Conjugated Polymer Heteroatom Engineering Enables High Detectivity Symmetric Ambipolar Phototransistors.

Solution-processed high-performing ambipolar organic phototransistors (OPTs) can enable low-cost integrated circuits. Here, a heteroatom engineering approach to modify the electron affinity of a low band gap diketopyrrolopyrole (DPP) co-polymer, resulting in well-balanced charge transport, a more preferential edge-on orientation and higher crystallinity, is demonstrated. Changing the comonomer heteroatom from sulfur (benzothiadiazole (BT)) to oxygen (benzooxadiazole (BO)) leads to an increased electron affinity and introduces higher ambipolarity. Organic thin film transistors fabricated from the novel PDPP-BO exhibit charge carrier mobility of 0.6 and 0.3 cm2 Vs⁻1 for electrons and holes, respectively. Due to the high sensitivity of the PDPP-based material and the balanced transport in PDPP-BO, its application as an NIR detector in an OPT architecture is presented. By maintaining a high on/off ratio (9 × 104), ambipolar OPTs are shown with photoresponsivity of 69 and 99 A W⁻1 and specific detectivity of 8 × 107 for the p-type operation and 4 × 109 Jones for the n-type regime. The high symmetric NIR-ambipolar OPTs are also evaluated as ambipolar photo-inverters, and show a 46% gain enhancement under illumination.

Functional mechanism study of the allelochemical myrigalone A identifies a group of ultrapotent inhibitors of ethylene biosynthesis in plants.

Allelochemicals represent a class of natural products released by plants as root, leaf, and fruit exudates that interfere with the growth and survival of neighboring plants. Understanding how allelochemicals function to regulate plant responses may provide valuable new approaches to better control plant function. One such allelochemical, Myrigalone A (MyA) produced by Myrica gale, inhibits seed germination and seedling growth through an unknown mechanism. Here, we investigate MyA using the tractable model Dictyostelium discoideum and reveal that its activity depends on the conserved homolog of the plant ethylene synthesis protein 1-aminocyclopropane-1-carboxylic acid oxidase (ACO). Furthermore, in silico modeling predicts the direct binding of MyA to ACO within the catalytic pocket. In D. discoideum, ablation of ACO mimics the MyA-dependent developmental delay, which is partially restored by exogenous ethylene, and MyA reduces ethylene production. In Arabidopsis thaliana, MyA treatment delays seed germination, and this effect is rescued by exogenous ethylene. It also mimics the effect of established ACO inhibitors on root and hypocotyl extension, blocks ethylene-dependent root hair production, and reduces ethylene production. Finally, in silico binding analyses identify a range of highly potent ethylene inhibitors that block ethylene-dependent response and reduce ethylene production in Arabidopsis. Thus, we demonstrate a molecular mechanism by which the allelochemical MyA reduces ethylene biosynthesis and identify a range of ultrapotent inhibitors of ethylene-regulated responses.

Porous Laser-Scribed Graphene Electrodes Modified with Zwitterionic Moieties: A Strategy for Antibiofouling and Low-Impedance Interfaces.

Laser-scribed graphene electrodes (LSGEs) are promising platforms for the development of electrochemical biosensors for point-of-care settings and continuous monitoring and wearable applications. However, the frequent occurrence of biofouling drastically reduces the sensitivity and selectivity of these devices, hampering their sensing performance. Herein, we describe a versatile, low-impedance, and robust antibiofouling interface based on sulfobetaine-zwitterionic moieties. The interface induces the formation of a hydration layer and exerts electrostatic repulsion, protecting the electrode surface from the nonspecific adsorption of various biofouling agents. We demonstrate through electrochemical and microscopy techniques that the modified electrode exhibits outstanding antifouling properties, preserving more than 90% of the original signal after 24 h of exposure to bovine serum albumin protein, HeLa cells, and Escherichia coli bacteria. The promising performance of this antifouling strategy suggests that it is a viable option for prolonging the lifetime of LSGEs-based sensors when operating on complex biological systems.

Regulating surface potential maximizes voltage in all-perovskite tandems.

