Vanadium-Containing Keggin-Type Polyoxometalates, [VM12O40]3- and [VVM11O40]4- (M = Mo, W): Structural Characterization and Voltammetric, NMR, and EPR Studies Related to Electrochemical Reduction at Framework and Central Vanadium Sites.

Vanadium is accommodated in both the framework (VoutV) and central positions (VinV) in the Keggin-type polyoxometalates (POMs) [VinVVoutVM11O40]4- (M = Mo, W; VinVVoutVM11) and in the central position in [VinVM12O40]3- (VinVM12). The structures of the VinVVoutVM11 class have been determined by X-ray crystallography and compared to those of VinVM12 reported previously. A major feature of interest with POMs is their capacity for very extensive reduction, particularly when protonation accompanies the electron transfer step. With VinVVoutVM11 and VinVM12 POMs, knowledge as to whether reduction occurs at V or M sites and the concomitant dependence on acidity has been obtained. Frozen solution EPR spectra obtained following bulk electrolysis showed that the one-electron reduction of VinVMo12 occurs at the molybdenum framework site to give VinVMoVMo11. In contrast, EPR spectra of one-electron reduced VinVW12 at <30 K are consistent with the electron being accommodated on the central V atom in a tetrahedral environment to give VinIVW12. In the case of VinVVoutVM11, the initial reduction occurs at the framework VoutV site to give VinVVoutIVM11. The second electron is delocalized over the Mo framework in two-electron reduced VinVVoutIVMoVMo10, whereas it is accommodated on the central V site in VinIVVoutIVW11. The distance between VinIV and VoutIV in VinIVVoutIVW11 estimated as 3.5 ± 0.2 Å from analysis of the EPR spectrum is consistent with that obtained in VinVVoutVW11 from crystallographic data. Simulations of the cyclic voltammograms as a function of CF3SO3H acid concentration for the initial reduction processes provide excellent agreement with experimental data obtained in acetonitrile (0.10 M [n-Bu4N][PF6]) and allowed acid association constants to be estimated and compared with the literature values available for [XVoutVM11O40]n- (X = S (n = 3), P and As (n= 4); M = Mo, W). The interpretation of the voltammetric data is supported by 51V NMR measurements on the oxidized VV forms of the POMs.

Selective Electrochemical Hydrogenation of Phenol with Earth-abundant Ni-MoO2 Heterostructured Catalysts: Effect of Oxygen Vacancy on Product Selectivity.

Herein, we report highly efficient carbon supported Ni-MoO2 heterostructured catalysts for the electrochemical hydrogenation (ECH) of phenol in 0.10 M aqueous sulfuric acid (pH 0.7) at 60 °C. Highest yields for cyclohexanol and cyclohexanone of 95 % and 86 % with faradaic efficiencies of ∼50 % are obtained with catalysts bearing high and low densities of oxygen vacancy (Ov ) sites, respectively. In situ diffuse reflectance infrared spectroscopy and density functional theory calculations reveal that the enhanced phenol adsorption strength is responsible for the superior catalytic efficiency. Furthermore, 1-cyclohexene-1-ol is an important intermediate. Its hydrogenation route and hence the final product are affected by the Ov density. This work opens a promising avenue to the rational design of advanced electrocatalysts for the upgrading of phenolic compounds.

Advanced Spatiotemporal Voltammetric Techniques for Kinetic Analysis and Active Site Determination in the Electrochemical Reduction of CO2.

