Tethering Three Radical Cascades for Controlled Termination of Radical Alkyne peri-Annulations: Making Phenalenyl Ketones without Oxidants.

Although Bu3Sn-mediated radical alkyne peri-annulations allow access to phenalenyl ring systems, the oxidative termination of these cascades provides only a limited selection of the possible isomeric phenalenone products with product selectivity controlled by the intrinsic properties of the new cyclic systems. In this work, we report an oxidant-free termination strategy that can overcome this limitation and enable selective access to the full set of isomerically functionalized phenalenones. The key to preferential termination is the preinstallation of a "weak link" that undergoes C-O fragmentation in the final cascade step. Breaking a C-O bond is assisted by entropy, gain of conjugation in the product, and release of stabilized radical fragments. This strategy is expanded to radical exo-dig cyclization cascades of oligoalkynes, which provide access to isomeric π-extended phenalenones. Conveniently, these cascades introduce functionalities (i.e., Bu3Sn and iodide moieties) amenable to further cross-coupling reactions. Consequently, a variety of polyaromatic diones, which could serve as phenalenyl-based open-shell precursors, can be synthesized.

Correction: Extracting accurate information from triplet-triplet annihilation upconversion data with a mass-conserving kinetic model.

Correction for 'Extracting accurate information from triplet-triplet annihilation upconversion data with a mass-conserving kinetic model' by Abhishek Kalpattu et al., Phys. Chem. Chem. Phys., 2022, 24, 28174-28190, https://doi.org/10.1039/D2CP03986A.

Exploring Differences in Lanthanide Excited State Reactivity Using a Simple Example: The Photophysics of La and Ce Thenoyltrifluoroacetone Complexes.

A series of four lanthanide thenoyltrifluoroacetone (TTA) complexes consisting of two f0 (La3+ and Ce4+) and two f1 (Ce3+) complexes was examined using steady-state and time-resolved spectroscopic techniques. The wide range of spectroscopic techniques presented herein have enabled us to discern the nature of the excited states (charge transfer, CT vs ligand localized, LL) as well as construct a Jablonski diagram for detailing the excited state reactivity within the series of molecules. The wavelength and excitation power dependence for these series of complexes are the first direct verification for the presence of simultaneous competing, noninteracting CT and LL excited states. Additionally, a computational framework is described that can be used to support spectroscopic assignments as a guide for future studies. Finally, the relationship between the obtained photophysics and possible photochemical separation mechanisms is described.

Molecular Orientation and Energy Transfer Dynamics of a Metal Oxide Bound Self-Assembled Trilayer.

Self-assembly of molecular multilayers via metal ion linkages has become an important strategy for interfacial engineering of metalloid and metal oxide (MOx) substrates, with applications in numerous areas, including energy harvesting, catalysis, and chemical sensing. An important aspect for the rational design of these multilayers is knowledge of the molecular structure-function relationships. For example, in a multilayer composed of different chromophores in each layer, the molecular orientation of each layer, both relative to the adjacent layers and the substrate, influences the efficiency of vectorial energy and electron transfer. Here, we describe an approach using UV-vis attenuated total reflection (ATR) spectroscopy to determine the mean dipole tilt angle of chromophores in each layer in a metal ion-linked trilayer self-assembled on indium-tin oxide. To our knowledge, this is the first report demonstrating the measurement of the orientation of three different chromophores in a single assembly. The ATR approach allows the adsorption of each layer to be monitored in real-time, and any changes in the orientation of an underlying layer arising from the adsorption of an overlying layer can be detected. We also performed transient absorption spectroscopy to monitor interlayer energy transfer dynamics in order to relate structure to function. We found that near unity efficiency, sub-nanosecond energy transfer between the third and second layer was primarily dictated by the distance between the chromophores. Thus, in this case, the orientation had minimal impact at such proximity.

Influence of Al2O3 Overlayers on Intermolecular Interactions between Metal Oxide Bound Molecules.

Intermolecular interactions on inorganic substrates can have a critical impact on the electrochemical and photophysical properties of the materials and subsequent performance in hybrid electronics. Critical to the intentional formation or inhibition of these processes is controlling interactions between molecules on a surface. In this report, we investigated the impact of surface loading and atomic-layer-deposited Al2O3 overlayers on the intermolecular interactions of a ZrO2-bound anthracene derivative as probed by the photophysical properties of the interface. While surface loading density had no impact on the absorption spectra of the films, there was an increase in excimer features with surface loading as observed by both emission and transient absorption. The addition of ALD overlayers of Al2O3 resulted in a decrease in excimer formation, but the emission and transient absorption spectra were still dominated by excimer features. These results suggest that ALD may provide a post-surface loading means of influencing such intermolecular interactions.

