RESUMEN
PURPOSE: To assess the robustness of prognostic biomarkers and molecular tumour subtypes developed for patients with head and neck squamous cell carcinoma (HNSCC) on cell-line derived HNSCC xenograft models, and to develop a novel biomarker signature by combining xenograft and patient datasets. MATERIALS AND METHODS: Mice bearing xenografts (nâ¯=â¯59) of ten HNSCC cell lines and a retrospective, multicentre patient cohort (nâ¯=â¯242) of the German Cancer Consortium-Radiation Oncology Group (DKTK-ROG) were included. All patients received postoperative radiochemotherapy (PORT-C). Gene expression analysis was conducted using GeneChip Human Transcriptome Arrays. Xenografts were stratified based on their molecular subtypes and previously established gene classifiers. The dose to control 50â¯% of tumours (TCD50) was compared between these groups. Using differential gene expression analyses combining xenograft and patient data, a gene signature was developed to define risk groups for the primary endpoint loco-regional control (LRC). RESULTS: Tumours of mesenchymal subtype were characterized by a higher TCD50 (xenografts, pâ¯<â¯0.001) and lower LRC (patients, pâ¯<â¯0.001) compared to the other subtypes. Similar to previously published patient data, hypoxia- and radioresistance-related gene signatures were associated with high TCD50 values. A 2-gene signature (FN1, SERPINE1) was developed that was prognostic for TCD50 (xenografts, pâ¯<â¯0.001) and for patient outcome in independent validation (LRC: pâ¯=â¯0.007). CONCLUSION: Genetic prognosticators of outcome for patients after PORT-C and subcutaneous xenografts after primary clinically relevant irradiation show similarity. The identified robust 2-gene signature may help to guide patient stratification, after prospective validation. Thus, xenografts remain a valuable resource for translational research towards the development of individualized radiotherapy.
Asunto(s)
Neoplasias de Cabeza y Cuello , Humanos , Animales , Ratones , Carcinoma de Células Escamosas de Cabeza y Cuello/genética , Carcinoma de Células Escamosas de Cabeza y Cuello/radioterapia , Xenoinjertos , Neoplasias de Cabeza y Cuello/genética , Neoplasias de Cabeza y Cuello/radioterapia , Estudios Retrospectivos , PronósticoRESUMEN
Malignant transformation of oral lichen planus (OLP) into oral squamous cell carcinoma is considered as one of the most serious complications of OLP. For the early detection of oral cancer in OLP follow-up, accurate localization of the OLP center is still difficult but often required for confirmatory biopsy with histopathological examination. Optical coherence tomography (OCT) offers the potential for more reliable biopsy sampling in the oral cavity as it is capable of non-invasively imaging the degenerated oral layer structure. In this case-series study with 15 patients, features of clinically classified forms of OLP in OCT cross-sections were registered and correlated with available histologic sections. Besides patients with reticular, atrophic, erosive and plaque-like OLP, two patients with leukoplakia were included for differentiation. The results show that OCT yields information about the epithelial surface, thickness and reflectivity, as well as the identifiability of the basement membrane and the vessel network, which could be used to complement the visual clinical appearance of OLP variants and allow a more accurate localization of the OLP center. This forms the basis for further studies on OCT-assisted non-invasive clinical classification of OLP, with the aim of enabling decision support for biopsy sampling in the future.
RESUMEN
BACKGROUND: Education of undergraduates in implant dentistry has been extended. In order to assess the correct implant position, the accuracy of implant insertion using templates for pilot-drill guided and full-guided implant insertion was examined in a laboratory set-up in a cohort of undergraduates. METHODS: After three-dimensional planning of the implant position in partially edentulous mandibular models, individual templates for the pilot-drill guided or full-guided implant insertion in the region of the first premolar were produced. A total of 108 dental implants were inserted. The results of the radiographic evaluation of the three-dimensional accuracy were statistically analyzed. Furthermore, the participants completed a questionnaire. RESULTS: The deviation of the three-dimensional angle of the implants inserted fully guided was 2.74 ± 1.49 degrees compared to 4.59 ± 2.70 degrees for pilot-drill guided. The difference was statistically significant (p < 0.01). The returned questionnaires revealed a high interest in oral implantology and a positive evaluation of the hands-on course. CONCLUSIONS: In this study, the undergraduates benefited from applying full-guided implant insertion considering the accuracy in this laboratory examination. However, the clinical effects are not clear as the differences are within a small range. Based on the returned questionnaires, the implementation of practical courses in the undergraduate curriculum should be encouraged.