ConspectusElectrochemical reduction of the greenhouse gas CO2 offers prospects for the sustainable generation of fuels and industrially useful chemicals when powered by renewable electricity. However, this electrochemical process requires the use of highly stable, selective, and active catalysts. The development of such catalysts should be based on a detailed kinetic and mechanistic understanding of the electrochemical CO2 reduction reaction (eCO2RR), ideally through the resolution of active catalytic sites in both time (i.e., temporally) and space (i.e., spatially). In this Account, we highlight two advanced spatiotemporal voltammetric techniques for electrocatalytic studies and describe the considerable insights they provide on the eCO2RR. First, Fourier transformed large-amplitude alternating current voltammetry (FT ac voltammetry), as applied by the Monash Electrochemistry Group, enables the resolution of rapid underlying electron-transfer processes in complex reactions, free from competing processes, such as the background double-layer charging current, slow catalytic reactions, and solvent/electrolyte electrolysis, which often mask conventional voltammetric measurements of the eCO2RR. Crucially, FT ac voltammetry allows details of the catalytically active sites or the rate-determining step to be revealed under catalytic turnover conditions. This is well illustrated in investigations of the eCO2RR catalyzed by Bi where formate is the main product. Second, developments in scanning electrochemical cell microscopy (SECCM) by the Warwick Electrochemistry and Interfaces Group provide powerful methods for obtaining high-resolution activity maps and potentiodynamic movies of the heterogeneous surface of a catalyst. For example, by coupling SECCM data with colocated microscopy from electron backscatter diffraction (EBSD) or atomic force microscopy, it is possible to develop compelling correlations of (precatalyst) structure-activity at the nanoscale level. This correlative electrochemical multimicroscopy strategy allows the catalytically more active region of a catalyst, such as the edge plane of two-dimensional materials and the grain boundaries between facets in a polycrystalline metal, to be highlighted. The attributes of SECCM-EBSD are well-illustrated by detailed studies of the eCO2RR on polycrystalline gold, where carbon monoxide is the main product. Comparing SECCM maps and movies with EBSD images of the same region reveals unambiguously that the eCO2RR is enhanced at surface-terminating dislocations, which accumulate at grain boundaries and slip bands. Both FT ac voltammetry and SECCM techniques greatly enhance our understanding of the eCO2RR, significantly boosting the electrochemical toolbox and the information available for the development and testing of theoretical models and rational catalyst design. In the future, it may be possible to further enhance insights provided by both techniques through their integration with in situ and in operando spectroscopy and microscopy methods.

Recent advances and future perspectives for automated parameterisation, Bayesian inference and machine learning in voltammetry.

Advanced data analysis tools such as mathematical optimisation, Bayesian inference and machine learning have the capability to revolutionise the field of quantitative voltammetry. Nowadays such approaches can be implemented routinely with widely available, user-friendly modern computing languages, algorithms and high speed computing to provide accurate and robust methods for quantitative comparison of experimental data with extensive simulated data sets derived from models proposed to describe complex electrochemical reactions. While the methodology is generic to all forms of dynamic electrochemistry, including the widely used direct current cyclic voltammetry, this review highlights advances achievable in the parameterisation of large amplitude alternating current voltammetry. One significant advantage this technique offers in terms of data analysis is that Fourier transformation provides access to the higher order harmonics that are almost devoid of background current. Perspectives on the technical advances needed to develop intelligent data analysis strategies and make them generally available to users of voltammetry are provided.

Impact of the Lithium Cation on the Voltammetry and Spectroscopy of [XVM11O40]n- (X = P, As (n = 4), S (n = 3); M = Mo, W): Influence of Charge and Addenda and Hetero Atoms.

Polyoxometalates (POMs) have been proposed as electromaterials for lithium-based batteries because they provide access to multiple electron transfer reactions coupled to fast lithium ion transport processes and high stability over many redox cycles. Consequently, knowledge of reversible potentials and Li+ cation-POM anion interactions provides a strategic basis for their further development. In this study, detailed cyclic voltammetric studies of a series of [XVVM11O40]n- (XVM11n-) POMs (where X (heteroatom) = P (n = 4), As (n = 4), and S (n = 3) and M (addenda atom) = Mo, W) have been undertaken in CH3CN in the presence of LiClO4, with n-Bu4NPF6 also present when required to keep the ionic strength close to constant value of 0.1 M. An analysis of the data has allowed the impact of the POM charge, and addenda and hetero atoms on the reversible potentials and the interaction between Li+ and the oxidized XVVM11n- and reduced XVIVM11(n+1)- forms of the VV/IV redox couple to be determined. The SVV/IVM113-/4- process is independent of the Li+ concentration, implying the absence of the association of this cation with either SVVM113- or SVIVM114- redox levels. However, lithium-ion association constants for both VV and VIV redox levels were obtained from a comparison of simulated and experimental cyclic voltammograms for the reduction of the more negatively charged XVVM114- (X = P, As; M = Mo, W), since the Li+ interaction with these more negatively charged POMs is much stronger. The interaction between Li+ and the oxidized, XVVM11n-, and reduced, XVIVM11(n+1)-, forms was also investigated by 51V NMR and EPR spectroscopy, respectively, and it was confirmed that, due to their lower charge density, SVVM113- and SVIVM114- interact significantly less strongly with the lithium ion than XVVM114- and XVIVM115- (X = P, As). The lithium-POM association constants are substantially smaller than the corresponding proton association constants reported previously, which is attributed to a smaller surface charge density. The much stronger impact of Li+ on the WVI/V- and MoVI/V-based reductions that occur at more negative potentials than the VV/IV process also has been qualitatively evaluated.

