Analysis of carbon nanotube levels in organic matter: an inter-laboratory comparison to determine best practice.

Carbon nanotubes (CNTs) are increasingly being used in industrial applications, but their toxicological data in animals and humans are still sparse. To assess the toxicological dose-response of CNTs and to evaluate their pulmonary biopersistence, their quantification in tissues, especially lungs, is crucial. There are currently no reference methods or reference materials for low levels of CNTs in organic matter. Among existing analytical methods, few have been fully and properly validated. To remedy this, we undertook an inter-laboratory comparison on samples of freeze-dried pig lung, ground and doped with CNTs. Eight laboratories were enrolled to analyze 3 types of CNTs at 2 concentration levels each in this organic matrix. Associated with the different analysis techniques used (specific to each laboratory), sample preparation may or may not have involved prior digestion of the matrix, depending on the analysis technique and the material being analyzed. Overall, even challenging, laboratories' ability to quantify CNT levels in organic matter is demonstrated. However, CNT quantification is often overestimated. Trueness analysis identified effective methods, but systematic errors persisted for some. Choosing the assigned value proved complex. Indirect analysis methods, despite added steps, outperform direct methods. The study emphasizes the need for reference materials, enhanced precision, and organized comparisons.

Immunotoxicity of engineered nanomaterials and their role in asthma.

The toxicity of engineered nanomaterials (ENMs) in vivo and in vitro has formed the basis of most studies. However, the toxicity of ENMs, particularly on the immune system, i.e. immunotoxicity, and their role in manipulating it, are less known. This review addresses the initiation or exacerbation as well as the attenuation of allergic asthma by a variety of ENMs and how they may be used in drug delivery to enhance the treatment of asthma. This review also highlights a few research gaps in the study of the immunotoxicity of ENMs, for example, the potential drawbacks of assays used in immunotoxicity assays; the potential role of hormesis during dosing of ENMs; and the variables that result in discrepancies among different studies, such as the physicochemical properties of ENMs, differences in asthmatic animal models, and different routes of administration.

A Comparative Study of the Biodurability and Persistence of Gold, Silver and Titanium Dioxide Nanoparticles Using the Continuous Flow through System.

The potential for nanoparticles to cause harm to human health and the environment is correlated with their biodurability in the human body and persistence in the environment. Dissolution testing serves to predict biodurability and nanoparticle environmental persistence. In this study, dissolution testing using the continuous flow through system was used to investigate the biodurability and persistence of gold nanoparticles (AuNPs), silver nanoparticles (AgNPs) and titanium dioxide nanoparticles (TiO2 NPs) in five different simulated biological fluids and two synthetic environmental media to predict their behaviour in real life situations. This study examined the physicochemical properties and agglomeration state of gold, silver and titanium dioxide nanoparticles before and after dissolution tests using three different techniques (UV-vis, XRD and TEM). The UV-vis spectra revealed that all three nanoparticles shifted to higher wavelengths after being exposed to simulated fluids. The titanium powder was found to be mixed with both rutile and anatase, according to XRD examination. The average diameter of gold nanoparticles was 14 nm, silver nanoparticles were 10 nm and titanium dioxide nanoparticles were 25 nm, according to TEM images. The gold and silver nanoparticles were observed to be spherical, but the titanium dioxide nanoparticles were irregular in shape, with some being spherical. The level of dissolved nanoparticles in simulated acidic media was higher in magnitude compared to that dissolved in simulated alkaline media. The results obtained via the continuous flow through dissolution system also displayed very significant dissolution rates. For TiO2 NPs the calculated half-times were in the range of 13-14 days, followed by AuNPs ranging between 4-12 days, significantly longer if compared to the half-times of AgNPs ranging between 2-7 days. AuNPs and TiO2 NPs were characterized by low dissolution rates therefore are expected to be (bio)durable in physiological surroundings and persistent in the environment thus, they might impose long-term effects on humans and the environment. In contrast, AgNPs have high dissolution rates and not (bio)durable and hence may cause short-term effects. The results suggest a hierarchy of biodurability and persistence of TiO2 NPs > AuNPs > AgNPs. It is recommended that nanoparticle product developers should follow the test guidelines stipulated by the OECD to ensure product safety for use before it is taken to the market.

