Revealing cellular (poly)sulphide storage in electrochemically active sulphide oxidising bacteria using rotating disc electrodes.

Sulphide oxidising bacteria (SOB) have the potential to be used for bioelectrochemical removal, i.e. oxidation, of sulphide from waste streams. In anaerobic conditions, SOB are able to spatially separate sulphide removal and terminal electron transfer to an electrode and act as a sulphide shuttle. However, it is not fully understood how SOB anaerobically remove sulphide and store charge equivalents, and where in this process sulphur is formed. Therefore, the redox behaviour of sulphide shuttling SOB was investigated at haloalkaline conditions using a glassy carbon rotating disc electrode (RDE) and cyclic voltammetry. Voltammograms of SOB in the absence and presence of sulphide were compared to voltammograms of abiotic sulphur species solutions. Polysulphide and sulphide showed different redox behaviour, with distinct potentials for oxidation of > -0.3 V (vs. Ag/AgCl) for polysulphide and > -0.1 V for sulphide. Comparing biotic to abiotic experiments lead to the hypothesis that SOB formed polysulphides during anaerobic sulphide removal, which stayed sorbed to the cells. With this study, further steps were taken in elucidating the mechanisms of sulphide shuttling by SOB.

Effect of model methanogens on the electrochemical activity, stability, and microbial community structure of Geobacter spp. dominated biofilm anodes.

Combining anaerobic digestion (AD) and microbial electrochemical technologies (MET) in AD-MET holds great potential. Methanogens have been identified as one cause of decreased electrochemical activity and deterioration of Geobacter spp. biofilm anodes. A better understanding of the different interactions between methanogenic genera/species and Geobacter spp. biofilms is needed to shed light on the observed reduction in electrochemical activity and stability of Geobacter spp. dominated biofilms as well as observed changes in microbial communities of AD-MET. Here, we have analyzed electrochemical parameters and changes in the microbial community of Geobacter spp. biofilm anodes when exposed to three representative methanogens with different metabolic pathways, i.e., Methanosarcina barkeri, Methanobacterium formicicum, and Methanothrix soehngenii. M. barkeri negatively affected the performance and stability of Geobacter spp. biofilm anodes only in the initial batches. In contrast, M. formicicum did not affect the stability of Geobacter spp. biofilm anodes but caused a decrease in maximum current density of ~37%. M. soehngenii induced a coloration change of Geobacter spp. biofilm anodes and a decrease in the total transferred charge by ~40%. Characterization of biofilm samples after each experiment by 16S rRNA metabarcoding, whole metagenome nanopore sequencing, and shotgun sequencing showed a higher relative abundance of Geobacter spp. after exposure to M. barkeri as opposed to M. formicicum or M. soehngenii, despite the massive biofilm dispersal observed during initial exposure to M. barkeri.

Microbial electrosynthesis: opportunities for microbial pure cultures.

Microbial electrosynthesis (MES) is an emerging technology that couples renewable electricity to microbial production processes. Although advances in MES performance have been driven largely by microbial mixed cultures, we see a great limitation in the diversity, and hence value, of products that can be achieved in undefined mixed cultures. By contrast, metabolic control of pure cultures and genetic engineering could greatly expand the scope of MES, and even of broader electrobiotechnology, to include targeted high-value products. To leverage this potential, we advocate for more efforts and activities to develop engineered electroactive microbes for synthesis, and we highlight the need for a standardized electrobioreactor infrastructure that allows the establishment and engineering of electrobioprocesses with these novel biocatalysts.

Cable Bacteria Skeletons as Catalytically Active Electrodes.

Cable bacteria are multicellular, filamentous bacteria that use internal conductive fibers to transfer electrons over centimeter distances from donors within anoxic sediment layers to oxygen at the surface. We extracted the fibers and used them as free-standing bio-based electrodes to investigate their electrocatalytic behavior. The fibers catalyzed the reversible interconversion of oxygen and water, and an electric current was running through the fibers even when the potential difference was generated solely by a gradient of oxygen concentration. Oxygen reduction as well as oxygen evolution were confirmed by optical measurements. Within living cable bacteria, oxygen reduction by direct electrocatalysis on the fibers and not by membrane-bound proteins readily explains exceptionally high cell-specific oxygen consumption rates observed in the oxic zone, while electrocatalytic water oxidation may provide oxygen to cells in the anoxic zone.

Comparing theoretical and practical biomass yields calls for revisiting thermodynamic growth models for electroactive microorganisms.

