RESUMEN
Polyethylene terephthalate (PET) is one of the most widely produced man-made polymers and is a significant contributor to microplastics pollution. The environmental and human health impacts of microplastics pollution have motivated a concerted effort to develop microbe- and enzyme-based strategies to degrade PET and similar plastics. A PETase derived from the bacteria Ideonella sakaiensis was previously shown to enzymatically degrade PET, triggering multidisciplinary efforts to improve the robustness and activity of this and other PETases. However, because these enzymes only erode the surface of the insoluble PET substrate, it is difficult to measure standard kinetic parameters, such as kon, koff and kcat, complicating interpretation of the activity of mutants using traditional enzyme kinetics frameworks. To address this challenge, we developed a single-molecule microscopy assay that quantifies the landing rate and binding duration of quantum dot-labeled PETase enzymes interacting with a surface-immobilized PET film. Wild-type PETase binding durations were well fit by a biexponential with a fast population having a 2.7 s time constant, interpreted as active binding events, and a slow population interpreted as non-specific binding interactions that last tens of seconds. A previously described hyperactive mutant, S238F/W159H had both a faster on-rate and a slower off-rate than wild-type PETase, potentially explaining its enhanced activity. Because this single-molecule approach provides a more detailed mechanistic picture of PETase enzymatic activity than standard bulk assays, it should aid future efforts to engineer more robust and active PETases to combat global microplastics pollution.
RESUMEN
Degrading cellulose is a key step in the processing of lignocellulosic biomass into bioethanol. Cellobiose, the disaccharide product of cellulose degradation, has been shown to inhibit cellulase activity, but the mechanisms underlying product inhibition are not clear. We combined single-molecule imaging and biochemical investigations with the goal of revealing the mechanism by which cellobiose inhibits the activity of Trichoderma reesei Cel7A, a well-characterized exo-cellulase. We find that cellobiose slows the processive velocity of Cel7A and shortens the distance moved per encounter; effects that can be explained by cellobiose binding to the product release site of the enzyme. Cellobiose also strongly inhibits the binding of Cel7A to immobilized cellulose, with a Ki of 2.1 mM. The isolated catalytic domain (CD) of Cel7A was also inhibited to a similar degree by cellobiose, and binding of an isolated carbohydrate-binding module to cellulose was not inhibited by cellobiose, suggesting that cellobiose acts on the CD alone. Finally, cellopentaose inhibited Cel7A binding at micromolar concentrations without affecting the enzyme's velocity of movement along cellulose. Together, these results suggest that cellobiose inhibits Cel7A activity both by binding to the "back door" product release site to slow activity and to the "front door" substrate-binding tunnel to inhibit interaction with cellulose. These findings point to strategies for engineering cellulases to reduce product inhibition and enhance cellulose degradation, supporting the growth of a sustainable bioeconomy.
Asunto(s)
Celobiosa , Celulasa , Celulosa , Hypocreales , Celobiosa/metabolismo , Celulasa/metabolismo , Celulasa/antagonistas & inhibidores , Celulosa/metabolismo , Hypocreales/enzimología , Hypocreales/metabolismo , Imagen Individual de Molécula/métodos , Dominio Catalítico , Proteínas Fúngicas/metabolismo , Proteínas Fúngicas/antagonistas & inhibidores , Proteínas Fúngicas/químicaRESUMEN
GTP-tubulin is preferentially incorporated at growing microtubule ends, but the biochemical mechanism by which the bound nucleotide regulates the strength of tubulin:tubulin interactions is debated. The 'self-acting' (cis) model posits that the nucleotide (GTP or GDP) bound to a particular tubulin dictates how strongly that tubulin interacts, whereas the 'interface-acting' (trans) model posits that the nucleotide at the interface of two tubulin dimers is the determinant. We identified a testable difference between these mechanisms using mixed nucleotide simulations of microtubule elongation: with a self-acting nucleotide, plus- and minus-end growth rates decreased in the same proportion to the amount of GDP-tubulin, whereas with interface-acting nucleotide, plus-end growth rates decreased disproportionately. We then experimentally measured plus- and minus-end elongation rates in mixed nucleotides and observed a disproportionate effect of GDP-tubulin on plus-end growth rates. Simulations of microtubule growth were consistent with GDP-tubulin binding at and 'poisoning' plus-ends but not at minus-ends. Quantitative agreement between simulations and experiments required nucleotide exchange at terminal plus-end subunits to mitigate the poisoning effect of GDP-tubulin there. Our results indicate that the interfacial nucleotide determines tubulin:tubulin interaction strength, thereby settling a longstanding debate over the effect of nucleotide state on microtubule dynamics.
