RESUMEN
Collagen is one of the most common natural absorbable polymers, which is widely used as a barrier membrane in biomedical fields due to its many desirable biological properties. However, absorbable membranes such as collagen have their own disadvantages such as unpredictable degradation rates, poor rigidity leading to tissue collapse, and limited osteogenic properties and cell adhesion. In this study, a modified collagen membrane with a polydopamine-graphene oxide (PDA/GO) complex was synthesized to improve the characteristics of collagen for bone tissue engineering. The successful synthesis of PDA/GO on collagen membranes was verified using X-ray photoelectron spectroscopy (XPS) and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). The wettability of PDA/GO-modified collagen membranes was considerably improved based on the characterization by water contact angle compared to the uncoated membranes and surface coatings solely by either PDA or GO. The modified PDA/GO coating also enhanced the mechanical properties such as tensile strength and biodegradation rate of collagen membranes. In addition, the PDA/GO coating effectively enhanced the biocompatibility of collagen membranes as verified by the enhanced proliferation and adhesion of human bone marrow stem cells (hBMSCs). Additionally, the effects of PDA/GO coating on the osteogenic differentiation of hBMSCs on collagen membranes were investigated through alkaline phosphatase (ALP) activity and reverse transcription-quantitative polymerase chain reaction (RT-qPCR). The PDA/GO coating on collagen membranes resulted in a significant increase in osteogenic properties compared with the uncoated collagen membranes. According to the results of the current study, the combination of PDA and GO-modified collagen membranes could be used for bone tissue engineering and biomedical applications.
Asunto(s)
Osteogénesis , Ingeniería de Tejidos , Humanos , Colágeno/farmacología , Diferenciación CelularRESUMEN
Purpose: Pennyroyal is a species of the Lamiaceae family with potent anti-cancer and antioxidant properties. Combining this antioxidant with chemotherapeutic agents enhances the effectiveness of these agents by inducing more apoptosis in cancerous cells. Methods: Here, methotrexate (MTX) combined with pennyroyal oil based on PEGylated nanostructured lipid carriers (NLCs) was assessed. These nanoparticles were physiochemically characterized, and their anti-cancer effects and targeting efficiency were investigated on the folate receptor-positive human breast cancer cell line (MCF-7) and negative human alveolar basal epithelial cells (A549). Results: Results showed a mean size of 97.4 ± 12.1 nm for non-targeted PEGylated NLCs and 220.4 ± 11.4 nm for targeted PEGylated NLCs, with an almost small size distribution assessed by TEM imaging. Furthermore, in vitro molecular anti-cancer activity investigations showed that pennyroyal-NLCs and pennyroyal-NLCs/MTX activate the apoptosis and autophagy pathway by changing their related mRNA expression levels. Furthermore, in vitro cellular studies showed that these changes in the level of gene expression could lead to a rise in apoptosis rate from 15.6 ± 8.1 to 25.0 ± 3.2 (P<0.05) for the MCF-7 cells treated with pennyroyal-NLCs and pennyroyal-NLCs/MTX, respectively. Autophagy and reactive oxygen species (ROS) cellular evaluation indicated that treating the cells with pennyroyal-NLCs and pennyroyal-NLCs/MTX could significantly increase their intensity in these cells. Conclusion: Our results present a new NLCs-based approach to enhance the delivery of pennyroyal and MTX to cancerous breast tissues.
