RESUMEN
The outbreak of SARS-CoV-2 pandemic highlighted the worldwide lack of surgical masks and personal protective equipment, which represent the main defense available against respiratory diseases as COVID-19. At the time, masks shortage was dramatic in Italy, the first European country seriously hit by the pandemic: aiming to address the emergency and to support the Italian industrial reconversion to the production of surgical masks, a multidisciplinary team of the University of Bologna organized a laboratory to test surgical masks according to European regulations. The group, driven by the expertise of chemical engineers, microbiologists, and occupational physicians, set-up the test lines to perform all the functional tests required. The laboratory started its activity on late March 2020, and as of the end of December of the same year 435 surgical mask prototypes were tested, with only 42 masks compliant to the European standard. From the analysis of the materials used, as well as of the production methods, it was found that a compliant surgical mask is most likely composed of three layers, a central meltblown filtration layer and two external spunbond comfort layers. An increase in the material thickness (grammage), or in the number of layers, does not improve the filtration efficiency, but leads to poor breathability, indicating that filtration depends not only on pure size exclusion, but other mechanisms are taking place (driven by electrostatic charge). The study critically reviewed the European standard procedures, identifying the weak aspects; among the others, the control of aerosol droplet size during the bacterial filtration test results to be crucial, since it can change the classification of a mask when its performance lies near to the limiting values of 95 or 98%.
RESUMEN
The regeneration of injured tendons and ligaments is challenging because the scaffolds needs proper mechanical properties and a biomimetic morphology. In particular, the morphological arrangement of scaffolds is a key point to drive the cells growth to properly regenerate the collagen extracellular matrix. Electrospinning is a promising technique to produce hierarchically structured nanofibrous scaffolds able to guide cells in the regeneration of the injured tissue. Moreover, the dynamic stretching in bioreactors of electrospun scaffolds had demonstrated to speed up cell shape modifications in vitro. The aim of the present study was to combine different imaging techniques such as high-resolution X-ray tomography (XCT), scanning electron microscopy (SEM), fluorescence microscopy and histology to investigate if hierarchically structured poly (L-lactic acid) and collagen electrospun scaffolds can induce morphological modifications in human fibroblasts, while cultured in static and dynamic conditions. After 7 days of parallel cultures, the results assessed that fibroblasts had proliferated on the external nanofibrous sheath of the static scaffolds, elongating themselves circumferentially. The dynamic cultures revealed a preferential axial orientation of fibroblasts growth on the external sheath. The aligned nanofibre bundles inside the hierarchical scaffolds instead, allowed a physiological distribution of the fibroblasts along the nanofibre direction. Inside the dynamic scaffolds, cells appeared thinner compared with the static counterpart. This study had demonstrated that hierarchically structured electrospun scaffolds can induce different fibroblasts morphological modifications during static and dynamic conditions, modifying their shape in the direction of the applied loads. LAY DESCRIPTION: To enhance the regeneration of injured tendons and ligaments cells need to growth on dedicated structures (scaffolds) with mechanical properties and a fibrous morphology similar to the natural tissue. In particular, the morphological organisation of scaffolds is fundamental in leading cells to colonise them, regenerating the collagen extracellular matrix. Electrospinning is a promising technique to produce fibres with a similar to the human collagen fibres, suitable to design complex scaffolds able to guide cells in the reconstruction of the natural tissue. Moreover, it is well established that the cyclic stretching of these scaffolds inside dedicated systems called bioreactors, can speed up cells growth and their shape modification. The aim of the present study was to investigate how hierarchically structured electrospun scaffolds, made of resorbable material such as poly(L-lactic acid) and collagen, could induce morphological changes in human fibroblasts, while cultured during static and dynamic conditions. These scaffolds were composed by an external electrospun membrane that grouped inside it a ring-shaped bundle, made of axially aligned nanofibres, resembling the morphological arrangement of tendon and ligament tissue. After 7 days of parallel cultures, the scaffolds were investigated using the following imaging techniques: (i) high-resolution X-ray tomography (XCT); (ii) scanning electron microscopy (SEM); (iii) fluorescence microscopy and (iv) histology. The results showed that fibroblasts were able to grow on the external nanofibrous sheath of the static scaffolds, by elongating themselves along their circumference. The dynamic cultures revealed instead a preferential axial orientation of fibroblasts grown on the external sheath. The aligned nanofibre bundles inside the hierarchical scaffolds allowed an axial distribution of the fibroblasts along the nanofibres direction. This study has demonstrated that the electrospun hierarchically structured scaffolds investigated can modify the fibroblasts morphology both in static and dynamic conditions, in relation with the direction of the applied loads.