Asunto(s)
Microtúbulos , Tubulina (Proteína) , Polimerizacion , Nucleótidos , Guanosina TrifosfatoRESUMEN
BACKGROUND: Cellulose degradation by cellulases has been studied for decades due to the potential of using lignocellulosic biomass as a sustainable source of bioethanol. In plant cell walls, cellulose is bonded together and strengthened by the polyphenolic polymer, lignin. Because lignin is tightly linked to cellulose and is not digestible by cellulases, is thought to play a dominant role in limiting the efficient enzymatic degradation of plant biomass. Removal of lignin via pretreatments currently limits the cost-efficient production of ethanol from cellulose, motivating the need for a better understanding of how lignin inhibits cellulase-catalyzed degradation of lignocellulose. Work to date using bulk assays has suggested three possible inhibition mechanisms: lignin blocks access of the enzyme to cellulose, lignin impedes progress of the enzyme along cellulose, or lignin binds cellulases directly and acts as a sink. RESULTS: We used single-molecule fluorescence microscopy to investigate the nanoscale dynamics of Cel7A from Trichoderma reesei, as it binds to and moves along purified bacterial cellulose in vitro. Lignified cellulose was generated by polymerizing coniferyl alcohol onto purified bacterial cellulose, and the degree of lignin incorporation into the cellulose meshwork was analyzed by optical and electron microscopy. We found that Cel7A preferentially bound to regions of cellulose where lignin was absent, and that in regions of high lignin density, Cel7A binding was inhibited. With increasing degrees of lignification, there was a decrease in the fraction of Cel7A that moved along cellulose rather than statically binding. Furthermore, with increasing lignification, the velocity of processive Cel7A movement decreased, as did the distance that individual Cel7A molecules moved during processive runs. CONCLUSIONS: In an in vitro system that mimics lignified cellulose in plant cell walls, lignin did not act as a sink to sequester Cel7A and prevent it from interacting with cellulose. Instead, lignin both blocked access of Cel7A to cellulose and impeded the processive movement of Cel7A along cellulose. This work implies that strategies for improving biofuel production efficiency should target weakening interactions between lignin and cellulose surface, and further suggest that nonspecific adsorption of Cel7A to lignin is likely not a dominant mechanism of inhibition.
RESUMEN
Intracellular transport is propelled by kinesin and cytoplasmic dynein motors that carry membrane-bound vesicles and organelles bidirectionally along microtubule tracks. Much is known about these motors at the molecular scale, but many questions remain regarding how kinesin and dynein cooperate and compete during bidirectional cargo transport at the cellular level. The goal of the present study was to use a stochastic stepping model constructed by using published load-dependent properties of kinesin-1 and dynein-dynactin-BicD2 (DDB) to identify specific motor properties that determine the speed, directionality, and transport dynamics of a cargo carried by one kinesin and one dynein motor. Model performance was evaluated by comparing simulations to recently published experiments of kinesin-DDB pairs connected by complementary oligonucleotide linkers. Plotting the instantaneous velocity distributions from kinesin-DDB experiments revealed a single peak centered around zero velocity. In contrast, velocity distributions from simulations displayed a central peak around 100 nm/s, along with two side peaks corresponding to the unloaded kinesin and DDB velocities. We hypothesized that frequent motor detachment events and relatively slow motor reattachment rates resulted in periods in which only one motor is attached. To investigate this hypothesis, we varied specific model parameters and compared the resulting instantaneous velocity distributions, and we confirmed this systematic investigation using a machine-learning approach that minimized the residual sum of squares between the experimental and simulation velocity distributions. The experimental data were best recapitulated by a model in which the kinesin and dynein stall forces are matched, the motor detachment rates are independent of load, and the kinesin-1 reattachment rate is 50 s-1. These results provide new insights into motor dynamics during bidirectional transport and put forth hypotheses that can be tested by future experiments.