Research on electroactive microorganisms (EAM) often focuses either on their physiology and the underlying mechanisms of extracellular electron transfer or on their application in microbial electrochemical technologies (MET). Thermodynamic understanding of energy conversions related to growth and activity of EAM has received only a little attention. In this study, we aimed to prove the hypothesized restricted energy harvest of EAM by determining biomass yields by monitoring growth of acetate-fed biofilms presumably enriched in Geobacter, using optical coherence tomography, at three anode potentials and four acetate concentrations. Experiments were concurrently simulated using a refined thermodynamic model for EAM. Neither clear correlations were observed between biomass yield and anode potential nor acetate concentration, albeit the statistical significances are limited, mainly due to the observed experimental variances. The experimental biomass yield based on acetate consumption (YX/ac = 37 ± 9 mgCODbiomass gCODac-1) was higher than estimated by modeling, indicating limitations of existing growth models to predict yields of EAM. In contrast, the modeled biomass yield based on catabolic energy harvest was higher than the biomass yield from experimental data (YX/cat = 25.9 ± 6.8 mgCODbiomass kJ-1), supporting restricted energy harvest of EAM and indicating a role of not considered energy sinks. This calls for an adjusted growth model for EAM, including, e.g., the microbial electrochemical Peltier heat to improve the understanding and modeling of their energy metabolism. Furthermore, the reported biomass yields are important parameters to design strategies for influencing the interactions between EAM and other microorganisms and allowing more realistic feasibility assessments of MET.

Microbial electrosynthesis with Clostridium ljungdahlii benefits from hydrogen electron mediation and permits a greater variety of products.

Microbial electrosynthesis (MES) is a very promising technology addressing the challenge of carbon dioxide recycling into organic compounds, which might serve as building blocks for the (bio)chemical industry. However, poor process control and understanding of fundamental aspects such as the microbial extracellular electron transfer (EET) currently limit further developments. In the model acetogen Clostridium ljungdahlii, both direct and indirect electron consumption via hydrogen have been proposed. However, without clarification neither targeted development of the microbial catalyst nor process engineering of MES are possible. In this study, cathodic hydrogen is demonstrated to be the dominating electron source for C. ljungdahlii at electroautotrophic MES allowing for superior growth and biosynthesis, compared to previously reported MES using pure cultures. Hydrogen availability distinctly controlled an either planktonic- or biofilm-dominated lifestyle of C. ljungdahlii. The most robust operation yielded higher planktonic cell densities in a hydrogen mediated process, which demonstrated the uncoupling of growth and biofilm formation. This coincided with an increase of metabolic activity, acetate titers, and production rates (up to 6.06 g L-1 at 0.11 g L-1 d-1). For the first time, MES using C. ljungdahlii was also revealed to deliver other products than acetate in significant amounts: here up to 0.39 g L-1 glycine or 0.14 g L-1 ethanolamine. Hence, a deeper comprehension of the electrophysiology of C. ljungdahlii was shown to be key for designing and improving bioprocess strategies in MES research.

The microbiology of Power-to-X applications.

Power-to-X (P2X) technologies will play a more important role in the conversion of electric power to storable energy carriers, commodity chemicals and even food and feed. Among the different P2X technologies, microbial components form cornerstones of individual process steps. This review comprehensively presents the state-of-the-art of different P2X technologies from a microbiological standpoint. We are focusing on microbial conversions of hydrogen from water electrolysis to methane, other chemicals and proteins. We present the microbial toolbox needed to gain access to these products of interest, assess its current status and research needs, and discuss potential future developments that are needed to turn todays P2X concepts into tomorrow's technologies.

Application of gas diffusion electrodes in bioeconomy: An update.

The transition of today's fossil fuel based chemical industry toward sustainable production requires improvement of established production processes as well as development of new sustainable and bio-based synthesis routes within a circular economy. Thereby, the combination of electrochemical and biotechnological advantages in such routes represents one important keystone. For the electrochemical generation of reactants from gaseous substrates such as O2 or CO2 , gas diffusion electrodes (GDE) represent the electrodes of choice since they overcome solubility-based mass transport limitations. Within this article, we illustrate the architecture, function principle and fabrication of GDE. We highlight the application of GDE for conversion of CO2 using abiotic catalysts for subsequent biosynthesis as well as the application of microbial catalysts at GDE for CO2 conversion. The reduction of oxygen at GDE is summarized for the application of oxygen depolarized cathodes in microbial fuel cells and generation of H2 O2 to drive enzymatic reactions. Finally, engineering aspects such as scale-up and the modeling of GDE-based processes are described. This review presents an update on the application of GDE in bio-based production systems and emphasizes their large potential for sustainable development of new pathways in bioeconomy.

