MnO2 porous carbon composite from cellulose enabling high gravimetric/volumetric performance for supercapacitor.

Preparing electrode material integrated with high gravimetric/volumetric capacitance and fast electron/ion transfer is crucial for the practical application. Owing to the structural contradiction, it is a big challenge to construct electrode material with high packing density, sufficient ion transport channels, and fast electronic transfer pathways. Herein, MnO2 porous carbon composite with abundant porous structure and 3D carbon skeleton was facilely fabricated from Linum usitatissimum. L stems via NaOH activation and MnO2 introduction. The in-situ introduced MnO2 not only increases the packing density and the electrical conductivity of the porous carbon but also provides more active sites for oxidation reactions. These unique characteristics endow the resultant MnO2 porous carbon composite with remarkable gravimetric capacitance of 549 F g-1, volumetric capacitance of 378 F cm-3, and capacitance retention of 54.9 %. Giving the simple process and low cost, this work might offer a new approach for structural design and the practical application of high-performance electrode materials.

Effect of Nano-Silica and Sorbitol on the Properties of Chitosan-Based Composite Films.

Chitosan and its derivatives are widely used in food packaging, pharmaceutical, biotechnology, medical, textile, paper, agriculture, and environmental industries. However, the flexibility of chitosan films is extremely poor, which limits its relevant applications to a large extent. In this paper, chitosan/sorbitol/nano-silica (CS/sorbitol/SiO2) composite films were prepared by the casting film method using chitosan, sorbitol, Tween-80 and nano-SiO2 as raw materials. The structure of the films was characterized by infrared spectroscopy, electron scanning microscopy, and X-ray diffraction analysis. The effects of sorbitol and nano-silica dosage on the mechanical properties, thermal properties and water vapor barrier properties of the composite film were investigated. The results show that with the gradual increase in sorbitol (≤75 wt %), the elongation at the break of chitosan/sorbitol films significantly increased. When the addition of sorbitol was 75 wt %, the elongation at break of the chitosan/sorbitol composite film was 13 times higher than that of the chitosan film. Moreover, nano-SiO2 can further improve the mechanical properties and thermal stability of the chitosan/sorbitol composite films. When the amount of nano-silica was 4.5 wt %, the composite film became more flexible, with a maximum elongation of 90.8% (which is 14 times that of chitosan film), and its toughness increased to 10.52 MJm-3 (which is 6 times that of chitosan film). This study balances the tensile strength and elongation at break of the composite films by adding a plasticizer and nano-filler, providing a reference for the preparation of chitosan composites or their blending with other polymers, and has practical guiding significance for the industrial production of biomass plastics.

MOF-Derived Co/C and MXene co-Decorated Cellulose-Derived Hybrid Carbon Aerogel with a Multi-Interface Architecture toward Absorption-Dominated Ultra-Efficient Electromagnetic Interference Shielding.

Exploring electromagnetic interference (EMI) shielding materials with ultra-efficient EMI shielding effectiveness (SE) and an absorption-dominated mechanism is urgently required for fundamentally tackling EMI radiation pollution. Herein, zeolitic imidazolate framework-67 (ZIF-67)/MXene/cellulose aerogels were first prepared via a simple solution mixing-regeneration and freeze-drying process. Subsequently, they are converted into electric/magnetic hybrid carbon aerogels (Co/C/MXene/cellulose-derived carbon aerogels) through a facile pyrolysis strategy. ZIF-67-derived porous Co/C could provide the additional magnetic loss capacity. The resultant electric/magnetic hybrid carbon aerogels exhibit a hierarchically porous structure, complementary electromagnetic waves (EMWs) loss mechanisms, and abundant heterointerfaces. The construction of a porous architecture and the synergy of electric/magnetic loss could greatly alleviate the impedance mismatching at the air-specimen interface, which enables more EMWs to enter into the materials for consumption. Moreover, numerous heterointerfaces among Co/C, Ti3C2Tx MXene, and cellulose-derived carbon skeleton induce the generation of multiple polarization losses containing interfacial and dipole polarization, which further dissipate the EMWs. The resultant electric/magnetic hybrid carbon aerogel with a low density (85.6 mg/cm3) achieves an ultrahigh EMI SE of 86.7 dB and a superior absorption coefficient of 0.72 simultaneously. This work not only offers a novel approach to design high-performance EMI shielding materials entailing low reflection characteristic but also broadens the applicability of electric/magnetic hybrid carbon aerogels in aerospace, precision electronic devices, and military stealth instruments.

