A Novel Electromechanical Intramedullary Nail System for Limb Lengthening.

Background/Purpose of the Study: Many methods have been developed to treat leg length discrepancies. Extensible intramedullary nails are the most commonly used systems. However, complications such as excessive distraction, blockage of the nail, aditional surgery, uncontrolled lengthening and much pain occur during the use of these systems, and the desired success rate cannot be achieved. This study aims to develop a new extensible intramedullary system with two mechanisms (electronical and mechanical) for femur and tibia that treats leg length inequalities in a way that allows lengthening without complications as much as possible and does not require a second surgical intervention. It was planned to perform basic mechanical and cadaver functional tests of the new system, which will be designed and developed for this purpose. Methods: The 3D design of the system has been completed with 3D computer software. A compact system has been developed that is mechanically activated by sudden axial loading and electronically activated by a controllable electric motor. Basic mechanical and functional tests of the new system have been performed within a cadaver. Results: The rapid prototype of the system with electronical and mechanical units has been produced. As a result of the mechanical tests (axial loading), the nail was found to be resistant to compression forces. Its application to the cadaver and function tests was successfully performed. Conclusions: We believe that the system we have developed will have advantages, such as working principle, ease of application, controlled lengthening, patient mobility compared to existing leg lengthening methods. The success of the system in practice will be evaluated by in-vivo animal experiments after more detailed mechanical experiments on cadavers. According to the results, it will be ready for human use by performing necessary restorations.

Fabrication of Helix aspersa Extract Loaded Gradient Scaffold with an Integrated Architecture for Osteochondral Tissue Regeneration: Morphology, Structure, and In Vitro Bioactivity.

Regeneration of osteochondral tissue with its layered complex structure and limited self-repair capacity has come into prominence as an application area for biomaterial design. Thus, literature studies have aimed to design multilayered scaffolds using natural polymers to mimic its unique structure. In this study, fabricated scaffolds are composed of transition layers both chemically and morphologically to mimic the gradient structure of osteochondral tissue. The aim of this study is to produce gradient chitosan (CHI) scaffolds with bioactive snail (Helix aspersa) mucus (M) and slime (S) extract and investigate the structures regarding their physicochemical, mechanical, and morphological characteristics as well as in vitro cytocompatibility and bioactivity. Gradient scaffolds (CHI-M and CHI-S) were fabricated via a layer-by-layer freezing and lyophilization technique. Highly porous and continuous 3D structures were obtained and observed with SEM analysis. In addition, scaffolds were physically characterized with water uptake test, micro-CT, mechanical analysis (compression tests), and XRD analysis. In vitro bioactivity of scaffolds was investigated by co-culturing Saos-2 and SW1353 cells on each compartment of gradient scaffolds. Osteogenic activity of Saos-2 cells on extract loaded gradient scaffolds was investigated in terms of ALP secretion, osteocalcin (OC) production, and biomineralization. Chondrogenic bioactivity of SW1353 cells was investigated regarding COMP and GAG production and observed with Alcian Blue staining. Both mucus and slime incorporation in the chitosan matrix increased the osteogenic differentiation of Saos-2 and SW1353 cells in comparison to the pristine matrix. In addition, histological and immunohistological staining was performed to investigate ECM formation on gradient scaffolds. Both characterization and in vitro bioactivity results indicated that CHI-M and CHI-S scaffolds show potential for osteochondral tissue regeneration, mimicking the structure as well as enhancing physical characteristics and bioactivity.

Loofah-chitosan and poly (-3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) based hydrogel scaffolds for meniscus tissue engineering applications.

