The response of physiological and xylem anatomical traits under cadmium stress in Pinus thunbergii seedlings.

Studying the response of physiological and xylem anatomical traits under cadmium stress is helpful to understand plants' response to heavy metal stress. Here, seedlings of Pinus thunbergii Parl. were treated with 50, 100 and 150 mg kg-1 Cd2+ for 28 days. Cadmium and nonstructural carbohydrate content of leaves, stems and roots, root Cd2+ flux, cadmium distribution pattern in stem xylem and phloem, stem xylem hydraulic traits, cell wall component fractions of stems and roots, phytohormonal content such as abscisic acid, gibberellic acid 3, molecule -indole-3-acetic acid, and jasmonic acid from both leaves and roots, as well as xylem anatomical traits from both stems and roots were measured. Root Cd2+ flux increased from 50 to 100 mmol L-1 Cd2+ stress, however it decreased at 150 mmol L-1 Cd2+. Cellulose and hemicellulose in leaves, stems and roots did not change significantly under cadmium stress, while pectin decreased significantly. The nonstructural carbohydrate content of both leaves and stems showed significant changes under cadmium stress while the root nonstructural carbohydrate content was not affected. In both leaves and roots, the abscisic acid content significantly increased under cadmium stress, while the gibberellic acid 3, indole-3-acetic acid and jasmonic acid methylester content significantly decreased. Both xylem specific hydraulic conductivity and xylem water potential decreased with cadmium stress, however tracheid diameter and double wall thickness of the stems and roots were not affected. High cadmium intensity was found in both the stem xylem and phloem in all cadmium stressed treatments. Our study highlighted the in situ observation of cadmium distribution in both the xylem and phloem, and demonstrated the instant response of physiological traits such as xylem water potential, xylem specific hydraulic conductivity, root Cd2+ flux, nonstructural carbohydrate content, as well as phytohormonal content under cadmium stress, and the less affected traits such as xylem anatomical traits, cellulose and hemicellulose.

Synchronous filtering method for improving the optical signal-to-noise ratio of a tunable laser based on the Fabry-Pérot interferometer.

Optical measurements are closely related to the optical signal-to-noise ratio (OSNR) of the laser, which can be improved using a tunable optical filter (TOF) to suppress frequency noise. For an external-cavity tunable laser with a tuning range larger than the TOF bandwidth, the wavelength at the center of the TOF passband must be varied based on the laser tuning. This study proposes a tunable-laser OSNR-enhancement method based on the Fabry-Pérot (FP) interferometer. The FP signal contains the wavelength information of the swept laser, which can be used to determine the real-time driving voltage of the TOF. Notably, the laser needs to be continuously tunable without mode hopping, and the free spectral range of the FP interferometer must be smaller than the TOF bandwidth.

Soil health improvement by inoculation of indigenous microalgae in saline soil.

Using biological methods to improve saline soils is recognized as an eco-friendly and sustainable way. In this study, two indigenous algae YJ-1 and YJ-2 screened from salinized farmland were inoculated into saline soils with different salinization levels to investigate their potential in enhancing soil health by laboratory microcosm experiment. The results showed that individual inoculation of the two algae quickly resulted in the formation of algal crusts, and the chlorophyll content in the saline soils gradually increased with the incubation time. The soil pH decreased significantly from the initial 8.15-9.45 to 6.97-7.56 after 60-day incubation. The exopolysaccharides secretion and the activities of catalase, sucrase, and urease in saline soils also increased. Microalgal inoculation increased soil organic matter storage, while decreasing the available nutrient contents possibly due to the depletion of microalgal growth. PCA and PCC results identified that microalgal biomass as the predominant variable affecting soil quality. Overall, these data revealed the great potential of microalgae in the amelioration of saline soils, especially in pH reduction and enzyme activity enhancement. This study will provide the theoretical foundation for improving saline soils via algalization.

MXene/Cellulose Hydrogel Composites: Preparation and Adsorption Properties of Pb2.

In this work, acrylic cellulose hydrogel, a typical natural polymer adsorbent, was modified using MXene through in situ polymerization to create a synthetic inorganic-polymer composite known as MXene/cellulose hydrogel. FTIR, XRD, SEM, and thermogravimetric analyses were applied to characterize the chemical structure and micromorphology. The MXene/cellulose hydrogel was utilized for the removal of Pb2+ from wastewater. Under optimal experimental conditions (initial Pb2+ concentration of 0.04 mol/L, adsorption time of 150 min, pH = 5.5, and MXene doping content of 50% at 30 °C), a maximum adsorption capacity of 410.57 mg/g was achieved. The MXene/cellulose hydrogel corresponded with the pseudo-second-order kinetic equation model and exhibited a better fit with the Freundlich isotherm model.