Asunto(s)
Dineínas , Cinesinas , Dineínas/metabolismo , Cinesinas/metabolismo , Microtúbulos/metabolismo , Transporte Biológico , Complejo Dinactina/metabolismoRESUMEN
GTP-tubulin is preferentially incorporated at growing microtubule ends, but the biochemical mechanism by which the bound nucleotide regulates the strength of tubulin:tubulin interactions is debated. The 'self-acting' (cis) model posits that the nucleotide (GTP or GDP) bound to a particular tubulin dictates how strongly that tubulin interacts, whereas the 'interface-acting' (trans) model posits that the nucleotide at the interface of two tubulin dimers is the determinant. We identified a testable difference between these mechanisms using mixed nucleotide simulations of microtubule elongation: with self-acting nucleotide, plus- and minus-end growth rates decreased in the same proportion to the amount of GDP-tubulin, whereas with interface-acting nucleotide, plus-end growth rates decreased disproportionately. We then experimentally measured plus- and minus-end elongation rates in mixed nucleotides and observed a disproportionate effect of GDP-tubulin on plus-end growth rates. Simulations of microtubule growth were consistent with GDP-tubulin binding at and 'poisoning' plus-ends but not at minus-ends. Quantitative agreement between simulations and experiments required nucleotide exchange at terminal plus-end subunits to mitigate the poisoning effect of GDP-tubulin there. Our results indicate that the interfacial nucleotide determines tubulin:tubulin interaction strength, thereby settling a longstanding debate over the effect of nucleotide state on microtubule dynamics.
RESUMEN
KIF1A is a highly processive vesicle transport motor in the kinesin-3 family. Mutations in KIF1A lead to neurodegenerative diseases including hereditary spastic paraplegia. We applied optical tweezers to study the ability of KIF1A to generate and sustain force against hindering loads. We used both the three-bead assay, where force is oriented parallel to the microtubule, and the traditional single-bead assay, where force is directed along the radius of the bead, resulting in a vertical force component. The average force and attachment duration of KIF1A in the three-bead assay were substantially greater than those observed in the single-bead assay. Thus, vertical forces accelerate termination of force ramps of KIF1A. Average KIF1A termination forces were slightly lower than the kinesin-1 KIF5B, and the median attachment duration of KIF1A was >10-fold shorter than KIF5B under hindering loads. KIF1A rapidly reengages with microtubules after detachment, as observed previously. Strikingly, quantification enabled by the three-bead assay shows that reengagement largely occurs within 2 ms of detachment, indicating that KIF1A has a nearly 10-fold faster reengagement rate than KIF5B. We found that rapid microtubule reengagement is not due to KIF1A's positively charged loop-12; however, removal of charge from this loop diminished the unloaded run length at near physiological ionic strength. Both loop-12 and the microtubule nucleotide state have modulatory effects on reengagement under load, suggesting a role for the microtubule lattice in KIF1A reengagement. Our results reveal adaptations of KIF1A that lead to a model of superengaging transport under load.
Asunto(s)
Cinesinas , Paraplejía Espástica Hereditaria , Humanos , Cinesinas/genética , Cinesinas/metabolismo , Mutación , Paraplejía Espástica Hereditaria/genética , Transporte Biológico , Microtúbulos/metabolismoRESUMEN
The adapter dynactin and the activator BicD2 associate with dynein to form the highly motile dynein-dynactin-BicD2 (DDB) complex. In single-molecule assays, DDB displays processive runs, diffusive episodes, and transient pauses. The switching rates and durations of the different phases can be determined by tracking gold nanoparticle-labeled DDB complexes with interferometric scattering (iSCAT) microscopy and using an algorithm to separate out different motility phases. Here we describe methods for purifying DDB complexes from brain lysate, labeling with gold nanoparticles, imaging by iSCAT, and analyzing the resulting trajectories.