Asunto(s)
Implantes Dentales , Cirugía Asistida por Computador , Humanos , Estudios Prospectivos , Estudiantes de Odontología , Cirugía Asistida por Computador/métodos , Prótesis e Implantes , Curriculum , Implantación Dental Endoósea , Diseño Asistido por Computadora , Tomografía Computarizada de Haz Cónico/métodosRESUMEN
(1) Background: Evaluation of impact of adjuvant radiation therapy (RT) in patients with oral squamous cell carcinoma of the oral cavity/oropharynx (OSCC) of up to 4 cm (pT1/pT2) and solitary ipsilateral lymph node metastasis (pN1). A non-irradiated group with clinical follow-up was chosen for control, and survival and quality of life (QL) were compared; (2) Methods: This prospective multicentric comprehensive cohort study included patients with resected OSCC (pT1/pT2, pN1, and cM0) who were allocated into adjuvant radiation therapy (RT) or observation. The primary endpoint was overall survival. Secondary endpoints were progression-free survival and QL after surgery; (3) Results: Out of 27 centers, 209 patients were enrolled with a median follow-up of 3.4 years. An amount of 137 patients were in the observation arm, and 72 received adjuvant irradiation. Overall survival did not differ between groups (hazard ratio (HR) 0.98 [0.55-1.73], p = 0.94). There were fewer neck metastases (HR 0.34 [0.15-0.77]; p = 0.01), as well as fewer local recurrences (HR 0.41 [0.19-0.89]; p = 0.02) under adjuvant RT. For QL, irradiated patients showed higher values for the symptom scale pain after 0.5, two, and three years (all p < 0.05). After six months and three years, irradiated patients reported higher symptom burdens (impaired swallowing, speech, as well as teeth-related problems (all p < 0.05)). Patients in the RT group had significantly more problems with mouth opening after six months, one, and two years (p < 0.05); (4) Conclusions: Adjuvant RT in patients with early SCC of the oral cavity and oropharynx does not seem to influence overall survival, but it positively affects progression-free survival. However, irradiated patients report a significantly decreased QL up to three years after therapy compared to the observation group.
RESUMEN
BACKGROUND: In reconstructive surgery, loss of a microvascular free flap due to perfusion disorders, especially thrombosis, is a serious complication. In recent years, viscoelastic testing (VET) has become increasingly important in point-of-care (POC) anticoagulation monitoring. This paper describes a protocol for enhanced anticoagulation monitoring during maxillofacial flap surgery. OBJECTIVE: The aim of the study will be to evaluate, in a controlled setting, the predictive value of POC devices for the type of flap perfusion disorders due to thrombosis or bleeding. VET, Platelet monitoring (PM) and standard laboratory tests (SLT) are comparatively examined. METHODS/DESIGN: This study is an investigator-initiated prospective trial in 100 patients undergoing maxillofacial surgery. Patients who undergo reconstructive surgery using microvascular-free flaps will be consecutively enrolled in the study. All patients provide blood samples for VET, PM and SLT at defined time points. The primary outcome is defined as free flap loss during the hospital stay. Statistical analyses will be performed using t-tests, including the Bonferroni adjustment for multiple comparisons. DISCUSSION: This study will help clarify whether VET can improve individualized patient care in reconstruction surgery. A better understanding of coagulation in relation to flap perfusion disorders may allow real-time adaption of antithrombotic strategies and potentially prevent flap complications.
