Simultaneous electroanalytical determination of hydroquinone and catechol in the presence of resorcinol at an SiO2/C electrode spin-coated with a thin film of Nb2O5.

This paper describes the development, characterization and application of an Nb(2)O(5) film formed on the surface of a carbon ceramic material, SiO(2)/C, obtained by a sol-gel method, using the spin-coating technique. The working electrode using this material will be designated as SiCNb. Hydroquinone and catechol can be oxidized at this electrode in the presence of resorcinol, allowing their simultaneous detection. The electrochemical properties of the resulting electrode were investigated using cyclic and differential pulse voltammetry techniques. Well-defined and separated oxidation peaks were observed by differential pulse voltammetry in Tris-HCl buffer solution at pH 7 containing 1 mol L(-1) KCl in the supporting electrolyte solution. The SiCNb electrode exhibited high sensitivity in the simultaneous determination of hydroquinone and catechol in the presence of resorcinol, with the limits of detection for hydroquinone and catechol being 1.6 µmol L(-1) and 0.8 µmol L(-1), respectively. Theoretical calculations were performed to determine the ionization energies of hydroquinone, catechol and resorcinol; the results were used to explain the simultaneous determination of species by differential pulse voltammetry. The presence of resorcinol did not produce any interference in the simultaneous detection of hydroquinone and catechol on the surface of the modified electrode.

Highly-controlled grafting of mono and dicationic 4,4'-bipyridine derivatives on SBA-15 for potential application as adsorbent of CuCl2 from ethanol solution.

This work describes a highly controlled post-grafting of mono and dicationic 4,4'-bipyridine alkoxysilane derivatives (Bipy(+) and Bipy(2+)) onto the surface of an ordered mesoporous silica, SBA-15. The materials obtained are designated as SBA-15/Bipy(+)Cl(-) and SBA-15/Bipy(2+)Cl(2)(-), both possessing chloride as counter ion. The regular arrangement of uniform pores of this inorganic matrix is likely to ensure good accessibility to the active centers (electron acceptors) attached to the surface. The materials are excellent adsorbents due to the ability of the functional groups to retain copper chlorides on their surfaces as anionic complexes (CuCl(2+n)(n-)) in ethanol. From the adsorption, results it was possible to probe the functional surface monolayer of the materials, which present a highly homogenous distribution of functional groups inside the ordered SBA-15 channels, with an exchange efficiency of 93% for SBA-15/Bipy(+)Cl(-) and 94% for SBA-15/Bipy(2+)Cl(2)(-). Both adsorbent materials are potentially useful in the pre-concentration and further analysis of Cu(II) present in trace amounts in ethanol, extensively used as an automotive fuel in Brazil.

Ion-exchange properties of imidazolium-grafted SBA-15 toward AuCl4(-) anions and their conversion into supported gold nanoparticles.

Imidazolium groups were successfully prepared and grafted on the surface of SBA-15 mesoporous silica. The ion-exchange properties of the functionalized porous solid (SBA-15/R(+)Cl(-)) toward AuCl(4)(-) anions were evaluated through an ion-exchange isotherm. The calculated values of the equilibrium constant (log ß = 4.47) and the effective ion-exchange capacity (t(Q) = 0.79 mmol g(-1)) indicate that the AuCl(4)(-) species can be loaded and strongly retained on the functionalized surface as counterions of the imidazolium groups. Subsequently, solids containing different amounts of AuCl(4)(-) ions were submitted to a chemical reduction process with NaBH(4), converting the anionic gold species into supported gold nanoparticles. The plasmon resonance bands, the X-ray diffraction patterns, and transmission electron microscopy images of the supported gold nanoparticles before and after thermal treatment at 973 K indicate that the metal nanostructures are highly dispersed and stabilized by the host environment.

Ionic silica based hybrid material containing the pyridinium group used as an adsorbent for textile dye.