RESUMEN
This work aimed to determine the physicochemical and biochemical properties of trypsin from beluga Huso huso and sevruga Acipenser stellatus, two highly valuable sturgeon species. According to the results obtained from the methods of casein-zymogram and inhibitory activity staining, the molecular weight of trypsin for sevruga and beluga was 27.5 and 29.5 kDa, respectively. Optimum pH and temperature values for both trypsins were recorded at 8.5 and 55 °C by BAPNA (a specific substrate), respectively. The stability of both trypsins was well-preserved at pH values from 6.0 to 11.0 and temperatures up to 50 °C. TLCK and SBTI, two specific trypsin inhibitors, showed a significant inhibitory effect on the enzymatic activity of both trypsins (p < 0.05). The enzyme activity was significantly increased in the presence of Ca+2 and surfactants and decreased by oxidizing agents, Cu+2, Zn+2, and Co+2 (p < 0.05). However, univalent ions Na+ and K+ did not show any significant effect on the activity of both trypsins (p > 0.05). The results of our study show that the properties of trypsin from beluga and sevruga are in agreement with data reported in bony fish and can contribute to the clear understanding of trypsin activity in these primitive species.
RESUMEN
Internal fixation devices made of nickel-titanium (NiTi) staples have the advantage of producing compressive stress at the fracture site due to their unique shape memory effect and superelasticity. In the present study, a comparison was made between two commercial NiTi staples of the same size but with different bridge configurations, used for scaphoid fracture fixation. The staple and scaphoid anatomical configurations were modeled using SolidWorks, while ABAQUS software was used to analyze the stress and displacement caused by staples and distributed in the scaphoid waist. In the staple with a straight bridge, the regions under the tips of the staple legs underwent the largest stress, whereas there was negligible stress in the regions closer to the staple bridge. In the staple with an S-shaped bridge, the stress concentration was highly localized in the region close to the staple bridge, with a maximum stress that was over eight times higher than in the staple with a straight bridge. Considering the amount and distribution of stress in both staples, neither of the staples was able to create the ideal healing condition on the fracture surface.
Asunto(s)
Fracturas Óseas , Hueso Escafoides , Humanos , Fracturas Óseas/cirugía , Níquel , Titanio , Hueso Escafoides/cirugía , Simulación por ComputadorRESUMEN
Electrospun multilayer nanofibers guided bone regeneration (GBR) with a new design were developed in this study. The synthesized multilayer GBR was composed of two distinct layers. Poly l-lactic acid (PLA) incorporated with simvastatin (SIM) was designed as PLA/SIM layer to contact with a bone defect. In addition, the hydrophilic gelatin (GT) containing thymol (THY) was fabricated as GT/THY layer to contact connective tissue, potentially for bacterial gathering. Due to the different chemical nature and weak cohesion of the hydrophilic and hydrophobic layers, hybrid fibers made of PLA/SIM and GT/THY were electrospun as cohesion promoters between these layers. The microstructure and characteristics of the synthesized multilayer substrate, named GT/PLA, were evaluated, and different fibrous monolayers were fabricated to determine the optimal concentrations of drugs. Scanning electron microscopy (SEM) images showed continuous, smooth, randomly aligned, and bead-free fibers. In addition, there were no drug particles on the fiber surfaces which displayed the good placement of those inside the fibers. The mats exhibited satisfactory tensile strength (4.60 ± 0.14 MPa) and favorable physicochemical properties, including proper porosity percentage (<50 %) and appropriate pore size. Suitable swelling behavior (293 ± 0.05 %) and adequate degradation rates were also approved by characterizing swelling and degradability in vitro. The GT/PLA membrane exhibited a prolonged and sustained SIM release and controlled THY release with high antibacterial efficiency. Cell viability, cell attachment assay, and nuclear staining using 4',6-diamidino-2-phenylindole (DAPI) showed that the designed GT/PLA substrate had good biocompatibility and cell attachment. Cell infiltration testing also showed that the cells were finely prevented by the outer layer (GT/THY). Overall, the obtained results in this study indicated the great potential of the prepared GT/PLA for use as a GBR which can develop osteogenic and antibacterial biomimetic periosteum optimizing the clinical application of GBR strategies.
