Electroactive Ionic Polymer of Intrinsic Microporosity for High-Performance Capacitive Energy Storage.

Here, an ionic polymer of intrinsic microporosity (PIM) as a high-functioning supercapacitor electrode without the need for conductive additives or binders is reported. The performance of this material is directly related to its large accessible surface area. By comparing electrochemical performance between a porous viologen PIM and a nonporous viologen polymer, it is revealed that the high energy and power density are both due to the ability of ions to rapidly access the ionic PIM. In 0.1 m H2SO4 electrolyte, a pseudocapacitve energy of 315 F g-1 is observed, whereas in 0.1 m Na2SO4, a capacitive energy density of 250 F g-1 is obtained. In both cases, this capacity is retained over 10 000 charge-discharge cycles, without the need for stabilizing binders or conductive additives even at moderate loadings (5 mg cm-2). This desirable performance is maintained in a prototype symmetric two-electrode capacitor device, which has >99% Coloumbic efficiency and a <10 mF capacity drop over 2000 cycles. These results demonstrate that ionic PIMs function well as standalone supercapacitor electrodes and suggest ionic PIMs may perform well in other electrochemical devices such as sensors, ion-separation membranes, or displays.

Instability in strongly stratified plane Couette flow, with application to supercritical fluids.

This paper addresses the stability of plane Couette flow in the presence of strong density and viscosity stratifications. It demonstrates the existence of a generalised inflection point that satisfies the generalised Fjørtoft's criterion of instability when a minimum of kinematic viscosity is present in the base flow. The characteristic scales associated with this minimum are identified as the primary controlling parameters of the associated instability, regardless of the type of stratification. To support this finding, analytical stability models are derived in the long wave approximation using piecewise linear base flows. Numerical stability calculations are carried out to validate these models and to provide further information on the production of disturbance vorticity. All instabilities are interpreted as arising from the interaction between two vorticity waves. Depending on the type of stratification, these two waves are produced by different physical mechanisms. When both strong density and viscosity stratifications are present, we show that they result from the concurrent action of shear and inertial baroclinic effects. The stability models developed for simple fluid models ultimately shed light on a recently observed unstable mode in supercritical fluids (Ren et al., J. Fluid Mech., vol. 871, 2019, pp. 831-864), providing a quantitative prediction of the stability diagram and identifying the dominant mechanisms at play. Furthermore, our study suggests that the minimum of kinematic viscosity reached at the Widom line in these fluids is the leading cause of their instability. The existence of similar instabilities in different fluids and flows (e.g., miscible fluids) is finally discussed.

Factors influencing delivery-related complications and their consequences in hard-to-reach areas of Bangladesh.

BACKGROUND AND OBJECTIVES: Bangladesh's high maternal mortality ratio is exacerbated by delivery-related complications, particularly in hard-to-reach (HtR) areas with limited healthcare access. Despite this, few studies have explored delivery-related complications and factors contributing to these complications among the disadvantaged population. This study aimed to investigate the factors contributing to delivery-related complications and their consequences among the mothers residing in the HtR areas of Bangladesh. METHODS: Data were collected using a cross-sectional study design from 13 HtR sub-districts of Bangladesh between September 2019 and October 2019. Data from 1,290 recently delivered mothers were analysed. RESULTS: Around 32% (95% CI: 29.7-34.8) of the mothers reported at least one delivery-related complication. Prolonged labour pain (21%) was the highest reported complication during the delivery, followed by obstructive labour (20%), fever (14%), severe headache (14%). Mothers with higher education, a higher number of antenatal care (ANC) visits, complications during ANC, employed, and first-time mothers had higher odds of reporting delivery-related complications. More than one-half (51%) of these mothers had normal vaginal delivery. Nearly one-fifth (20%) of mothers who reported delivery-related complications were delivered by unskilled health workers at homes. On the other hand, about one-fifth (19%) of the mothers without any complications during delivery had a caesarean delivery. Nine out of ten of these caesarean deliveries were done at the private facilities. CONCLUSION: Delivery-related complications are significantly related to a woman's reproductive history and other background characteristics. Unnecessary caesarean delivery is prominent at private facilities.

Synergism in carbon nanotubes and carbon-dots: counter electrode of a high-performance dye-sensitized solar cell.

Dye-sensitized solar cells (DSSCs) play a crucial role in the realm of renewable energy technology by converting solar energy into electrical energy in an efficient and cost-effective way. In the pursuit of improving the photoconversion efficiency (PCE) of DSSCs, this work aims at fabricating a new counter electrode (CE) using a binary composite of heteroatom-doped carbon dots (C-dots) and functionalized multi-walled carbon nanotubes (o-MWCNTs). We demonstrate that this binary composite exhibits superior performance to pristine o-MWCNTs, resulting in a remarkable enhancement in the PCE. The PCE of the o-MWCNT/C-dots composite was measured at an impressive 4.28%, significantly outperforming the pristine o-MWCNT electrode, which yielded an efficiency of 2.24%. The enhanced performance of the o-MWCNT/C-dots composite can be attributed to the synergistic effects of heteroatom-doped C-dots since their binding to the o-MWCNTs by activated oxygenic surface functional groups increases the surface area from 218 to 253 m2 g-1. This enhanced surface area results from the reduction of π-π stacking interactions of the individual tubes and production of a new hollow channel in the structure that provides an ideal scaffold for I2 adsorption and electron transfer. We demonstrate the role of C-dots on MWCNT's property modulation toward higher PCE by density functional theory (DFT) calculation and electrochemical analysis. Electron-excess N and S doped C-dots exhibit strong catalytic activity, allowing for rapid electron transfer processes in the CE-electrolyte surface via the donor acceptor mechanism, whereas electron-deficient B doped C-dots undermine the cell performance by forming a charge recombination trap at the CE surface. The synthesized composite has higher redox reversibility up to 100 CV cycles and chemical stability, studied by the post-performance material characterization. The findings offer a promising avenue for the development of high-performance DSSCs, which will help to promote sustainable and renewable energy technologies.