Biokinetics of subacutely co-inhaled same size gold and silver nanoparticles.

BACKGROUND: Toxicokinetics of nanomaterials, including studies on the absorption, distribution, metabolism, and elimination of nanomaterials, are essential in assessing their potential health effects. The fate of nanomaterials after inhalation exposure to multiple nanomaterials is not clearly understood. METHODS: Male Sprague-Dawley rats were exposed to similar sizes of silver nanoparticles (AgNPs, 10.86 nm) and gold nanoparticles (AuNPs, 10.82 nm) for 28 days (6-h/day, 5-days/week for four weeks) either with separate NP inhalation exposures or with combined co-exposure in a nose-only inhalation system. Mass concentrations sampled from the breathing zone were AuNP 19.34 ± 2.55 µg/m3 and AgNP 17.38 ± 1.88 µg/m3 for separate exposure and AuNP 8.20 µg/m3 and AgNP 8.99 µg/m3 for co-exposure. Lung retention and clearance were previously determined on day 1 (6-h) of exposure (E-1) and on post-exposure days 1, 7, and 28 (PEO-1, PEO-7, and PEO-28, respectively). In addition, the fate of nanoparticles, including translocation and elimination from the lung to the major organs, were determined during the post-exposure observation period. RESULTS: AuNP was translocated to the extrapulmonary organs, including the liver, kidney, spleen, testis, epididymis, olfactory bulb, hilar and brachial lymph nodes, and brain after subacute inhalation and showed biopersistence regardless of AuNP single exposure or AuNP + AgNP co-exposure, showing similar elimination half-time. In contrast, Ag was translocated to the tissues and rapidly eliminated from the tissues regardless of AuNP co-exposure. Ag was continually accumulated in the olfactory bulb and brain and persistent until PEO-28. CONCLUSION: Our co-exposure study of AuNP and AgNP indicated that soluble AgNP and insoluble AuNP translocated differently, showing soluble AgNP could be dissolved into Ag ion to translocate to the extrapulmonary organs and rapidly removed from most organs except the brain and olfactory bulb. Insoluble AuNPs were continually translocated to the extrapulmonary organs, and they were not eliminated rapidly.

Dissolution kinetics of silver nanoparticles: Behaviour in simulated biological fluids and synthetic environmental media.

Silver nanoparticles offer a wide range of benefits including their application in several fields such as medical, food, health care, consumer, and industrial purposes. However, unlocking this potential requires a responsible and co-ordinated approach to ensure that potential challenges emanating from the use of silver nanoparticles are being addressed. In this study body fluids and environmental media were used to investigate the effects of citrate coated silver nanoparticles (cit-coated AgNPs) to mimic their behaviour in real life situations. Understanding the dissolution kinetics and behaviour of cit-coated AgNPs in simulated biological fluids and synthetic environmental media helps us predict their fate and effects on human health and the environment. The cit-coated AgNPs behaviour significantly varied in acidic and alkaline simulated fluids. Low pH and high ionic strength accelerated the rate and degree of dissolution of AgNPs in simulated fluids. Following exposure to simulated fluids cit-coated AgNPs demonstrated significant changes in agglomeration state and particle reactivity however, the morphology remained unaltered. The slow dissolution rates observed for highly agglomerated cit-coated AgNPs in simulated blood plasma, Gamble's and intestinal fluids, and freshwater indicate that there is a greater likelihood that the particles will be the cause of the observed adverse effects. In contrast, the fast dissolution rates observed for cit-coated AgNPs in simulated gastric and phagolysosomal fluid and synthetic seawater, the release of the silver ions at a fast rate, will be the cause of their short-term effects.

Animal Welfare Considerations When Conducting OECD Test Guideline Inhalation and Toxicokinetic Studies for Nanomaterials.