Multifunctional CoFe2O4@MXene-AgNWs/Cellulose Nanofiber Composite Films with Asymmetric Layered Architecture for High-Efficiency Electromagnetic Interference Shielding and Remarkable Thermal Management Capability.

Developing high-efficiency electromagnetic interference (EMI) shielding composite films with outstanding flexibility and excellent thermal management capability is vital but challenging for modern integrated electronic devices. Herein, a facile two-step vacuum filtration method was used to fabricate ultrathin, flexible, and multifunctional cellulose nanofiber (CNF)-based composite films with an asymmetric layered architecture. The asymmetric layered structure is composed of a low-conductivity CoFe2O4@MXene/CNF layer and a highly conductive silver nanowires (AgNWs)/CNF layer. Benefiting from the rational placement of the impedance matching layer and shielding layer, as well as the synergistic effect of electric and magnetic losses, the resultant composite film exhibits an extremely high EMI shielding effectiveness (SE) of 73.3 dB and an average EMI SE of 70.9 dB with low reflected efficiency of 4.9 dB at only 0.1 mm thickness. Sufficiently reliable EMI SE (over 95% reservation) is attained even after suffering from continuous physical deformations and long-term chemical attacks. Moreover, the prepared films exhibit extraordinary flexibility, strong mechanical properties, and satisfactory thermal management capability. This work offers a viable strategy for exploiting high performance EMI shielding films with attractive thermal management capacity, and the resultant films present extensive application potential in aerospace, artificial intelligence, advanced electronics, stealth technology, and the national defense industry, even under harsh environments.

Facile construction of core-shell Carbon@CoNiO2 derived from yeast for broadband and high-efficiency microwave absorption.

Manufacturing dielectric/magnetic composites with hierarchical structure is regard as a promising strategy for the progress of high-performance microwave absorption (MA) materials. In this paper, the nano-grass structured CoNiO2 magnetic shell was uniformly anchored on the yeast-derived carbon microspheres by in-situ one-pot synthesis method. Profiting from the unique nano-grass and core-shell structure, capable dielectric/magnetic loss, along with improved impedance matching, the prepared absorber realizes desirable MA performance. The minimum reflection loss (RLmin) reaches up to -44.06 dB at 6.56 GHz. Moreover, the effective absorption bandwidth (EAB, reflection loss (RL) < -10 dB) accomplishes 7.04 GHz under a low filler loading of 20 wt%. This work endeavors a valuable insight for designing innovative core-shell structured materials with high-efficiency MA and broad bandwidth.

Three-dimensional macroporous hybrid carbon aerogel with heterogeneous structure derived from MXene/cellulose aerogel for absorption-dominant electromagnetic interference shielding and excellent thermal insulation performance.

The development of electromagnetic interference (EMI) shielding materials with excellent absorption coefficient (A) is vital to completely eliminate the pollution of the ever-increasing electromagnetic waves (EMWs). In this regard, a TiC/carbon hybrid aerogel, derived from MXene/cellulose aerogel, was successfully fabricated via freeze-drying and subsequent pyrolysis process. Profiting from the open, loose three-dimensional (3D) macro pores with sheet-like morphology and high porosity, as well as the rich heterogeneous interfaces between TiC and cellulose-derived carbon, the as-prepared hybrid carbon aerogel achieves ultra-efficient EMI shielding effectiveness of 72.9 dB in conjunction with a superior A value of 0.76 and low thermal conductivity. These properties endow the as-prepared aerogel with strong absorption-dominant ultra-efficient EMI shielding and thermal insulation performance to meet the complex practical requirements. This work provides a promising strategy for achieving ultra-efficient multifunctional EMI shielding performance and superior A simultaneously.