Asunto(s)
Dineínas , Nanopartículas del Metal , Dineínas/metabolismo , Complejo Dinactina/metabolismo , Proteínas Asociadas a Microtúbulos/metabolismo , Oro , Microtúbulos/metabolismoRESUMEN
KIF1A is an essential neuronal transport motor protein in the kinesin-3 family, known for its superprocessive motility. However, structural features underlying this function are unclear. Here, we determined that superprocessivity of KIF1A dimers originates from a unique structural domain, the lysine-rich insertion in loop-12 termed the 'K-loop', which enhances electrostatic interactions between the motor and the microtubule. In 80 mM PIPES buffer, replacing the native KIF1A loop-12 with that of kinesin-1 resulted in a 6-fold decrease in run length, whereas adding additional positive charge to loop-12 enhanced the run length. Interestingly, swapping the KIF1A loop-12 into kinesin-1 did not enhance its run length, consistent with the two motor families using different mechanochemical tuning to achieve persistent transport. To investigate the mechanism by which the KIF1A K-loop enhances processivity, we used microtubule pelleting and single-molecule dwell time assays in ATP and ADP. First, the microtubule affinity was similar in ATP and in ADP, consistent with the motor spending the majority of its cycle in a weakly bound state. Second, the microtubule affinity and single-molecule dwell time in ADP were 6-fold lower in the loop-swap mutant than WT. Thus, the positive charge in loop-12 of KIF1A enhances the run length by stabilizing binding of the motor in its vulnerable one-head-bound state. Finally, through a series of mutants with varying positive charge in the K-loop, we found that KIF1A processivity is linearly dependent on the charge of loop-12, further highlighting how loop-12 contributes to the function of this key motor protein.
Asunto(s)
Cinesinas , Microtúbulos , Movimiento , Electricidad Estática , Adenosina Trifosfato/metabolismo , Cinesinas/química , Cinesinas/metabolismo , Microtúbulos/química , Microtúbulos/metabolismo , Adenosina Difosfato/metabolismo , Unión Proteica , Imagen Individual de MoléculaRESUMEN
Mitosis is the cellular process that ensures accurate segregation of the cell's genetic material into two daughter cells. Mitosis is often deregulated in cancer; thus drugs that target mitosis-specific proteins represent attractive targets for anticancer therapy. Numerous inhibitors have been developed against kinesin-5 Eg5, a kinesin essential for bipolar spindle assembly. Unfortunately, Eg5 inhibitors (K5Is) have been largely ineffective in the clinic, possibly due to the activity of a second kinesin, KIF15, that can suppress the cytotoxic effect of K5Is by driving spindle assembly through an Eg5-independent pathway. We hypothesized that pairing of K5Is with small molecule inhibitors of KIF15 will be more cytotoxic than either inhibitor alone. Here we present the results of a high-throughput screen from which we identified two inhibitors that inhibit the motor activity of KIF15 both in vitro and in cells. These inhibitors selectively inhibit KIF15 over other molecular motors and differentially affect the ability of KIF15 to bind microtubules. Finally, we find that chemical inhibition of KIF15 reduces the ability of cells to acquire resistance to K5Is, highlighting the centrality of KIF15 to K5I resistance and the value of these inhibitors as tools with which to study KIF15 in a physiological context.
Asunto(s)
Cinesinas , Huso Acromático , Huso Acromático/metabolismo , Microtúbulos/metabolismo , Mitosis , Ciclo CelularRESUMEN
Bidirectional cargo transport in neurons requires competing activity of motors from the kinesin-1, -2, and -3 superfamilies against cytoplasmic dynein-1. Previous studies demonstrated that when kinesin-1 attached to dynein-dynactin-BicD2 (DDB) complex, the tethered motors move slowly with a slight plus-end bias, suggesting kinesin-1 overpowers DDB but DDB generates a substantial hindering load. Compared to kinesin-1, motors from the kinesin-2 and -3 families display a higher sensitivity to load in single-molecule assays and are thus predicted to be overpowered by dynein complexes in cargo transport. To test this prediction, we used a DNA scaffold to pair DDB with members of the kinesin-1, -2, and -3 families to recreate bidirectional transport in vitro, and tracked the motor pairs using two-channel TIRF microscopy. Unexpectedly, we find that when both kinesin and dynein are engaged and stepping on the microtubule, kinesin-1, -2, and -3 motors are able to effectively withstand hindering loads generated by DDB. Stochastic stepping simulations reveal that kinesin-2 and -3 motors compensate for their faster detachment rates under load with faster reattachment kinetics. The similar performance between the three kinesin transport families highlights how motor kinetics play critical roles in balancing forces between kinesin and dynein, and emphasizes the importance of motor regulation by cargo adaptors, regulatory proteins, and the microtubule track for tuning the speed and directionality of cargo transport in cells.