The open-circuit voltage (VOC) deficit in perovskite solar cells is greater in wide-bandgap (over 1.7 eV) cells than in perovskites of roughly 1.5 eV (refs. 1,2). Quasi-Fermi-level-splitting measurements show VOC-limiting recombination at the electron-transport-layer contact3-5. This, we find, stems from inhomogeneous surface potential and poor perovskite-electron transport layer energetic alignment. Common monoammonium surface treatments fail to address this; as an alternative, we introduce diammonium molecules to modify perovskite surface states and achieve a more uniform spatial distribution of surface potential. Using 1,3-propane diammonium, quasi-Fermi-level splitting increases by 90 meV, enabling 1.79 eV perovskite solar cells with a certified 1.33 V VOC and over 19% power conversion efficiency (PCE). Incorporating this layer into a monolithic all-perovskite tandem, we report a record VOC of 2.19 V (89% of the detailed balance VOC limit) and over 27% PCE (26.3% certified quasi-steady state). These tandems retained more than 86% of their initial PCE after 500 h of operation.

Enhancing the Backbone Coplanarity of n-Type Copolymers for Higher Electron Mobility and Stability in Organic Electrochemical Transistors.

Electron-transporting (n-type) conjugated polymers have recently been applied in numerous electrochemical applications, where both ion and electron transport are required. Despite continuous efforts to improve their performance and stability, n-type conjugated polymers with mixed conduction still lag behind their hole-transporting (p-type) counterparts, limiting the functions of electrochemical devices. In this work, we investigate the effect of enhanced backbone coplanarity on the electrochemical activity and mixed ionic-electronic conduction properties of n-type polymers during operation in aqueous media. Through substitution of the widely employed electron-deficient naphthalene diimide (NDI) unit for the core-extended naphthodithiophene diimide (NDTI) units, the resulting polymer shows a more planar backbone with closer packing, leading to an increase in the electron mobility in organic electrochemical transistors (OECTs) by more than two orders of magnitude. The NDTI-based polymer shows a deep-lying lowest unoccupied molecular orbital level, enabling operation of the OECT closer to 0 V vs Ag/AgCl, where fewer parasitic reactions with molecular oxygen occur. Enhancing the backbone coplanarity also leads to a lower affinity toward water uptake during cycling, resulting in improved stability during continuous electrochemical charging and ON-OFF switching relative to the NDI derivative. Furthermore, the NDTI-based polymer also demonstrates near-perfect shelf-life stability over a month-long test, exhibiting a negligible decrease in both the maximum on-current and transconductance. Our results highlight the importance of polymer backbone design for developing stable, high-performing n-type materials with mixed ionic-electronic conduction in aqueous media.

Efficient and stable perovskite-silicon tandem solar cells through contact displacement by MgFx.

The performance of perovskite solar cells with inverted polarity (p-i-n) is still limited by recombination at their electron extraction interface, which also lowers the power conversion efficiency (PCE) of p-i-n perovskite-silicon tandem solar cells. A MgFx interlayer with thickness of ~1 nanometer at the perovskite/C60 interface favorably adjusts the surface energy of the perovskite layer through thermal evaporation, which facilitates efficient electron extraction and displaces C60 from the perovskite surface to mitigate nonradiative recombination. These effects enable a champion open-circuit voltage of 1.92 volts, an improved fill factor of 80.7%, and an independently certified stabilized PCE of 29.3% for a monolithic perovskite-silicon tandem solar cell ~1 square centimeter in area. The tandem retained ~95% of its initial performance after damp-heat testing (85°C at 85% relative humidity) for >1000 hours.

Bismuth-based mixed-anion compounds for anode materials in rechargeable batteries.

A facile solvothermal synthesis approach for chemical composition control in ternary Bi-S-I systems is reported by simply controlling the sulfide concentration. We demonstrate the application of these bismuth-based ternary mixed-anion compounds as high capacity anode materials in rechargeable batteries. Cells utilising Bi13S18I2 achieved an initial capacity value of 807 mA h g-1, while those with BiSI/Bi13S18I2 a value of 1087 mA h g-1 in lithium-ion battery systems.

Damp heat-stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions.

If perovskite solar cells (PSCs) with high power conversion efficiencies (PCEs) are to be commercialized, they must achieve long-term stability, which is usually assessed with accelerated degradation tests. One of the persistent obstacles for PSCs has been successfully passing the damp-heat test (85°C and 85% relative humidity), which is the standard for verifying the stability of commercial photovoltaic (PV) modules. We fabricated damp heat-stable PSCs by tailoring the dimensional fragments of two-dimensional perovskite layers formed at room temperature with oleylammonium iodide molecules; these layers passivate the perovskite surface at the electron-selective contact. The resulting inverted PSCs deliver a 24.3% PCE and retain >95% of their initial value after >1000 hours at damp-heat test conditions, thereby meeting one of the critical industrial stability standards for PV modules.