Magnetic coupling N self-doped porous carbon derived from biomass with broad absorption bandwidth and high-efficiency microwave absorption.

Nowadays, developing microwave absorption materials (MAMs) with thin thickness, wide-frequency effective absorption bandwidth (EAB) and strong absorbing capacity is an urgent requirement to tackle the increasingly serious electromagnetic radiation issue. Herein, we report a novel high-performance MAMs by growing Fe3O4 nanoparticles on activated porous carbon derived from egg white via a facile carbonization and subsequent hydrothermal approach. The resultant composite features three-dimensional hierarchical porous carbon embedded with Fe3O4 nanoparticles. Benefiting from the balanced impedance matching and the multi-loss that involve the conductive loss, dielectric loss, dipolar/interfacial polarization loss and magnetic loss, the prepared composite achieves a minimum reflection loss (RL) of -43.7 dB at 9.92 GHz and a broad EAB (RL < -10 dB) of 7.52 GHz (6.24-13.76 GHz) at a thin thickness of 2.5 mm and a low filler content of 20 wt%. This work provides new insights for exploring novel magnetic coupling porous carbon derived from biomass with high-efficiency microwave absorption performance.

The BZR1-EDS1 module regulates plant growth-defense coordination.

Plants have developed sophisticated strategies to coordinate growth and immunity, but our understanding of the underlying mechanism remains limited. In this study, we identified a novel molecular module that regulates plant growth and defense in both compatible and incompatible infections. This module consisted of BZR1, a key transcription factor in brassinosteroid (BR) signaling, and EDS1, an essential positive regulator of plant innate immunity. We found that EDS1 interacts with BZR1 and suppresses its transcriptional activities. Consistently, upregulation of EDS1 function by a virulent Pseudomonas syringae strain or salicylic acid treatment inhibited BZR1-regulated expression of BR-responsive genes and BR-promoted growth. Furthermore, we showed that the cytoplasmic fraction of BZR1 positively regulates effector-triggered immunity (ETI) controlled by the TIR-NB-LRR protein RPS4, which is attenuated by BZR1's nuclear translocation. Mechanistically, cytoplasmic BZR1 facilitated AvrRps4-triggered dissociation of EDS1 and RPS4 by binding to EDS1, thus leading to efficient activation of RPS4-controlled ETI. Notably, transgenic expression of a mutant BZR1 that accumulates exclusively in the cytoplasm improved pathogen resistance without compromising plant growth. Collectively, these results shed new light on plant growth-defense coordination and reveal a previously unknown function for the cytoplasmic fraction of BZR1. The BZR1-EDS1 module may be harnessed for the simultaneous improvement of crop productivity and pathogen resistance.

Highly Bendable and Durable Waterproof Paper for Ultra-High Electromagnetic Interference Shielding.

An efficient electromagnetic interference (EMI) shielding paper with excellent water repellency and mechanical flexibility has been developed, by assembling silver nanowires (AgNWs) and hydrophobic inorganic ceramic on the cellulose paper, via a facile dip-coating preparation. Scanning electron microscope (SEM) observations confirmed that AgNWs were interconnected and densely coated on both sides of the cellulose fiber, which endows the as-prepared paper with high conductivity (33.69 S/cm in-plane direction) at a low AgNW area density of 0.13 mg/cm2. Owing to multiple reflections and scattering between the two outer highly conductive surfaces, the obtained composite presented a high EMI shielding effectiveness (EMI SE) of up to 46 dB against the X band, and ultrahigh specific EMI SE of 271.2 dB mm-1. Moreover, the prepared hydrophobic AgNW/cellulose (H-AgNW/cellulose) composite paper could also maintain high EMI SE and extraordinary waterproofness (water contact angle > 140°) by suffering dozens of bending tests or one thousand peeling tests. Overall, such a multifunctional paper might have practical applications in packaging conductive components and can be used as EMI shielding elements in advanced application areas, even under harsh conditions.

Layer-Structured Design and Fabrication of Cyanate Ester Nanocomposites for Excellent Electromagnetic Shielding with Absorption-Dominated Characteristic.