Combining Geobacter spp. Dominated Biofilms and Anaerobic Digestion Effluents─The Effect of Effluent Composition and Electrode Potential on Biofilm Activity and Stability.

The combination of anaerobic digestion (AD) and microbial electrochemical technologies (METs) offers different opportunities to increase the efficiency and sustainability of AD processes. However, methanogenic archaea and/or particles may partially hinder combining MET and AD processes. Furthermore, it is unclear if the applied anode potential affects the activity and efficiency of electroactive microorganisms in AD-MET combinations as it is described for more controlled experimental conditions. In this study, we confirm that 6-week-old Geobacter spp. dominated biofilms are by far more active and stable in AD-effluents than 3-week-old Geobacter spp. dominated biofilms. Furthermore, we show that the biofilms are twice as active at -0.2 V compared to 0.4 V, even under challenging conditions occurring in AD-MET systems. Paired-end amplicon sequencing at the DNA level using 16S-rRNA and mcrA gene shows that hydrogenotrophic methanogens incorporate into biofilms immersed in AD-effluent without any negative effect on biofilm stability and electrochemical activity.

Improving the performance of bioelectrochemical sulfate removal by applying flow mode.

Treatment of wastewater contaminated with high sulfate concentrations is an environmental imperative lacking a sustainable and environmental friendly technological solution. Microbial electrochemical technology (MET) represents a promising approach for sulfate reduction. In MET, a cathode is introduced as inexhaustible electron source for promoting sulfate reduction via direct or mediated electron transfer. So far, this is mainly studied in batch mode representing straightforward and easy-to-use systems, but their practical implementation seems unlikely, as treatment capacities are limited. Here, we investigated bioelectrochemical sulfate reduction in flow mode and achieved removal efficiencies (Esulfate , 89.2 ± 0.4%) being comparable to batch experiments, while sulfate removal rates (Rsulfate , 3.1 ± 0.2 mmol L-1 ) and Coulombic efficiencies (CE, 85.2 ± 17.7%) were significantly increased. Different temperatures and hydraulic retention times (HRT) were applied and the best performance was achieved at HRT 3.5 days and 30°C. Microbial community analysis based on amplicon sequencing demonstrated that sulfate reduction was mainly performed by prokaryotes belonging to the genera Desulfomicrobium, Desulfovibrio, and Desulfococcus, indicating that hydrogenotrophic and heterotrophic sulfate reduction occurred by utilizing cathodically produced H2 or acetate produced by homoacetogens (Acetobacterium). The advantage of flow operation for bioelectrochemical sulfate reduction is likely based on higher absolute biomass, stable pH, and selection of sulfate reducers with a higher sulfide tolerance, and improved ratio between sulfate-reducing prokaryotes and homoacetogens.

Upgrading Kolbe Electrolysis-Highly Efficient Production of Green Fuels and Solvents by Coupling Biosynthesis and Electrosynthesis.

The chemical industry is transitioning to more sustainable and biobased processes. One key element of this transition is coupling energy fluxes and feedstock utilization for optimizing processes, routes and efficiencies. Here, we show for the first time the coupling of the Kolbe electrolysis at the anode with a subsequent microbial conversion of the cathodically produced co-product hydrogen. Kolbe electrolysis of valeric acid yields the liquid drop-in fuel additive n-octane. Subsequently, the solvent isopropanol is produced by resting Cupriavidus necator cells using gaseous electrolysis products (esp. CO2 and H2 ). The resting microbial cells show carbon efficiencies of up to 41 % and Coulombic/Faradaic efficiencies of 60 % and 80 % for anodic and cathodic reactions, respectively. The implementation of a paired electrolyser resulted in superior process performances with overall efficiencies of up to 64.4 %.

Hetero-Coupling of Bio-Based Medium-Chain Carboxylic Acids by Kolbe Electrolysis Enables High Fuel Yield and Efficiency.