Scaled Deposition of Ti3C2Tx MXene on Complex Surfaces: Application Assessment as Rear Electrodes for Silicon Heterojunction Solar Cells.

Two-dimensional transition metal carbides (MXenes) are of great interest as electrode materials for a variety of applications, including solar cells, due to their tunable optoelectronic properties, high metallic conductivity, and attractive solution processability. However, thus far, MXene electrodes have only been exploited for lab-scale device applications. Here, to demonstrate the potential of MXene electrodes at an industry-relevant level, we implemented a scalable spray coating technique to deposit highly conductive (ca. 8000 S/cm, at a ca. 55 nm thickness) Ti3C2Tx films (Tx: surface functional groups, i.e., -OH, -O, -F) via an automated spray system. We employed these Ti3C2Tx films as rear electrodes for silicon heterojunction solar cells as a proof of concept. The spray-deposited MXene flakes have formed a conformal coating on top of the indium tin oxide (ITO)-coated random pyramidal textured silicon wafers, leading to >20% power conversion efficiency (PCE) over both medium-sized (4.2 cm2) and large (243 cm2, i.e., industry-sized 6 in. pseudosquare wafers) cell areas. Notably, the Ti3C2Tx-rear-contacted devices have retained around 99% of their initial PCE for more than 600 days of ambient air storage. Their performance is comparable with state-of-the-art solar cells contacted with sputtered silver electrodes. Our findings demonstrate the high-throughput potential of spray-coated MXene-based electrodes for solar cells in addition to a wider variety of electronic device applications.

Direct Visualization of a Gold Nanoparticle Electron Trapping Effect.

A new atomic-scale anisotropy in the photoreaction of surface carboxylates on rutile TiO2(110) induced by gold clusters is found. STM and DFT+U are used to study this phenomenon by monitoring the photoreaction of a prototype hole-scavenger molecule, benzoic acid, over stoichiometric (s) s-TiO2, Au9/s-TiO2, and reduced (r) Au9/r-TiO2. STM results show that benzoic acid adsorption displaces a large fraction of Au clusters from the terraces toward their edges. DFT calculations explain that Au9 clusters on stoichiometric TiO2 are distorted by benzoic acid adsorption. The influence of sub-monolayers of Au on the UV/visible photoreaction of benzoic acid was explored at room temperature, with adsorbate depletion taken as a measure of activity. The empty sites, observed upon photoexcitation, occurred in elongated chains (2 to 6 molecules long) in the [11̅0] and [001] directions. A roughly 3-fold higher depletion rate is observed in the [001] direction. This is linked to the anisotropic conduction of excited electrons along [001], with subsequent trapping by Au clusters leaving a higher concentration of holes and thus an increased decomposition rate. To our knowledge this is the first time that atomic-scale directionality of a chemical reaction is reported upon photoexcitation of the semiconductor.

Psychometric Evidence of the Attitudes Toward Food Scale for Native Hawaiians.

Many efforts are being made to promote healthy eating habits and nutrition among Native Hawaiian communities by cultivating positive attitudes toward healthy foods. However, there are limited quantitative scales that have been psychometrically validated with Native Hawaiian communities. This paper examines evidence on the reliability and validity of the Attitudes Toward Food (ATF) scale used with 68 Native Hawaiian adults from Waimanalo who are participating in a backyard aquaponics intervention called Mini Ahupua'a for Lifestyle and Mea'ai through Aquaponics (MALAMA). Exploratory factor analysis (EFA) and internal consistency reliability analysis were conducted to examine the underlying constructs of the ATF scale. Cognitive interviews with 3 MALAMA participants were also conducted to analyze how participants understood, processed, and responded to the scale. Findings from the cognitive interviews provided response-process evidence of validity and acceptability. Findings from the EFA revealed 2 factors. Factor 1 contained items that discussed confidence in preparing and using healthy foods. Factor 2 contained items that involved the consumption of healthy foods. The reliability analysis suggested that the 2 factors of the ATF scale are internally consistent (Cronbach's alpha = 0.79 and 0.71, respectively). Taken together, the evidence provides provisional support for the validity and reliability of the instrument for measuring attitudes among Native Hawaiians from Waimanalo. The ATF scale may be useful for similar health and nutritional programs for Native Hawaiians in Hawai'i. Future studies with larger samples and diverse sources of validity evidence may provide additional support of the scale's validity.