RESUMEN
Objective: In many countries the access to high quality medical service depends on socioeconomic factors. Therefore, these factors are associated with the treatment and prognosis of many diseases. In Germany health care is claimed to be independent from such factors due to obligatory health insurance and a well-developed medical infrastructure. Thus, socioeconomically caused health disparities should be absent. The aim of this study was to analyze the association between socioeconomic factors and the survival of oral cavity cancer in Germany. Patients and methods: In this descriptive cohort study socioeconomic status related factors as well as demographic, tumor-specific, and comorbidity factors of 500 patients treated for oral cavity cancer were obtained in the university hospital of Dresden. Pearson correlation was used to describe associations between continuous variables. Associations between categorical variables were assessed using the chi-square test. Overall and recurrence-free survival were studied using the Kaplan-Meier method. Log-rank test was carried out to test between-group differences. Cox proportional hazard models were used to estimate the risk of death and the risk of recurrence. Results: Significant differences in overall survival were found between the different educational levels and sex. Seventy-nine percent of the patients did not have a university degree or master craftsman/craftswoman. Less discrepancy was observed according to the marital status (49.4% married/engaged vs. 47.8% single, divorced, or widowed). In the multivariable analysis only sex, age at diagnosis, the Charlson score, the number of positive lymph nodes, and the nodal status were identified as independent predictors for overall survival whereas sex and the age at diagnosis were identified as independent predictors for recurrence-free survival. Conclusion: Despite the equitable health system in Germany, significant associations between overall survival of oral cavity cancer and different socioeconomic factors could be found. For elimination of these disparities, health education programs should be established in socially deprived areas. Furthermore, clinicians should keep these factors in mind when determining recall periods for dental check-ups.
Asunto(s)
Boca , Neoplasias , Estudios de Cohortes , Alemania/epidemiología , Humanos , Estimación de Kaplan-Meier , Factores SocioeconómicosRESUMEN
PURPOSE: We tested the hypothesis that gene expressions from biopsies of locally advanced head and neck squamous cell carcinoma (HNSCC) patients can supplement dose-volume parameters to predict dysphagia and xerostomia following primary radiochemotherapy (RCTx). MATERIAL AND METHODS: A panel of 178 genes previously related to radiochemosensitivity of HNSCC was considered for nanoString analysis based on tumour biopsies of 90 patients with locally advanced HNSCC treated by primary RCTx. Dose-volume parameters were extracted from the parotid, submandibular glands, oral cavity, larynx, buccal mucosa, and lips. Normal tissue complication probability (NTCP) models were developed for acute, late, and for the improvement of xerostomia grade ≥2 and dysphagia grade ≥3 using a cross-validation-based least absolute shrinkage and selection operator (LASSO) approach combined with stepwise logistic regression for feature selection. The final signatures were included in a logistic regression model with optimism correction. Performance was assessed by the area under the receiver operating characteristic curve (AUC). RESULTS: NTCP models for acute and late xerostomia and the improvement of dysphagia resulted in optimism-corrected AUC values of 0.84, 0.76, and 0.70, respectively. The minimum dose to the contralateral parotid was selected for both acute and late xerostomia and the minimum dose to the larynx was selected for dysphagia improvement. For the xerostomia endpoints, the following gene expressions were selected: RPA2 (cellular response to DNA damage), TCF3 (salivary gland cells development), GBE1 (glycogen storage and regulation), and MAPK3 (regulation of cellular processes). No gene expression features were selected for the prediction of dysphagia. CONCLUSION: This hypothesis-generating study showed the potential of improving NTCP models using gene expression data for HNSCC patients. The presented models require independent validation before potential application in clinical practice.