Mixtures of n-carboxylic acids (n-CA) as derived from microbial conversion of waste biomass were converted to bio-fuel using Kolbe electrolysis. While providing full carbon and electron balances, key parameters like electrolysis time, chain length of n-CA, and pH were investigated for their influence on reaction efficiency. Electrolysis of n-hexanoic acid showed the highest coulombic efficiency (CE) of 58.9±16.4 % (n=4) for liquid fuel production among individually tested n-CA. Duration of the electrolysis was varied within a range of 0.27 to 1.02 faraday equivalents without loss of efficiency. Noteworthy, CE increased to around 70 % by hetero-coupling when electrolysing n-CA mixtures regardless of the applied pH. Thus, 1 L of fuel could be produced from 12.4 mol of n-CA mixture using 5.02 kWh (<1 € L-1 ). Thus, a coupling with microbial processes producing n-CA mixtures from different organic substrates and waste is more than promising.

The oxygen dilemma: The challenge of the anode reaction for microbial electrosynthesis from CO2.

Microbial electrosynthesis (MES) from CO2 provides chemicals and fuels by driving the metabolism of microorganisms with electrons from cathodes in bioelectrochemical systems. These microorganisms are usually strictly anaerobic. At the same time, the anode reaction of bioelectrochemical systems is almost exclusively water splitting through the oxygen evolution reaction (OER). This creates a dilemma for MES development and engineering. Oxygen penetration to the cathode has to be excluded to avoid toxicity and efficiency losses while assuring low resistance. We show that this dilemma derives a strong need to identify novel reactor designs when using the OER as an anode reaction or to fully replace OER with alternative oxidation reactions.

Insights into the syntrophic microbial electrochemical oxidation of toluene: a combined chemical, electrochemical, taxonomical, functional gene-based, and metaproteomic approach.

Biodegradation of aromatic hydrocarbons in anoxic contaminated environments is typically limited by the lack of bioavailable electron acceptors. Microbial electrochemical technologies (METs) are able to provide a virtually inexhaustible electron acceptor in the form of a solid electrode. Recently, we provided first experimental evidence for the syntrophic degradation of toluene in a continuous-flow bioelectrochemical reactor known as the "bioelectric well". Herein, we further analyzed the structure and function of the electroactive toluene-degrading microbiome using a suite of chemical, electrochemical, phylogenetic, proteomic, and functional gene-based analyses. The bioelectric well removed 83 ± 7 % of the toluene from the influent with a coulombic efficiency of 84 %. Cyclic voltammetry allowed to identify the formal potentials of four putative electron transfer sites, which ranged from -0.2 V to +0.1 V vs. SHE, consistent with outer membrane c-type cytochromes and pili of electroactive Geobacter species. The biofilm colonizing the surface of the anode was indeed highly enriched in Geobacter species. On the other hand, the planktonic communities thriving in the bulk of the reactor harbored aromatic hydrocarbons degraders and fermentative propionate-producing microorganisms, as revealed by phylogenetic and proteomic analyses. Most likely, propionate, acetate or other VFAs produced in the bulk liquid from the degradation of toluene were utilized as substrates by the electroactive biofilm. Interestingly, key-functional genes related to the degradation of toluene were found both in the biofilm and in the planktonic communities. Taken as a whole, the herein reported results highlight the importance of applying a comprehensive suite of techniques to unravel the complex cooperative metabolisms occurring in METs.

Electrochemical and Microbial Dissection of Electrified Biotrickling Filters.

Electrified biotrickling filters represent sustainable microbial electrochemical technology for treating organic carbon-deficient ammonium-contaminated waters. However, information on the microbiome of the conductive granule bed cathode remains inexistent. For uncovering this black box and for identifying key process parameters, minimally invasive sampling units were introduced, allowing for the extraction of granules from different reactor layers during reactor operation. Sampled granules were analyzed using cyclic voltammetry and molecular biological tools. Two main redox sites [-288 ± 18 mV and -206 ± 21 mV vs. standard hydrogen electrode (SHE)] related to bioelectrochemical denitrification were identified, exhibiting high activity in a broad pH range (pH 6-10). A genome-centric analysis revealed a complex nitrogen food web and the presence of typical denitrifiers like Pseudomonas nitroreducens and Paracoccus versutus with none of these species being identified as electroactive microorganism so far. These are the first results to provide insights into microbial structure-function relationships within electrified biotrickling filters and underline the robustness and application potential of bioelectrochemical denitrification for environmental remediation.

Thickness and roughness of transparent gold-palladium anodes have no impact on growth kinetics and yield coefficients of early-stage Geobacter sulfurreducens biofilms.