Carboxylate Adsorption on Rutile TiO2(100): Role of Coulomb Repulsion, Relaxation, and Steric Hindrance.

Understanding the adsorption and photoactivity of acetic acid and trimethyl acetic acid on TiO2 surfaces is important for improving the performance of photocatalysts and dye-sensitized solar cells. Here we present a structural study of adsorption on rutile TiO2(100)-1 × 1 and -1 × 3 using Scanning Tunnelling Microscopy and Density Functional Theory calculations. Exposure of both terminations to acetic acid gives rise to a ×2 periodicity in the [001] direction (i.e., along Ti rows), with a majority ordered c(2 × 2) phase in the case of the 1 × 1 termination. The DFT calculations suggest that the preference of c(2 × 2) over the 2 × 1 periodicity found for TiO2(110)-1 × 1 can be attributed to an increase in interadsorbate Coulomb repulsion. Exposure of TiO2(100)-1 × 1 and -1 × 3 to trimethyl acetic acid gives rise to largely disordered structures due to steric effects, with quasi-order occurring in small areas and near step edges where these effects are reduced.

Intrinsic efficiency limits in low-bandgap non-fullerene acceptor organic solar cells.

In bulk heterojunction (BHJ) organic solar cells (OSCs) both the electron affinity (EA) and ionization energy (IE) offsets at the donor-acceptor interface should equally control exciton dissociation. Here, we demonstrate that in low-bandgap non-fullerene acceptor (NFA) BHJs ultrafast donor-to-acceptor energy transfer precedes hole transfer from the acceptor to the donor and thus renders the EA offset virtually unimportant. Moreover, sizeable bulk IE offsets of about 0.5 eV are needed for efficient charge transfer and high internal quantum efficiencies, since energy level bending at the donor-NFA interface caused by the acceptors' quadrupole moments prevents efficient exciton-to-charge-transfer state conversion at low IE offsets. The same bending, however, is the origin of the barrier-less charge transfer state to free charge conversion. Our results provide a comprehensive picture of the photophysics of NFA-based blends, and show that sizeable bulk IE offsets are essential to design efficient BHJ OSCs based on low-bandgap NFAs.

Acene Ring Size Optimization in Fused Lactam Polymers Enabling High n-Type Organic Thermoelectric Performance.

Three n-type fused lactam semiconducting polymers were synthesized for thermoelectric and transistor applications via a cheap, highly atom-efficient, and nontoxic transition-metal free aldol polycondensation. Energy level analysis of the three polymers demonstrated that reducing the central acene core size from two anthracenes (A-A), to mixed naphthalene-anthracene (A-N), and two naphthalene cores (N-N) resulted in progressively larger electron affinities, thereby suggesting an increasingly more favorable and efficient solution doping process when employing 4-(2,3-dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (N-DMBI) as the dopant. Meanwhile, organic field effect transistor (OFET) mobility data showed the N-N and A-N polymers to feature the highest charge carrier mobilities, further highlighting the benefits of aryl core contraction to the electronic performance of the materials. Ultimately, the combination of these two factors resulted in N-N, A-N, and A-A to display power factors (PFs) of 3.2 µW m-1 K-2, 1.6 µW m-1 K-2, and 0.3 µW m-1 K-2, respectively, when doped with N-DMBI, whereby the PFs recorded for N-N and A-N are among the highest reported in the literature for n-type polymers. Importantly, the results reported in this study highlight that modulating the size of the central acene ring is a highly effective molecular design strategy to optimize the thermoelectric performance of conjugated polymers, thus also providing new insights into the molecular design guidelines for the next generation of high-performance n-type materials for thermoelectric applications.

Lewis-Acid Doping of Triphenylamine-Based Hole Transport Materials Improves the Performance and Stability of Perovskite Solar Cells.

Highly efficient perovskite solar cells (PSCs) fabricated in the classic n-i-p configuration generally employ triphenylamine-based hole-transport layers (HTLs) such as spiro-OMeTAD, PTAA, and poly-TPD. Controllable doping of such layers has been critical to achieve increased conductivity and high device performance. To this end, LiTFSI/tBP doping and subsequent air exposure is widely utilized. However, this approach often leads to low device stability and reproducibility. Departing from this point, we introduce the Lewis acid tris(pentafluorophenyl)borane (TPFB) as an effective dopant, resulting in a significantly improved conductivity and lowered surface potential for triphenylamine-based HTLs. Here, we specifically investigated spiro-OMeTAD, which is the most widely used HTL for n-i-p devices, and revealed improved power conversion efficiency (PCE) and stability of the PSCs. Further, we demonstrated the applicability of TPFB doping to other triphenylamine-based HTLs. Spectroscopic characterizations reveal that TPFB doping results in significantly improved charge transport and reduced recombination losses. Importantly, the TPFB-doped perovskite devices retained near 85% of the initial PCE after 1000 h of storage in the air, while the conventional LiTFSI-doped device dropped to 75%. Finally, we give insight into utilizing other similar molecular dopants such as fluorine-free triphenylborane and phosphorus-centered tris(pentafluorophenyl)phosphine (TPFP) by density functional theory analysis underscoring the significance of the central boron atom and fluorination in TPFB for the formation of Lewis acid-base adducts.

