RESUMEN
Producing backbone degradable copolymers via free-radical copolymerization is a promising, yet challenging method to develop more sustainable materials for many applications. In this work, we present the copolymerization of 2-methylen-1,3-dioxepane (MDO) with crotonic acid derivative esters. MDO can copolymerize by radical ring-opening polymerization incorporating degradable ester moieties in the polymer backbone, although this can often be difficult due to the very unfavorable reactivity ratios. Crotonic acid derivatives, on the other hand, can be easily produced completely from biomass but are typically very difficult to (co)polymerize due to low propagation rates and very unfavorable reactivity ratios. Herein, we present the surprisingly easy copolymerization between MDO and butyl crotonate (BCr), which shows the ability to form alternating copolymers. The alternating nature of the copolymer was characterized by MALDI-TOF and supported by the reactivity ratios calculated experimentally (rMDO = 0.105 and rBCr = 0.017). The alternating nature of the copolymers favored the degradability that could be achieved under basic conditions (in 2 h, all chains have molar masses smaller than 2 kg/mol). Last, the work was expanded to other crotonate monomers to expand the portfolio and show the potential of this copolymer family.
RESUMEN
Particle size and particle size distribution (PSD) are important properties of polymer latexes because they strongly affect the film formation and the rheological properties of the latexes. Thus, monitoring the particle size is of paramount importance during the production of waterborne polymeric dispersions, for which online/inline measurements of the particle size are required. Herein, turbidity spectroscopy (TUS) is used to measure the particle size of nanoparticles in dispersed media. Calibration curves based on a modified wavelength exponent method are introduced and assessed to monitor the evolution of a broad range of particle sizes in seeded semibatch emulsion polymerizations of methyl methacrylate, butyl acrylate, methacrylic acid (MMA/BA/MAA 51/47/2) terpolymers. It is shown that the wavelength exponent based calibration curves can be successfully used to retrieve the particle size during the polymerization process.
RESUMEN
Polymer colloids are complex materials that have the potential to be used in a vast array of applications. One of the main reasons for their continued growth in commercial use is the water-based emulsion polymerization process through which they are generally synthesized. This technique is not only highly efficient from an industrial point of view but also extremely versatile and permits the large-scale production of colloidal particles with controllable properties. In this perspective, we seek to highlight the central challenges in the synthesis and use of polymer colloids, with respect to both existing and emerging applications. We first address the challenges in the current production and application of polymer colloids, with a particular focus on the transition toward sustainable feedstocks and reduced environmental impact in their primary commercial applications. Later, we highlight the features that allow novel polymer colloids to be designed and applied in emerging application areas. Finally, we present recent approaches that have used the unique colloidal nature in unconventional processing techniques.
RESUMEN
Encapsulation technology comprises enclosing active agents (core materials) within a homogeneous/heterogeneous matrix (wall material) at the micro/nano scale [...].
RESUMEN
Lactide-valerolactone copolymers have potential application in the packaging sector. Different copolymers were synthesized, and the kinetics of the copolymerization reactions and the microstructure of the copolymers were analysed. Lactide showed higher reactivity than valerolactone which leads to composition drift through the reaction. Thermal, mechanical and barrier properties of the selected copolymers were studied. Overall, the incorporation of valerolactone results in copolymers with higher ductility than poly(lactide) with intermediate water and oxygen permeability which makes these materials appropriate candidates for use in the packaging sector.
RESUMEN
An event-driven approach based on dynamic optimization and nonlinear model predictive control (NMPC) is investigated together with inline Raman spectroscopy for process monitoring and control. The benefits and challenges in polymerization and morphology monitoring are presented, and an overview of the used mechanistic models and the details of the dynamic optimization and NMPC approach to achieve the relevant process objectives are provided. Finally, the implementation of the approach is discussed, and results from experiments in lab and pilot-plant reactors are presented.
RESUMEN
In a recent publication, Nakamura and co-workers studied the termination mechanism in the radical polymerization of acrylates. Contrary to conventional thinking, their conclusion is that termination is overwhelmingly by disproportionation. This finding impacts on a large body of the previous work in the polymerization of acrylic monomers which this work seeks to address. Analysis of the molecular weight distribution of acrylic polymers obtained under different polymerization conditions shows that termination by combination is the more probable mechanism for mutual termination of secondary radicals. It is proposed that in the experiments conducted by Nakamura and co-workers, backbiting plays a key role and their experimental data are reinterpreted, showing that they are more revealing with respect to the mode of termination of the midchain radical produced by backbiting, than to bimolecular termination of secondary radicals.
