RESUMEN
Due to the need of sustainable energy sources, methane dry reforming is a useful reaction for conversion of the greenhouse gases CH4 and CO2 to synthesis gas (CO + H2). Syngas is the basis for a wide range of commodity chemicals and can be utilized for fuel production via Fischer-Tropsch synthesis. The current study focuses on spectroscopic investigations of the surface and reaction properties of a ZrO2/Pt inverse model catalyst, i.e. ZrO2 particles (islands) grown on a Pt(1 1 1) single crystal, with emphasis on in situ near ambient pressure x-ray photoelectron spectroscopy (NAP-XPS) during MDR reaction. In comparison to technological systems, model catalysts facilitate characterization of the surface (oxidation) state, surface adsorbates, and the role of the metal-support interface. Using XPS and infrared reflection absorption spectroscopy we demonstrated that under reducing conditions (UHV or CH4) the ZrO2 particles transformed to an ultrathin ZrO2 film that started to cover (wet) the Pt surface in an SMSI-like fashion, paralleled by a decrease in surface/interface oxygen. In contrast, (more oxidizing) dry reforming conditions with a 1:1 ratio of CH4 and CO2 were stabilizing the ZrO2 particles on the model catalyst surface (or were even reversing the strong metal support interaction (SMSI) effect), as revealed by in situ XPS. Carbon deposits resulting from CH4 dissociation were easily removed by CO2 or by switching to dry reforming conditions (673-873 K). Thus, at these temperatures the active Pt surface remained free of carbon deposits, also preserving the ZrO2/Pt interface.
RESUMEN
The selective hydrogenation of propyne over a Pd-black model catalyst was investigated under operando conditions at 1 bar making use of advanced X-ray diffraction (bulk sensitive) and photo-electron spectroscopy (surface sensitive) techniques. It was found that the population of subsurface species controls the selective catalytic semi-hydrogenation of propyne to propylene due to the formation of surface and near-surface PdCx that inhibits the participation of more reactive bulk hydrogen in the hydrogenation reaction. However, increasing the partial pressure of hydrogen reduces the population of PdCx with the concomitant formation of a ß-PdHx phase up to the surface, which is accompanied by a lattice expansion, allowing the participation of more active bulk hydrogen which is responsible for the unselective total alkyne hydrogenation. Therefore, controlling the surface and subsurface catalyst chemistry is crucial to control the selective alkyne semi-hydrogenation.
RESUMEN
A novel type of temporal and spatial self-organization in a heterogeneous catalytic reaction is described for the first time. Using in situ x-ray photoelectron spectroscopy, gas chromatography, and mass spectrometry, we show that, under certain conditions, self-sustained reaction-rate oscillations arise in the oxidation of propane over Ni foil because of reversible bulk oxidation of Ni to NiO, which can be observed even with the naked eye as chemical waves propagating over the catalyst surface.
RESUMEN
One of the main goals in catalysis is the characterization of solid/gas interfaces in a reaction environment. The electronic structure and chemical composition of surfaces become heavily influenced by the surrounding environment. However, the lack of surface sensitive techniques that are able to monitor these modifications under high pressure conditions hinders the understanding of such processes. This limitation is known throughout the community as the "pressure gap." We have developed a novel experimental setup that provides chemical information on a molecular level under atmospheric pressure and in presence of reactive gases and at elevated temperatures. This approach is based on separating the vacuum environment from the high-pressure environment by a silicon nitride grid-that contains an array of micrometer-sized holes-coated with a bilayer of graphene. Using this configuration, we have investigated the local electronic structure of catalysts by means of photoelectron spectroscopy and in presence of gases at 1 atm. The reaction products were monitored online by mass spectrometry and gas chromatography. The successful operation of this setup was demonstrated with three different examples: the oxidation/reduction reaction of iridium (noble metal) and copper (transition metal) nanoparticles and with the hydrogenation of propyne on Pd black catalyst (powder).