The present study reports the development of an ionic silica based hybrid material containing the cationic pyridinium group, which was employed for the removal of the Reactive Red 194 textile dye from aqueous solution. Three hybrid material samples were prepared with planned textural and chemical properties, varying the inorganic precursor molar percentage in the sol-gel synthesis. The obtained samples were defined as Py/Si-90, Py/Si-92 and Py/Si-94, where the number specifies the inorganic molar percentage. The hybrid samples were characterized by elemental, infrared, (13)C and (29)Si NMR, N(2) adsorption-desorption isotherms and thermogravimetric analyses. The dye-removing ability of these adsorbents was determined by the batch contact adsorption procedure. Effects such as pH value and adsorbent dosage on the adsorption capacities were studied. Four kinetic models were applied. The adsorption was best fitted to Avrami fractional-order kinetic model for the three hybrid material samples. The kinetic data were also adjusted to an intra-particle diffusion model resulting three linear regions, indicating that the adsorption kinetics follows multiple sorption rates. The equilibrium data were fitted to Langmuir, Freundlich and Liu isotherm models. The maximum adsorption capacities were 165.4, 190.3 and 195.9 mg g(-1) for Py/Si-90, Py/Si-92 and Py/Si-94, respectively. Simulated dye-house effluents were used to check the applicability of the proposed adsorbents for effluent treatment. Dye loaded adsorbents were regenerated (>98.2%) by using 0.4 mol L(-1) of NaOH solution as an eluent.

Electrooxidation of nitrite on a silica-cerium mixed oxide carbon paste electrode.

A silica-cerium mixed oxide (SiCe) was prepared by the sol-gel process, using tetraethylorthosilicate and cerium nitrate as precursors and obtained as an amorphous solid possessing a specific surface area of 459 m(2) g(-1). Infrared spectroscopy of the SiCe material showed the formation of the Si-O-Ce linkage in the mixed oxide. Scanning electron microscopy/energy dispersive spectroscopy indicated that the cerium oxide particles were homogenously dispersed on the matrix surface. X-ray diffraction and (29)Si solid-state nuclear magnetic resonance implied non-crystalline silica matrices with chemical environments that are typical for silica-based mixed oxides. X-ray photoelectron spectroscopy showed that Ce was present in approximately equal amounts of both the 3+ and 4+ oxidation states. Cyclic voltammetry data of electrode prepared from the silica-cerium mixed oxide showed a peak for oxidation of Ce(3+)/Ce(4+) at 0.76 V and electrochemical impedance spectroscopy equivalent circuit indicated a porous structure with low charge transfer resistance. In the presence of nitrite, the SiCe electrode shows an anodic oxidation peak at 0.76 V with a linear response as the concentration of the analyte increases from 3×10(-5) at 3.9×10(-3) mol L(-1).

Silsesquioxane as a new building block material for modified electrodes fabrication and application as neurotransmitters sensors.

Nanostructured films comprising a 3-n-propylpyridinium silsesquioxane polymer (designated as SiPy+Cl-) and copper (II) tetrasulfophthalocyanine (CuTsPc) were produced using the Layer-by-Layer technique (LbL). To our knowledge this is the first report on the use of silsesquioxane derivative polymers as building blocks for nanostructured thin films fabrication. Deposition of the multilayers were monitored by UV-Vis spectroscopy revealing the linear increment in the absorbance of the Q-band from CuTsPc at 617 nm with the number of SiPy+Cl-/CuTsPc or CuTsPc/SiPy+Cl-bilayers. FTIR analyses showed that specific interactions between SiPy+Cl- and CuTsPc occurred between SO3- groups of tetrasulfophthalocyanine and the pyridinium groups of the polycation. Morphological studies were carried out using the AFM technique, which showed that the roughness and thickness of the films increase with the number of bilayers. The films displayed electroactivity and were employed to detection of dopamine (DA) and ascorbic acid (AA) using cyclic voltammetry, at concentrations ranging from 1.96 x 10(-4) to 1.31 x 10(-3) molL(-1). The number and the sequence of bilayers deposition influenced the electrochemical response in presence of DA and AA. Using differential pulse technique, films comprising SiPy+/-/CuTsPc were able to distinguish between DA and ascorbic acid (AA), with a potential difference of approximately with 500 mV, in the concentration range of 9.0 x 10(-5) to 2.0 x 10(-4) molL(-1), in pH 3.0.

Application of manganese (II) phthalocyanine synthesized in situ in the SiO2/SnO2 mixed oxide matrix for determination of dissolved oxygen by electrochemical techniques.