Impressive near-infrared brightness and singlet oxygen generation from strategic lanthanide-porphyrin double-decker complexes in aqueous solution.

Although lanthanide double-decker complexes with hetero-macrocyclic ligands as functional luminescent and magnetic materials have promising properties, their inferior water solubility has negated their biomedical applications. Herein, four water-soluble homoleptic lanthanide (Ln = Gd, Er, Yb and La) sandwiches with diethylene-glycol-disubstituted porphyrins (DD) are reported, with their structures proven by both quantum chemical calculations and scanning tunneling microscopy. Our findings demonstrate that the near-infrared emission intensity and singlet oxygen (1O2) quantum yields of YbDD and GdDD in aqueous media are higher than those of the reported capped lanthanide monoporphyrinato analogues, YbN and GdN; the brightness and luminescence lifetime in water of YbDD are greater than those of YbN. This work provides a new dimension for the future design and development of molecular theranostics-based water-soluble double-decker lanthanide bisporphyrinates.

Bridging Hydroxyls on Anatase TiO2(101) by Water Dissociation in Oxygen Vacancies.

Titanium dioxide is a promising candidate for photocatalytic H2 fuel production, and understanding water splitting on TiO2 surfaces is vital toward explaining and improving the generation of H2. In this work, we electron irradiate anatase TiO2(101) at room temperature to create metastable surface oxygen vacancies in order to investigate their ability to dissociate H2O. Our scanning tunneling microscopy investigations suggest that the surface oxygen vacancies can dissociate H2O by forming bridging OH species. This claim is supported by theoretical calculations from the literature and our previously published spectroscopic measurements.

A pilot cluster randomised trial to assess the effect of a structured communication approach on quality of life in secure mental health settings: The Comquol Study.

BACKGROUND: There is a lack of research in forensic settings examining therapeutic relationships. A structured communication approach, placing patients' perspectives at the heart of discussions about their care, was used to improve patients' quality of life in secure settings. The objectives were to: • Establish the feasibility of the trial design • Determine the variability of the outcomes of interest • Estimate the costs of the intervention • If necessary, refine the intervention METHODS: A pilot cluster randomised controlled trial was conducted. Data was collected from July 2012 to January 2015 from participants in 6 medium secure in-patient services in London and Southern England. 55 patients and 47 nurses were in the intervention group with 57 patients and 45 nurses in the control group. The intervention comprised 6 nurse-patient meetings over a 6 month period. Patients rated their satisfaction with a range of domains followed by discussions on improving patient identified problems. Assessments took place at baseline, 6 months, and 12 months. Participants were not blind to their allocated group. The primary outcome was self-reported quality of life collected by a researcher blind to participants' allocation status. RESULTS: The randomisation procedures and intervention approach functioned well. The measures used were understood by the participants and gave relevant outcome information. The response rates were good with low patient withdrawal rates. The quality of life estimated treatment effect was 0.2 (95 % CI: -0.4 to 0.8) at 6 months and 0.4 (95 % CI: -0.3 to 1.1) indicating the likely extreme boundaries of effect in the main trial. The estimated treatment effect of the primary outcome is clinically important, and a positive effect of the intervention is not ruled out. The estimate of the ICC for the primary outcome at 6 and 12 months was 0.04 (0.00 to 0.17) and 0.05 (0.00 to 0.18). The cost of the intervention was £529 per patient. CONCLUSIONS: The trial design was viable as the basis for a full-scale trial. A full trial is justified to estimate the effect of the intervention with greater certainty. The variability of the outcomes could be used to calculate numbers needed for a full-scale trial. Ratings of need for therapeutic security may be useful in any future study. TRIAL REGISTRATION: Current Controlled Trials ISRCTN34145189 . Retrospectively registered 22 June 2012.