proteome levels during physical activity implying a level of complexity and interplay with other regulatory modulators. It has been shown that a higher level of physical fitness is associated with a slower DNA methylation-based aging clock. There is strong evidence supporting exercise-induced ROS being a key regulatory mediator through overlapping events, both as signaling entities and through oxidative modifications to various protein mediators and DNA molecules. ROS generated by physical activity shapes epigenome both directly and indirectly, a complexity we are beginning to unravel within the epigenetic arrangement. Oxidative modification of guanine to 8-oxoguanine is a non-genotoxic alteration, does not distort DNA helix and serves as an epigenetic-like mark. The reader and eraser of oxidized guanine is the 8-oxoguanine DNA glycosylase 1, contributing to changes in gene expression. In fact, it can modulate methylation patterns of promoters/enhancers consequently leading to multiple phenotypic changes. Here, we provide evidence and discuss the potential roles of exercise-induced ROS in altering cytosine methylation patterns during muscle adaptation processes.