Nerve cells in the human body can reach up to one meter in length. Different regions of a nerve cell require different materials to perform their roles. The motor proteins kinesins and dynein help to transport the required 'cargo', by moving in opposite directions along tracks called microtubules. However, many cargos have both motors attached, resulting in a tug-of-war to determine which direction and how fast the cargo will travel. In many neurodegenerative diseases, including Alzheimer's, this cargo transport goes awry, so a better understanding of exactly how this process works may help to develop new therapies. There are three families of kinesin motors, for a total of about a dozen different kinesins that engage in this process. Motors in each of the three families have different mechanical properties. Specific cargos also tend to have specific kinesins attached to them. Here Gicking et al. hypothesized that when pulling against dynein in a tug-of-war, kinesins from the three families would behave differently. To test this hypothesis, Gicking et al. linked one kinesin to one dynein motor, one at a time in a test tube, and then observed how these two-motor complexes moved using fluorescence microscopy techniques. Unexpectedly, kinesins from the three different families competed similarly against dynein: there were no clear winners and losers. By incorporating previously published data describing the different motor behaviors, Gicking et al. developed a computational model that provided deeper insight into how this mechanical tug-of-war works. The modeling indicated that kinesins from the three families use different approaches for competing against dynein. Kinesin-1 motors tended to pull steadily against dynein, only detaching relatively rarely, but then take some time to attach back to the microtubule track. In contrast, kinesin-3 motors detached easily when they pull against dynein, but they attach back to the microtubule track quickly, taking only about a millisecond to start moving again. Kinesin-2 motors exhibited an intermediate behavior. Overall, these experiments suggest that the mechanical properties of the motor proteins are not the main factors determining the direction and speed of the cargo. In other words, the outcome of this molecular tug-of-war does not necessarily depend on which motor is stronger or faster. Rather, further mechanisms, including regulation of the adapter molecules that connect the motors to their cargo, may help to regulate which cargo go where in branched nerve cells. A better knowledge of how all these different factors work together will be important for understanding how cargo transport in nerve cells is disrupted in neurodegenerative diseases.
Asunto(s)
Dineínas , Cinesinas , Transporte Biológico , Dineínas Citoplasmáticas/metabolismo , ADN/metabolismo , Complejo Dinactina/metabolismo , Dineínas/metabolismo , Humanos , Hidrocarburos Clorados , Microtúbulos/metabolismoRESUMEN
A new study investigates the transport and force-generating properties of KIF1C, a member of the kinesin-3 motor family, finding that KIF1C is better able to sustain loads than its sibling KIF1A and that patient-derived mutants are particularly defective in their ability to generate force.
Asunto(s)
Cinesinas , Transporte Biológico , Humanos , Cinesinas/genéticaRESUMEN
Cytoskeletal filaments, such as microtubules and actin filaments, play important roles in the mechanical integrity of cells and the ability of cells to respond to their environment. Measuring the mechanical properties of cytoskeletal structures is crucial for gaining insight into intracellular mechanical stresses and their role in regulating cellular processes. One of the ways to characterize these mechanical properties is by measuring their persistence length, the average length over which filaments stay straight. There are several approaches in the literature for measuring filament deformations, such as Fourier analysis of images obtained using fluorescence microscopy. Here, we show how curvature distributions can be used as an alternative tool to quantify biofilament deformations, and investigate how the apparent stiffness of filaments depends on the resolution and noise of the imaging system. We present analytical calculations of the scaling curvature distributions as a function of filament discretization, and test our predictions by comparing Monte Carlo simulations with results from existing techniques. We also apply our approach to microtubules and actin filaments obtained from in vitro gliding assay experiments with high densities of nonfunctional motors, and calculate the persistence length of these filaments. The presented curvature analysis is significantly more accurate compared with existing approaches for small data sets, and can be readily applied to both in vitro and in vivo filament data through the use of the open-source codes we provide.