This work describes the in situ immobilization of Mn(II) phthalocyanine (MnPc) in a porous SiO(2)/SnO(2) mixed oxide matrix obtained by the sol gel processing method. The chemically modified matrix SiO(2)/SnO(2)/MnPc, possessing an estimated amount of 8 × 10(-10) mol cm(-2) of MnPc on the surface, was used to prepare an electrode to analyze dissolved oxygen in water by an electrochemical technique. The electrode was prepared by mixing the material with ultrapure graphite and evaluated using differential pulse voltammetry. Dissolved O(2) was reduced at -0.31 V with a limit of detection (LOD) equal to 7.0 × 10(-4) mmol L(-1). A mechanism involving four electrons in O(2) reduction was determined by the rotating disk electrode technique.

Surface functionalization of SBA-15 and a nonordered mesoporous silica with a 1,4-diazabicyclo[2.2.2]octane derivative: study of CuCl2 adsorption from ethanol solution.

This work describes the preparation and characterization of postfunctionalized ordered (SBA-15) and nonordered (SMD) mesoporous silicas with n-propyl-1,4-diazoniabicycle[2.2.2]octane chloride (DbCl) moiety. The main interest is based on the fact that these materials are excellent adsorbents due to the ability of functional groups to retain copper chlorides on their surfaces as anionic complexes CuCl(2+n)(n-). The specific surface areas (S(BET)) and average pore diameters (d(pore)) for SBA-15 and SMD are SBA-15, S(BET)=944 m(2) g(-1), d(pore)=9.0 nm; SMD, S(BET)=710 m(2) g(-1), d(pore)=11 nm. On functionalization with DbCl, reductions in the specific surface areas of the resulting materials (SBA-15/DbCl and SMD/DbCl) are observed and the following functionalization degrees (ϕ) were determined: SBA-15/DbCl, S(BET)=247 m(2) g(-1), ϕ=0.95 mmol g(-1); SMD/DbCl, S(BET)=83 m(2) g(-1), ϕ=1.2 mmol g(-1). The adsorption equilibria of CuCl(2) in ethanol were characterized, and the heterogeneous stability constants, ß(1) and ß(2), corresponding to formation of CuCl(4)(2-) and CuCl(3)(-) anionic species adsorbed on the surface were found. Also, the effective sorption capacities (t(Q)) were determined: SBA-15/DbCl, log ß(1)=4.46, log ß(2)=7.10, t(Q)=0.80 mmol g(-1); SMD/DbCl, log ß(1)=4.95, log ß(2)=7.52, t(Q)=0.75 mmol g(-1). Regeneration of the adsorbents requires a very simple procedure consisting of their immersion in aqueous solution followed by immediate release to the solution phase of the Cu(OH(2))(n)(2+) species, followed by chloride anions as the counterions.

SiO2/SnO2/Sb2O5 microporous ceramic material for immobilization of Meldola's blue: application as an electrochemical sensor for NADH.

The mixed oxide SiO(2)/SnO(2), containing 25 wt% of SnO(2), determined by X-ray fluorescence, was prepared by the sol-gel method and the porous matrix obtained was then grafted with Sb (V), resulting the solid designated as (SiSnSb). XPS indicated 0.7% of Sb atoms on the surface. Sb grafted on the surface contains Brønsted acid centers (SbOH groups) that can immobilize Meldola's blue (MB(+)) cationic dye onto the surface by an ion exchange reaction, resulting the solid designated as (SiSnSb/MB). In the present case a surface concentration of MB(+)=2.5×10(-11) mol cm(2) on the surface was obtained. A homogeneous mixture of the SiSnSb/MB with ultra pure graphite (99.99%) was pressed in disk format and used to fabricate a working electrode that displayed an excellent specific electrocatalytic response to NADH oxidation, with a formal potential of -0.05 V at pH 7.3. The electrochemical properties of the resulting electrode were investigated thoroughly with cyclic voltammetric and chronoamperometry techniques. The proposed sensor showed a good linear response range for NADH concentrations between 8×10(-5) and 9.0×10(-4) mol L(-1), with a detection limit of 1.5×10(-7) mol L(-1). The presence of dopamine and ascorbic acid did not show any interference in the detection of NADH on this modified electrode surface.

Niobium oxide dispersed on a carbon-ceramic matrix, SiO2/C/Nb2O5, used as an electrochemical ascorbic acid sensor.