Two-Dimensional Electrocatalysts for Efficient Reduction of Carbon Dioxide.

Two-dimensional (2D) materials are attractive catalysts for the electrochemical reduction of carbon dioxide reaction (eCO2 RR) by virtue of their tunable atomic structures, abundant active sites, enhanced conductivity, suitable binding affinity to carbon dioxide and/or reaction intermediates, and intrinsic scalability. Herein, recent advances in 2D catalysts for the eCO2 RR are reviewed. Structural features and properties of 2D materials that contribute to their advanced electrocatalytic properties are summarized, and strategies for enhancing their activity and selectivity for the eCO2 RR are reviewed. Prospects and challenges of applications of 2D catalysts for the eCO2 RR on an industrial scale are highlighted.

Unprecedented Formation of a Binuclear Au(II)-Au(II) Complex through Redox State Cycling: Electrochemical Interconversion of Au(I)-Au(I), Au(II)-Au(II), and Au(I)-Au(III) in Binuclear Complexes Containing the Carbanionic Ligand C6F4PPh2.

The rational design of binuclear Au(I)-Au(I), Au(II)-Au(II), and Au(I)-Au(III) complexes requires an understanding of how the redox states interconvert. Herein, the electrochemical interconversion of the three oxidation states I, II, and III is reported on the voltammetric (cyclic and rotating disk electrode) time scales for binuclear gold complexes containing C6F4PPh2 as a ligand, to demonstrate for the first time formation of a binuclear Au(II)-Au(II) from a Au(I)-Au(III) complex. Results are supported by bulk electrolysis and coulometry with reaction products being identified by 31P NMR and UV-vis spectroscopy. All electrochemical processes involve an overall two-electron charge-transfer process with no one-electron intermediate being detected. Importantly, the kinetically rather than thermodynamically favored isomer [Au2IIX2(µ-2-C6F4PPh2)2] is formed on redox cycling of [XAuI(µ-2-C6F4PPh2)(κ2-2-C6F4PPh2)AuIIIX] (X = Cl, ONO2). Finally, a mechanism is proposed to explain the simultaneous change of coordination of the chelating carbanionic ligand to bridging mode and interconversion of oxidation states in binuclear gold complexes.

Electrohydrogenation of Carbon Dioxide using a Ternary Pd/Cu2 O-Cu Catalyst.

A simple one-pot method has been developed to synthesize a palladium/cuprous oxide-copper (Pd/Cu2 O-Cu) material with a well-defined structure, by modification of Cu2 O-Cu with Pd through a galvanic replacement reaction. Compared with the well-known copper/cuprous oxide (Cu/Cu2 O) catalysts, the Pd/Cu2 O-Cu material can catalyze the electroreduction of CO2 into C1 products with much higher faradaic efficiencies at lower overpotentials in a CO2 -saturated 0.5 m NaHCO3 solution. In particular, the highest faradaic efficiencies of 92 % for formate and 30 % for methane were achieved at -0.25 and -0.65 V (vs. the reversible hydrogen electrode), respectively. The improvement is suggested to be the result of a synergistic effect between PdH and the catalytically active copper sites during electrochemical CO2 reduction.

Polysaccharide of Atractylodes macrocephala Koidz Enhances Cytokine Secretion by Stimulating the TLR4-MyD88-NF-κB Signaling Pathway in the Mouse Spleen.

