Response surface methodology mediated optimization of phytosulfokine and plant growth regulators for enhanced protoplast division, callus induction, and somatic embryogenesis in Angelica Gigas Nakai.

BACKGROUND: Angelica Gigas (Purple parsnip) is an important medicinal plant that is cultivated and utilized in Korea, Japan, and China. It contains bioactive substances especially coumarins with anti-inflammatory, anti-platelet aggregation, anti-cancer, anti-diabetic, antimicrobial, anti-obesity, anti-oxidant, immunomodulatory, and neuroprotective properties. This medicinal crop can be genetically improved, and the metabolites can be obtained by embryonic stem cells. In this context, we established the protoplast-to-plant regeneration methodology in Angelica gigas. RESULTS: In the present investigation, we isolated the protoplast from the embryogenic callus by applying methods that we have developed earlier and established protoplast cultures using Murashige and Skoog (MS) liquid medium and by embedding the protoplast in thin alginate layer (TAL) methods. We supplemented the culture medium with growth regulators namely 2,4-dichlorophenoxyaceticacid (2,4-D, 0, 0.75, 1.5 mg L- 1), kinetin (KN, 0, 0.5, and 1.0 mg L- 1) and phytosulfokine (PSK, 0, 50, 100 nM) to induce protoplast division, microcolony formation, and embryogenic callus regeneration. We applied central composite design (CCD) and response surface methodology (RSM) for the optimization of 2,4-D, KN, and PSK levels during protoplast division, micro-callus formation, and induction of embryogenic callus stages. The results revealed that 0.04 mg L- 1 2,4-D + 0.5 mg L- 1 KN + 2 nM PSK, 0.5 mg L- 1 2,4-D + 0.9 mg L- 1 KN and 90 nM PSK, and 1.5 mg L- 1 2,4-D and 1 mg L- 1 KN were optimum for protoplast division, micro-callus formation and induction embryogenic callus. MS basal semi-solid medium without growth regulators was good for the development of embryos and plant regeneration. CONCLUSIONS: This study demonstrated successful protoplast culture, protoplast division, micro-callus formation, induction embryogenic callus, somatic embryogenesis, and plant regeneration in A. gigas. The methodologies developed here are quite useful for the genetic improvement of this important medicinal plant.

Production of Secondary Metabolites from Cell Cultures of Sageretia thea (Osbeck) M.C. Johnst. Using Balloon-Type Bubble Bioreactors.

Sageretia thea is used in the preparation of herbal medicine in China and Korea; this plant is rich in various bioactive compounds, including phenolics and flavonoids. The objective of the current study was to enhance the production of phenolic compounds in plant cell suspension cultures of Sageretia thea. Optimum callus was induced from cotyledon explants on MS medium containing 2,4-dichlorophenoxyacetic acid (2,4-D; 0.5 mg L-1), naphthalene acetic acid (NAA, 0.5 mg L-1), kinetin (KN; 0.1 mg L-1) and sucrose (30 g L-1). Browning of callus was successfully avoided by using 200 mg L-1 ascorbic acid in the callus cultures. The elicitor effect of methyl jasmonate (MeJA), salicylic acid (SA), and sodium nitroprusside (SNP) was studied in cell suspension cultures, and the addition of 200 µM MeJA was found suitable for elicitation of phenolic accumulation in the cultured cells. Phenolic and flavonoid content and antioxidant activity were determined using 2,2 Diphenyl 1 picrylhydrazyl (DPPH), 2,2'-azino-bis (3-ethybenzothiazoline-6-sulphonic acid (ABTS), ferric reducing antioxidant power (FRAP) assays and results showed that cell cultures possessed highest phenolic and flavonoid content as well as highest DPPH, ABTS, and FRAP activities. Cell suspension cultures were established using 5 L capacity balloon-type bubble bioreactors using 2 L of MS medium 30 g L-1 sucrose and 0.5 mg L-1 2,4-D, 0.5 mg L-1 NAA, and 0.1 mg L-1 KN. The optimum yield of 230.81 g of fresh biomass and 16.48 g of dry biomass was evident after four weeks of cultures. High-pressure liquid chromatography (HPLC) analysis showed the cell biomass produced in bioreactors possessed higher concentrations of catechin hydrate, chlorogenic acid, naringenin, and other phenolic compounds.