In this work, we propose novel layer-structured polymer composites (PCs) for manipulating the electromagnetic (EM) wave transport, which holds unique electromagnetic interference (EMI) shielding features. The as-prepared PCs with a multilayered structure exhibits significant improvement in overall EMI shielding effectiveness (EMI SE) by adjusting the contents and distribution of electrical and magnetic loss fillers. The layer-structured PCs with low nanofiller content (5 wt % graphene nanosheets (GNSs) and 15 wt % Fe3O4) and a thickness of only 2 mm exhibited ultrahigh electrical conductivity and excellent EMI SE, reaching up to 2000 S/m and 45.7 dB in the X-band, respectively. The increased EMI SE of the layer-structured PCs was mainly based on the improved absorption rather than the reflection of electromagnetic waves, which was attributed to the "absorb-reflect-reabsorb" process for the incident electromagnetic waves. This work may provide a simple and effective approach to achieve new EMI shielding materials, especially for absorption-dominated EMI shielding.

Genetic diversity and population structure of Rheum tanguticum (Dahuang) in China.

BACKGROUND: Wild Rheum tanguticum (Dahuang in Chinese) has becoming endangered in China. This study aims to examine the genetic structure and genetic diversity of R. tanguticum within species, and the genetic differentiation within and among populations in China. METHODS: The variability and structure of 19 populations of R. tanguticum were investigated by their chloroplast DNA matK sequences. The genetic diversity index was calculated by Dnasp, PERMUT, and Arlequin 3.0 software, and a neighbor-joining (NJ)-tree was constructed by MEGA 5.0 software. RESULTS: Fifteen haplotypes were obtained based on the matK sequence analysis. The mean genetic diversity within species was 0.894, and the genetic variability among populations (67.6%) was relatively higher than that within populations (13.88%) according to the AMOVA and PERMUT analyses. The NJ-tree and a pairwise difference analysis indicated geographical isolation of R. tanguticum. The gene flow among populations was 0.05, indicating a genetic drift among some populations, which was also confirmed by the NJ-tree and haplotype distributions. Furthermore, a mismatch distribution analysis revealed the molecular evolution of R. tanguticum. CONCLUSION: Genetic diversity among and within populations of R. tanguticum in China was demonstrated.

[Wild-tending techniques study on Glycyrrhiza uralensis--effect of irrigation and rhizome length on survival ratio, yield and quality].

This research aimed at studying the effects of irrigation and rhizome length on the survival of ratio, yield and quality of Glycyrrhiza uralensis in wild tending condition. Employed the split-block design to carry out the field experiment, sampled with the quadrat method to measured the relative growth indexes and to estimate the yield, used the HPLC (high performance liquid chromatog- raphy ) method to measure the glycyrrhizin in the rhizome and adventitious root of the G. uralensis in this study. The quantity of the adventitious roots and the survival ratio were increased significantly as the length of the rhizome increased (P < 0.01), but the length of the rhizome had no remarkable effect on the content of glycyrrhizin. The average content of the glycyrrhizin in the adventitious root and rhizome could reach 3.03% and 2.12% after 3-year wild tending, respectively, and this results indicated that the quality of the glycyrrhiza using this method was much better than that from cultured glycyrrhiza with the reproducing method of seeding. so using the rhizome as reproductive material to produce the glycyrrhiza under the wild tending condition could get the high quality glycyrrhiza quick- ly and steadily, this phenomenon could be explained by the Hypothesis of synthetic inertia of the medicinal components from the wild material of G. uralensis. But the maximum yield with this method was just more than 945 kg x hm(-2) in this study. So the further work of how to increase the yield in the practical application with the method found in this study need to be done in the next research.

[Activation of p21(WAF1/CIP1) by small activating RNA inhibits cell proliferation and induces apoptosis in BEL-7402 hepatoma cell].