Polysaccharide of Atractylodes macrocephala Koidz (PAMK) has been reported to have beneficial effects on regulation of immune responses in mammals and poultry. Nonetheless, the immunoregulatory mechanism of action of PAMK remains unclear. The Toll-like receptor 4 (TLR4) signaling cascade has been proved as a classic polysaccharide-regulated pathway. The aim of this study was to explore the effects of PAMK on the TLR4 signaling pathway in the regulation of spleen function in mice. Ninety-six 5-week-old BALB/c female mice were randomly allocated into four groups with three replicates per group and eight mice per replicate in a single-factor completely randomized experimental design. The control group was fed a basic diet (PAMK free); the other three groups were fed 100, 200, or 400 mg/kg PAMK for 28 days. The spleen index, concentrations of cytokines, and mRNA and protein expression levels of genes related to TLR4 signaling were determined in spleen tissue. Compared with the control group, the spleen index significantly increased in all treatment groups. Concentrations of interleukin 2 (IL-2), IL-4, interferon γ (IFN-γ), and tumor necrosis factor α (TNF-α) in the medium-PAMK group also increased significantly. PAMK in the medium-PAMK group significantly increased both mRNA and protein expression of TLR4, myeloid differentiation factor 88 (MyD88), TNFR-associated factor 6 (TRAF6), TRAF3, and nuclear factor kappa B (NF-κB) in the spleen. In conclusion, PAMK may increase immune-response capacity of the spleen in mice via TLR4-MyD88-NF-κB signaling.

Phosphomolybdic Acid-Assisted Growth of Ultrathin Bismuth Nanosheets for Enhanced Electrocatalytic Reduction of CO2 to Formate.

Oxides containing two-dimensional metallic catalysts have shown enhanced catalytic activity, stability, and product selectivity. Porous three-dimensional structures maximize the accessibility of the active sites, thus enhancing the catalytic performance of the catalysts. By integrating these desirable features in a single catalyst, further improvement in catalytic activity and selectivity is expected. In this study, oxide-containing bismuth (Bi) nanosheets of about 4 nm thickness interconnected to form a porous three-dimensional structure were synthesized by electrodeposition in the presence of phosphomolybdic acid under hydrogen evolution conditions. These Bi nanosheets catalyze CO2 reduction in a CO2 -saturated 0.5 m NaHCO3 solution to formate with a faradaic efficiency of 93±2 % at -0.86 V vs. RHE with a formate partial current density as high as 30 mA cm-2 . The Tafel slope of about 78 mV dec-1 suggests that the protonation of the adsorbed CO2 .- is the rate-limiting step.

Polyoxometalate-Promoted Electrocatalytic CO2 Reduction at Nanostructured Silver in Dimethylformamide.

Electrochemical reduction of CO2 is a promising method to convert CO2 into fuels or useful chemicals, such as carbon monoxide (CO), hydrocarbons, and alcohols. In this study, nanostructured Ag was obtained by electrodeposition of Ag in the presence of a Keggin type polyoxometalate, [PMo12O40]3- (PMo). Metallic Ag is formed upon reduction of Ag+. Adsorption of PMo on the surface of the newly formed Ag lowers its surface energy thus stabilizes the nanostructure. The electrocatalytic performance of this Ag-PMo nanocomposite for CO2 reduction was evaluated in a CO2 saturated dimethylformamide medium containing 0.1 M [ n-Bu4N]PF6 and 0.5% (v/v) added H2O. The results show that this Ag-PMo nanocomposite can catalyze the reduction of CO2 to CO with an onset potential of -1.70 V versus Fc0/+, which is only 0.29 V more negative than the estimated reversible potential (-1.41 V) for this process and 0.70 V more positive than that on bulk Ag metal. High faradaic efficiencies of about 90% were obtained over a wide range of applied potentials. A Tafel slope of 60 mV dec-1 suggests that rapid formation of *CO2•- is followed by the rate-determining protonation step. This is consistent with the voltammetric data which suggest that the reduced PMo interacts strongly with CO2 (and presumably CO2•-) and hence promotes the formation of CO2•-.

Voltammetric and Spectroscopic Studies of α- and ß-[PW12O40]3- Polyoxometalates in Neutral and Acidic Media: Structural Characterization as Their [(n-Bu4N)3][PW12O40] Salts.