A film of niobium oxide was immobilized on a SiO(2)/C carbon-ceramic matrix (specific surface area 270 m(2)g(-1)) and characterized by N(2) adsorption-desorption isotherms, scanning electron microscopy, X-ray photoelectron spectroscopy and atomic force microscopy. This new carbon-ceramic material, SiO(2)/C/Nb(2)O(5), was used for construction of electrodes, and it shows ability to improve the electron-transfer between the electrode surface and ascorbic acid. The electrocatalytic oxidation of ascorbic acid was made by differential pulse and cyclic voltammetry techniques, making it potentially useful for developing a new ascorbic acid sensor.

Electrocatalysis of reduced L-glutathione oxidation by iron(III) tetra-(N-methyl-4-pyridyl)-porphyrin (FeT4MPyP) adsorbed on multi-walled carbon nanotubes.

The development of a highly sensitive voltammetric sensor for reduced l-glutathione (GSH) using a basal plane pyrolytic graphite (BPPG) electrode modified with iron(III) tetra-(N-methyl-4-pyridyl)-porphyrin (FeT4MPyP) adsorbed on multi-walled carbon nanotubes (MWCNT) is described. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) were used to verify the morphologies and composition of the MWCNT after modification with the FeT4MPyP complex. The modified electrode showed very efficient electrocatalytic activity for l-glutathione oxidation, substantially decreasing the oxidation peak to -0.025V vs Ag/AgCl. A linear response range from 5 micromolL(-1) to 5 mmolL(-1) was obtained with a sensitivity of 703.41 microALmmol(-1). The detection limit for GSH determination was 0.5 micromolL(-1) and the relative standard deviation (R.S.D.) for 10 determinations of 250 micromolL(-1) GSH was 1.4%. The modified electrode was applied for GSH determination in erythrocyte samples and the results were in agreement to those obtained by a comparative method described in the literature.

Anisotropic self-organization of hybrid silica based xerogels containing bridged positively charged 1,4-diazoniabicycle[2.2.2]octane chloride group.

Anisotropic self-organized hybrid silica based xerogels were obtained. The ordered structure was imposed by the double charged 1,4-diazoniabicycle[2.2.2]octane chloride group bonded in a bridged way. This was confirmed by the presence of well defined X-ray diffraction peaks corresponding to an interplanar distance with the same length estimated for the organic bridged groups. The material was characterized by elemental analysis using CHN technique and the chloride ion was analyzed by a potentiometric titration. (13)C and (29)Si CP MAS solid state NMR spectroscopy and thermogravimetric analysis were also performed. The material that can be obtained in the form of powders and transparent monoliths or films, is thermally stable up to 260 degrees C and the samples with high organic content presented birefringence properties.

Removal of methylene blue dye from aqueous solutions by adsorption using yellow passion fruit peel as adsorbent.

The removal of color from aquatic systems caused by presence of synthetic dyes is extremely important from the environmental viewpoint because most of these dyes are toxic, mutagenic and carcinogenic. In this present study, the yellow passion fruit (Passiflora edulis Sims. f. flavicarpa Degener) peel a powdered solid waste, was tested as an alternative low-cost adsorbent for the removal of a basic dye, methylene blue (MB), from aqueous solutions. Adsorption of MB onto this natural adsorbent was studied by batch adsorption isotherms at room temperature. The effects of shaking time and pH on adsorption capacity were studied. An alkaline pH was favorable for the adsorption of MB. The contact time required to obtain the maximum adsorption was 56 h at 25 degrees C. Yellow passion fruit peel may be used as an alternative adsorbent to remove MB from aqueous solutions.

n-Propylpyridinium chloride-modified poly(dimethylsiloxane) elastomeric networks: preparation, characterization, and study of metal chloride adsorption from ethanol solutions.

An n-propylpyridinium chloride-modified PDMS elastomeric network, PDMS/Py(+)Cl(-), was prepared from linear PDMS chains containing Si(CH(3))(2)OH end-groups cross-linked by 3-chloropropyltrimethoxysilane and posterior reaction with pyridine. PDMS/Py(+)Cl(-) material was structurally characterized by infrared spectroscopy (IR) and solid state (13)C and (29)Si NMR. Thermogravimetric analysis of the product showed good thermal stability, with the initial temperature of weight loss at 450 K. The ion-exchange capacity of the PDMS/Py(+)Cl(-) was 0.65 mmol g(-1). Metal halides, MCl(z) [M=Fe(3+), Cu(2+), and Co(2+)], were adsorbed by the modified solid from ethanol solutions as neutral species by forming the surface anionic complexes MCl(z+n)(n-). The nature of the anionic complex structure was proposed by UV-vis diffuse reflectance spectra. The species adsorbed were FeCl(-)(4), CuCl(2-)(4), and CoCl(2-)(4). The specific sorption capacities and the heterogeneous stability constants of the immobilized metal complexes were determined with the aid of computational procedures. The trend in affinities of PDMS/Py(+)Cl(-) for the metal halides were found to be FeCl(3)>CuCl(2) approximately CoCl(2).