Asunto(s)
Nanofibras , Ingeniería de Tejidos , Ingeniería de Tejidos/métodos , Nanofibras/química , Liberación de Fármacos , Poliésteres/química , Regeneración Ósea , Antibacterianos/química , Gelatina , Ácido Láctico/química , Andamios del Tejido/químicaRESUMEN
Drug-eluting stents (DESs) are drug-coated vascular implants that inhibit smooth muscle cell proliferation and limit in-stent re-stenosis. However, traditional DESs release a single drug into the blood and cannot cope with complex mechanisms in atherosclerosis and body responses. The present study aimed to develop a novel multimodal stent by fabricating asymmetric coating with electrophoretic deposition and electrospinning. Herein, we use heparin-loaded alginate (Hep/Alg) and atorvastatin calcium-loaded polyurethane (AtvCa/PU) coatings on the stent luminal and abluminal surfaces, respectively. Scanning electron microscopy (SEM) micrographs showed that the alginate coatings had uniformity and thin thickness. Meanwhile, the PU fibers were formed without beads, with an acceptable diameter and suitable mechanical properties. PU nanofiber revealed minimal degradation in a 1-month study. The release of AtvCa and Hep continued for 8 days without a significant initial burst release. None of the stent coatings were cytotoxic or hemolytic, and PU nanofibers supported the survival of human umbilical endothelial cells (HUVEC) with high adhesion and flattened morphologies. The results indicate that electrophoretic deposition and electrospinning have significant potential for achieving asymmetric coating on stents and a promising approach for dual drug release for multimodal effects in vascular stent applications.
Asunto(s)
Stents Liberadores de Fármacos , Humanos , Células Endoteliales , Stents , Liberación de Fármacos , Alginatos , Materiales Biocompatibles RevestidosRESUMEN
Bioactive glasses are highly reactive surface materials synthesized by melting or sol-gel techniques. In this study, mesoporous bioactive glass-ceramics doped with different amounts of vanadium and iron ((60-(x + y)) SiO2-36CaO-4P2O5-xV2O5-yFe2O3, x and y between 0, 5 and, 10 mole%) were synthesized using a sol-gel method. Then, their effects on particle morphology and the biomineralization process were examined in simulated body fluid (SBF). N2 adsorption isotherm analysis proved that the samples have a mesoporous structure. In addition, the Fourier-transform infrared spectroscopy (FTIR) spectra of the samples after soaking in SBF for various periods (7, 14, and 21 days) confirmed the presence of new chemical bonds related to the apatite phase, which is in accordance with scanning electron microscopy (SEM) observations. X-ray diffraction (XRD) patterns of the samples after SBF soaking showed that lower amounts of vanadium and iron were associated with the formation of a stable and more crystalline phase of hydroxyapatite. The MTT results showed that the cell viability of mesoporous bioactive glass containing 5% V2O5 remains more than 90% over 7 days, which indicates the biocompatibility of the samples. To conclude, further studies on these formulations are going to be carried out in future investigations for chemohyperthermia application.
RESUMEN
Many surgical treatments require a suitable tissue adhesive that maintains its performance in wet conditions and can be applied simultaneously for hard and soft tissues. In the present study, a dual cross-linked tissue adhesive was synthesized by mixing the gelatin methacryloyl (Gel-MA) and gelatin-dopamine conjugate (Gel-Dopa). The setting reaction was based on a photopolymerization process in the presence of a combination of riboflavin and triethanolamine and a chemical cross-linking process attributed to the genipin as a natural cross-linker. Modified gelatin macromolecules were characterized and the best wavelength for free radical generation in the presence of riboflavin was obtained. Tissue adhesives were prepared with 30% hydrogels of Gel-MA and Gel-Dopa with different ratios in distilled water. The gelation occurred in a short time after light irradiation. The chemical, mechanical, physical, and cytotoxicity properties of the tissue adhesives were evaluated. The results showed that despite photopolymerization, chemical crosslinking with genipin played a more critical role in the setting process. Water uptake, degradation behavior, cytotoxicity, and adhesion properties of the adhesives were correlated with the ratio of the components. The SEM images showed a porous structure that could ensure the entry of cells and nutrients into the surgical area. While acceptable properties in most experiments were observed, all features were improved as the Gel-Dopa ratio increased. Also, the obtained hydrogels revealed excellent adhesive properties, particularly with bone even after wet incubation, and it was attributed to the amount of gelatin-dopamine conjugate. From the obtained results, it was concluded that a dual adhesive hydrogel based on gelatin macromolecules could be a good candidate as a tissue adhesive in wet condition.