Asunto(s)
Carcinoma de Células Escamosas , Trastornos de Deglución , Neoplasias de Cabeza y Cuello , Radioterapia de Intensidad Modulada , Xerostomía , Carcinoma de Células Escamosas/genética , Carcinoma de Células Escamosas/terapia , Quimioradioterapia/efectos adversos , Quimioradioterapia/métodos , Trastornos de Deglución/genética , Expresión Génica , Neoplasias de Cabeza y Cuello/complicaciones , Neoplasias de Cabeza y Cuello/genética , Neoplasias de Cabeza y Cuello/terapia , Humanos , Glándula Parótida , Radioterapia de Intensidad Modulada/métodos , Carcinoma de Células Escamosas de Cabeza y Cuello/complicaciones , Carcinoma de Células Escamosas de Cabeza y Cuello/genética , Carcinoma de Células Escamosas de Cabeza y Cuello/terapia , Xerostomía/genéticaRESUMEN
(1) Background: Patients with locally advanced head and neck squamous cell carcinoma (HNSCC) who are biologically at high risk for the development of loco−regional recurrences after postoperative radiotherapy (PORT) but at intermediate risk according to clinical risk factors may benefit from additional concurrent chemotherapy. In this matched-pair study, we aimed to identify a corresponding predictive gene signature. (2) Methods: Gene expression analysis was performed on a multicenter retrospective cohort of 221 patients that were treated with postoperative radiochemotherapy (PORT-C) and 283 patients who were treated with PORT alone. Propensity score analysis was used to identify matched patient pairs from both cohorts. From differential gene expression analysis and Cox regression, a predictive gene signature was identified. (3) Results: 108 matched patient pairs were selected. We identified a 2-metagene signature that stratified patients into risk groups in both cohorts. The comparison of the high-risk patients between the two types of treatment showed higher loco−regional control (LRC) after treatment with PORT-C (p < 0.001), which was confirmed by a significant interaction term in Cox regression (p = 0.027), i.e., the 2-metagene signature was indicative for the type of treatment. (4) Conclusion: We have identified a novel gene signature that may be helpful to identify patients with high-risk HNSCC amongst those at intermediate clinical risk treated with PORT, who may benefit from additional concurrent chemotherapy.
RESUMEN
Purpose: In cases of severe atrophic maxilla or maxillary involution, augmentation is necessary for implant-supported prosthetics. Using bone grafts is a standard procedure, and using customized allogeneic bone blocks may be a predictable alternative before dental implantation. Clinical Findings. This case study shows the digital workflow, including a preimplantological augmentation by a customized allogeneic block, followed by soft tissue optimization and template-based dental implantation, after six months of healing. It is part of a three-year follow-up study on the resorption rate of allogeneic bone blocks. Outcomes. Allogeneic bone augmentation is an alternative treatment option to autologous bone grafts. It allows predictable advanced backward planning (ABP) even in the maxillary esthetic zone. Diameter-reduced implants show long-term stability of a minimum of three years after loading and excellent results of prosthetic fixtures. Conclusion: Prefabricated customized allogeneic blocks for augmentation may increase the fitting accuracy of the graft, decrease morbidity, and reduce the operation time in esthetic maxillary rehabilitation.
RESUMEN
PURPOSE: The aim of this study was to develop and validate a novel gene signature from full-transcriptome data using machine-learning approaches to predict loco-regional control (LRC) of patients with human papilloma virus (HPV)-negative locally advanced head and neck squamous cell carcinoma (HNSCC), who received postoperative radio(chemo)therapy (PORT-C). MATERIALS AND METHODS: Gene expression analysis was performed using Affymetrix GeneChip Human Transcriptome Array 2.0 on a multicentre retrospective training cohort of 128 patients and an independent validation cohort of 114 patients from the German Cancer Consortium - Radiation Oncology Group (DKTK-ROG). Genes were filtered based on differential gene expression analyses and Cox regression. The identified gene signature was combined with clinical parameters and with previously identified genes related to stem cells and hypoxia. Technical validation was performed using nanoString technology. RESULTS: We identified a 6-gene signature consisting of four individual genes CAV1, GPX8, IGLV3-25, TGFBI, and one metagene combining the highly correlated genes INHBA and SERPINE1. This signature was prognostic for LRC on the training data (ci = 0.84) and in validation (ci = 0.63) with a significant patient stratification into two risk groups (p = 0.005). Combining the 6-gene signature with the clinical parameters T stage and tumour localisation as well as the cancer stem cell marker CD44 and the 15-gene hypoxia-associated signature improved the validation performance (ci = 0.69, p = 0.001). CONCLUSION: We have developed and validated a novel prognostic 6-gene signature for LRC of HNSCC patients with HPV-negative tumours treated by PORT-C. After successful prospective validation the signature can be part of clinical trials on the individualization of radiotherapy.
