A comparative study of indexes used for litter pollution assessment in urban and public environments.

Litter is a common pollution in the urban environment and public places such as beaches, which has serious health and economic consequences. Several indexes are used to interpret the pollution status caused by litter, which have different limitations and strengths. In this review, the efficiency and characteristics of different indexes were compared. For this purpose, related articles were searched in Scopus, PubMed, and Web of Knowledge, and after screening, 21 articles were selected. The main questions of this study included factors affecting the interpretation of pollution in different indexes and the criteria considered in each index. The results showed that the existing indexes based on the type of litter include two categories of comprehensive indexes such as Clean Environment Index and specific indexes such as Cigarette Butt Pollution Index. Also, the index can be divided into two categories in terms of spatial application, including general indexes such as Environmental Status and specific indexes such as Clean Coast Index. An important difference in the indexes is the importance of the impact of the pollution potential of different litter in the assessment of the status in indexes such as Clean Environment Index and Environmental Status, while indexes such as Clean Coast Index evaluate the status based only on the density of litter. According to the capabilities of each of the indexes, it is necessary to pay attention to the local needs as well as the characteristics of each index in using in urban management plans.

Parametric study and process modeling for metronidazole removal by rhombic dodecahedron ZIF-67 crystals.

Metronidazole (MNZ) is an extensively used antibiotic against bacterial infections for humans and farm animals. Prevention of antibiotics discharge is essential to prevent adverse environmental and health impacts. A member of metal-organic frameworks, zeolite imidazole framework-67 with cobalt sulfate precursor (ZIF-67-SO4) and exceptional physio-chemical properties was prepared via room temperature precipitation to adsorb MNZ. The study framework was designed by Box-Behnken Design to evaluate the effect of pH, ZIF-67-SO4 dose, and contact time on adsorption efficiency. The polynomial model fitted the adsorption system indicated the optimal condition for 97% MNZ removal occurs at pH = 7, adsorbent dosage = 1 g/L, and mixing time = 60 min. The model also revealed that the removal increased with contact time and decreased at strong pH. Equilibrium and kinetic study also indicated the adsorption of MNZ followed the intra-particle diffusion model and the Langmuir isotherm model with a qmax = 63.03 mg/g. The insignificant loss in removal efficacy in use-reuse adsorption cycles reflected the practical viability of ZIF-67-SO4.

Nickel and iron-based metal-organic frameworks for removal of organic and inorganic model contaminants.

Metal-organic frameworks (MOFs) are a promising class of porous nanomaterials in the field of environmental remediation. Ni-MOF and Fe-MOF were chosen for their advantages such as structural robustness and ease of synthesis route. The structure of prepared MOFs was characterized using FE-SEM, XRD, FTIR, and N2 adsorption-desorption. The efficiency of MOFs to remove organic model contaminants (anionic Alizarin Red S (ARS) and cationic malachite green (MG) and inorganic fluoride was studied. Fe-MOF and Ni-MOF adsorbed 67, 88, 6% and 32, 5, and 9% of fluoride, ARS, and MG, respectively. Further study on ARS adsorption by Fe-MOF showed that the removal efficiency was high in a wide range of pH from 3 to 9. Moreover, dye removal was directly increased by adsorbent mass (0.1-0.75 g/L) and decreased by ARS concentration (25-100 mg/L). The pseudo-first-order kinetic model and Langmuir isotherm model with a qmax of 176.68 mg/g described the experimental data well. The separation factor, KL, was in the range of 0-1, which means the adsorption process was favorable. In conclusion, Fe-MOF showed remarkable adsorption of organic and inorganic model contaminants.

Effective adsorptive removal of reactive dyes by magnetic chitosan nanoparticles: Kinetic, isothermal studies and response surface methodology.

In the present study, magnetic chitosan (MC) was synthesized, characterized, and used as an efficient adsorbent for the removal of Reactive Red 141 (RR-141) and Reactive Yellow 14 (RY-14) dyes. Synthesized magnetic chitosan nanoparticles were used for characterization with the help of scanning electron microscope (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), and X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). The effect of the pH, concentration of pollutants, and adsorbent dosage on the amount of adsorption was studied. Under optimum conditions, the removal rate of RR-141 and RY-14 was 99.5 and 92.7%, respectively. The maximum adsorption capacities were obtained 98.8 and 89.7 mg/g for the RR141 and RY-14, respectively. The results from isotherm models showed that the adsorption of dyes on magnetic chitosan nanocomposite correlated well with Freundlich model, whereas the kinetics studies revealed that the adsorption process was fitted by pseudo-first-order for both dyes. Results of the reusability tests confirmed the magnetic chitosan (MC) nanoparticles could be used for several times. Based on the experimental results obtained, the MC has adequate potential for the treatment of water contaminated with anionic dyes.

Data on fluoride concentration in drinking water resources in Iran: A case study of Fars province; Larestan region.

Fluoride is a natural element among minerals, geochemical sediments and natural water systems which is entered to body chain by drinking water. Groundwater is the main and the best source of drinking water in southern areas of Iran especially in the cities of Lar and Gerash (Fars province). So due to the health significance fluoride including dental and skeletal fluorosis, fertility, abortion and thyroid diseases, etc., measuring has high importance in the water resources of this region of Iran. Fluoride concentration was 0.35-3.46 mg/L and 78.26% drinking water sources contains fluoride concentration above the WHO guideline.

Spatial and temporal variability of fluoride concentrations in groundwater resources of Larestan and Gerash regions in Iran from 2003 to 2010.

There is discrepancy about intervals of fluoride monitoring in groundwater resources by Iranian authorities. Spatial and temporal variability of fluoride in groundwater resources of Larestan and Gerash regions in Iran were analyzed from 2003 to 2010 using a geospatial information system and the Mann-Kendall trend test. The mean concentrations of fluoride for the 8-year period in the eight cities and 31 villages were 1.6 and 2.0 mg/l, respectively; the maximum values were 2.4 and 3.8 mg/l, respectively. Spatial, temporal, and spatiotemporal variability of fluoride in overall groundwater resources were relatively constant over the years. However, results of the Mann-Kendall trend test revealed a monotonic trend in the time series of one city and 11 villages for the 8-year period. Specifically, one city and three villages showed positive significant Kendall's Tau values, suggesting an upward trend in fluoride concentrations over the 8-year period. In contrast, seven villages displayed negative significant Kendall's Tau values, arguing for a downward trend in fluoride concentrations over the years. From 2003 to 2010, approximately 52 % of the Larestan and Gerash areas have had fluoride concentrations above the maximum permissible Iranian drinking water standard fluoride level (1.4 mg/l), and about 116,000 people were exposed to such excess amounts. Therefore, our study supports for a close monitoring of fluoride concentrations from health authorities in monthly intervals, especially in villages and cities that showed positive trend in fluoride concentrations. Moreover, we recommend simultaneous implementation of cost-effective protective measures or interventions until a standard fluoride level is achieved.