Geobacter sulfurreducens is the model organism for electroactive microorganisms performing direct extracellular electron transfer and forming thick mature biofilm electrodes. Although numerous physiological properties of mature biofilm electrodes are deciphered, there is an extensive gap of knowledge on the early-stage biofilm formation. We have shown recently that transparent gold-palladium (AuPd) electrodes allow for analysis of early-stage biofilm formation using confocal laser scanning microscopy. Here we analysed the influence of thickness (ranging from 12.5 to 200 nm) and roughness of AuPd electrodes on physiological parameters of G. sulfurreducens early-stage biofilms. We show that when grown potentiostatically at -200 mV vs. Ag/ AgCl sat. KCl neither maximum current density (jmax of âˆ¼ 80-150 µA cm-2) nor lag time (lag t of âˆ¼ 0.2-0.4 days) or single cell yield coefficients (YNe of 1.43 × 1012 cells mole--1) of the biofilms are influenced by the electrode preparation. This confirms the robustness of the experimental approach, which is an inevitable prerequisite for obtaining reliable results in follow-up experiments.

A unified and simple medium for growing model methanogens.

Apart from their archetypic use in anaerobic digestion (AD) methanogenic archaea are targeted for a wide range of applications. Using different methanogenic archaea for one specific application requires the optimization of culture media to enable the growth of different strains under identical environmental conditions, e.g., in microbial electrochemical technologies (MET) for (bio)electromethanation. Here we present a new culture medium (BFS01) adapted from the DSM-120 medium by omitting resazurin, yeast extract, casitone, and using a low salt concentration, that was optimized for Methanosarcina barkeri, Methanobacterium formicicum, and Methanothrix soehngenii. The aim was to provide a medium for follow-up co-culture studies using specific methanogens and Geobacter spp. dominated biofilm anodes. All three methanogens showed growth and activity in the BFS01 medium. This was demonstrated by estimating the specific growth rates ( µ ) and doubling times ( t d ) of each methanogen. The µ and t d based on methane accumulation in the headspace showed values consistent with literature values for M. barkeri and M. soehngenii. However, µ and t d based on methane accumulation in the headspace differed from literature data for M. formicicum but still allowed sufficient growth. The lowered salt concentration and the omission of chemically complex organic components in the medium may have led to the observed deviation from µ and t d for M. formicicum as well as the changed morphology. 16S rRNA gene-based amplicon sequencing and whole genome nanopore sequencing further confirmed purity and species identity.

Platinized Titanium as Alternative Cost-Effective Anode for Efficient Kolbe Electrolysis in Aqueous Electrolyte Solutions.

Five commercial materials were assessed for electrochemical conversion of n-hexanoic acid by Kolbe electrolysis. Platinized titanium performed best, achieving a coulombic efficiency (CE) of 93.1±6.7 % (n=6) for the degradation of n-hexanoic acid and 48.3±3.2 % (n=6) for the production of n-decane, which is close to the performance of pure platinum (89.7±14.4 and 55.5±3.5 %; n=6). 56.7 mL liquid fuel was produced per mole n-hexanoic acid, converting to an energy demand of 6.66 kWh and 1.22 € per L. Using optical profilometry and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, it was shown that the degree of coverage of the titanium surface with platinum played the most important role. An uncovered surface of as little as 1-3 % already led to a deterioration of the CE of approximately 50 %. Using platinized titanium requires >36 times less capital expenditure at only <10 % increased operational expenditure; an electrode lifetime of 10000 h can be expected.

Benefits of Age-Improved Resistance of Mature Electroactive Biofilm Anodes in Anaerobic Digestion.

Anaerobic digestion (AD) and microbial electrochemical technologies (MET) can be combined in manifold ways. Recent studies show negative influences of AD effluents on the performance of pre-grown Geobacter spp.-dominated biofilm anodes. In this study, it was investigated how such biofilm anodes are affected by AD effluents. Therefore, experiments using AD effluents in different concentrations (0-100%) in combination with biofilms of different ages were performed. Furthermore, the activity of methanogens was inhibited and minimized by application of 2-bromoethanesulfonate (2-BES) and microfiltration, respectively. Biofilms pre-grown for 5 weeks show higher resistance against AD effluents compared to biofilms pre-grown for only 3 weeks. Nevertheless, adaptation of biofilms to AD effluents was not successful. Biofilm activity in terms of coulombic efficiency and maximum current density (jmax) dropped by factor 32.2 ± 3.2 and 38.9 ± 8.4, respectively. The application of 2-BES and microfiltration had positive effects on the biofilm activity. The results support the assumption that methanogens or further compounds not studied here, for example, protozoans, which may have been inhibited or removed by 2-BES application or microfiltration, have an immediate influence on the stability of Geobacter spp.-dominated biofilms and may limit their practical application in AD environments.