RESUMEN
We present two prescriptions for broadband ($ {\sim} 77 - 252\;{\rm GHz} $), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements-in our case, 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of commercially available, polytetrafluoroethylene-based, dielectric sheet material. The lenslet coating is molded to fit the 150 mm diameter arrays directly, while the large-diameter lenses are coated using a tiled approach. We review the fabrication processes for both prescriptions, then discuss laboratory measurements of their transmittance and reflectance. In addition, we present the inferred refractive indices and loss tangents for the coating materials and the aluminum oxide substrate. We find that at 150 GHz and 300 K the large-format coating sample achieves $ (97 \pm 2)\% $ transmittance, and the lenslet coating sample achieves $ (94 \pm 3)\% $ transmittance.
RESUMEN
The use of hot-melt extrusion for preparing homogeneous API-excipient mixtures is studied for miconazole-PEG-g-PVA [poly(ethylene glycol)-poly(vinyl alcohol) graft copolymer] solid dispersions with a 5 cm(3) table-top, twin-screw corotating microcompounder (DSM Xplore). Phase behavior of PEG-g-PVA, miscibility of miconazole in PEG-g-PVA and the partitioning of miconazole between PEG and PVA amorphous phases are characterized using a combination of modulated DSC, XRPD, and solid-state (1)H and (13)C NMR methods. The (1)H NMR transverse magnetization relaxation (T(2) relaxation) method is used to analyze the phase composition and molecular mobility of the copolymer. The T(2) relaxation decay of pure PEG-g-PVA can be described by four T(2) relaxation components in the temperature range studied. PVA crystallinity is not largely affected by hot-melt extrusion and the presence of the drug. Miconazole preferably resides in the PEG amorphous phase, and its molecules are well dispersed in the PEG-g-PVA matrix using hot-melt extrusion mixing. Miconazole forms amorphous nanoclusters whose average size equals approximately 1.6 nm, indicating solid solution formation (molecular level dispersion) of the drug in the polymer.