Microbial weathering of montmorillonite and its implication for Cd(II) immobilization.

Interactions between silicate bacteria and silicates are very common in nature and hold great potential in altering their mutual physicochemical properties. But their interactions in regulating contaminants remediation involving performance and mechanisms are often overlooked. Here, we focused on the interactions between silicate bacteria (Paenibacillus polymyxa, PP; Bacillus circulans, BC) and a soil silicate montmorillonite (Mt), and their impact on Cd(II) immobilization. The obtained results showed that Mt greatly promoted the growth of the bacteria, resulting in a maximum 10.31 times increase in biomass production. In return, the bacteria strongly enhanced the Cd(II) adsorption on Mt, with adsorption capacities increased by 80.61%-104.45% in comparison to the raw Mt. Additionally, the bacteria-Mt interaction changed Cd(II) to a more stabilized state with a maximum reduction of 38.90%/g Mt in bioavailability. The enhancement of Cd(II) adsorption and immobilization on the bacterial modified Mt was caused by the following aspects: (1) the bacteria activities altered the aggregation state of Mt and made it better dispersed, thus more active sites were exposed; (2) the microbial activities brought about more rough and crumpled surface, as well as smaller Mt fragments; (3) a variety of microbial-derived functional groups were introduced onto the Mt surface, increasing its affinity for heavy metals; (4) the main Cd(II) immobilization mechanism was changed from ion exchange to the combination of ion exchange and functional groups induced adsorption. This work elucidates the potential ecological and evolutionary processes of silicate bacteria-soil clay mineral interactions, and bears direct implications for the clay-mediated bioremediation of heavy metals in natural environments.

Enhance antimony adsorption from aquatic environment by microwave-assisted prepared Fe3O4 nanospherolites.

A novel hierarchically nanostructured magnetite (Fe3O4) was manufactured using microwave-assisted reflux method without surfactants. The nanostructured Fe3O4 is formed via the co-precipitation of Fe(III) and Fe(II), followed by a nanocrystal aggregation-based mechanism. Moreover, the effects of solution pH, contact time, initial Sb concentration, coexisting anions, and recycle numbers on the adsorption of nanostructured Fe3O4 toward Sb were extensively examined in the batch adsorption tests. The results demonstrated that the obtained Fe3O4 exhibited excellent adsorption ability toward Sb with the maximum adsorption capacities of 154.2 and 161.1 mg.g-1 for Sb(III) and Sb(V), respectively. The prepared Fe3O4 could be easily regenerated and reused for adsorption/desorption studies multiple times without compromising the Sb adsorption ability. Further exploration indicated that the oxidation or reduction reactions infrequently occurred during Sb adsorption processes. The proposed hierarchically nanostructured Fe3O4 thus could be potentially used for sustainable and efficient antimony removal.

High-precision phase retrieval method for speckle suppression based on optimized modulation masks.

Traditional methods of coherent diffraction imaging using random masks result in an insufficient difference between the diffraction patterns, making it challenging to form a strong amplitude constraint, causing significant speckle noise in the measurement results. Hence, this study proposes an optimized mask design method combining random and Fresnel masks. Increasing the difference between diffraction intensity patterns enhances the amplitude constraint, suppresses the speckle noise effectively, and improves the phase recovery accuracy. The numerical distribution of the modulation masks is optimized by adjusting the combination ratio of the two mask modes. The simulation and physical experiments show that the reconstruction results of PSNR and SSIM using the proposed method are higher than those using random masks, and the speckle noises are effectively reduced.

Performance of heavy metal-immobilizing bacteria combined with biochar on remediation of cadmium and lead co-contaminated soil.