The structure of the Keggin-type ß-[PW12O40]3- (PW12) polyoxometalate, with n-Bu4N+ as the countercation, has been determined for the first time by single-crystal X-ray analysis and compared to data obtained from a new determination of the structure of the α-PW12 isomer, having the same countercation. Analysis of cyclic voltammograms obtained in CH3CN (0.1 M [n-Bu4N][PF6]) reveals that the reversible potential for the ß-PW12 isomer always remains ca. 100 mV more positive than that of the α-PW12 isomer on addition of the acid CF3SO3H. Simulations of the cyclic voltammetry as a function of acid concentration over the range 0-5 mM mimic experimental data exceptionally well. These simulation-experiment comparisons provide access to reversible potentials and acidity constants associated with α and ß fully oxidized and one- and two-electron reduced systems and also explain how the two well-resolved one-electron W(VI)/W(V) processes converge into a single two-electron process if sufficient acid is present. 183W NMR spectra of the oxidized forms of the PW12 isomers are acid dependent and in the case of ß-PW12 imply that the bridging oxygens between the WI and WII units are preferentially protonated in acidic media. EPR data on frozen solutions of one-electron reduced ß-[PWVWVI11O40]4- indicate that either the WI or the WIII unit in ß-PW12 is reduced in the ß-[PWVI12O40]3-/ß-[PWVWVI11O40]4- process. In the absence of acid, reversible potentials obtained from the α- and ß-isomers of PW12 and [SiW12O40]4- exhibit a linear relationship with solvent properties such as Lewis acidity, acceptor number, and polarity index.

PdCu@Pd Nanocube with Pt-like Activity for Hydrogen Evolution Reaction.

The electronic properties of metal surfaces can be modulated to weaken the binding energy of adsorbed H-intermediates on the catalyst surface, thus enhancing catalytic activity for the hydrogen evolution reaction (HER). Here we first prepare PdCu alloy nanocubes (NCs) by coreduction of Cu(acac)2 (acac = acetylacetonate) and Na2PdCl4 in the presence of oleylamine (OAm) and trioctylphosphine (TOP). The PdCu NC coated glassy carbon electrode is then anodized at a constant potential of 0.51 V vs Ag/AgCl at room temperature in 0.5 M H2SO4 solution for 10 s, which converts PdCu NCs into core@shell PdCu@Pd NCs that show much enhanced Pt-like activity for the HER and much more robust durability. The improvements in surface property and HER activity are rationalized based on strain and ligand effects that enhance the activity of the edge-exposed Pd atoms on core@shell PdCu@Pd structure. This work opens up a new perspective for simultaneously reducing metal Pd cost and achieving excellent performance toward the HER.

Mixed-Metal Hybrid Polyoxometalates with Amino Acid Ligands: Electronic Versatility and Solution Properties.

Eight new members of a family of mixed-metal (Mo,W) polyoxometalates (POMs) with amino acid ligands have been synthesized and investigated in the solid state and solution using multiple physical techniques. While the peripheral POM structural framework is conserved, the different analogues vary in nuclearity of the central metal-oxo core, overall redox state, metal composition, and identity of the zwitterionic α-amino acid ligands. Structural investigations reveal site-selective substitution of Mo for W, with a strong preference for Mo to occupy the central metal-oxo core. This core structural unit is a closed tetrametallic loop in the blue reduced species and an open trimetallic loop in the colorless oxidized analogues. Density functional theory calculations suggest the core as the favored site of reduction and reveal that the corresponding molecular orbital is much lower in energy for a tetra- versus trimetallic core. The reduced species are diamagnetic, each with a pair of strongly antiferromagnetically coupled MoV centers in the tetrametallic core, while in the oxidized complexes all Mo is hexavalent. Solution small-angle X-ray scattering and circular dichroism (CD) studies indicate that the hybrid POM is stable in aqueous solution on a time scale of days within defined concentration and pH ranges, with the stability enhanced by the presence of excess amino acid. The CD experiments also reveal that the amino acid ligands readily exchange with other α-amino acids, and it is possible to isolate the products of amino acid exchange, confirming retention of the POM framework. Cyclic voltammograms of the reduced species exhibit an irreversible oxidation process at relatively low potential, but an equivalent reductive process is not evident for the oxidized analogues. Despite their overall structural similarity, the oxidized and 2e-reduced hybrid POMs are not interconvertible because of the respective open- versus closed-loop arrangement in the central metal-oxo cores.