Molecular Orientation of -PO3H2 and -COOH Functionalized Dyes on TiO2, Al2O3, ZrO2, and ITO: A Comparative Study.

Modification of transparent metal oxide (MOx) surfaces with organic monolayers is widely employed to tailor the properties of interfaces in organic electronic devices, and MOx substrates modified with light-absorbing chromophores are a key component of dye-sensitized solar cells (DSSCs). The effects of an organic modifier on the performance of a MOx-based device are frequently assessed by performing experiments on model monolayer|MOx interfaces, where an "inert" MOx (e.g., Al2O3) is used as a control for an "active" MOx (e.g., TiO2). An underlying assumption in these studies is that the structure of the MOx-monolayer complex is similar between different metal oxides. The validity of this assumption was examined in the present study. Using UV-Vis attenuated total reflection spectroscopy, we measured the mean dipole tilt angle of 4,4'-(anthracene-9,10-diyl)bis(4,1-phenylene)diphosphonic acid (A1P) adsorbed on indium tin oxide (ITO), TiO2, ZrO2, and Al2O3. When the surface roughness of the MOx substrate and the surface coverage (𝛤) of the A1P film were constant, the molecular orientation of A1P was the same on these substrates. The study was extended to 4,4'-(anthracene-9,10-diyl)bis(4,1-phenylene)dicarboxylic acid (A1C) adsorbed on the same group of MOx substrates. The mean tilt angle of A1C and A1P films on ITO was the same, which is likely due the intermolecular interactions resulting from the high and approximately equal 𝛤 of both films. Comparing A1C films at the same 𝛤 on TiO2 and Al2O3 having the same surface roughness, there was no difference in the mean tilt angle. MD simulations of A1C and A1P on TiO2 produced nearly identical tilt angle distributions, which supports the experimental findings. This study provides first experimental support for the assumption that the structure of the MOx-modifer film is the same on an "active" substrate vs. a "inert" control substrate.

EMS Care of Adult Hospice Patients- a Position Statement and Resource Document of NAEMSP and AAHPM.

Emergency medical services (EMS) systems are designed to provide care in the field and while transporting patients to a hospital; however, patients enrolled in hospice may not want invasive therapies nor benefit from hospitalization. For many reasons, encounters with hospice patients can be challenging for EMS systems, EMS clinicians, hospice clinicians, hospice patients, and their families.

EMS clinicians should receive hospice-focused education that fosters a basic understanding of hospice, palliative therapies, and advance care planning documents (e.g., Physician Orders for Life Sustaining Treatment). This education should emphasize the ongoing development of end-of-life communication skills.EMS medical directors and local hospice organizations should collaborate to develop hospice patient-centered EMS protocols that address symptom management and delineate appropriate and goal concordant clinical interventions, and that are within the agency-level scope of practice for local EMS clinicians. Partnerships between EMS and hospice organizations can facilitate access to hospice teams who can provide clear guidance on whether to treat-in-place with follow-up care or to transport hospice patients to the hospital.EMS medical directors and local hospice organizations should collaborate to perform needs assessments of hospice patient EMS utilization.EMS medical directors should consider including a focus on EMS care of hospice patients as part of their overall quality management program(s). Ideally these efforts should be collaborative with local hospice agencies in order to facilitate meaningful process improvement strategies that include both EMS and hospice stakeholders.Reimbursement programs should reasonably compensate EMS agencies for scene treatment in place, as well as transport to alternative destinations such as in-patient hospice facilities.

Top Ten Tips Palliative Care Clinicians Should Know About Improving Partnerships With Emergency Medical Services.

Emergency medical services (EMS) clinicians increasingly encounter seriously ill patients and their caregivers in times of distress. When crises arise or care coordination falls short, these high-stakes interactions highlight opportunities to improve care experience and outcomes. Efforts must address wide educational gaps, absence of specialized care protocols, and systematic fragmentation leading to hyperlocal practice. The authors represent cross-sectional expertise in palliative care and EMS. This article describes unmet needs at the EMS-palliative interface, challenges with collaboration, and where directional progress exists.

Efficient Red Light Emitting Diodes Based on a Zero-Dimensional Organic Antimony Halide Hybrid.