Asunto(s)
Quimioradioterapia Adyuvante , Neoplasias de Cabeza y Cuello , Carcinoma de Células Escamosas de Cabeza y Cuello , Biomarcadores de Tumor/metabolismo , Quimioradioterapia/métodos , Quimioradioterapia Adyuvante/métodos , Perfilación de la Expresión Génica , Neoplasias de Cabeza y Cuello/etiología , Neoplasias de Cabeza y Cuello/genética , Neoplasias de Cabeza y Cuello/patología , Neoplasias de Cabeza y Cuello/terapia , Humanos , Hipoxia , Aprendizaje Automático , Infecciones por Papillomavirus/complicaciones , Peroxidasas , Pronóstico , Estudios Retrospectivos , Medición de Riesgo , Carcinoma de Células Escamosas de Cabeza y Cuello/etiología , Carcinoma de Células Escamosas de Cabeza y Cuello/genética , Carcinoma de Células Escamosas de Cabeza y Cuello/patología , Carcinoma de Células Escamosas de Cabeza y Cuello/terapia , Procedimientos Quirúrgicos OperativosRESUMEN
PURPOSE: To assess the relation of the previously reported classification of molecular subtypes to the outcome of patients with HNSCC treated with postoperative radio(chemo)therapy (PORT-C), and to assess the association of these subtypes with gene expressions reflecting known mechanisms of radioresistance. MATERIAL AND METHODS: Gene expression analyses were performed using the GeneChip Human Transcriptome Array 2.0 on a multicentre retrospective patient cohort (N = 128) of the German Cancer Consortium Radiation Oncology Group (DKTK-ROG) with locally advanced HNSCC treated with PORT-C. Tumours were assigned to four molecular subtypes, and correlation analyses between subtypes and clinical risk factors were performed. In addition, the classifications of eight genes or gene signatures related to mechanisms of radioresistance, which have previously shown an association with outcome of patients with HNSCC, were compared between the molecular subtypes. The endpoints loco-regional control (LRC) and overall survival (OS) were evaluated by log-rank tests and Cox regression. RESULTS: Tumours were classified into the four subtypes basal (19.5%), mesenchymal (18.8%), atypical (15.6%) and classical (14.1%). The remaining tumours could not be classified (32.0%). Tumours of the mesenchymal subtype showed a lower LRC compared to the other subtypes (p = 0.012). These tumours were associated with increased epithelial-mesenchymal transition (EMT) and overexpression of a gene signature enriched in DNA repair genes. The majority of the eight considered gene classifiers were significantly associated to LRC or OS in the whole cohort. CONCLUSION: Molecular subtypes, previously identified on HNSCC patients treated with primary radio(chemo)therapy or surgery, were related to LRC for patients treated with PORT-C, where mesenchymal tumours presented with worse prognosis. After prospective validation, subtype-based patient stratification, potentially in combination with other molecular classifiers, may be considered in future interventional studies in the context of personalised radiotherapy and may guide the development of combined treatment approaches.
Asunto(s)
Neoplasias de Cabeza y Cuello , Infecciones por Papillomavirus , Quimioradioterapia , Humanos , Pronóstico , Estudios Retrospectivos , Carcinoma de Células Escamosas de Cabeza y Cuello/genética , Carcinoma de Células Escamosas de Cabeza y Cuello/terapiaRESUMEN
This study presents a highly miniaturized, handheld probe developed for rapid assessment of soft tissue using optical coherencetomography (OCT). OCT is a non-invasive optical technology capable of visualizing the sub-surface structural changes that occur in soft tissue disease such as oral lichen planus. However, usage of OCT in the oral cavity has been limited, as the requirements for high-quality optical scanning have often resulted in probes that are heavy, unwieldy and clinically impractical. In this paper, we present a novel probe that combines an all-fiber optical design with a light-weight magnetic scanning mechanism to provide easy access to the oral cavity. The resulting probe is approximately the size of a pen (10 mm × 140 mm) and weighs only 10 grams. To demonstrate the feasibility and high image quality achieved with the probe, imaging was performed on the buccal mucosa and alveolar mucosa during routine clinical assessment of six patients diagnosed with oral lichen planus. Results show the loss of normal tissue structure within the lesion, and contrast this with the clear delineation of tissue layers in adjacent inconspicuous regions. The results also demonstrate the ability of the probe to acquire a three-dimensional data volume by manually sweeping across the surface of the mucosa. The findings of this study show the feasibility of using a small, lightweight probe to identify pathological features in oral soft tissue.