Electrochemical Reduction of CO2 at Metal Electrodes in a Distillable Ionic Liquid.

The electroreduction of CO2 in the distillable ionic liquid dimethylammonium dimethylcarbamate (dimcarb) has been investigated with 17 metal electrodes. Analysis of the electrolysis products reveals that aluminum, bismuth, lead, copper, nickel, palladium, platinum, iron, molybdenum, titanium and zirconium electroreduce the available protons in dimcarb to hydrogen rather than reducing CO2 . Conversely, indium, tin, zinc, silver and gold are able to catalyze the reduction of CO2 to predominantly carbon monoxide (CO) and to a lesser extent, formate ([HCOO](-) ). In all cases, the applied potential was found to have a minimal influence on the distribution of the reduction products. Overall, indium was found to be the best electrocatalyst for CO2 reduction in dimcarb, with faradaic efficiencies of approximately 45 % and 40 % for the generation of CO and [HCOO](-) , respectively, at a potential of -1.34 V versus Cc(+/0) (Cc(+) =cobaltocenium) employing a dimethylamine to CO2 ratio of less than 1.8:1.

Electrooxidation of Ethanol and Methanol Using the Molecular Catalyst [{Ru4O4(OH)2(H2O)4}(γ-SiW10O36)2](10.).

Highly efficient electrocatalytic oxidation of ethanol and methanol has been achieved using the ruthenium-containing polyoxometalate molecular catalyst, [{Ru4O4(OH)2(H2O)4}(γ-SiW10O36)2](10-) ([1(γ-SiW10O36)2](10-)). Voltammetric studies with dissolved and surface-confined forms of [1(γ-SiW10O36)2](10-) suggest that the oxidized forms of 1 can act as active catalysts for alcohol oxidation in both aqueous (over a wide pH range covering acidic, neutral, and alkaline) and alcohol media. Under these conditions, the initial form of 1 also exhibits considerable reactivity, especially in neutral solution containing 1.0 M NaNO3. To identify the oxidation products, preparative scale bulk electrolysis experiments were undertaken. The products detected by NMR, gas chromatography (GC), and GC-mass spectrometry from oxidation of ethanol are 1,1-diethoxyethane and ethyl acetate formed from condensation of acetaldehyde or acetic acid with excess ethanol. Similarly, the oxidation of methanol generates formaldehyde and formic acid which then condense with methanol to form dimethoxymethane and methyl formate, respectively. These results demonstrate that electrocatalytic oxidation of ethanol and methanol occurs via two- and four-electron oxidation processes to yield aldehydes and acids. The total faradaic efficiencies of electrocatalytic oxidation of both alcohols exceed 94%. The numbers of aldehyde and acid products per catalyst were also calculated and compared with the literature reported values. The results suggest that 1 is one of the most active molecular electrocatalysts for methanol and ethanol oxidation.

Bioinspired Electrocatalytic CO2 Reduction by Bovine Serum Albumin-Capped Silver Nanoclusters Mediated by [α-SiW12O40 ](4-).

Silver nanoclusters capped with bovine serum albumin (AgNC@BSA) were synthesized and applied for the electrocatalytic reduction of CO2 . Inspired by the fact that many enzymes function only in the presence of coenzymes/cofactors that transfer electrons/protons or other groups, an electron transfer mediator was introduced to facilitate the electrical communication between the electrode and the strongly protected catalyst. The AgNC@BSA catalyst mediated by [α-SiW12 O40](4-) anions showed high electrocatalytic activity for CO2 reduction, which was not observed with either component on its own, in dimethylformamide containing 1 % (v/v) water. CO was the major product with excellent faradaic efficiency (>75 %). The onset potential for this catalytic CO2 reduction process is about 400 mV more positive than that found at a bulk silver electrode. This mediator-enhanced catalysis concept provides a general approach to investigate the electrocatalytic activities of nanoclusters, which remain largely unexplored.