Asunto(s)
Gelatina , Adhesivos Tisulares , Adhesivos/química , Dihidroxifenilalanina/química , Dopamina/química , Gelatina/química , Hidrogeles/química , Iridoides , Metacrilatos , Riboflavina , Adhesivos Tisulares/química , AguaRESUMEN
After myocardial infarction caused by a heart attack, endothelial cells need to be preserved in order to regenerate new capillaries. Moreover, sufficient mechanical support is necessary for the infarcted myocardium to pump the blood. Herein, we designed a novel substrate containing polyurethane (PU) nanofibrous layers and recombinant human erythropoietin (rhEPO)-loaded microparticles for both controlled releases of rhEPO and mechanical support of myocardium. In this system, the single-layer (SL) and double-layer (DL) PU nanofibers were electrospun, and then microparticles with different rhEPO:polyvinyl alcohol (PVA) ratios were electrosprayed on the layers. The in vitro release behavior of rhEPO from SL substrates was not satisfactory, and then the study focused on DL patches in which the release profile was in accordance with Korsmeyer-Peppas model. The release exponent of 0.89 for the DL PU/120PVA:1rhEPO represented zero-order release. The results inferred that these substrates possessed highly tailored mechanical properties; Young's modulus and ultimate tensile strength of the substrates were 74-172 kPa and 7.4-9.9 MPa, respectively. The rhEPO release from the substrates was leading to the proper adhesion of endothelial cells and more than 95% cell viability. The results indicated that the patch of elastic nanofibers and microparticles offered a potential substrate for simultaneous rhEPO delivery to endothelial cells and also mechanically supporting the infarcted myocardium.
Asunto(s)
Eritropoyetina , Nanofibras , Células Endoteliales , Eritropoyetina/farmacología , Humanos , Nanofibras/química , Poliuretanos , Alcohol Polivinílico/químicaRESUMEN
Cancer-targeted co-delivery of therapeutic agents has been recognized as an effective strategy for increasing efficacy and reducing side effects of therapeutic agents. In this study, we used methotrexate (MTX) alone as a targeting moiety and chemotherapeutic agent and in combination with docetaxel (DTX) and doxorubicin (DOX) as chemotherapeutic agents to stop cancer cell proliferation with the aid of newly designed nanostructured lipid carriers (NLCs). The physicochemical properties of our designed nanocomplexes were evaluated by DLS, FT-IR spectroscopy, SEM, and TEM. Moreover, the targeting efficiency of the designed and synthesized nanoplatforms was evaluated on the folate receptor (FR) positive human breast cancer cell line (MCF-7) and FR negative human alveolar basal epithelial cells (A549). The NLCs/DTX/DOX/CS and NLCs/DTX/DOX/CS-MTX complexes significantly increased the cell cytotoxicity and the cell apoptosis rate. However, the complexes significantly reduced the capability of colony formation and cell migration. Our results revealed that NLCs/DTX/DOX/CS-MTX had synergistic cytotoxicity, reactive oxygen spaces, autophagy, and the apoptosis induction ability with an enhanced cellular internalization rate in FR-positive cancer cells, thorough MTX recognition capability. We conclude that the NLCs/DTX/DOX/CS-MTX complex is a new promising paradigm for breast cancer-targeted co-delivery.