OBJECTIVE: To evaluate the anti neoplastic effects of p21(WAF1/CIP1) transcriptional activation induced by duplex RNAs in hepatocellular carcinoma (HCC) cell line BEL-7402. METHODS: Cells were treated with dsRNAs complementary to promoter sequences of p21(WAF1/CIP1). Quantitative polymerase chain reaction (qPCR) and Western blot were employed to detect the expression of p21. At various timepoints post-transfection, cell viability assay and apoptosis analysis were used to determine the effect of RNA activation. After transfection Western blot was also performed to detect the expression of Bcl-xL, cleaved caspase-3, cleaved caspase-9 and cleaved PARP. RESULTS: DsP21-322 transfection significantly inhibited cell viability. And, at Day 5, dsP21-322 inhibited cell growth by 65.84% versus control. Flow cytometry revealed that dsP21-322 caused a significant increase of cell apoptosis. The total percent of apoptotic cells (UR+LR) increased to 36.86% versus 11.51% and 14.06% in mocks and controls respectively. Such phenomena correlated with a decrease of anti-apoptotic protein Bcl-xL and an increase of cleaved caspase-3, cleaved caspase-9 and cleaved PARP. CONCLUSION: Activation of p21 gene expression by saRNA may offer therapeutic benefits for HCC and other cancers.

[Acquisition and storage methods for image data collected in Chinese medicine resources survey].

The acquisition and storage of the image data are important in the Chinese medicine resources survey, and it is important data and evidence for the process and the results. The image data of the Chinese medicinal materials' habitat, original plant or animal, processing in habitat, commodity form, the relative contents and workshop scenarios in the investigation are important for the compiling of the Color Atlas of National Chinese Medicine Resources, mapping the digital scattergram of the Chinese medicine resources, establishing the digital Chinese medicine plant herbarium and acquiring the documentary of the Chinese medicine resource survey. The content, procedures and methods of the video data collecting have been related and analyzed in this article to provide reference for the Chinese medicine resources survey.

Distribution patterns of the contents of five active components in taproot and stolon of Glycyrrhiza uralensis.

Wild or cultivated Glycyrrhiza uralensis FISCHER (G. uralensis) are the main source of licorice, and they contain the similar compounds, such as the triterpenoid saponins and flavonoids, but above two kinds of the components contents are low level in the cultivated licorice. To produce the high quality cultivated licorices, researchers studied the affecting factors about the compounds producing in the plant of licorice, and then found that the growth years, genetic differences and water deficit are all the important factors. In this paper, we found that there were different distribution patterns of the main five active components (FAC) including glycyrrhizin, liquiritin, isoliquiritin, liquiritigenin and isoliquiritigenin in the taproot and stolon of G. uralensis and maybe they are also important influence factors to the FAC contents of the licorices. In wild G. uralensis, the contents of FAC tended to be lower in the younger parts of the stolon, and in the cultivated G. uralensis taproot, the contents of glycyrrhizin, liquiritin and isoliquiritin tended to increase from top to end, contrary to the contents of liquiritigenin and isoliquiritigenin, which increased first and then decreased. Our results will contribute to the analyses of factors which influence the quality of licorice, and provide some reference for cultivating high quality licorices for herbal medicine.

EGFR inhibitors sensitize non-small cell lung cancer cells to TRAIL-induced apoptosis.

Apoptosis induced by tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) can be regulated by the epidermal growth factor (EGF) signaling pathway. In this study, recombinant adenoviral vectors that encode TRAIL gene from the hTERT/RGD promoter (AdTRAIL) was combined with drugs including gefitinib, elotinib, and cetuximab that inhibit EGFR and the EGF signaling pathway in non-small cell lung cancer (NSCLC) cell lines to investigate their antitumor activity. In vitro, compared to single reagent, AdTRAIL combined with EGFR inhibitors reduced proliferation and enhanced apoptosis in H460, A549, and SW1573 cell lines. Western blot results suggested that these effects were relative to up-regulation of pro-apoptosis protein BAX and down-regulation of p-AKT. In vivo, AdTRAIL combined with cetuximab resulted in a significant growth reduction in H460 xenografts without damage to the main organs of nude mice. Histological examination and TUNEL analyses of xenografts showed that cetuximab enhanced cell apoptosis induced by AdTRAIL. These results indicate that EGFR inhibitors enhanced AdTRAIL anti-tumor activity in NSCLC cell lines and that inhibiting the AKT pathway played an important role in this enhancement.