Asunto(s)
Fibroblastos/fisiología , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Materiales Biocompatibles/química , Materiales Biomiméticos , Células Cultivadas , Colágeno/fisiología , Fibroblastos/citología , Fibroblastos/ultraestructura , Humanos , Ligamentos/patología , Microscopía Electrónica de Rastreo , Microscopía Fluorescente , Nanofibras/química , Poliésteres/química , Medicina Regenerativa , Tendones/fisiología , Tomografía por Rayos XRESUMEN
Two-dimensional vs three-dimensional culture conditions, such as the presence of extracellular matrix components, could deeply influence the cell fate and properties. In this paper we investigated proliferation, differentiation, survival, apoptosis, growth and neurotrophic factor synthesis of rat embryonic stem cells (RESCs) cultured in 2D and 3D conditions generated using Cultrex® Basement Membrane Extract (BME) and in poly-(L-lactic acid) (PLLA) electrospun sub-micrometric fibres. It is demonstrated that, in the absence of other instructive stimuli, growth, differentiation and paracrine activity of RESCs are directly affected by the different microenvironment provided by the scaffold. In particular, RESCs grown on an electrospun PLLA scaffolds coated or not with BME have a higher proliferation rate, higher production of bioactive nerve growth factor (NGF) and vascular endothelial growth factor (VEGF) compared to standard 2D conditions, lasting for at least 2 weeks. Due to the high mechanical flexibility of PLLA electrospun scaffolds, the PLLA/stem cell culture system offers an interesting potential for implantable neural repair devices.
Asunto(s)
Diferenciación Celular , Proliferación Celular , Células Madre Embrionarias/fisiología , Comunicación Paracrina , Andamios del Tejido/química , Animales , Apoptosis , Factor Neurotrófico Derivado del Encéfalo/genética , Factor Neurotrófico Derivado del Encéfalo/metabolismo , Caspasa 3/metabolismo , Técnicas de Cultivo de Célula , Supervivencia Celular , Células Cultivadas , Medios de Cultivo , Técnicas Electroquímicas , Matriz Extracelular/metabolismo , Expresión Génica , Ácido Láctico/química , Factor de Crecimiento Nervioso/metabolismo , Factor 3 de Transcripción de Unión a Octámeros/genética , Factor 3 de Transcripción de Unión a Octámeros/metabolismo , Poliésteres , Polímeros/química , Ratas , Factor A de Crecimiento Endotelial Vascular/genética , Factor A de Crecimiento Endotelial Vascular/metabolismoRESUMEN
In this study we investigated the influence of electrospun polymer fibers on the properties of a α-tricalcium phosphate/gelatin biomimetic cement. To this aim, we added different amounts of poly(L-lactic acid) and poly(lactide-co-glycolide) fibers to the cement composition. Fibers enrichment provoked a significant reduction of both initial and final setting times. Moreover electrospun polymer fibers slowed down the conversion of α-tricalcium phosphate into calcium deficient hydroxyapatite. As a result, the final cements were more compact than the control cement, because of the smaller crystal dimensions and reduced crystallinity of the apatitic phase. The compressive strength, σ(b), and Young's modulus, E, of the control cement decreased significantly after 40 days soaking in physiological solution, whereas the more compact microstructure enabled fiber reinforced cements to maintain their mechanical properties in the long term.
Asunto(s)
Materiales Biomiméticos/química , Cementos para Huesos/química , Fenómenos Biomecánicos , Fosfatos de Calcio/química , Fuerza Compresiva , Cristalización , Durapatita/química , Módulo de Elasticidad , Humanos , Ácido Láctico/química , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Poliésteres , Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Polímeros/química , Difracción de Rayos XRESUMEN
We present 8 cases of centrally-originating hyperthermic syndrome, the initial cause being either neuroleptic malingnant syndrome, hyperthemia after discontinuance of antiparkinsonian therapy or heatstroke. We review the physiological and neurochemical mechanisms involved in thermoregulation, emphasizing the role of dopamine. A single mechanism, consistent with pharmacological or neuropathological impairment of the dopaminergic system, could be responsible for all the cases of hyperthermic syndrome presented.
Asunto(s)
Dopamina/metabolismo , Fiebre/metabolismo , Adolescente , Adulto , Anciano , Regulación de la Temperatura Corporal , Femenino , Fiebre/etiología , Agotamiento por Calor/metabolismo , Humanos , Masculino , Persona de Mediana Edad , Síndrome Neuroléptico Maligno/metabolismoRESUMEN
Hyperthermia, with no signs of any underlying infection, may occur in the course of neuroleptic malignant syndrome, fatal catatonia, heat stroke, or malignant hyperthermia. We describe hyperthermia as a complication after discontinuance of antiparkinsonian treatment with levodopa/carbidopa and bromocriptine. Impaired nigrostriatal, hypothalamic, and mesolimbic dopaminergic functions could be involved in pathogenesis.
Asunto(s)
Bromocriptina/uso terapéutico , Carbidopa/uso terapéutico , Fiebre/diagnóstico , Levodopa/uso terapéutico , Enfermedad de Parkinson/tratamiento farmacológico , Receptores Dopaminérgicos/metabolismo , Regulación de la Temperatura Corporal , Combinación de Medicamentos/uso terapéutico , Femenino , Fiebre/metabolismo , Fiebre/fisiopatología , Humanos , Hipertermia Maligna/diagnóstico , Persona de Mediana Edad , Síndrome Neuroléptico Maligno/diagnóstico , Enfermedad de Parkinson/diagnóstico , Enfermedad de Parkinson/fisiopatologíaRESUMEN
The AA. relate upon the results obtained in 42 patients treated with transsphenoidal surgery for hypophyseal adenomas, concerning 1 week and 6 months follow up in ophthalmologic deficits recovery. They emphasize the importance of early diagnosis and treatment.