Heavy metal pollution of soil has become a public concern worldwide since it threats food safety and human health. Sustainable and environmental-friendly remediation technology is urgently needed. Therefore, we investigated the properties and heavy metal removal ability of Enterobacter asburiae G3 (G3), Enterobacter tabaci I12 (I12), and explored the feasibility of remediation Cd, Pb co-contaminated soil by the combination of G3/I12 and biochar. Our results indicated that both strains are highly resistant to Cd, Pb and maintain plant growth-promoting properties. The removal efficiency of G3 for Cd and Pb were 76.79-99.43%, respectively, while the removal efficiency of I12 for Cd and Pb were 62.57-99.55%, respectively. SEM-EDS and XRD analysis revealed that the morphological and structural changes occurred upon heavy metal exposure, metal precipitates were also detected on cell surface. FTIR analysis indicated that functional groups (-OH, -N-H, -C = O, -C-N, -PO4) were involved in Cd/Pb immobilization. Application of the bacteria, biochar, or their combination decreased the acid-extractable Cd, Pb in soil while increased the residual fractions, meanwhile, the bioavailability of both metal elements declined. Besides, these treatments increased soil enzyme (sucrase, catalase and urease) activity and accelerated pakchoi growth, heavy metal accumulation in pakchoi was depressed upon bacteria and/or biochar application, and a synergistic effect was detected when applying bacteria and biochar together. In BC + G3 and BC + I12 treated plants, the Cd and Pb accumulation decreased by 24.42% and 52.19%, 17.55% and 47.36%, respectively. Overall, our study provides an eco-friendly and promising in situ technology that could be applied in heavy metal remediation.

Effect of organic acids and soil particle size on heavy metal removal from bulk soil with washing.

To evaluate the effect of soil particle size on heavy metals removal by washing, two soil samples were collected around a lead-zinc mining area (SM) and lead-zinc smelter (SS). The total content of Cd, Pb and Zn in SM and SS were determined. And the effect of soil particle size on Cd removal by low molecular organic acids was studied. The results showed that Cd was the main pollutant and the total content of Cd in SS can reach to 24.8 mg Kg-1. 68.4% of the total Cd in SM existed in the form of residual state, while 54.7% of the total Cd in SS was in weak acid extractable state. About 50.0% of the Cd distributed in < 2 µm soil size fraction. The washing results indicated that citric acid was a highly efficient eluent among the five low molecular weight organic acids (citric acid, malic acid, tartaric acid, oxalic acid and acetic acid). After washing, 40% and 69.6% of the total Cd in SS and SM can be removed by citric acid, respectively. While only 18.7-40.2% and 32.6-68.7% of Cd was removed from different size fractions of SM and SS, respectively. The species of Cd in soil size fractions affected the removal effect of citric acid. The citric acid can easily remove the weak acid extractable and reducible form of Cd in soil. After eluted by citric acid, the bioavailability of Cd in soil decreased markedly, and the highest decreasing rate reached 93%.

Capturing effects of filamentous fungi Aspergillus flavus ZJ-1 on microalgae Chlorella vulgaris WZ-1 and the application of their co-integrated fungi-algae pellets for Cu(II) adsorption.

Using filamentous fungi to capture unicellular microalgae is an effective way for microalgae recovery in water treatment. Here, fungi Aspergillus flavus ZJ-1 and microalgae Chlorella vulgaris WZ-1 isolated from a copper tailings pond were used to study the capture effect of ZJ-1 on WZ-1. The highest capture efficiency (97.85%) was obtained within 6 h under the optimized conditions of 30 °C, 150 rpm, fungi-algae biomass ratio of 2.24:1, and initial pH of 9.24 in microalgae medium. The formed fungi-algae pellets (FAPs) were further used to remove Cu(II) from aqueous solution. Results showed that the FAPs formed at different capture times all adsorbed Cu(II) well, and the PAFs formed within 2 h (PAFs2 h) exhibited the highest Cu(II) adsorption capacity (80.42 mg·g-1). SEM images showed that Cu(II) caused a change in the internal structure of PAFs2 h from loose to compact, the mycelium shrunk, and the microalgal cells were concave. Cu(II) adsorption by PAFs2 h was well conformed to the pseudo-second-order kinetics and the Langmuir isotherm (123.61 mg·g-1 of theoretically maximum adsorption capacity). This work opens a way for applying FAPs in the remediation of heavy metal-contaminated wastewater, and the metal adsorption effect was determined by the capture amount of microalgae.

Amino-modified chitosan/gold tailings composite for selective and highly efficient removal of lead and cadmium from wastewater.

