RESUMEN
Heavy metal contamination in groundwater is a serious threat to the environment and therefore its proper monitoring is a matter of great concern these days. In the present research, groundwater samples from Sehwan Sharif district Jamshoro, Pakistan were collected to estimate the concentration of various elements including potentially hazardous metals. Statistical analysis of the collected data based on Pearson co-relation metal clustering and Principal Component Analysis (PCA) divides the elements into three groups; Group I contains As, Cu, Ni, and Cd, Group II contains Mn, Fe, B, and Cr and Group III contains Pb and Zn. The elements Cu, Ni, As, Pb, Cd, and Zn found with higher RSD values demonstrate their anthropogenic origin whereas the lower concentration of Mn, Fe, B, and Cr indicate their natural origin (Tepanosyan et al., 2016). The histograms and box-plots of Mn, Fe, B and Cr were found normally distributed while abnormal for Cu, Ni, Pb, As, Cd and Zn. The HQs of these elements indicate their non-carcinogenic risks. However, results of individual metallic behavior indicate the highest HQ measured for B followed by HQs for Cu, and As. The toxic effects of investigated metal (loid)s calculated using HI were found to be 1.58 for adults and 1.35 for the child which is considered the medium chromic risk and cancer risk. About the toxicity of these heavy metals, their cancer risk was assessed on the levels of Cd, As, and Cr in groundwater. The carcinogenic risk of As was found to be 2.78 × 10-4 and 1.62 × 10-3 for child and adult, respectively. Furthermore, the values of this carcinogenic risk are 2.64 × 10-6 and 1.54 × 10-5 for Cd while 4.24 × 10-3 and 2.48 × 10-2 for Cr in child and adult, respectively. Since cancer risk exceeded the target risk of 1 × 10-4 for As and Cr in adults and children, it can thus be considered 'non-acceptable'. The Geographic Information System (GIS) based maps were prepared using Inverse Distance Weighted (IDW) interpolation which showed the Spatial distribution of all elements throughout Sehwan Sharif from different sources of environment. Spatial maps of elements produced by ArcGIS show the hotspots of potentially hazardous elements such as the highest concentration of Pb, As, Zn, Cu, Ni, and Cd were found in urban areas of Sehwan Sharif district Jamshoro, Pakistan.
Asunto(s)
Metales Pesados , Neoplasias , Adulto , Cadmio/análisis , Carcinógenos/análisis , Niño , Monitoreo del Ambiente/métodos , Humanos , Plomo/análisis , Metales Pesados/análisis , Metales Pesados/toxicidad , Pakistán , Medición de RiesgoRESUMEN
Availability of clean drinking water is a basic necessity of human population. Therefore, the current study was taken up for spatial analysis and human health risk assessment of elements in Ground water of District Hyderabad, Pakistan. Evaluation of 10 potential hazardous elements in one hundred eighteen samples of ground water from district Hyderabad, Pakistan was done to assess their natural and anthropogenic origin and possible effects on living organisms and human health. Based on statistical tools of Pearson Co-relation, Metal Clustering and Principal Component Analysis (PCA), three groups of elements were produced; First group included Mn, Fe, B and Cr, the second group contained Cu, Ni and As while third group included Pb, Cd and Zn. Higher Relative Standard Deviation (RSD) values of Cu, Ni, As, Pb, Cd and Zn showed their anthropogenic origin while Mn, Fe, B and Cr were found with lower concentration that indicated their natural origin. Histograms and box-plots of Mn, Fe, B and Cr were found to be normally distributed while these parameters were appeared abnormal for Cu, Ni, As, Pb, Cd and Zn. Risk assessment was quantified by hazard quotient (HQ) and cancer risk for both adult and child. Non-carcinogenic risks as depicted by HQs of all the 10 metal(loid)s were below the recommended HQ threshold of 1 for both child and adult. However, highest HQ was calculated for B (child 0.300 and adult 0.338) followed by the values for Mn and Ni. The potential risks of combined effect of all the 10 metal(loid)s through ingestion of groundwater was assessed using HI and calculated to be 0.694 for adult and 0.566 for child. This indicates the potential health risk of these metal(loid)s to human due to the consumption of the groundwater of district Hyderabad for drinking purpose. Considering the geometric mean for the studied area, carcinogenic risk of As through oral intake was calculated i.e. 1.50 × 10-4 and 2.62 × 10-5 for the adult and child However, this carcinogenic risk is 1.91 × 10-5 and 3.28 × 10-6 for Cd in adult and child and 1.94 × 10-3 and 3.32 × 10-4 for Cr in adult and child, respectively. Since the cancer risk 6exceeded the target risk of 1 × 10-4 for Cr i.e. 1.94 × 10-3 in adult, it can thus be considered as 'non-acceptable'. Spatial maps of elements produced by ArcGIS showed the hotspots of potential hazardous elements such as highest concentration of elements like Zn, Pb and Cd was found in urban areas while highest concentration of Cu, Ni and As was observed near Phulleli canal which passes from Hyderabad City and may contain contamination from waste material of residential area due to their anthropogenic activities.
Asunto(s)
Agua Subterránea , Metales Pesados , Neoplasias , Adulto , Cadmio/análisis , Niño , Monitoreo del Ambiente , Humanos , Plomo/análisis , Metales Pesados/análisis , Pakistán , Medición de Riesgo , Análisis EspacialRESUMEN
2,4,6-Trichlorophenol (2,4,6 TCP) is one of the hazardous toxicants, which has severe impacts on the environment and human health. This study is designed to develop a highly sensitive and selective electrochemical sensor based on CuO nanostructures for the detection of 2,4,6 TCP. The CuO nanostructures were synthesized through an aqueous chemical growth method and characterized by versatile analytical techniques, for example, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, atomic force microscopy, energy-dispersive spectrometry, and X-ray diffraction. The characterization tools revealed a high crystalline nature, exceptional phase purity, nanoball morphology with an average size of around 18.7 nm for the CuO nanostructures. The synthesized material was used to modify a glassy carbon electrode (GCE) with the help of Nafion as a binder to improve its efficiency and sensitivity. The CuO/Nafion/GCE was proven to be a potential sensor for the determination of 2,4,6 TCP under optimized conditions at a scan rate of 70 mV/s, potential range of 0.1-1.0 V, and phosphate buffer of neutral pH as the supporting electrolyte. The linear range for 2,4,6 TCP was set from (1 to 120 µM) with a low limit of detection value calculated to be 0.046 µM. The developed sensor was effectively applied for water samples with acceptable recovery values from 95.9 to 100.6%.
RESUMEN
The extensive release of heavy metals into the natural water bodies has become globally prevalent from past few decades. Heavy metal toxicity is becoming a serious threat to human and the environment. Due to their prolonged half-life, potential accumulation in different parts of body, and non-biodegradability, metal ions are being obvious entities that can cause several hazardous health risks. A number of methods have been developed for the detection of heavy/toxic metals based on sensors. Among the various new technologies, chemical and optical nano sensors are emerging technology to detect toxic heavy metals. Several nano sensors have been developed using nano materials, synthesized from green or chemical methods. The nano sensors are convenient to prepare and provide enhanced limit of detection, limit of quantification, and onsite detection. This review covers the recent work reported from 2013 to 2019 for the detection of heavy metals using sensors based on nano materials synthesized by different routes. Graphical abstract.