Asunto(s)
Liquen Plano Oral , Tomografía de Coherencia Óptica , Diseño de Equipo , Tecnología de Fibra Óptica , Humanos , Tomografía de Coherencia Óptica/métodosRESUMEN
In the case of maxillary involution, augmentation is necessary for implant-supported prosthetics. The use of bone grafts is standard; customized allogeneic bone blocks may be a predictable alternative before dental implantation. For maxillary full-arch reconstruction, this case shows a horse-shoe augmentation by four allogeneic blocks, followed by guided dental implantation and fixed prosthetics after 6 months of healing. Using allogeneic blocks is an option for full-arch maxillary augmentation and comparable with autologous bone grafts. There is no donor site comorbidity. Bone height is stable for a minimum of 3 years after loading with resorption less than 10% in vertical, buccolingual, and mesiodistal directions. Short-implants allow for the long-term stability of prosthetic fixtures. Prefabricated customized allogeneic blocks for augmentation may increase the fitting accuracy of the graft, decrease morbidity, and lower operation time in maxillary full-arch reconstruction. The percentage of resorption after 3 years is comparable to the commonly used iliac crest.
Asunto(s)
Aumento de la Cresta Alveolar , Implantes Dentales , Trasplante de Células Madre Hematopoyéticas , Trasplante Óseo , Implantación Dental , Implantación Dental Endoósea , Estudios de Seguimiento , Maxilar/cirugíaRESUMEN
Periapical cemental dysplasia (PCD) is considered a non-neoplastic proliferation of fibrous tissues and cementum-like hard tissues, usually occurring in the periapical regions of teeth. PCD is characterized by the presence of vital pulp and is often accidentally discovered during a general radiographic survey. PCD may arise from the tissue of odontogenic origin or occur as a reactive process in the periapical tissue. Multilocular occurrences in both jaws are rare. However, we encountered a case of multiple PCDs by orthopantomography, which showed different degrees of maturation in the mandible and maxilla by osteodensitometric detection via cone-beam computed tomography (CB-CT) validated by Tc-99m bone-scintigraphy (BS). Biopsies confirmed the radiological results. CB-CT osteodensitometry allows for the categorization and assessment of different stages of PCD maturation from beginning to florid, detection of remittent osseous changes, and evaluation in the clinical follow-up. When using the local cortical bone as a reference value of 100%, periapical dysplasias show density values of 75% in the mandible and 80% in the maxilla. Early classification of PCD is possible with CB-CT osteodensitometry.
RESUMEN
PURPOSE: Schizodontism is complete separation of a dental germ. It results in a twin tooth and supernumerary teeth. The treatment of transverse constriction in combination with supernumerary dental germs and impacted central incisors can pose a challenge, especially in young patients, when the number of permanent teeth is not adequate to ensure secure anchorage. The use of navigation templates based on three-dimensional X-ray images allows for precise insertion of temporary mini-implants for the acquisition of palatal distractors. In addition, templates allow for minimally invasive biopsies and osteotomies. METHODS: The treatment of schizodontism, dentitio tarda, and transverse constriction is to be assessed as an interdisciplinary method by using mini-screw-assisted devices. Minimized osteotomy of impacted supernumerary teeth or dental implantation can be carried out in a one-step-procedure based on digital preplanning and prefabrication of orthodontic devices. RESULTS: Multifunctional templates allow for early planning, preoperative fabrication, and intraoral fixation of orthodontic appliances. In the case of an adolescent patient, a sustainable, interdisciplinary treatment concept could be demonstrated that shows age-appropriate gnathological development and stable growth conditions over a follow-up period of 10 years. CONCLUSION: One can likely assume that multifunctional templates allow for minimally invasive one-step surgeries as an interdisciplinary tool between orofacial surgery and modern orthodontics.