Simulation of adsorption equilibria on hybrid materials: binding of metal chlorides with 3-n-propylpyridinium silsesquioxane chloride ion exchanger.

The quantitative description of cooperativity effects at binding of low-molecular reagents with active reactive centers of hybrid materials requires the elaboration of convenient and reliable meaningful models and calculation procedures. The model of fixed polydentate centers was analyzed as a prospective tool for simulation of adsorption equilibria. The model was shown to be flexible and adaptive. At the theoretic foundations, it is equivalent or more general as compared with another approaches. The procedure for constructing the models fitting the experimental data within their errors and the corresponding calculation tools were discussed. The special attention was paid to the problem of simultaneous determination of sorption capacities and equilibrium constants. To overcome this difficulty the strategy involving the fuzzy sets theory was proposed. The elaborated methods were used to characterize a new material, 3-n-propylpyridinium silsesquioxane chloride ion exchanger. Adsorption of Fe(III), Cu(II), Zn(II), Cd(II), and Hg(II) chlorides by the material from ethanol solutions was studied at 298 K. The material was found to possess a high affinity to metal chlorides. The sorption capacities of the material and the constants of adsorption equilibria were determined. The material demonstrates the following order of affinity: FeCl(3) > CuCl(2), HgCl(2) > CdCl(2) > ZnCl(2). On the base of simulation, the negative cooperativity in the case of the CuCl(2) adsorption was concluded, while adsorption of other chlorides is accompanied by the positive cooperativity.

Use of Ponkan mandarin peels as biosorbent for toxic metals uptake from aqueous solutions.

Waste Ponkan mandarin (Citrus reticulata) peel was used as biosorbent to extract Ni(II), Co(II) and Cu(II) from aqueous solutions at room temperature. To achieve the best adsorption conditions the influence of pH and contact time were investigated. The isotherms of adsorption were fitted to the Langmuir equation. Based on the capacity of adsorption of the natural biosorbent to interact with the metallic ions, the following results were obtained 1.92, 1.37 and 1.31 mmol g(-1) for Ni(II), Co(II) and Cu(II), respectively, reflecting a maximum adsorption order of Ni(II)>Co(II)>Cu(II). The quick adsorption process reached the equilibrium before 5, 10 and 15 min for Ni(II), Co(II) and Cu(II), respectively, with maximum adsorptions at pH 4.8. In order to evaluate the Ponkan mandarin peel a biosorbent in dynamic system, a glass column was fulfilled with 1.00 g of this natural adsorbent, and it was fed with 5.00 x 10(-4)mol l(-1) of Ni(II) or Co(II) or Cu(II) at pH 4.8 and 3.5 ml min(-1). The lower breakpoints (BP(1)) were attained at concentrations of effluent of the column attained the maximum limit allowed of these elements in waters (>0.1 mg l(-1)) which were: 110, 100 and 130 bed volumes (V(effluent)/V(adsorbent)), for Ni(II), Co(II) and Cu(II), respectively. The higher breakpoints (BP(2)) were attained when the complete saturation of the natural adsorbent occurred, and the values obtained were: 740, 540 and 520 bed volumes for Ni(II), Co(II) and Cu(II), respectively.

Structure and property studies of hybrid xerogels containing bridged positively charged 1,4-diazoniabicycle[2.2.2]octane dichloride.