Asunto(s)
Citoesqueleto de Actina , Citoesqueleto , Citoesqueleto de Actina/química , Microscopía Fluorescente , Microtúbulos , Estrés MecánicoRESUMEN
Microtubule polymerization dynamics result from the biochemical interactions of αß-tubulin with the polymer end, but a quantitative understanding has been challenging to establish. We used interference reflection microscopy to make improved measurements of microtubule growth rates and growth fluctuations in the presence and absence of GTP hydrolysis. In the absence of GTP hydrolysis, microtubules grew steadily with very low fluctuations. These data were best described by a computational model implementing slow assembly kinetics, such that the rate of microtubule elongation is primarily limited by the rate of αß-tubulin associations. With GTPase present, microtubules displayed substantially larger growth fluctuations than expected based on the no GTPase measurements. Our modeling showed that these larger fluctuations occurred because exposure of GDP-tubulin on the microtubule end transiently 'poisoned' growth, yielding a wider range of growth rates compared to GTP only conditions. Our experiments and modeling point to slow association kinetics (strong longitudinal interactions), such that drugs and regulatory proteins that alter microtubule dynamics could do so by modulating either the association or dissociation rate of tubulin from the microtubule tip. By causing slower growth, exposure of GDP-tubulin at the growing microtubule end may be an important early event determining catastrophe.
Asunto(s)
Microtúbulos , Tubulina (Proteína) , Guanosina Difosfato/metabolismo , Guanosina Trifosfato/metabolismo , Cinética , Microtúbulos/metabolismo , Tubulina (Proteína)/metabolismoRESUMEN
Bone modeling can be modulated by lipid signals such as arachidonic acid (AA) and its cyclooxygenase 2 (COX2) metabolite, prostaglandin E2 (PGE2), which are recognized mediators of optimal bone formation. Hydrolysis of AA from membrane glycerophospholipids is catalyzed by phospholipases A2 (PLA2s). We reported that mice deficient in the Ca2+- independent PLA2beta (iPLA2ß), encoded by Pla2g6, exhibit a low bone phenotype, but the cause for this remains to be identified. Here, we examined the mechanistic and molecular roles of iPLA2ß in bone formation using bone marrow stromal cells and calvarial osteoblasts from WT and iPLA2ß-deficient mice, and the MC3T3-E1 osteoblast precursor cell line. Our data reveal that transcription of osteogenic factors (Bmp2, Alpl, and Runx2) and osteogenesis are decreased with iPLA2ß-deficiency. These outcomes are corroborated and recapitulated in WT cells treated with a selective inhibitor of iPLA2 ß (10 µM S-BEL), and rescued in iPLA2ß-deficient cells by additions of 10 µM PGE2. Further, under osteogenic conditions we find that PGE2 production is through iPLA2ß activity and that this leads to induction of Runx2 and iPLA2ß transcription. These findings reveal a strong link between osteogenesis and iPLA2ß-derived lipids and raise the intriguing possibility that iPLA2ß-derived PGE2 participates in osteogenesis and in the regulation of Runx2 and also iPLA2ß.
Asunto(s)
Células Secretoras de Insulina , Osteogénesis , Animales , Huesos , Dinoprostona/farmacología , Fosfolipasas A2 Grupo VI/genética , Ratones , Fosfolipasas A2RESUMEN
Intracellular transport by microtubule-based molecular motors is marked by qualitatively different behaviors. It is a long-standing and still-open challenge to accurately quantify the various individual-cargo behaviors and how they are affected by the presence or absence of particular motor families. In this work we introduce a protocol for analyzing change points in cargo trajectories that can be faithfully projected along the length of a (mostly) straight microtubule. Our protocol consists of automated identification of velocity change points, estimation of velocities during the behavior segments, and extrapolation to motor-specific velocity distributions. Using simulated data we show that our method compares favorably with existing methods. We then apply the technique to data sets in which quantum dots are transported by Kinesin-1, by Dynein-Dynactin-BicD2 (DDB), and by Kinesin-1/DDB pairs. In the end, we identify pausing behavior that is consistent with some tug-of-war model predictions, but also demonstrate that the simultaneous presence of antagonistic motors can lead to long processive runs that could contribute favorably to population-wide transport.