Asunto(s)
Protocolos de Quimioterapia Combinada Antineoplásica/farmacología , Neoplasias de la Mama/tratamiento farmacológico , Portadores de Fármacos/química , Lípidos/química , Nanoestructuras/química , Protocolos de Quimioterapia Combinada Antineoplásica/química , Apoptosis , Docetaxel/administración & dosificación , Doxorrubicina/administración & dosificación , Liberación de Fármacos , Femenino , Humanos , Metotrexato/administración & dosificación , Células Tumorales CultivadasRESUMEN
Peripheral nerve repair is still one of the major clinical challenges which has received a great deal of attention. Nerve tissue engineering is a novel treatment approach that provides a permissive environment for neural cells to overcome the constraints of repair. Conductivity and interconnected porosity are two required characteristics for a scaffold to be effective in nerve regeneration. In this study, we aimed to fabricate a conductive scaffold with controlled porosity using polycaprolactone (PCL) and chitosan (Chit), FDA approved materials for the use in implantable medical devices. A novel method of using tetrakis (hydroxymethyl) phosphonium chloride (THPC) and formaldehyde was applied for in situ synthesis of gold nanoparticles (AuNPs) on the scaffolds. In order to achieve desirable porosity, different percentage of polyethylene oxide (PEO) was used as sacrificial fiber. Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FE-SEM) results demonstrated the complete removing of PEO from the scaffolds after washing and construction of interconnected porosities, respectively. Elemental and electrical analysis revealed the successful synthesis of AuNPs with uniform distribution and small average diameter on the PCL/Chit scaffold. Contact angle measurements showed the effect of porosity on hydrophilic properties of the scaffolds, where the porosity of 75-80% remarkably improved surface hydrophilicity. Finally, the effect of conductive nanofibrous scaffold on Schwann cells morphology and vaibility was investigated using FE-SEM and MTT assay, respectively. The results showed that these conductive scaffolds had no cytotoxic effect and support the spindle-shaped morphology of cells with elongated process which are typical of Schwann cell cultures.
Asunto(s)
Materiales Biocompatibles , Ensayo de Materiales , Nanofibras/química , Nervios Periféricos/fisiología , Ingeniería de Tejidos/métodos , Andamios del Tejido , Animales , Proliferación Celular , Oro , Humanos , Nanopartículas del Metal , Microscopía Electrónica de Rastreo , Regeneración Nerviosa/fisiología , Porosidad , Células de Schwann/fisiologíaRESUMEN
Replacement of peripheral nerve autografts with tissue engineered nerve grafts will potentially resolve the lack of nerve tissue especially in patients with severe concomitant soft tissue injuries. This study attempted to fabricate a tissue engineered nerve graft composed of electrospun PCL conduit filled with collagen-hyaluronic acid (COL-HA) sponge with different COL-HA weight ratios including 100:0, 98:2, 95:5 and 90:10. The effect of HA addition on the sponge porosity, mechanical properties, water absorption and degradation rate was assessed. A good cohesion between the electrospun PCL nanofibers and COL-HA sponges were seen in all sponges with different HA contents. Mechanical properties of PCL nanofibrous layer were similar to the rat sciatic nerve; the ultimate tensile strength was 2.23 ± 0.35 MPa at the elongation of 35%. Additionally, Schwann cell proliferation and morphology on three dimensional (3D) composite scaffold were evaluated by using MTT and SEM assays, respectively. Rising the HA content resulted in higher water absorption as well as greater pore size and porosity, while a decrease in Schwann cell proliferation compared to pure collagen sponge, although reduction in cell proliferation was not statistically significant. The lower Schwann cell proliferation on the COL-HA was attributed to the greater degradation rate and pore size of the COL-HA sponges. Also, dorsal root ganglion assay showed that the engineered 3D construct significantly increases axon growth. Taken together, these results suggest that the fabricated 3D composite scaffold provide a permissive environment for Schwann cells proliferation and maturation and can encourage axon growth.