RESUMEN
The knowledge of root canal curvature is crucial regarding the prevention of ledge formation, root perforation and the possibility of endodontic instruments' fracture during endodontic treatments. Therefore, a quantification method of the root canal curvature as well as the applicability of diagnostically relevant tomographic three-dimensional (3D) imaging data is necessary. Hereby, cone-beam computed tomography (CBCT) images and micro-computed tomography (µCT) data of distal root canals were analysed concerning the continuous three-dimensional curvature of human mandibular molars ( n = 50). The curvature of the canal's three-dimensional centre line was determined by evaluating the tomographic images. The centroids of each root canal slice were identified and approximated by spline curves to obtain the centre line and therefore, its curvature. Comparing the results evaluated from CBCT and µCT images, minimum radii of curvature of 2.6 mm and 2.1 mm were determined, respectively. The observation of the centre line demonstrated the requirement of the three-dimensional imaging data from CBCT and µCT for a reliable curvature analysis. Conclusively, the evaluation of CBCT and µCT images results in comparable radii of curvature. Thus, the application of the introduced method in combination with CBCT applied to patient cases could offer an important preliminary diagnostical step to prevent endodontic treatment complications.
RESUMEN
BACKGROUND: Intraosseous anesthesia (IO) allows the anesthetic solution to be injected directly into the cancellous bone. The anesthetic solution immediately reaches the periapical region, and thus the axonal area of the nerve, where it can temporarily disable the sodium pump. The effect is felt almost without any time delay, and only a small amount of anesthetic solution is required. METHODS: This study aims to investigate the efficacy of IO using the Anesto® device after infiltration anesthesia (IA) and/or inferior alveolar nerve block anesthesia (IANB) failed to work in symptomatic irreversible pulpitis (hot tooth). The 33 patients included in the study were treated additionally with 1.7 ml articaine hydrochloride with 1:100,000 epinephrine hydrochloride (Ultracain® D-S, Sanofi-Aventis, Frankfurt, Germany) IO. RESULTS: The electrical pulp test showed that 95.76% of the volunteers reacted positively to the combination of IANB or IA with the IO. In women, the additive IO was effective at 97.22%. In men, the IO led to pain elimination in 94.00% of cases. The duration of the IO was less than a quarter of an hour (13.03 min). The IO worked longer in women than in men (13.61 min vs. 12.33 min). Overall, more than every third tooth that needed trepanation was located in the posterior area of the mandible (36.4%). Treatment of hot teeth in this area was associated with an increased pulse rate and increased residual pain. There was a moderate correlation (Spearman-Rho [IRI] = 0.280) between the Visual Analog Scale (VAS) score and bone density, and a significant correlation (IRI = 0.612) between subjective residual pain and bone width. The IO resulted in a moderate, transient increase in the pulse rate by approximately 20 bpm. This is similar to the temporary increase in heart rate after conventional anesthesia techniques in non-preloaded patients and can be considered clinically irrelevant. CONCLUSION: IO with the Anesto® device as an extension and deepening of local pain elimination is recommended for the treatment of hot teeth.
RESUMEN
BACKGROUND: As a growing field in dentistry, the practical education during the undergraduate curriculum in implant dentistry should be extended. Not only the theoretical background but also practical skills are crucial to place implants in patients. In order to determine the exact implant position, several positioning aids are available. In the present laboratory study, the accuracy of implant insertion using two different guiding modes in a group of inexperienced participants was assessed. METHODS: After three-dimensional planning using the data of a cone beam computed tomography of artificial mandibles, surgical templates were manufactured by thermoforming. In region 35, a sleeve for the pilot drill was used, whereas in region 45, a sleeve allowing a full-guided implant insertion was inserted. Subsequently, a total of 104 implants were placed by 52 undergraduates. Radiographical assessment of the three-dimensional accuracy was performed. Furthermore, the time required to insert the implants was recorded. Statistical analysis followed. DISCUSSION: When comparing the three-dimensional accuracy of the virtually planned to the actual inserted implant, a statistically significantly higher accuracy in three-dimensional angulation was achieved for the full-guided (3.388 ± 1.647°) compared to the pilot-drill guided mode (5.792 ± 3.290°). Furthermore, the time required to insert the implant was shorter for the full-guided template (6.23 ± 1.78 min) vs. for the pilot-drill guided (8.84 ± 2.39 min). Both differences reached a statistical significance (p < 0.001). CONCLUSION: Within the limit of this laboratory study, the results suggest that inexperienced surgeons benefit from a full-guided implant insertion. However, the clinical effects have to be discussed as the mismatch was varying in the decimillimeter range.