Asunto(s)
Dineínas , Cinesinas , Transporte Biológico , Complejo Dinactina/metabolismo , Dineínas/metabolismo , Humanos , Microtúbulos/metabolismoRESUMEN
Membrane-bound cargos in cells are generally transported by multiple kinesin motors. Quantifying the bimolecular on-rate of motors for their microtubule track is important for understanding of multi-motor transport but is complicated by diffusion of the motors in the plane of the lipid bilayer. Here, we describe a method to measure the kinesin on-rate that uses a modified microtubule gliding assay performed on a supported lipid bilayer and detects motor binding by a local increase in fluorescence. For complete details on the use and execution of this protocol, please refer to Jiang et al. (2019).
Asunto(s)
Cinesinas/fisiología , Microscopía Fluorescente/métodos , Microtúbulos/fisiología , Transporte Biológico , Difusión , Cinética , Membrana Dobles de Lípidos/análisis , Membrana Dobles de Lípidos/metabolismo , Membranas/metabolismo , Microtúbulos/química , Unión Proteica/fisiologíaRESUMEN
Understanding the mechanism by which cellulases from bacteria, fungi, and protozoans catalyze the digestion of lignocellulose is important for developing cost-effective strategies for bioethanol production. Cel7A from the fungus Trichoderma reesei is a model exoglucanase that degrades cellulose strands from their reducing ends by processively cleaving individual cellobiose units. Despite being one of the most studied cellulases, the binding and hydrolysis mechanisms of Cel7A are still debated. Here, we used single-molecule tracking to analyze the dynamics of 11,116 quantum dot-labeled TrCel7A molecules binding to and moving processively along immobilized cellulose. Individual enzyme molecules were localized with a spatial precision of a few nanometers and followed for hundreds of seconds. Most enzyme molecules bound to cellulose in a static state and dissociated without detectable movement, whereas a minority of molecules moved processively for an average distance of 39 nm at an average speed of 3.2 nm/s. These data were integrated into a three-state model in which TrCel7A molecules can bind from solution into either static or processive states and can reversibly switch between states before dissociating. From these results, we conclude that the rate-limiting step for cellulose degradation by Cel7A is the transition out of the static state, either by dissociation from the cellulose surface or by initiation of a processive run. Thus, accelerating the transition of Cel7A out of its static state is a potential avenue for improving cellulase efficiency.
Asunto(s)
Celulosa 1,4-beta-Celobiosidasa/metabolismo , Celulosa/metabolismo , Proteínas Fúngicas/metabolismo , Hypocreales/enzimología , Acetobacteraceae/metabolismo , Hidrólisis , Microscopía de Fuerza Atómica , Microscopía Fluorescente , Puntos Cuánticos , Especificidad por SustratoRESUMEN
We describe a multimodal microscope for visualizing processive enzymes moving on immobilized substrates. The instrument combines interference reflection microscopy (IRM) with multi-wavelength total internal reflectance fluorescence microscopy (TIRFM). The microscope can localize quantum dots with a precision of 2.8â nm at 100 frames/s, and was used to image the dynamics of the cellulase, Cel7a interacting with surface-immobilized cellulose. The instrument, which was built with off-the-shelf components and is controlled by custom software, is suitable for tracking other degradative enzymes such as collagenases, as well as motor proteins moving along immobilized tracks.
RESUMEN
Axons and dendrites are distinguished by microtubule polarity. In Drosophila, dendrites are dominated by minus-end-out microtubules, whereas axons contain plus-end-out microtubules. Local nucleation in dendrites generates microtubules in both orientations. To understand why dendritic nucleation does not disrupt polarity, we used live imaging to analyze the fate of microtubules generated at branch points. We found that they had different rates of success exiting the branch based on orientation: correctly oriented minus-end-out microtubules succeeded in leaving about twice as often as incorrectly oriented microtubules. Increased success relied on other microtubules in a parallel orientation. From a candidate screen, we identified Trim9 and kinesin-5 (Klp61F) as machinery that promoted growth of new microtubules. In S2 cells, Eb1 recruited Trim9 to microtubules. Klp61F promoted microtubule growth in vitro and in vivo, and could recruit Trim9 in S2 cells. In summary, the data argue that Trim9 and kinesin-5 act together at microtubule plus ends to help polymerizing microtubules parallel to pre-existing ones resist catastrophe.