Asunto(s)
Nanofibras/química , Regeneración Nerviosa , Poliésteres/química , Andamios del Tejido/química , Animales , Proliferación Celular , Células Cultivadas , Nanofibras/ultraestructura , Ratas Wistar , Células de Schwann/citología , Ingeniería de Tejidos/métodosRESUMEN
The aim of this study was to investigate the net effect of raw carbon nanotube (CNTs) on the final properties of polyurethane (PU)/CNT composites considering their biomedical applications. So, neat PU and PU/CNT composites containing different amounts of CNTs (0.05%, 0.1%, 0.5%, and 1%) were prepared by electrospinning. Electrospinning parameters optimized to have a bead-free structure with no significant difference between their mean fiber diameter and porosity percentage. The results showed adding CNTs caused an increase in crystallinity percentage, water absorption ratio, young modulus, toughness, conductivity, degradation time in an accelerated medium, clotting time, and human umbilical vein endothelial cells adhesion. But a direct relationship between CNT percentage and the calcium adsorption was not detected. Moreover, no significant cytotoxicity was observed for 7-day extracts of all samples. These nanocomposites have a vast range of properties which make them a good candidate as neural, cardiovascular, osseous biomaterials or tendon, and ligament substitute.
Asunto(s)
Nanocompuestos , Nanotubos de Carbono , Materiales Biocompatibles , Conductividad Eléctrica , Humanos , PoliuretanosRESUMEN
Developing smart scaffolds with drug release capability is one of the main approaches to bone tissue engineering. The current study involves the fabrication of novel gelatin (G)-hydroxyapatite (HA)-/vitamin D (VD)-loaded graphene oxide (GO) scaffolds with different concentrations through solvent-casting method. Characterizations confirmed the successful synthesis of HA and GO, and VD was loaded in GO with 36.87 ± 4.87% encapsulation efficiency. Physicochemical characterizations showed that the scaffold containing 1% VD-loaded GO had the best mechanical properties and its porosity percentage and density was in the range of natural spongy bone. All scaffolds were degraded after 1-month, subjecting to phosphate buffer saline. The release profile of VD did not match any mathematical kinetics model, porosities and the degradation rate of the scaffolds were dominant controlling factors of release behavior. Studies on the bioactivity of scaffolds immersed in simulated body fluid indicated that VD and HA could encourage the formation of secondary apatite crystals in vitro. Buccal fat pad-derived stem cells (BFPSCs) were seeded on the scaffolds, MTT assay, alkaline phosphatase activity as an indicator of osteoconductivity, and cell adhesion were conducted in order to evaluate in vitro biological responses. All scaffolds highly supported cell adhesion, MTT assay indicated better cell viability in 0.5% VD-loaded GO containing scaffold, and the scaffold enriched with 2% VD-loaded GO performed the most ALP activity. The results demonstrated the potential of these scaffolds to induce bone regeneration. Developing smart scaffolds with drug release capability is one of the main approaches to bone tissue engineering. The current study involves the fabrication of novel gelatin (G)-hydroxyapatite (HA)-/vitamin D (VD)-loaded graphene oxide (GO) scaffolds with different concentrations through solvent-casting method. Characterizations confirmed the successful synthesis of HA and GO, and VD was loaded in GO with 36.87 ± 4.87% encapsulation efficiency. Physicochemical characterizations showed that the scaffold containing 1% VD-loaded GO had the best mechanical properties and its porosity percentage and density was in the range of natural spongy bone. All scaffolds were degraded after 1-month, subjecting to phosphate buffer saline. The release profile of VD did not match any mathematical kinetics model, porosities and the degradation rate of the scaffolds were dominant controlling factors of release behavior. Studies on the bioactivity of scaffolds immersed in simulated body fluid indicated that VD and HA could encourage the formation of secondary apatite crystals in vitro. Buccal fat pad-derived stem cells (BFPSCs) were seeded on the scaffolds, MTT assay, alkaline phosphatase activity as an indicator of osteoconductivity, and cell adhesion were conducted in order to evaluate in vitro biological responses. All scaffolds highly supported cell adhesion, MTT assay indicated better cell viability in 0.5% VD-loaded GO containing scaffold, and the scaffold enriched with 2% VD-loaded GO performed the most ALP activity. The results demonstrated the potential of these scaffolds to induce bone regeneration.