RESUMEN
Iridium oxide based electrodes are among the most promising candidates for electrocatalyzing the oxygen evolution reaction, making it imperative to understand their chemical/electronic structure. However, the complexity of iridium oxide's electronic structure makes it particularly difficult to experimentally determine the chemical state of the active surface species. To achieve an accurate understanding of the electronic structure of iridium oxide surfaces, we have combined synchrotron-based X-ray photoemission and absorption spectroscopies with ab initio calculations. Our investigation reveals a pre-edge feature in the O K-edge of highly catalytically active X-ray amorphous iridium oxides that we have identified as O 2p hole states forming in conjunction with Ir(III). These electronic defects in the near-surface region of the anionic and cationic framework are likely critical for the enhanced activity of amorphous iridium oxides relative to their crystalline counterparts.
RESUMEN
Heterogeneous chemical reactions at vapor/solid interfaces play an important role in many processes in the environment and technology. Ambient pressure X-ray photoelectron spectroscopy (APXPS) is a valuable tool to investigate the elemental composition and chemical specificity of surfaces and adsorbates on the molecular scale at pressures of up to 130 mbar. In this review we summarize the historical development of APXPS since its introduction over forty years ago, discuss different approaches to minimize scattering of electrons by gas molecules, and give a comprehensive overview about the experimental systems (vapor/solid interfaces) that have been studied so far. We also present several examples for the application of APXPS to environmental science, heterogeneous catalysis, and electrochemistry.
RESUMEN
One of the prerequisites for the detailed understanding of heterogeneous catalysis is the identification of the dynamic response of the catalyst surface under variable reaction conditions. The present study of methanol oxidation on different model Ru pre-catalysts, performed approaching the realistic catalytic reaction conditions, provides direct evidence of the significant effect of reactants' chemical potentials and temperature on the catalyst surface composition and the corresponding catalytic activity and selectivity. The experiments were carried out for three regimes of oxygen potentials in the 10(-1) mbar pressure range, combining in situ analysis of the catalyst surface by synchrotron-based photoelectron core level spectroscopy with simultaneous monitoring of the products released in the gas phase by mass spectroscopy. Metallic Ru with adsorbed oxygen and transient 'surface oxide', RuO(x), with varying x have been identified as the catalytically active states under specific reaction conditions, favouring partial or full oxidation pathways. It has been shown that the composition of catalytically active steady states, exhibiting different activity and selectivity, evolves under the reaction conditions, independent of the crystallographic orientation and the initial pre-catalyst chemical state, metallic Ru or RuO(2).
RESUMEN
The adsorbate species present during partial oxidation of methanol on a Cu(110) surface have been investigated in the 10(-5) mbar range with in situ x-ray photoelectron spectroscopy and rate measurements. Two reaction intermediates were identified, methoxy with a C 1s binding energy (BE) of 285.4 eV and formate with a C 1s BE of 287.7 eV. The c(2x2) overlayer formed under reaction conditions is assigned to formate. Two states of adsorbed oxygen were found characterized by O 1s BE's of 529.6 and 528.9 eV, respectively. On the inactive surface present at low T around 300-350 K formate dominates while methoxy is almost absent. Ignition of the reaction correlates with a decreasing formate coverage. A large hysteresis of approximately 200 K occurs in T-cycling experiments whose correlation with adsorbate species was studied with varying oxygen and methanol partial pressures. The two branches of the hysteresis differ mainly in the amount of adsorbed oxygen, the methoxy species, and a carbonaceous species. Methoxy covers only a minor part of the catalytic surface reaching at most 20%. Above 650 K the surface is largely adsorbate-free.
RESUMEN
Using single crystal V2O5 as a sample, we tested the performance of the new aberration corrected GATAN spectrometer on a monochromatised 200 kV FEG FEI (S)TEM. The obtained V L and O K ELNES were compared with that obtained in a common GATAN GIF and that in the new spectrometer, without monochromatised beam. The performance of the new instrumentation is impressive: recorded with an energy-resolution of 0.22 eV, the V L(3) edge reveals all the features due to the bulk electronic structure, that are also revealed in near-edge X-ray absorption fine structure (NEXAFS) with a much higher energy-resolution (0.08 eV). All features of the ELNES and NEXAFS are in line with a theoretical spectrum derived from band-structure calculations.
RESUMEN
The catalytically active copper phase for the partial oxidation of methanol is studied by means of time-resolved extended X-ray absorption fine structure (EXAFS) spectroscopy combined with the detection of the catalytic turnover. It is found that the active form of the copper is a strained nanocrystalline form of the metal. The metal is no longer made up from large crystallites but contains a defect structure in which oxygen is already intercalated.