The OECD test guidelines for animal experiments play an important role in evaluating the chemical hazards. Animal tests performed using OECD guidelines, especially when the good laboratory practice (GLP) principle is applied, reduce the duplication of toxicity testing and ensure the best mutual acceptance of data by the OECD's Mutual Acceptance of Data (MAD). The OECD inhalation toxicity test guidelines 412 (28 days) and 413 (90 days) have been revised. These OECD guidelines now reflect the inclusion of nanomaterials and recent scientific and technological developments. In particular, these test guidelines aim to evaluate the bronchoalveolar lavage fluid in the lungs for objective toxicity evaluation, along with the existing subjective histopathological evaluation. For solid particles, the lung burden measurement of particles is required for toxicokinetic studies and, in order to properly perform a toxicokinetic study, two post-exposure observations are recommended. In light of the revised OECD guidelines, we propose a method to reduce the number of animals when testing is conducted for nanomaterials.

The Acute and Short-Term Inhalation of Carbon Nanofiber in Sprague-Dawley Rats.

The inhalation toxicity of carbon nanofibers (CNFs) is not clearly known due to relatively few related studies reported. An acute inhalation study and short-term inhalation study (5 days) were therefore conducted using Sprague-Dawley rats. In the acute inhalation study, the rats were grouped and exposed to a fresh air control or to low (0.238 ± 0.197), moderate (1.935 ± 0.159), or high (24.696 ± 6.336 mg/m3) CNF concentrations for 6 h and thereafter sacrificed at 14 days. For the short-term inhalation study, the rats were grouped and exposed to a fresh air control or low (0.593 ± 0.019), moderate (2.487 ± 0.213), or high (10.345 ± 0.541 mg/m3) CNF concentrations for 6 h/day for 5 days and sacrificed at 1, 3, and 21 days post-exposure. No mortality was observed in the acute inhalation study. Thus, the CNF LC50 was higher than 25 mg/m3. No significant body or organ weight changes were noted during the 5 days short-term inhalation study or during the post-exposure period. No significant effects of toxicological importance were observed in the hematological, blood biochemical, and coagulation tests. In addition, the bronchoalveolar lavage (BAL) fluid cell differential counts and BAL inflammatory markers showed no CNF-exposure-relevant changes. The histopathological examination also found no CNF-exposure-relevant histopathological lesions. Thus, neither acute nor 5 days inhalation exposure to CNFs induced any noticeable toxicological responses.

Dissolution of titanium dioxide nanoparticles in synthetic biological and environmental media to predict their biodurability and persistence.

Investigating the biodurability and persistence of titanium dioxide nanoparticles (TiO2 NPs) is of paramount importance because these parameters influence the particles' impact on human health and the environment. Contrary to most research conducted so far, the present study elucidates the dissolution kinetics, namely the dissolution rates, rate constants, order of reaction and half-times of TiO2 NPs in five different simulated biological fluids and two synthetic environmental media to predict their behaviour in real life situations. Results have shown that the dissolution of TiO2 NPs in all simulated fluids was limited. Of all the simulated biological media tested, acidic media such as phagolysosomal and gastric fluid produced the highest dissolution of TiO2 NPs compared to alkaline media such as blood plasma, Gamble's fluid, and intestinal fluid. Furthermore, when the particles were exposed to simulated environmental conditions, the dissolution was higher in high ionic strength seawater compared to freshwater. The dissolution kinetics of titanium dioxide nanoparticles followed first order reaction kinetics and were generally characterized by low dissolution rates and long half-times. These findings indicate that TiO2 NPs are very insoluble and will remain unchanged in the body and environment over long periods of time. Therefore, these particles are most likely to cause both short and long-term health effects and will remain persistent following release into the environment.

Exposure Assessment of Silver and Gold Nanoparticles Generated During the Synthesis Process in a South African Research Laboratory.