Zero-dimensional (0D) organic metal halide hybrids (OMHHs) have recently emerged as a new class of light emitting materials with exceptional color tunability. While near-unity photoluminescence quantum efficiencies (PLQEs) are routinely obtained for a large number of 0D OMHHs, it remains challenging to apply them as emitter for electrically driven light emitting diodes (LEDs), largely due to the low conductivity of wide bandgap organic cations. Here, the development of a new OMHH, triphenyl(9-phenyl-9H-carbazol-3-yl) phosphonium antimony bromide (TPPcarzSbBr4 ), as emitter for efficient LEDs, which consists of semiconducting organic cations (TPPcarz+ ) and light emitting antimony bromide anions (Sb2 Br8 2- ), is reported. By replacing one of the phenyl groups in a well-known tetraphenylphosphonium cation (TPP+ ) with an electroactive phenylcarbazole group, a semiconducting TPPcarz+ cation is developed for the preparation of red emitting 0D TPPcarzSbBr4 single crystals with a high PLQE of 93.8%. With solution processed TPPcarzSbBr4 thin films (PLQE of 86.1%) as light emitting layer, red LEDs are fabricated to exhibit an external quantum efficiency (EQE) of 5.12%, a peak luminance of 5957 cd m-2 , and a current efficiency of 14.2 cd A-1 , which are the best values reported to date for electroluminescence devices based on 0D OMHHs.

Enhanced Diastereocontrol via Strong Light-Matter Interactions in an Optical Cavity.

The enantiopurification of racemic mixtures of chiral molecules is important for a range of applications. Recent work has shown that chiral group-directed photoisomerization is a promising approach to enantioenrich racemic mixtures of BINOL, but increased control of the diasteriomeric excess (de) is necessary for its broad utility. Here we develop a cavity quantum electrodynamics (QED) generalization of time-dependent density functional theory and demonstrate computationally that strong light-matter coupling can alter the de of the chiral group-directed photoisomerization of BINOL. The relative orientation of the cavity mode polarization and the molecules in the cavity dictates the nature of the cavity interactions, which either enhance the de of the (R)-BINOL diasteriomer (from 17% to ≈40%) or invert the favorability to the (S)-BINOL derivative (to ≈34% de). The latter outcome is particularly remarkable because it indicates that the preference in diasteriomer can be influenced via orientational control, without changing the chirality of the directing group. We demonstrate that the observed effect stems from cavity-induced changes to the Kohn-Sham orbitals of the ground state.

Assessing Carbazole Derivatives as Single-Electron Photoreductants.

The electron-donating capabilities of carbazoles have stimulated interest in their use as photoinduced single-electron reductants. Due to the modularity of the carbazole, a further broadening and understanding of their reactivity could be achieved by manipulating the structure. Herein, eight carbazole derivatives were synthesized, characterized, and assessed as single-electron photoreductants in the hydrodehalogenation of aryl halides and the arylation of N-methylpyrrole.

Extracting accurate information from triplet-triplet annihilation upconversion data with a mass-conserving kinetic model.

Triplet-triplet annihilation upconversion (TTA-UC) is a process that shows promise for applications such as energy-harvesting and light-generation technologies. The irradiance dependent performance of TTA-UC systems is typically gauged using a graphical analysis, rather than a detailed model. Additionally, kinetic models for TTA-UC rarely incorporate mass conservation, which is a phenomenon that can have important consequences under experimentally relevant conditions. We present an analytical, mass-conserving kinetic model for TTA-UC, and demonstrate that the mass-conservation constraint cannot generally be ignored. This model accounts for saturation in TTA-UC data. Saturation complicates the interpretation of the threshold irradiance Ith, a popular performance metric. We propose two alternative figures of merit for overall performance. Finally, we show that our model can robustly fit experimental data from a wide variety of sensitized TTA-UC systems, enabling the direct and accurate determination of Ith and of our proposed performance metrics. We employ this fitting procedure to benchmark and compare these metrics, using data from the literature.

Molecular Z-Scheme for Solar Fuel Production via Dual Photocatalytic Cycles.

Natural photosynthesis uses an array of molecular structures in a multiphoton Z-scheme for the conversion of light energy into chemical bonds (i.e., solar fuels). Here, we show that upon excitation of both a molecular photocatalyst (PC) and a substituted naphthol (ROH) in the presence of a sacrificial electron donor and proton source, we achieve photocatalytic synthesis of H2. Data support a multiphoton mechanism that is catalytic with respect to both PC and ROH. The use of a naphthol molecule as both a light absorber and H2 producing catalyst is a unique motif for Z-scheme systems. This molecular Z-scheme can drive a reaction that is uphill by 511 kJ mol-1 and circumvents the high-energy constraints associated with the reduction of weak acids in their ground state, thus offering a new paradigm for the production of solar fuels.