Asunto(s)
Materiales Biocompatibles/química , Huesos/metabolismo , Liberación de Fármacos , Durapatita/química , Gelatina/química , Grafito/química , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Vitamina D/administración & dosificación , Líquidos Corporales , Regeneración Ósea/efectos de los fármacos , Adhesión Celular , Proliferación Celular/efectos de los fármacos , Supervivencia Celular , Difusión , Humanos , Técnicas In Vitro , Cinética , Modelos Teóricos , Osteogénesis/efectos de los fármacos , Porosidad , Polvos , Espectroscopía Infrarroja por Transformada de Fourier , Células Madre/metabolismo , Estrés Mecánico , Sales de Tetrazolio/química , Tiazoles/químicaRESUMEN
Genipin can improve weak mechanical properties and control high degradation rate of gelatin, as a cross-linker of gelatin which is widely used in tissue engineering. In this study, genipin cross-linked gelatin biodegradable porous scaffolds with different weight percentages of gelatin and genipin were prepared for tissue regeneration and measurement of their various properties including morphological characteristics, mechanical properties, swelling, degree of crosslinking and degradation rate. Results indicated that the sample containing the highest amount of gelatin and genipin had the highest degree of crosslinking and increasing the percentage of genipin from 0.125% to 0.5% enhances ultimate tensile strength (UTS) up to 113% and 92%, for samples with 2.5% and 10% gelatin, respectively. For these samples, increasing the percentage of genipin, reduce their degradation rate significantly with an average value of 124%. Furthermore, experimental data are used to develop a machine learning model, which compares artificial neural networks (ANN) and kernel ridge regression (KRR) to predict degradation rate of genipin-cross-linked gelatin scaffolds as a property of interest. The predicted degradation rate demonstrates that the ANN, with mean squared error (MSE) of 2.68%, outperforms the KRR with MSEâ¯=â¯4.78% in terms of accuracy. These results suggest that machine learning models offer an excellent prediction accuracy to estimate the degradation rate which will significantly help reducing experimental costs needed to carry out scaffold design.
Asunto(s)
Gelatina/química , Iridoides/química , Aprendizaje Automático , Andamios del Tejido/química , Reactivos de Enlaces Cruzados/química , Gelatina/metabolismo , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Modelos Teóricos , Redes Neurales de la Computación , Análisis de RegresiónRESUMEN
Titanium and its alloys due to their low density, good mechanical and biological properties are of the most common orthopedic metals. One of the main challenges regarding to titanium implants is their loosening after long term implantation in patient's body. Many methods such as alteration in surface topography with focus on improving osseointegration or biocompatibility in overall are supposed to overcome this issue. In this research, titanium surface topography is altered via electrospraying a solution of titanium salt, carrier polymer (polyvinylpyrrolidone) and solvents. The dip coated samples in the same solution are prepared and investigated as control. The electrosprayed or dip coated samples were pyrolysised in furnace at 500⯰C to remove polymeric components. Then the stabilized microstructures on the surfaces were evaluated via scanning electron microscopy (SEM), water contact angle (WCA) measurement, X-ray diffraction (XRD) and atomic force microscope (AFM). Also, in order to study the bioactivity of modified samples, they were immersed in simulated body fluid (SBF) and their precipitates were studied. The cellular investigations were done by studying the cell morphology, MTT and alkaline phosphatase (ALP) activity assays. The results showed improvement in bioactivity and cellular response for DP3 and SP15 more than other samples implying the promising potential of these two approaches for titanium implant surface modification.