During the synthesis of engineered nanomaterials (ENMs), various occupational exposures occur, leading to health consequences. To date, there is paucity of studies focused on modeling the deposition of nanoparticles emitted from ENMs synthesis processes. This study aimed to characterise and assess exposure to gold (AuNPs) and silver nanoparticles (AgNPs) during a synthesis process in a research laboratory in South Africa. AuNPs and AgNPs synthesis processes were monitored for an hour in a laboratory using a Scanning Mobility Particle Sizer. The monitoring was conducted at a height of 1.2-1.5 m (m) and 1.5 m away from the hood, assuming a 30 cm (cm) breathing circumference zone. Each synthesis process was monitored thrice to generate reliable point estimates, which were used to assess exposure over 8 hours. A time-weighted average concentration was calculated and compared to the derived 8-h occupational exposure limit (OEL) for AgNPs (0.19 µg/m3) and the proposed provisional nano reference value for AuNPs (20,000 particles/cm3). The Multiple-Path Particle Dosimetry model was used to calculate the deposition and retention of both AuNPs and AgNPs. NPs emitted during the synthesis process were dominant in the nuclei (79% for AuNPs and 54% for AgNPs), followed by the Aitken (12% for AuNPs and 29% for AgNPs), with fewer particles in the accumulation mode (9.2% for AuNPs and 17% for AgNPs). AuNPs and AgNPs generated during the synthesis process were determined at 1617.3 ± 102 cm3 (0.046 µg/m3) and 2,687 cm3 ± 620 (0.077 µg/m3), respectively. For the three exposure scenarios, none exceeded the occupational exposure limit for both AuNPs (provisional) and AgNPs (OEL). Workers in the synthesis laboratory are exposed to a concentration below the recommended occupational exposure limit for silver and the proposed provisional nano reference value for gold. Although, the concentrations to which laboratory workers are exposed to are below safe levels, the assessment of the lung deposition patterns indicate a high particle lung retention which raise concerns about long term safety of workers.

On-Site Deployment of an Air-Liquid-Interphase Device to Assess Health Hazard Potency of Airborne Workplace Contaminants: The Case of 3-D Printers.

Biomonitoring of workers is an approach of evaluating workers' exposure to chemicals and particulate matter by measuring biomarkers of parent chemicals, their metabolites, and reaction products in workers' biospecimens. Prerequisites for biological monitoring in the workplace include permission to enter the workplace, approval of the study plan from the IRB (Institutional Review Board), and obtaining consent from workers. Because of the complex legal process involved in biomonitoring, few studies have been conducted so far on biomonitoring of workers' exposures to nanoparticles and other hazards from emerging materials and advanced nanotechnologies. We have developed a cell-based biomonitoring device that can evaluate acute cytotoxicity and various other effect biomakers, such as inflammation, at realistic workplace exposure. This device is based on air-liquid interphase (ALI) and can be used to evaluate cell toxicity and early effect biomarkers along adverse outcome pathways. Following exposure of A549 lung epithelial cells in ALI to workplace air for 1-2 h, the cells were processed to assess the induction of inflammatory and cell damage biomarkers. Initially, we estimated the deposition rate of nanoparticles in the transwell by exposing the cell-free ALI device to silver nanoparticle aerosols (AgNP 20-30 nm) for 2 h in the laboratory. Then A549 lung epithelial cells cultured on the transwell in the ALI device were exposed to AgNP nanoaerosols for 2 h and evaluated for cytotoxicity and induction of mRNAs of pro-inflammatory cytokines IL-1b, IL-6, and TNF-α. Then the cells in the ALI device were exposed to 3-D printer emissions at the workplace and evaluated for the same matched endpoints. The mRNA levels for IL-1b, IL-6, and TNF-α increased significantly at the end of 2-h exposure of A549 cells to the positive control AgNP aerosols. These mRNAs, as well as LDH and microprotein concentrations, increased even more after 24-h post-exposure incubation (p < 0.05). Cytotoxicity evaluation of 3-D printer emissions at 810 and 957 µg/m3, which was more than 80 times higher than the airborne total suspended particulate concentrations in the workplace air (9-12.5 µg/m3), suggested no significant acute cytotoxicity at the end of 2-h exposure to 3-D-printing emission, as well as at 24-h post-exposure incubation. Hyperspectral microscopic observation showed that 3-D printers emitted particles to be attached to A549 cells after 2-h exposure, and many particles were internalized by A549 cells after 24 h of post-exposure incubation. The mRNA expression of pro-inflammatory cytokine IL-1b and IL-6 increased significantly after 2-h exposure to 3-D printer emissions and after 24-h incubation (only IL-6). In contrast, the expression of TNF-α mRNA decreased significantly after 2 h of exposure to 3-D printers and decreased even more after 24-h post-exposure incubation. These results support the use of cell-based ALI devices for direct assessment of airborne hazards in the workplace, for probing toxicological properties of airborne contaminants using adverse molecular pathways, and for guiding study design for workplace biomonitoring. ALI devices can bridge conventional exposure assessment with cellular toxicity testing platforms for hazard and risk assessment.