RESUMEN
PURPOSE: The aim of the present study was to evaluate the biomechanical stability of osteosynthesis in mandibular condyle fractures using a newly designed rhombic 3-dimensional (3D) condylar fracture plate and compare it with that using standard two 4-hole miniplates and with that in nonfractured condyles. MATERIALS AND METHODS: Using 200 porcine mandibles, 3 different monocortical plating techniques were evaluated. The condyles were fractured along a defined line tangentially through the sigmoid notch and perpendicular to the posterior border. After anatomic reduction, osteosynthesis was performed using either standard rhombic 3D condylar fracture plates and standard screws (group A) or locking rhombic 3D condylar fracture plates, which were fixed either with standard screws (group B) or locking screws (group C). For comparison, nonfractured condyles (group D) and condyles fixed with standard two 4-hole miniplates and 8 screws (group E) were included. Using a universal mechanical testing machine (TIRA Test 2720; TIRA GmbH Schalkau, Germany), each group was subjected to linear loading from laterally to medially, medially to laterally, anteriorly to posteriorly, and posteriorly to anteriorly. The maximum axial force and displacement at the maximum force were measured. The mean values were compared for statistical significance using analysis of variance with Bonferroni's correction (statistical significance set at P < .05). RESULTS: The main mode of failure in the plating techniques investigated was the pull out of screws from the proximal fragment. We found no statistically significant differences in the stability of osteosynthesis between the two 4-hole miniplates and the rhombic 3D condylar fracture plate when loading from posteriorly to anteriorly, laterally to medially, and medially to laterally. However, when loading from anteriorly to posteriorly, a statistically significant difference between the standard and locking system and the two 4-hole miniplate system was observed, with the latter proving more stable. CONCLUSIONS: The results of the present biomechanical study suggest that the rhombic 3D condylar fracture plates are suitable for the treatment of condylar neck fractures. Both types of the plate are able to resist physiologic strains comparable to the two 4-hole miniplates.
Asunto(s)
Fijación Interna de Fracturas , Cóndilo Mandibular , Fracturas Mandibulares , Animales , Fenómenos Biomecánicos , Placas Óseas , Alemania , Cóndilo Mandibular/lesiones , Fracturas Mandibulares/cirugía , PorcinosRESUMEN
Implant dentistry is a growing field in the education of undergraduate dental students. The present laboratory study evaluates factors which may potentially influence the accuracy of free-hand implant insertion and the use of an orientation template. After three-dimensional planning using coDiagnostiXTM, orientation templates, including sleeves for the pilot-drill in regions 41 and 45, were manufactured by thermoforming. Sixty-one fifth year dental students inserted one implant using the orientation template and another implant free-hand in an artificial mandible. Information regarding age, sex, handedness, education, and the time required for implant insertion were recorded. Subsequently, the mandibles were scanned using cone-beam-computed tomography and the accuracy of the implant position was assessed, while statistical analysis followed. The free-hand implant insertion resulted in a distal deviation of -1.34 ± 5.15° and a mesial mismatch of 0.06 ± 0.79 mm at the artificial bone level compared to the sleeves. When using the orientation templates, the deviation decreased to -0.67 ± 3.48° and a distal mismatch of -0.22 ± 0.62 mm was achieved. The difference was statistically significant for the mismatch (p < 0.049). Regarding the limitations of our study, it could be said that the accuracy level achieved by dental undergraduates using implant placement with orientation templates is comparable to that in other studies.