Changing the Action of Iron from Stoichiometric to Electrocatalytic in the Hydrogenation of Ketones in Aqueous Acidic Media.

Cyclohexanone, a model compound chosen to conveniently represent small oxygenates present in the aqueous phase of biomass hydrothermal upgrading streams, was hydrogenated in the presence of electrodeposited iron(0) using aqueous formic or sulfuric acid as a hydrogen donor. Under these conditions, zero-valent iron is consumed stoichiometrically and serves as both a formic acid decomposition site and a hydrogen transfer agent. However, the resulting iron(II) can be used to continuously regenerate iron(0) when a potential is applied to the glassy carbon working electrode. Controlled potential electrolysis experiments show a 17% conversion of cyclohexanone (over 1000 seconds) to cyclohexanol with >80% efficiency of iron deposition from an iron(II) sulfate solution containing formic or sulfuric acid. In the absence of electrodeposited iron, formation of cyclohexanol could not be detected.

Lindqvist Polyoxoniobate Ion-Assisted Electrodeposition of Cobalt and Nickel Water Oxidation Catalysts.

A method has been developed for the efficient electrodeposition of cobalt and nickel nanostructures with the assistance of the Lindqvist ion [Nb6O19](8-). Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy, inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled plasma optical emission spectrometry, and a range of electrochemical techniques have been used to characterize the morphology, composition, catalytic water oxidation activity and stability of the films in alkaline solution. SEM images show that films consisting of nanoparticles with diameters of ca. 30 to 40 nm are formed after 40-50 potential cycles of deposition. Nb and Co/Ni are detected in the films by EDX. ICP-MS results show an elemental ratio of 1:1 for Co:Nb and 1:3 for Ni:Nb, respectively. Raman spectra reveal the presence of both [Nb6O19](8-) and Co(OH)2/Ni(OH)2. The films exhibit excellent stability and efficiency for electrocatalytic water oxidation in alkaline solution. Turnover frequencies of 12.9 and 13.2 s(-1) were determined by rotating ring disk electrode voltammetry at an overpotential of 480 mV for Co and Ni films, respectively. Fourier transformed large amplitude alternating current (FTAC) voltammetry reveals an additional underlying oxidation process for Co under catalytic turnover conditions, which indicates that a Co(IV) species is involved in the efficient catalytic water oxidation reactions. FTAC voltammetric data also suggest that the Ni films undergoes a clear phase transformation upon aging in aqueous 1 M NaOH and the electrogenerated higher oxidation state Ni from ß-NiOOH is the more active form of the catalyst.

Voltammetric behavior of 1- and 4-[S2V(V)W17O62]5⁻ in acidified acetonitrile.

Data derived from a voltammetric and spectroscopic study of the V(V/IV) couple associated with the initial reduction of the Wells-Dawson-type mono vanadium-substituted polyoxometalates, 1- and 4-[S2V(V)W17O62](5-) in CH3CN as a function of CF3SO3H acid concentration have been obtained. (51)V NMR (V(V) component) and EPR (V(IV) component) spectra were measured in CH3CN in the presence and absence of an acid. These data showed a small fraction of the 1-isomer in the 4-[S2V(V)W17O62](5-) sample and that protonation could occur at both redox levels for both isomers. On the basis of the mechanism postulated from the voltammetric and spectroscopic data, simulations of cyclic voltammograms were undertaken for the reduction of the isomerically pure 1-[S2V(V)W17O62](5-) isomer over a wide acid concentration range, and the results were compared with experimental data. Cyclic voltammograms of the V(V/IV) couple derived from the reduction of 1- and 4-[X2V(V)W17O62](7-) (X = P, As) were also obtained in CH3CN and the results were compared with those for 1- and 4-[S2V(V)W17O62](5-). Reversible potentials for the V(V/IV) couple are dependent on the anion charge of the polyoxometalate. Analysis of cyclic voltammograms obtained for 1- and 4-[S2V(V)W17O62](5-) in acetonitrile, acetone, dimethyl sulfoxide, dimethyl formamide and nitromethane showed that these V(V/IV) reversible potentials are also dependent on the acceptor numbers and the polarity index (E(T)(N)) values of the organic solvents.