Response of Cnidium officinale Makino Plants to Heat Stress and Selection of Superior Clones Using Morphological and Molecular Analysis.

Cnidium officinale is a medicinal plant cultivated for its rhizomes, which are used in Chinese, Japanese, and Korean traditional medicine. This medicinal crop is highly susceptible to heat stress and cannot be cultivated in regions of higher temperatures. In the present study, ten clones from Korea (clones 1, 2, 5, 6, 8, 11, 14, 15, 22, and 26) were evaluated for their heat tolerance in vitro at 25, 30, 32.5, and 35 °C, and growth characteristics including plant height, the number of leaves and roots were evaluated. The initial experiment was conducted to find the threshold level for significant damage to the plant, while the second experiment was to screen the germplasm to select heat-tolerant clones. Most of the clones were sensitive to heat stress (clones 1, 2, 8, 11, 14, 15, 22, and 26), and few clones (clones 5 and 6) could perform well at an elevated temperature of 32.5 °C. Molecular analysis of the expression of heat-responsive genes, including heat shock protein (CoHSP), catalase (CoCAT), and cystine protease (CoCP), was performed by quantitative real-time reverse transcriptase polymerase chain reaction (qRT-PCR) carried out with heat-tolerant and heat-sensitive clones. Two of the heat-tolerant clones (clones 5 and 6) showed significant expression of CoHSP and CoCAT genes at elevated temperature treatment. These clones can be used for further evaluation and cultivation.

Embryogenic Stem Cell Identity after Protoplast Isolation from Daucus carota and Recovery of Regeneration Ability through Protoplast Culture.

Protoplasts are single cells isolated from tissues or organs and are considered a suitable system for cell studies in plants. Embryogenic cells are totipotent stem cells, but their regeneration ability decreases or becomes lost altogether with extension of the culture period. In this study, we isolated and cultured EC-derived protoplasts (EC-pts) from carrots and compared them with non-EC-derived protoplasts (NEC-pts) with respect to their totipotency. The protoplast isolation conditions were optimized, and the EC-pts and NEC-pts were characterized by their cell size and types. Both types of protoplasts were then embedded using the alginate layer (TAL) method, and the resulting EC-pt-TALs and NEC-pt-TALs were cultured for further regeneration. The expression of the EC-specific genes SERK1, WUS, BBM, LEC1, and DRN was analyzed to confirm whether EC identity was maintained after protoplast isolation. The protoplast isolation efficiency for EC-pts was 2.4-fold higher than for NEC-pts (3.5 × 106 protoplasts·g−1 FW). In the EC-pt group, protoplasts < 20 µm accounted for 58% of the total protoplasts, whereas in the NEC-pt group, small protoplasts accounted for only 26%. In protoplast culture, the number of protoplasts that divided was 2.6-fold higher for EC-pts than for NEC-pts (7.7 × 104 protoplasts·g−1 FW), with a high number of plants regenerated for EC-pt-TALs, whereas no plants were induced by NEC-pt-TAL. Five times more plants were regenerated from EC-pts than from ECs. Regarding the expression of EC-specific genes, WUS and SERK1 expression increased 12-fold, and LEC1 and BBM expression increased 3.6−6.4-fold in isolated protoplasts compared with ECs prior to protoplast isolation (control). These results reveal that the protoplast isolation process did not affect the embryogenic cell identity; rather, it increased the plant regeneration rate, confirming that EC-derived protoplast culture may be an efficient system for increasing the regeneration ability of old EC cultures through the elimination of old and inactivate cells. EC-derived protoplasts may also represent an efficient single-cell system for application in new breeding technologies such as genome editing.

Establishment of an Efficient In Vitro Propagation of Cnidium officinale Makino and Selection of Superior Clones through Flow Cytometric Assessment of DNA Content.