Mechanisms facilitating the uptake of carboxyl-polythene glycol-functionalized gold nanoparticles into multicellular spheroids.

OBJECTIVES: Nanomedicines represent theragnostic alternatives to traditional candidate drugs, with increased targeting and delivery potential due to their size and functional tailorability. Biological activity typically relies on nanomaterials permeating into the intracellular environment, necessitating characterization of uptake and intracellular trafficking pathways. Spheroids' three-dimensional architecture and heterogenous cellular distribution offer an in-vivo-representative platform to assess the biological activity of nanoparticles (NPs). This study aimed to develop an A549 alveolar carcinoma spheroid model as a NP uptake assessment platform for carboxyl-polythene glycol-functionalized gold NPs affording further biological characterization opportunities in nanomedicine. METHODS: A549 spheroids were generated via the liquid overlay method, and their morphology and viability were assessed for 21 days. Cytotoxicity was assessed via lactate dehydrogenase release. NP uptake was elucidated using uptake pathway inhibition, combined with CytoViva hyperspectral imaging of sectioned spheroids to count internalized NPs. KEY FINDINGS: Cytotoxicity was absent for all exposure groups. Clathrin-mediated endocytosis was the primary endocytic mechanism (33.5-54.8% of uptake), which may precede lysosomal degradation. Lysosomal membrane permeabilization appears to be a potential downstream application. Low penetration into spheroids (4.5 µm) suggests the failure of NPs to traverse cellular layers in the spheroid. CONCLUSIONS: Although poor uptake was observed, a multicellular spheroid model of A549 alveolar carcinoma cells was established, allowing for similar future uptake assessment of various NPs.

The use of HRM shifts in qPCR to investigate a much neglected aspect of interference by intracellular nanoparticles.

Genetic molecular studies used to understand potential risks of engineered nanomaterials (ENMs) are incomplete. Intracellular residual ENMs present in biological samples may cause assay interference. This report applies the high-resolution melt (HRM) feature of RT-qPCR to detect shifts caused by the presence of gold nanoparticles (AuNPs). A universal RNA standard (untreated control) sample was spiked with known amounts of AuNPs and reverse transcribed, where 10 reference genes were amplified. The amplification plots, dissociation assay (melt) profiles, electrophoretic profiles and HRM difference curves were analysed and detected interference caused by AuNPs, which differed according to the amount of AuNP present (i.e. semi-quantitative). Whether or not the assay interference was specific to the reverse transcription or the PCR amplification step was tested. The study was extended to a target gene-of-interest (GOI), Caspase 7. Also, the effect on in vitro cellular samples was assessed (for reference genes and Caspase 7). This method can screen for the presence of AuNPs in RNA samples, which were isolated from biological material in contact with the nanomaterials, i.e., during exposure and risk assessment studies. This is an important quality control procedure to be implemented when quantifying the expression of a GOI from samples that have been in contact with various ENMs. It is recommended to further examine 18S, PPIA and TBP since these were the most reliable for detecting shifts in the difference curves, irrespective of the source of the RNA, or, the point at which the different AuNPs interacted with the assay.

