Neodymium laser-pumped ultra-low noise tunable Brillouin fiber laser around 920†nm.

We have developed an ultra-low noise tunable Brillouin fiber laser exhibiting three orders of magnitude better frequency noise performance than the Neodymium-doped fiber laser pump and remarkable optical signal-to-noise ratio exceeding 80 dB suitable for immediate applications in coherent nonlinear conversion, quantum computing and underwater communications. In addition, we have implemented a custom optical phase-locked loop to ensure long-term stable operation and have investigated its impact on frequency noise. We demonstrate the power scalability of the single frequency (Hz-class) Brillouin laser, delivering over 500 mW with tunability across the 900 nm to 930 nm range in an all-fiber fully polarization-maintaining architecture.

High power ultralow-intensity noise continuous wave laser tunable from orange to red.

We report here on the development of a multi-Watt power tunable single frequency ultra-low noise laser system emitting around 620 nm. More than 5 W of output power is obtained between 616.5 nm and 630.8 nm using sum frequency generation of 1050 nm and 1550 nm tunable laser sources in a periodic poled lithium niobate crystal. The tunability is achieved through temperature and channel shift, and only limited by the crystal characteristics. An output power of 10.1 W and an optical-optical efficiency of 45% are reached at 624.5 nm. The relative intensity noise properties of the conversion process have been experimentally investigated in different configurations showing excellent agreement with the analytical prediction.

Ultralow-intensity noise, 10 W all-fiber single-frequency tunable laser system around 1550 nm.

We report herein on the development of a linearly polarized, single-frequency tunable laser system producing more than 10 W in the 1550 nm range, using a two-stage erbium/ytterbium co-doped fiber-based master oscillator power amplifier (MOPA) architecture. The all-fiber MOPA provides an ultralow intensity noise of -160dBc/Hz beyond 200 kHz between 1533 and 1571 nm (Δλ=38nm) at full output power and a minimum optical signal to noise ratio of 38 dB. A good stability is obtained over 4 h at maximum power for several wavelengths with peak-to-peak fluctuation less than 3% and rms below 0.5%.

Robust 17 W single-pass second-harmonic-generation at 532 nm and relative-intensity-noise investigation.

We demonstrate a 17 W single-frequency, low-intensity-noise green source at 532 nm, by single-pass second-harmonic generation of a 50 W continuous-wave fiber laser in a 30 mm MgO-doped periodically-poled stoichiometric lithium tantalate crystal. The maximum conversion efficiency is about 37%. A nearly Gaussian beam (M2<1.15 at 15 W) and low wavefront distortion are obtained. The system shows stable behavior over 100 h of uninterrupted operation. The evolution of the relative-intensity-noise transfer from the fundamental to the second harmonic is theoretically and experimentally investigated with high resolution.

Ultra-low intensity noise, all fiber 365 W linearly polarized single frequency laser at 1064†nm.

We demonstrate a robust linearly polarized 365 W, very low amplitude noise, single frequency master oscillator power amplifier at 1064 nm. Power scaling was done through a custom large mode area fiber with a mode field diameter of 30 µm. No evidence of stimulated Brillouin scattering or modal instabilities are observed. The relative intensity noise is reduced down to -160 dBc/Hz between 2 kHz and 10 kHz via a wide band servo loop (1 MHz bandwidth). We achieve 350 W of isolated power, with a power stability < 0.7% RMS over 1100 hours of continuous operation and a near diffraction limited beam (M2 < 1.1).

39 W narrow spectral linewidth monolithic ytterbium-doped fiber MOPA system operating at 976 nm.

We report on a monolithic narrow spectral linewidth master oscillator power amplifier (MOPA) delivering up to 39 W around 976 nm with very high contrast. The amplifier is based on an ytterbium-doped large mode area (LMA) octagonal double clad (DC) active fiber with parameters optimized for long living three-level operation.

High-power tunable low-noise coherent source at 1.06 µm based on a surface-emitting semiconductor laser.

Exploiting III-V semiconductor technologies, vertical external-cavity surface-emitting laser (VECSEL) technology has been identified for years as a good candidate to develop lasers with high power, large coherence, and broad tunability. Combined with fiber amplification technology, tunable single-frequency lasers can be flexibly boosted to a power level of several tens of watts. Here, we demonstrate a high-power, single-frequency, and broadly tunable laser based on VECSEL technology. This device emits in the near-infrared around 1.06 µm and exhibits high output power (>100 mW) with a low-divergence diffraction-limited TEM00 beam. It also features a narrow free-running linewidth of <400 kHz with high spectral purity (side mode suppression ratio >55 dB) and continuous broadband tunability greater than 250 GHz (<15 V piezo voltage, 6 kHz cutoff frequency) with a total tunable range up to 3 THz. In addition, a compact design without any movable intracavity elements offers a robust single-frequency regime. Through fiber amplification, a tunable single-frequency laser is achieved at an output power of 50 W covering the wavelength range from 1057 to 1066 nm. Excess intensity noise brought on by the amplification stage is in good agreement with a theoretical model. A low relative intensity noise value of -145 dBc/Hz is obtained at 1 MHz, and we reach the shot-noise limit above 200 MHz.

25 W single-frequency, low noise fiber MOPA at 1120 nm.

This Letter reports on the development of a 25 W single-frequency, all-fiber master oscillator power amplifier (MOPA) operating at 1120 nm. By heating the gain fiber at 75°C, an output power of 25.3 W is achieved with an optical-to-optical efficiency of 53.5%. The output shows no sign of stimulated Brillouin scattering and the signal to amplified spontaneous emission ratio is close to 40 dB. A M2 value of 1.15 and a polarization extinction ratio of 17 dB are measured. The relative intensity noise of the output is also characterized, reaching -155 dBc/Hz at 10 MHz at the maximum output power. The study of the noise dynamics highlights, for the first time to the best of our knowledge, an unpredicted behavior due to the strong backward amplified spontaneous emission.

Gain dynamics of clad-pumped Yb-fiber amplifier and intensity noise control.

Gain dynamics study provides an attractive method to understand the intensity noise behavior in fiber amplifiers. Here, the gain dynamics of a medium power (5 W) clad-pumped Yb-fiber amplifier is experimentally evaluated by measuring the frequency domain transfer functions for the input seed and pump lasers from 10 Hz to 1 MHz. We study gain dynamic behavior of the fiber amplifier in the presence of significant residual pump power (compared to the seed power), showing that the seed transfer function is strongly saturated at low Fourier frequencies while the pump power modulation transfer function is nearly unaffected. The characterization of relative intensity noise (RIN) of the fiber amplifier is well explained by the gain dynamics analysis. Finally, a 600 kHz bandwidth feedback loop using an acoustic-optical modulator (AOM) controlling the seed intensity is successfully demonstrated to suppress the broadband laser intensity noise. A maximum noise reduction of about 30 dB is achieved leading to a RIN of -152 dBc/Hz (~1 kHz-10 MHz) at 2.5 W output power.

High-power and low-intensity noise laser at 1064 nm.

We have developed a single-frequency, narrow-linewidth (Δν<50 kHz) laser operating at 1064 nm with a high output power (50 W). The laser is based on an ytterbium-doped fiber master oscillator power amplifier architecture with an output beam at the diffraction limit. An output power of 50 W is obtained with two amplification stages using a 50 mW diode laser seeder. We have carefully studied the relative intensity noise at each amplification stage. The detrimental effect due to stimulated Brillouin scattering on residual amplitude noise has been observed on the high-power booster stage. After careful optimization, this laser exhibits low intensity noise with a RMS value equal to 0.012% (1 kHz/10 MHz) at 50 W.