The compound di-3-n-propyltrimethoxysilane (1,4-diazoniabicycle[2.2.2]octane) dichloride, [(MeO)3Si(CH2)3N+ (CH2CH2)3N+ (CH2)3Si(OME)3]Cl2 was obtained and was used as a precursor reagent to obtain hybrid xerogels where the organic molecule was bonded to a silica framework by reacting the ends of both sides of the precursor reagent. That is, both -Si(OME)3 groups react with tetraethylorthosilicate (TEOS) by hydrolysis-condensation reactions. The resulting hybrid xerogels with variable C/Si mole ratios were prepared and analyzed and their textural characteristics determined. The samples prepared presented micropores with diameter 1.5 nm, the chain length of which matched with the estimated length of the organic bridging group. The charged organic bridging groups allow the immobilization of hexacyanoferrate ions by an ion exchange process. The electron transfer process of the hexacyanoferrate anionic complex confined in the pores of the matrices was studied by cyclovoltammetry.

Al2O3-coated 3-N-propylpyridinium chloride silsesquioxane polymer film: preparation and electrochemical property study of adsorbed cobalt tetrasulfophthalocyanine.

Porous Al2O3 presenting a specific surface area of SBET = 105 m2 g(-1) was coated with 3-N-propylpyridinium chloride silsesquioxane polymer. The ion exchange capacity of this polymer grafted onto an Al2O3 surface, resulting in a material designated as AlSiPy(+)Cl-, was 1.09 mmol g(-1). Furthermore, a cobalt(II) tetrasulfophthalocyanine anionic complex was immobilized on the chemically modified surface by an ion exchange reaction with a yield of 40 micromol g(-1) (the surface density of the electroactive species is 3.80 x 10(-11) mol cm(-2)). The electrochemical properties of the material obtained, AlSiPy/CoTsPc, were tested for the catalytic oxidation of oxalic acid at 0.77 V vs SCE in 1.0 mol l(-1) KCl solution. Furthermore, a chronoamperometric technique was used with the electrode to test its potential use as a sensor for oxalic acid. The electrode response to oxalic acid concentrations between 1.0 and 3.5 mmol l(-1) was linear with an estimated detection limit of 0.5 mmol l(-1). The charge transfer resistance of the material, measured using the electrochemical impedance spectroscopy technique, was 43 Omega cm2.

Copper (II) adsorbed on SiO(2)/SnO(2) obtained by the sol-gel processing method: application as electrochemical sensor for ascorbic acid.

With the objective of producing a material showing better conductive properties to be used as a support for electroactive species, a SiO(2)/SnO(2) mixed oxide was prepared. The procedure for SiO(2)/SnO(2) mixed oxide preparation using the sol-gel processing method, starting from tetraethylorthosilicate and SnI(4) as precursor reagents, is described. SiO(2)/SnO(2) with composition Sn=15.6 wt% and S(BET) = 525 m(2)g(-1), V(p)=0.28 mlg(-1), and D(p)= 1.5 nm, where S(BET), V(p) and D(p) are the specific surface area, the average pore volume, and the average pore diameter, respectively, was obtained. The X-ray photoelectron spectroscopy showed that the mixed oxide was thermally very stable for samples heat-treated at up to 1073 K. The Brønsted acid sites, probed with pyridine molecules for samples heat-treated at various temperatures, were chemically stable up to 473 K. Segregation of SnO(2) crystalline phase was observed at 1473 K but no crystalline phase was verified for SiO(2) at this temperature. The porous SiO(2)/SnO(2) matrix was used as base for Cu(II) immobilization and an electrode was developed for application in electrochemical detection of vitamin C in tablets.

Adsorption of metal halides from ethanol solutions by a 3-n-propylpyridiniumsilsesquioxane chloride-coated silica gel surface.

3-n-propylpyridiniumsilsesquioxane chloride polymer, abbreviated as SiPy+Cl-, was used to coat a porous silica gel, SiO2, surface to form the chemically modified solid SiO2/SiPy+Cl-. The resulting polymer film was well adhered to the surface and presented an ion exchange capacity of 0.74 mmol g(-1). Metal halides, MClz [M=Fe(III), Cu(II), and Zn(II)], were adsorbed by the modified solid from ethanol solutions as neutral species by forming the surface anionic complexes described by the equation: mSiO2/SiPy+Cl-+ MClz <=> (SiO2/SiPy+)m[MCl(z+m)]m-, where the [MCl(z+m)]m- species adsorbed on the surface are FeCl4-, ZnCl4(2-), and CuCl4(2-). Accurate estimates of the specific sorption capacities and the heterogeneous stability constants of the immobilized metal complexes were determined with the aid of computational procedures.