Methods, models, mechanisms and metadata: Introducing the Nanotoxicology collection at F1000Research.

Nanotoxicology is a relatively new field of research concerning the study and application of nanomaterials to evaluate the potential for harmful effects in parallel with the development of applications. Nanotoxicology as a field spans materials synthesis and characterisation, assessment of fate and behaviour, exposure science, toxicology / ecotoxicology, molecular biology and toxicogenomics, epidemiology, safe and sustainable by design approaches, and chemoinformatics and nanoinformatics, thus requiring scientists to work collaboratively, often outside their core expertise area. This interdisciplinarity can lead to challenges in terms of interpretation and reporting, and calls for a platform for sharing of best-practice in nanotoxicology research. The F1000Research Nanotoxicology collection, introduced via this editorial, will provide a place to share accumulated best practice, via original research reports including no-effects studies, protocols and methods papers, software reports and living systematic reviews, which can be updated as new knowledge emerges or as the domain of applicability of the method, model or software is expanded. This editorial introduces the Nanotoxicology Collection in F1000Research. The aim of the collection is to provide an open access platform for nanotoxicology researchers, to support an improved culture of data sharing and documentation of evolving protocols, biological and computational models, software tools and datasets, that can be applied and built upon to develop predictive models and move towards in silico nanotoxicology and nanoinformatics. Submissions will be assessed for fit to the collection and subjected to the F1000Research open peer review process.

Issues and Challenges in the Application of the IEUBK Model in the Health Risk Assessment of Lead: A Case Study from Blantyre Malawi.

The risk assessment of lead (Pb) requires the use of biokinetic models to translate measured concentrations of Pb in food and environmental media into blood lead (BPb). The aim of this study was to assess the applicability of the Integrated Exposure Uptake Biokinetic (IEUBK) model in the health risk assessment of Pb among children in Blantyre. Children (152) aged 1-6 years were recruited into this cross-sectional study, and foods, house dust, playground soil, water, and venous blood (1 mL) were collected and analyzed for Pb. A seven-day food frequency questionnaire (FFQ) was used to collect food consumption data. The concentrations of Pb ranged from 0.01 to 3.3 mg/kg in food, 2.3 to 265 mg/kg and 1.5 to 482 mg/kg in house dust and playground soil, respectively, as well as 2.0 µg/dL to 50.4 µg/dL and 6.8 to 39.2 µg/dL for measured and predicted BPb, respectively. Various statistical tests indicated less than satisfactory agreement between measured and predicted BPb values. Despite the lack of reliable food consumption data and other limitations, both the predicted and measured BPb values indicate that children in Blantyre are exposed to high levels of Pb, largely through food and soil as a minor source.

Importance of Surface Topography in Both Biological Activity and Catalysis of Nanomaterials: Can Catalysis by Design Guide Safe by Design?

It is acknowledged that the physicochemical properties of nanomaterials (NMs) have an impact on their toxicity and, eventually, their pathogenicity. These properties may include the NMs' surface chemical composition, size, shape, surface charge, surface area, and surface coating with ligands (which can carry different functional groups as well as proteins). Nanotopography, defined as the specific surface features at the nanoscopic scale, is not widely acknowledged as an important physicochemical property. It is known that the size and shape of NMs determine their nanotopography which, in turn, determines their surface area and their active sites. Nanotopography may also influence the extent of dissolution of NMs and their ability to adsorb atoms and molecules such as proteins. Consequently, the surface atoms (due to their nanotopography) can influence the orientation of proteins as well as their denaturation. However, although it is of great importance, the role of surface topography (nanotopography) in nanotoxicity is not much considered. Many of the issues that relate to nanotopography have much in common with the fundamental principles underlying classic catalysis. Although these were developed over many decades, there have been recent important and remarkable improvements in the development and study of catalysts. These have been brought about by new techniques that have allowed for study at the nanoscopic scale. Furthermore, the issue of quantum confinement by nanosized particles is now seen as an important issue in studying nanoparticles (NPs). In catalysis, the manipulation of a surface to create active surface sites that enhance interactions with external molecules and atoms has much in common with the interaction of NP surfaces with proteins, viruses, and bacteria with the same active surface sites of NMs. By reviewing the role that surface nanotopography plays in defining many of the NMs' surface properties, it reveals the need for its consideration as an important physicochemical property in descriptive and predictive toxicology. Through the manipulation of surface topography, and by using principles developed in catalysis, it may also be possible to make safe-by-design NMs with a reduction of the surface properties which contribute to their toxicity.