In this work, a novel amino-modified chitosan/tailings composite (CS-PEI-nGT) was successfully synthesized from gold tailings particle treated by ball milling (nGT), chitosan (CS) and polyethyleneimine (PEI) as raw materials, for Lead (Pb(Ⅱ)) and Cadmium (Cd(Ⅱ)) removal from aqueous solutions. The CS-PEI-nGT was characterized by using FTIR, XRD, SEM, BET, TGA and XPS techniques. The results showed that CS-PEI-nGT had maximum adsorption capacity of 192.78 mg·g-1 and 99.46 mg·g-1 for Pb(Ⅱ) and Cd(Ⅱ) respectively at pH 5. The adsorption kinetics was described well by pseudo-second-order kinetic adsorption model, and suggested that chemisorption as the rate-controlling step for adsorption of Pb(Ⅱ) and Cd(Ⅱ). The isotherm data was accurately explained by Langmuir model with higher correlation coefficient (R2) of 0.9911 and 0.9642 for Pb(Ⅱ) and Cd(Ⅱ) respectively. In addition, CS-PEI-nGT retained its selective adsorption capacity for Pb(Ⅱ) and Cd(Ⅱ), compared to other metals such as Zn(Ⅱ), Mn(Ⅱ), Mg(Ⅱ) and Al(Ⅲ). The mechanism of the adsorption was investigated and the results revealed that amino (-NH2), silicon oxide groups (Si-O) and hydroxyl (-OH) functional groups on composite surface were accountable for metals adsorption, suggesting surface complexation, electrostatic interactions and ion exchange. Our work presents a promising strategy for tailings recycling and highly efficient removal of toxic metals ions from wastewater.

Marked changes in biochar's ability to directly immobilize Cd in soil with aging: implication for biochar remediation of Cd-contaminated soil.

To investigate the change in biochar's ability to directly immobilize Cd in soil, a successive wheat cultivation experiment was conducted. Three biochars with different Cd adsorption mechanisms were added to the soils, and a mesh bag was used to separate the soil particles (> 1 µm) from the biochar. The results showed that the ash contents and anionic contents (CO32- and PO43-) of the biochar decreased with the cultivation time, while the oxygen-containing functional group content and CEC of the biochar increased. As a result, the Cd concentration on biochar decreased, by 68.9% for WBC300, while unstable Cd species (acid soluble and reducible fraction of Cd) on biochar increased with successive cultivation, increasing from 3 to 17% for WBC300 in FS. Correspondingly, the ability of biochar to inhibit Cd accumulation in wheat decreased. The results of this study illustrated that the ability of biochar to directly immobilize Cd in soil is not permanent; it gradually decreases with aging in soil. The adsorption mechanism of Cd on biochar changed from precipitation to complexation, and ion exchange processes could be the main reason.

The potential effectiveness of mixed bacteria-loaded biochar/activated carbon to remediate Cd, Pb co-contaminated soil and improve the performance of pakchoi plants.

Cadmium (Cd) and lead (Pb) are toxic heavy metals that cause severe soil pollution and pose health risks to humans. It is urgent to develop feasible strategies for Pb and Cd remediation. In this study, a bacteria consortium (Enterobacter asburiae G3, Enterobacter tabaci I12 and Klebsiella variicola J2 in a 1:3:3 proportion) with optimal Cd, Pb adsorption ability was constructed and immobilized on biochar (BC)/activated carbon (AC) via physisorption and sodium alginate encapsulation. The effects of mixed bacteria-loaded BC/AC on Cd and Pb remediation were investigated. The results indicated that their application reduced the DTPA-extractable Cd, Pb in soil by 22.05%-55.84% and 31.64%-48.13%, respectively. The residual Pb, Cd were increased while the exchangeable fractions were decreased. Soil urease, catalase and phosphatase activities were enhanced and soil bacterial community was improved, indicating a soil quality improvement. Consequently, the biomass of pakchoi plants was significantly increased. Cd and Pb in the shoots of pakchoi plants were decreased by 28.68%-51.01% and 24.18%-52.87%, respectively. Collectively, the bacteria-loaded BC/AC showed superior performance than free bacteria, BC and AC alone. Our study may provide a better understanding of the development of green and sustainable materials for remediation of heavy metal by the combination of BC/AC and functional bacteria.

Polypyrrole-Bentonite composite as a highly efficient and low cost anionic adsorbent for removing hexavalent molybdenum from wastewater.