Asunto(s)
Prótesis e Implantes , Ingeniería de Tejidos/métodos , Titanio/química , Animales , Calcio/análisis , Forma de la Célula , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/ultraestructura , Microscopía de Fuerza Atómica , Fósforo/análisis , Conejos , Propiedades de Superficie , Agua , Difracción de Rayos XRESUMEN
The combination of protein-polysaccharide in scaffolding together with the ability to induce bone-like apatite formation has become a promising approach to mimic extracellular matrix composition. In the present study, we developed and characterized new bioactive composite scaffolds from kappa-carrageenan/silk fibroin for bone regeneration applications. Three dimensional (3D) scaffolds were fabricated by adding various amounts of carrageenan to a silk fibroin solution, followed by freeze-drying. Various characterization techniques were applied to analyze such items as the structure, morphology, compressive strength, and bone-like apatite mineralization of the composites, which were then compared to those of pure fibroin scaffolds. The results demonstrated the formation of a highly porous structure with interconnected pores. The mean pore size and porosity both increased by increasing carrageenan content. Moreover, the addition of carrageenan to silk fibroin led to the formation of a bone-like apatite layer throughout the scaffolds after 7days of soaking them in simulated body fluid. Osteoblast-like cell (MG 63) culture experiments indicated that all scaffolds are biocompatible. The cells attached well to the surfaces of all scaffolds and tended to join their adjacent cells. However, higher carrageenan content led to better cellular proliferation and higher Alkaline phosphatase expression.
Asunto(s)
Seda , Materiales Biocompatibles , Biomimética , Regeneración Ósea , Carragenina , Fibroínas , Porosidad , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
Given the large differences in nervous tissue and other tissues of the human body and its unique features, such as poor and/or lack of repair, there are many challenges in the repair process of this tissue. Tissue engineering is one of the most effective approaches to repair neural damages. Scaffolds made from electrospun fibers have special potential in cell adhesion, function and cell proliferation. This research attempted to design a high porous nanofibrous scaffold using hyaluronic acid and polycaprolactone to provide ideal conditions for nerve regeneration by applying proper physicochemical and mechanical signals. Chemical and mechanical properties of pure PCL and PCL/HA nanofibrous scaffolds were measured by FTIR and tensile test. Morphology, swelling behavior, and biodegradability of the scaffolds were evaluated too. Porosity of various layers of scaffolds was measured by image analysis method. To assess the cell-scaffold interaction, SH-SY5Y human neuroblastoma cell line were cultured on the electrospun scaffolds. Taken together, these results suggest that the blended nanofibrous scaffolds PCL/HA 95:5 exhibit the most balanced properties to meet all of the required specifications for neural cells and have potential application in neural tissue engineering.
Asunto(s)
Ácido Hialurónico/química , Nanofibras/química , Poliésteres/química , Ingeniería de Tejidos , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Adhesión Celular/efectos de los fármacos , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Humanos , Microscopía Electrónica de Rastreo , Porosidad , Espectroscopía Infrarroja por Transformada de Fourier , Andamios del Tejido/químicaRESUMEN
Gamma irradiation is able to affect various structural and biological properties of biomaterials In this study, a composite of Hap/PLGA-PEG and their ingredients were submitted to gamma irradiation doses of 25 and 50 KGy. Various properties such as molecular weight (GPC), thermal behavior (DSC), wettability (contact angle), cell viability (MTT assay), and alkaline phosphatase activity were studied for the composites and each of their ingredients. The results showed a decrease in molecular weight of copolymer with no change in the glass transition and melting temperatures after gamma irradiation. In general gamma irradiation can increase the activation energy ΔH of the composites and their ingredients. While gamma irradiation had no effect on the wettability of copolymer samples, there was a significant decrease in contact angle of hydroxyapatite and composites with increase in gamma irradiation dose. This study showed an increase in biocompatibility of hydroxyapatite with gamma irradiation with no significant effect on cell viability in copolymer and composite samples. In spite of the fact that no change occurred in alkaline phosphatase activity of composite samples, results indicated a decrease in alkaline phosphatase activity in irradiated hydroxyapatites. These effects on the properties of PLGA-PEG-hydroxyapatite can enhance the composite application as a biomaterial.