Safe by design (SbD) and nanotechnology: a much-discussed topic with a prudence?

Safe-by-Design (SbD) has been put forward as a concept to assure that only safe nanomaterials will reach the market and that safety aspects have already been considered in a very early stage of the innovation process. In practice, several laboratory test have been proposed to screen newly developed nanomaterials and nano-enabled products to assess their hazardous nature. These tests need to have sufficient predictive power for possible adverse effects on human health, not only due to acute (peak) exposures, but also for long-term (low dose) exposures as these materials may accumulate over time in organs and tissues.

Lung retention and particokinetics of silver and gold nanoparticles in rats following subacute inhalation co-exposure.

BACKGROUND: Inhalation exposure to nanomaterials in workplaces can include a mixture of multiple nanoparticles. Such ambient nanoparticles can be of high dissolution or low dissolution in vivo and we wished to determine whether co-exposure to particles with different dissolution rates affects their biokinetics. METHODS AND RESULTS: Rats were exposed to biosoluble silver nanoparticles (AgNPs, 10.86 nm) and to biopersistent gold nanoparticles (AuNPs, 10.82 nm) for 28 days (6-h/day, 5-days/week for 4 weeks) either with separate NP inhalation exposures or with combined co-exposure. The separate NPs mass concentrations estimated by the differential mobility analyzer system (DMAS) were determined to be 17.68 ± 1.69 µg/m3 for AuNP and 10.12 ± 0.71 µg/m3 for AgNP. In addition, mass concentrations analyzed by atomic absorption spectrometer (AAS) via filter sampling were for AuNP 19.34 ± 2.55 µg/m3 and AgNP 17.38 ± 1.88 µg/m3 for separate exposure and AuNP 8.20 ± 1.05 µg/m3 and AgNP 8.99 ± 1.77 µg/m3 for co-exposure. Lung retention and clearance were determined on day 1 (6-h) of exposure (E-1) and on post-exposure days 1, 7, and 28 (PEO-1, PEO-7, and PEO-28, respectively). While the AgNP and AuNP deposition rates were determined to be similar due to the similarity of NP size of both aerosols, the retention half-times and clearance rates differed due to the difference in dissolution rates. Thus, when comparing the lung burdens following separate exposures, the AgNP retention was 10 times less than the AuNP retention at 6-h (E-1), and 69, 89, and 121 times lower less than the AuNP retention at PEO-1, PEO-7, and PEO-28, respectively. In the case of AuNP+AgNP co-exposure, the retained AgNP lung burden was 14 times less than the retained AuNP lung burden at E-1, and 26, 43, and 55 times less than the retained AuNP lung burden at PEO-1, PEO-7, and PEO-28, respectively. The retention of AuNP was not affected by the presence of AgNP, but AgNP retention was influenced in the presence of AuNP starting at 24 h after the first day of post day of exposure. The clearance of AgNPs of the separate exposure showed 2 phases; fast (T1/2 3.1 days) and slow (T1/2 48.5 days), while the clearance of AuNPs only showed one phase (T1/2 .81.5 days). For the co-exposure of AuNPs+AgNPs, the clearance of AgNPs also showed 2 phases; fast (T1/2 2.2 days) and slow (T1/2 28.4 days), while the clearance of AuNPs consistently showed one phase (T1/2 54.2 days). The percentage of Ag lung burden in the fast and slow clearing lung compartment was different between separate and combined exposure. For the combined exposure, the slow and fast compartments were each 50% of the lung burden. For the single exposure, 1/3 of the lung burden was cleared by the fast rate and 2/3 of the lung burden by the slow rate. CONCLUSIONS: The clearance of AgNPs follows a two- phase model of fast and slow dissolution rates while the clearance of AuNPs could be described by a one- phase model with a longer half-time. The co-exposure of AuNPs+AgNPs showed that the clearance of AgNPs was altered by the presence of AuNPs perhaps due to some interaction between AgNP and AuNP affecting dissolution and/or mechanical clearance of AgNP in vivo.