The aim of current study was to develop a new material for the fast and efficient removal of hexavalent molybdenum (Mo(VI)) from contaminated water. In this work, a novel adsorbent was synthesized through the polypyrrole intercalation modification of bentonite (PPy-BT) via in-situ chemical polymerization method for effectively removal of Mo(VI) from aqueous solution. The surface morphology and chemical composition of PPy-BT composites were investigated by X-ray diffraction, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectrometer, scanning electron microscopy techniques and X-ray photoelectron spectroscopy. PPy and BT could well resist the aggregation of each other, and therefore resulted in a loose-packed structure and good exposure of active sites. Using materials for the adsorption of Mo(VI) revealed has a maximum adsorption capacity of 100.17 mg/g at 25 °C and pH 4.0 by the Langmuir model. The adsorption kinetics and isotherm data are found to be well elucidated through pseudo-second-order and Langmuir models. Moreover, high regeneration ability (>89.3%) of PPy-BT was noted for five consecutive adsorption-desorption cycles. These findings highlight the potential of PPy-BT for practical water treatment applications. The intercalation material of PPy-BT could provide a new strategy to develop cost-effective clay-based nanomaterials for wastewater treatment.

Incorporating in vitro bioaccessibility into human health risk assessment of heavy metals and metalloid (As) in soil and pak choi (Brassica chinensis L.) from greenhouse vegetable production fields in a megacity in Northwest China.

The rapid development of greenhouse vegetable production (GVP) in densely populated areas may cause the heavy metal/metalloid accumulation in soil and pose a threat to human health. In this study, 180 pairs of topsoil and pak choi (Brassica chinensis L.) samples were collected from GVP fields in Xi'an city in Northwest China to analyze health risks of Cd, Cr, Pb, and As in soil and pak choi combining in vitro bioaccessibility investigation. The results showed that Cd and Cr were common pollutants in both soil and pak choi. In the soil-pak choi system, the indexes of non-carcinogenic and carcinogenic risk for adults and children were 1.53, 2.68, and 1.37 × 10-4, 8.14 × 10-5, respectively, thereby indicating the presence of heavy metal/metalloid health risks for both groups. Based on the results, procedures to mitigate heavy metal/metalloid contamination risks should be discussed more during the development of GVP in the largest city in Northwest China.

Distinct response patterns of bacterial communities in Ag- and ZnO-rGO nanocomposite-amended silt loam soils.

The widespread application of metal-based nanoparticle (MNPs)/reduced graphene oxide (rGO) composites inevitably leads to their release into soils. However, we lack a detailed understanding of the bacterial community response to MNPs-rGO exposure in farmland soils. Here, we conducted a soil microcosm experiment to analyze the potential impact of MNPs-rGO on bacterial communities in two field soils via high-throughput sequencing. The change in alpha diversity of bacterial communities was more susceptible to Ag-rGO and ZnO-rGO treatments than CuO-rGO. In both soils, MNPs-rGO significantly changed the bacterial community structure even at a low dose (1 mg kg-1). The bacterial community structure was most strongly affected by Ag-rGO at 30 days, but the greatest changes occurred in ZnO-rGO at 60 days. The differences in soil properties could shape bacterial communities to MNPs-rGO exposure. Distance-based redundancy analysis and functional annotation of prokaryotic taxa showed that some bacterial species associated with nitrogen cycling were greatly influenced by Ag-rGO and ZnO-rGO exposure. In sum, Ag-rGO and ZnO-rGO may potentially affect bacterial communities and nitrogen turnover under long-term realistic field exposure. These findings present a perspective on the response of bacterial communities to MNPs-rGO and provide a fundamental basis for estimating the ecological behavior of MNPs-rGO.

Cd diminution through microbial mediated degraded lignocellulose maize straw: Batch adsorption and bioavailability trails.

Lignocellulose degraded maize straw (LMS) was prepared with the interaction of soil-indigenous microorganisms and further deployed to attenuate the Cd contamination in polluted soil. The Lignocellulose degrading ratio was determined and results revealed the significant degradation of cellulose, hemicellulose and lignin by 33.03, 26.7 and 15.97% respectively as compared to pristine maize straw (PS). Moreover, LMS was also categorized through FE-SEM, FTIR, BET analysis, elemental analysis and XPS technique and the analytical results indicated that lignocellulose structure in maize straw was successfully degraded and was involved in metal-ion complexation. Batch sorption trials revealed that Cd2+ sorption onto LMS was explained well by Langmuir isotherm and pseudo-second-order kinetic model. The LMS showed maximum adsorption capacities (9.84 mg g-1) for Cd2+ as compared to PS (3.30 mg g-1). Moreover, the soil incubation trials (60 days) depicted the availability of Cd decreased by 11.03 and 34.7% with PS and LMS application respectively. The addition of LMS significantly decreased the exchangeable fractions of Cd and ensued an increase in organic matter and Fe-Mn oxides bound fractions. This work clarified the LMS as a promising amendment for effective remediation of Cd-contaminated matrices.

Effect of exogenous silicon and methyl jasmonate on the alleviation of cadmium-induced phytotoxicity in tomato plants.

In the present study, a hydroponic experiment was performed to evaluate the effect of exogenous silicon (Si) and methyl jasmonate (MeJA) on the mitigation of Cd toxicity in tomato seedlings. The results revealed that Cd-stressed plants exhibited growth inhibition, increased lipid peroxidation, and impaired photosynthetic pigment accumulation. However, Si and MeJA applied alone or in combination significantly ameliorated the above-mentioned adverse effects induced by Cd. Among all treatments, Cd+Si+MeJA treatment elevated the dry mass of roots, stems, and leaves by 317.39%, 110.85%, and 119.71%, respectively. The chlorophyll a, chlorophyll b, and carotenoid contents in Cd+Si+MeJA-treated group were dramatically elevated (p < 0.05). Meanwhile, the malondialdehyde content in roots and shoots were reduced by 32.24% and 69.94%, respectively. The Si and MeJA applied separately or in combination also resulted in a prominent decrease of Cd influxes in tomato roots; therefore, a reduction of Cd content in tomato tissues were detected, and the Cd concentration in tomato roots were decreased by 27.19%, 25.18%, and 17.51% in Cd+Si, Cd+MeJA and Cd+Si+MeJA-treated plants, respectively. Moreover, in Cd+Si+MeJA-treated group, the percentage of Cd in cell wall fraction was enhanced while that in organelle fraction was decreased as compared with Cd-stressed plants. Collectively, our findings indicated that Si and MeJA application provide a beneficial role in enhancing Cd tolerance and reducing Cd uptake in tomato plants.

Mechanism of selective gold adsorption on ion-imprinted chitosan resin modified by thiourea.

Thiourea-modified chitosan-imprinted resin (IM-TUCS) and a corresponding nonimprinted resin (NIM-TUCS) were synthesized and characterized using adsorption experiments. The adsorption results showed that adsorption reached equilibrium within 4 h. The adsorption data were better fitted using the Langmuir model (R2>0.99), and the gold adsorption capacities of IM-TUCS and NIM-TUCS were 933.2 and 373.7 mg·g-1, respectively. The IM-TUCS adsorbent was more suitable for gold than other coexisting anions and cations. The possible mechanism underlying Au(Ⅲ) adsorption on IM-TUCS was further investigated using X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction analyses. The protonation of the amino group on the resin under low pH conditions promoted Au(Ⅲ) adsorption; O, N and S in the C‒OH, CË­S and C-NH2 groups contained in the IM-TUCS coordinated with Au(III) ions. The cross-linking of the imprinted resin provided holes that could hold Au(III), thus the imprinted resin supported more Au(III). The adsorption capacity of the IM-TUCS for Au(III) was significantly higher than that of the NIM-TUCS, which is attributed to the cross-linking of the imprinted resin. Moreover, the IM-TUCS showed specific recognition capabilities for Au(III). After elution with the eluent, IM-TUCS was reused for four cycles with a gold recovery rate of approximately 93%, revealing its high potential economic value.

Study of soil microorganisms modified wheat straw and biochar for reducing cadmium leaching potential and bioavailability.

The application of crops straw and biochar in trace metals remediation from the contaminated environment attracted more and more attention during the past decade. Although there has been some review work on the mechanism of trace metals stabilization by crops straw, the effects and mechanisms of interaction among soil indigenous-microbes and crops-straw for trace metal adsorption and stabilization is still unclear. In this study, the dynamic effects along with potential mechanisms of wheat-straw (WS), wheat-straw biochar (WBC) and biologically modified wheat-straw (BMWS) were conducted to investigate the adsorption, leaching behaviour, chemical fractions and bioavailability of cadmium (Cd). The results showed that the biosorption capacity (qe) was most elevated in the BMWS treatment (14.42 mg g-1) as compared to WBC (6.28 mg g-1) and WS (4.20 mg g-1). The application of BMWS, WBC and WS at the rate of 3% significantly reduced Cd concentration in leachate to 53, 45 and 21% respectively, as compared to control. The addition of BMWS reduced the exchangeable Cd fraction resulted an increase in organic matter and carbonate bound Cd fraction in the soil. The DTPA extractable Cd was significantly decreased by 31.2 and 28.6% with the application of BMWS and WBC at 3% w/w respectively as compared to control. The research results may provide a novel perceptive for the development of functional materials and strategies for eco-friendly and sustainable trace metal remediation in contaminated soil and water by combination of straw and soil-indigenous microorganisms.