Balancing the interplay between ligand ejection and therapeutic window light absorption in ruthenium polypyridyl complexes.

Ruthenium polypyridyl complexes have gained significant interest as photochemotherapies (PCTs) where their excited-state properties play a critical role in the photo-cytotoxicity mechanism and efficacy. Herein we report a systematic electrochemical, spectrochemical, and photophysical analysis of a series of ruthenium(II) polypyridyl complexes of the type [Ru(bpy)2(N-N)]2+ (where bpy = 2,2'-bipyridine; N-N is a bidentate polypyridyl ligand) designed to mimic PCTs. In this series, the N-N ligand was modified through increased conjugation and/or incorporation of electronegative heteroatoms to shift the metal-to-ligand charge-transfer (MLCT) absorptions near the therapeutic window for PCTs (600-1100 nm) while incorporating steric bulk to trigger photoinduced ligand dissociation. The lowest energy MLCT absorptions were red-shifted from λmax = 454 nm to 564 nm, with emission energies decreasing from λmax = 620 nm to 850 nm. Photoinduced ligand ejection and temperature-dependent emission studies revealed an important interplay between red-shifting MLCT absorptions and accessing the dissociative 3dd* states, with energy barriers between the 3MLCT* and 3dd* states ranging from 850 cm-1 to 2580 cm-1 for the complexes measured. This work demonstrates the importance of understanding both the MLCT manifold and 3dd* state energy levels in the future design of ligands and complexes for PCT.

Brief photographic history of the SPIE medical imaging meetings.

To celebrate the 50th anniversary of the SPIE Medical Imaging meetings, I present photographs taken over the last three decades, selected with the goal of highlighting the enthusiasm and energy of the participants, which has led to the ongoing success of these meetings. Links are given to access complete albums for individual meetings.

Harnessing Sunlight via Molecular Photon Upconversion.

Molecular photon upconversion via triplet-triplet annihilation (TTA-UC) is an intriguing strategy to harness sub-bandgap photons and surpass the Shockley-Queisser (SQ) limit for solar energy conversion. In this perspective, we briefly summarize the progress to date harnessing TTA-UC in solar cells using both optically and electrically coupled schemes. We then highlight the efficiency limiting processes for these schemes and outline possible paths toward upconverted photocurrent contributions of >1 mA/cm2. Further progress in red-shifting absorption, coupling to high-energy light harvesting motifs, photon management, sensitizer/annihilator design, and more are necessary for the realization of a viable TTA-UC solar cell that can pass the SQ limit.

Synthesis of multi-substituted pyridines from ylidenemalononitriles and their emission properties.

Numerous methodologies to obtain pyridines from ylidenemalononitriles are described in the literature. Nevertheless, they are limited to the use of microwave or conventional heat and few lead to 2,3,4 or 2,3,4,5-substituted pyridines as multi-proposal molecular scaffolds or even universal pyridines. Herein, we present a mild and facile solvent-free methodology to obtain a scope of multi-substituted pyridines at room temperature. We also report an example where one of the resulting amino-nicotinonitriles exhibits a preliminary evidence of aggregation-induced emission (AIE).

Highly Efficient and Stable Perovskite Solar Cells Enabled by Low-Cost Industrial Organic Pigment Coating.

Surface passivation of perovskite solar cells (PSCs) using a low-cost industrial organic pigment quinacridone (QA) is presented. The procedure involves solution processing a soluble derivative of QA, N,N-bis(tert-butyloxycarbonyl)-quinacridone (TBOC-QA), followed by thermal annealing to convert TBOC-QA into insoluble QA. With halide perovskite thin films coated by QA, PSCs based on methylammonium lead iodide (MAPbI3 ) showed significantly improved performance with remarkable stability. A PCE of 21.1 % was achieved, which is much higher than 18.9 % recorded for the unmodified devices. The QA coating with exceptional insolubility and hydrophobicity also led to greatly enhanced contact angle from 35.6° for the pristine MAPbI3 thin films to 77.2° for QA coated MAPbI3 thin films. The stability of QA passivated MAPbI3 perovskite thin films and PSCs were significantly enhanced, retaining about 90 % of the initial efficiencies after more than 1000 hours storage under ambient conditions.