Assessment and Mitigation of Exposure of 3-D Printer Emissions.

This study monitored particulates, and volatile organic compounds (VOCs) emitted from 3-D printers using acrylonitrile-butadiene-styrene copolymer (ABS) filaments at a workplace to assess exposure before and after introducing exposure mitigation measures. Air samples were collected in the printing room and adjacent corridor, and real-time measurements of ultrafine and fine particle were also conducted. Extensive physicochemical characterizations of 3-D printer emissions were performed, including real-time (size distribution, number concentration) nanoparticle characterization, size-fractionated mass distribution and concentration, as well as chemical composition for metals by ICP-MS and VOCs by GC-FID, real-time VOC monitors, and proton-transfer-reaction time-of-flight mass spectrometer (PTR-TOF-MS). Air sampling showed low levels of total suspended particulates (TSP, 9-12.5/m3), minimal levels (1.93-4 ppm) of total volatile organic chemicals (TVOC), and formaldehyde (2.5-21.7 ppb). Various harmful gases, such as formaldehyde, acrolein, acetone, hexane, styrene, toluene, and trimethylamine, were detected at concentrations in the 1-100 ppb by PTR-TOF-MS when air sample was collected into the Tedlar bag from the front of the 3-D printer. Ultrafine particles having an average particle size (30 nm count median diameter and 71 nm mass median diameter) increased during the 3-D printing operation. They decreased to the background level after the 3-D printing operation, while fine particles continually increased after the termination of 3-D printing to the next day morning. The exposure to 3-D printer emissions was greatly reduced after isolating 3-D printers in the enclosed space. Particle number concentration measured by real-time particle counters (DMAS and OPC) were greatly reduced after isolating 3-D printers to the isolated place.

Intracellular and extracellular targets as mechanisms of cancer therapy by nanomaterials in relation to their physicochemical properties.

Cancer nanomedicine has evolved in recent years and is only expected to increase due to the ease with which nanomaterials (NMs) may be manipulated to the advantage of the cancer patient. The success of nanomedicine is dependent on the cell death mechanism, which in turn is dependent on the organelle initially targeted. The success of cancer nanomedicine is also dependent on other cellular mechanisms such as the induction of autophagy dysfunction, manipulation of the tumor microenvironment (TME) and secretome or induction of host immune responses. Current cancer phototherapies for example, photothermal- or photodynamic therapies as well as radio enhancement also form a major part of cancer nanomedicine. In general, cancer nanomedicine may be grouped into those NMs exhibiting inherent anti-cancer properties that is, self-therapeutic NMs (Group 1), NMs leading to localization of phototherapies or radio-enhancement (Group 2), and NMs as nanocarriers in the absence or presence of external radiation (Group 3). The recent advances of these three groups, together with their advantages and disadvantages as well as their cellular mechanisms and ultimate outcomes are summarized in this review. By exploiting these different intracellular mechanisms involved in initiating cell death pathways, it is possible to synthesize NMs that may have the desirable characteristics to maximize their efficacy in cancer therapy. Therefore, a summary of these important physicochemical characteristics is also presented that need to be considered for optimal cancer cell targeting and initiation of mechanisms that will lead to cancerous cell death. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine.