Structural, Physicochemical and Digestive Property Changes of Potato Starch after Continuous and Repeated Dry Heat Modification and Its Comparative Study.

To investigate the effects of repeated dry heat treatment (RDH) and continuous dry heat treatment (CDH) on the structure and physicochemical and digestive properties of potato starch, potato starch was treated continuously and repeatedly at 130 °C for 3-18 h. The results showed that the crystalline form of starch was consistent with the original type B. Still, its physicochemical properties, such as swelling power, transparency, peak viscosity (PV), final viscosity (FV), breakdown (BD) and thermal properties (To, Tp, Tc, ΔT), tended to decrease. At the same time, solubility and RS increased after dry heat treatment. Moreover, RDH-treated starches were higher than CDH-treated ones in terms of molecular weight, crystallinity, swelling power, transparency and final viscosity for the same treatment time. Still, there was no significant difference between the thermal properties of the two. Meanwhile, the resistant starch (RS) content showed a downward trend after the peak value of 9 h of CDH treatment and five cycles of RDH treatment with increasing treatment time and the number of cycles, indicating a decrease in the overall digestibility of the starch. Overall, RDH had a more significant effect on potato starch's structure and physicochemical properties than CDH.

Silver-organic coordination networks for magnetic solid-phase extraction of trihalomethanes from environmental water samples: experimental and theoretical calculation study.

Trihalomethanes (THMs) are the primary toxic and carcinogenic byproducts during disinfection of drinking water. THMs have been frequently detected in water body and posed a huge threat to human health. Thus, analyzing the trace levels of THMs in an accurate and rapid method for water quality monitoring is important. In this paper, silver-based organic coordination networks (Ag-OCN) were fabricated with different diameters under mild pH condition. After modification with magnet, Fe3O4 @ Ag-OCN as extractant was applied to the magnetic solid-phase extraction of THMs from water samples. Gas chromatography-tandem mass spectrometry was used for sample quantification and detection. The magnetic extractant displayed good linearity in the range of 0.03-10 ug/L, low limits of detection (1.41-10.13 ng/L), and good reproducibility (relative standard deviations < 6.31%). Moreover, density-functional theory (DFT) calculation was also applied to investigate the possible interaction mechanism. Combining the experimental data with theoretical calculation, results showed that Fe3O4 @ Ag-OCN was a potential magnetic material for the enrichment and extraction of formed THMs at trace levels from water samples.

Composite Material that Comprised Metal-Organic Nanotubes and a Sponge as a High-Performance Adsorbent for the Extraction of Pharmaceuticals and Personal Care Products from Environmental Water Samples.

A composite material that comprised metal-organic nanotubes (MONTs) and a sponge, Cu-MONTs-sponge, was synthesized by using a rapid and convenient surfactant-assisted dip-coating method and used as a high-performance adsorbent for the solid-phase extraction of pharmaceuticals and personal care products (PPCP) from environmental water samples. By adjusting the surfactant concentration, a composite material that contained metal-organic nanotubes and a macroporous 3D porous sponge was constructed. This modified sponge achieved outstanding reproducibility as an adsorbent, with the adsorption of trace or ultratrace amounts of contaminants. Moreover, this composite material was conveniently recycled and its extraction efficiency only decreased by 6.3-12.1 % after 30 adsorption/desorption cycles. The resulting composite exhibited excellent adsorption capacity for PPCPs, which was attributed to its unique porous structure, natural hydrophobicity, and electrostatic interactions between the metal-organic nanotubes and analyte molecules. This Cu-MONTs-sponge material is an ideal adsorbent for the extraction of trace amounts of PPCPs from environmental water samples.

Preparation and characteristics of a novel PETN/TKX-50 co-crystal by a solvent/non-solvent method.

In order to decrease the sensitivity and broaden the application of pentaerythritol tetranitrate (PETN), a novel energetic co-crystal composed of PETN and dihydroxylammonium 5,5'-bistetrazole-1,1'-diolate (TKX-50) with high energy and low sensitivity was successfully prepared through the solvent/non-solvent method. The morphology and structure of the as-prepared co-crystal were characterized by scanning electron microscopy (SEM), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectrometry (XPS), fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy and high performance liquid chromatography (HPLC). The thermal decomposition properties were also analyzed by simultaneous thermogravimetry and differential scanning calorimetry (TG-DSC). The safety performance was judged by mechanical sensitivity tests. The SEM results revealed that the prepared new material was homogeneous with a mean granularity of 1 µm and the morphology was distinct from raw PETN and TKX-50. The XRD analysis indicated that a new crystalline formation appeared in the co-crystal which was quite different from the raw materials and their mixture. The XPS analysis showed peak shifts of C, N, O elements in the co-crystal. The FTIR spectra and Raman spectra suggested that hydrogen bond interactions existed between PETN and TKX-50 molecules. The molar ratio of PETN and TKX-50 was 1 : 1 determined by HPLC. There were two thermal decomposition peaks (194.1 °C and 261.3 °C) for the co-crystal at 20 °C min-1, while the raw materials and mixture had only one. Besides, the activation energy of the co-crystal increased compared to the raw materials, indicating better thermal stability of the co-crystal. The impact sensitivity and friction sensitivity of the PETN/TKX-50 co-crystal were reduced compared to raw PETN, and were even better than for 1,3,5-trimethylene trinitramine (RDX). The results showed a prospective application of the prepared PETN/TKX-50 co-crystal in the future.

[Human umbilical cord blood hematopoietic stem/progenitor cells can grow up in the mouse liver].

The biological characterization, differentiation and regeneration of hepatic stem/progenitor cells are the one of very active and interested fields. In this report, intravenous injection of human umbilical cord blood (HUCB) cells into the BALB/c-nu and SCID mice, an animal model for transplantation and liver injury, was reported. Using of flow cytometry and tissue typing (HLA), it was found that the HUCB cells were survived in mouse liver for 9 weeks. After separation from perfused liver, HUCB cells were detected by hematopoietic colonies (CFU-GEM M) in hepatocyte culture. It was concluded that the transplanted HUCB hematopoietic stem/progenitor cells can be survived in the liver over a long period of time.