Cnidium officinale is a valuable medicinal plant cultivated in Asia for its rhizomes. This study reports the in vitro regeneration of Cnidium officinale plants and the induction of rhizomes from microshoots. The rhizomatous buds of Cnidium officinale induced multiple shoots on Murashige and Skoog (MS) medium supplemented with 0.5 mg L-1 BA, which led to the regeneration of plants within four weeks of culture. After four weeks of culture, the plants were assessed for fresh weight, the number of leaves, the number of roots, and the length of roots to compare the performance of the different clones. The clones with good growth characteristics were selected with the aid of a flow cytometric analysis of 2C nuclear DNA content. The plants bearing high DNA values showed better growth characteristics. Various factors, namely, sucrose concentration (30, 50, 70, and 90 g L-1), ABA (0, 0.5, 1.0, and 2.0 mg L-1), the synergistic effects of BA (1.0 mg L-1) + NAA (0.5 mg L-1) and BA (1.0 mg L-1) + NAA (0.5 mg L-1) + ABA (1.0 mg L-1) with or without activated charcoal (1 g L-1), and light and dark incubation were tested on rhizome formation from microshoots. The results of the above experiments suggest that MS medium supplemented with 50 g L-1 sucrose, 1.0 mg L-1 ABA, and 1 g L-1 AC is good for the induction of rhizomes from the shoots of Cnidium officinale. Plantlets with rhizomes were successfully transferred to pots, and they showed 100% survival.

Development of Hairy Root Cultures for Biomass and Triterpenoid Production in Centella asiatica.

Centella asiatica (Apiaceae) is a tropical/subtropical medicinal plant, which contains a variety of triterpenoids, including madecassoside, asiaticoside, madecassic acid, and asiatic acid. In this study, we tested the efficiency of hairy root (HR) induction in C. asiatica from leaf and petiole explants. Leaves and petioles collected from C. asiatica plants were suspended in agro-stock for 30 min and co-cultured with Agrobacterium rhizogenes for 3 days to induce HR formation. The transformation efficiency of leaf and petiole explants was approximately 27% and 12%, respectively. A total of 36 HR lines were identified by PCR-based amplification of rol genes, and eight of these lines were selected for further analysis. Among all eight HR lines, the petiole-derived lines HP4 and HP2 displayed the highest growth index (37.8) and the highest triterpenoids concentration (46.57 mg∙g-1), respectively. Although triterpenoid concentration was >2-fold higher in leaves than in petioles of C. asiatica plants, the accumulation of triterpenoids in petiole-derived HR cultures was 1.4-fold higher than that in leaf-derived HR cultures. Additionally, in both leaf- and petiole-derived HR cultures, terpenoid production was higher in HRs than in adventitious roots. These results demonstrate that the triterpenoid content in the explant does not affect the triterpenoid content in the resultant HRs. The HR culture of C. asiatica could be scaled up to enable the mass production of triterpenoids in bioreactors for the pharmaceutical and cosmetic industries.

Large-scale production of recombinant miraculin protein in transgenic carrot callus suspension cultures using air-lift bioreactors.

Miraculin, derived from the miracle fruit (Synsepalum dulcificum), is a taste-regulating protein that interacts with human sweet-taste receptors and transforms sourness into sweet taste. Since miracle fruit is cultivated in West Africa, mass production of miraculin is limited by regional and seasonal constraints. Here, we investigated mass production of recombinant miraculin in carrot (Daucus carota L.) callus cultures using an air-lift bioreactor. To increase miraculin expression, the oxidative stress-inducible SWPA2 promoter was used to drive the expression of miraculin gene under various stress treatments. An 8 h treatment of hydrogen peroxide (H2O2) and salt (NaCl) increased the expression of miraculin gene by fivefold compared with the untreated control. On the other hand, abscisic acid, salicylic acid, and methyl jasmonate treatments showed no significant impact on miraculin gene expression compared with the control. This shows that since H2O2 and NaCl treatments induce oxidative stress, they activate the SWPA2 promoter and consequently up-regulate miraculin gene expression. Thus, the results of this study provide a foundation for industrial-scale production of recombinant miraculin protein using transgenic carrot cells as a heterologous host.