The meniscus is a fibrocartilaginous tissue that is very important for the stability of the knee joint. However, it has a low ability to heal itself, so damage to it will always lead to articular cartilage degeneration. The goal of this study was to make a new type of meniscus scaffold made of chitosan, loofah mat, and PHBV nanofibers, as well as to describe hydrogel composite scaffolds in terms of their shape, chemical composition, mechanical properties, and temperature. Three different concentrations of genipin (0.1, 0.3, and 0.5 %) were used and the optimal crosslinker concentration was 0.3 % for Chitosan/loofah (CL) and Chitosan/loofah/PHBV fiber (CLF). Scaffolds were seeded using undifferentiated MSCs and incubated for 21 days to investigate the chondrogenic potential of hydrogel scaffolds. Cell proliferation analyses were performed using WST-1 assay, GAG content was analyzed, SEM and fluorescence imaging observed morphologies and cell attachment, and histological and immunohistochemical studies were performed. The in vitro analysis showed no cytotoxic effect and enabled cells to attach, proliferate, and migrate inside the scaffold. In conclusion, the hydrogel composite scaffold is a promising material for engineering meniscus tissue.

Effects of degree of translation or rotation of acetabular fragment of periacetabular osteotomy procedure on pelvic X-ray parameters.

The present study aims to investigate the effect of amount of lateralization and/or anteversion of the point where the iliac cut meets with the posterior column cut of periacetabular osteotomy (PAO), on X-ray parameters such as Center of edge (CE) angle, retroversion index (RVI) and sharp angle. Fourteen patients with symptomatic hip dysplasia (CE° < 20°) were included. Pelvis Computerized tomography (CT) sections were used for 3D printing. PAO was then performed on these models. The point (A), 1 cm lateral to the pelvic brim, is marked where the iliac cut intersects the posterior column cut. In Group I (1.5-0), point A is lateralized parallel to the osteotomy line for 1.5 cm. In Group II (1.5-0.5), it is additionally anteverted for 0.5 cm. In Group III (3-0), point A is lateralized for 3 cm and then additionally anteverted for 1 cm (Group IV: 3-1). Radiographs were taken in each stage. The lateral CE angle, RVI and sharp angle were measured. All had an increase in the CE angle and RVI and a decrease in the sharp angle compared to the control group (P < 0.05). The amount of CE angle (ΔCE) or RVI increase (ΔRV) was as follows: 3-1(38°, 0.3) > 3-0(27°, 0.2) and 1.5-0.5(25°, 0.1) > 1.5-0(17°, 0.07) (P < 0.05) (with no difference between groups 1.5-0.5 and 3-0, P = 0.7). The amount of sharp angle decrease was as follows: 3-1(20°), 3-0(18°) < 1.5-0.5(11°) < 1.5-0(8°) (P < 0.05). The lateralization of the intersection point where the iliac wing cut meets with the posterior column cut along the cut surface led to an increase of lateral cover and focal retroversion. Additional anteversion leads to further increases in those parameters, while groups 1.5-0.5 and 3-0 did not differ between.

Fabrication of 3D Printed poly(lactic acid) strut and wet-electrospun cellulose nano fiber reinforced chitosan-collagen hydrogel composite scaffolds for meniscus tissue engineering.

The main goal of the study was to produce chitosan-collagen hydrogel composite scaffolds consisting of 3D printed poly(lactic acid) (PLA) strut and nanofibrous cellulose for meniscus cartilage tissue engineering. For this purpose, first PLA strut containing microchannels was incorporated into cellulose nanofibers and then they were embedded into chitosan-collagen matrix to obtain micro- and nano-sized topographical features for better cellular activities as well as mechanical properties. All the hydrogel composite scaffolds produced by using three different concentrations of genipin (0.1, 0.3, and 0.5%) had an interconnected microporous structure with a swelling ratio of about 400% and water content values between 77 and 83% which is similar to native cartilage extracellular matrix. The compressive strength of all the hydrogel composite scaffolds was found to be similar (∼32 kPa) and suitable for cartilage tissue engineering applications. Besides, the hydrogel composite scaffold comprising 0.3% (w/v) genipin had the highest tan δ value (0.044) at a frequency of 1 Hz which is around the walking frequency of a person. According to the in vitro analysis, this hydrogel composite scaffold did not show any cytotoxic effect on the rabbit mesenchymal stem cells and enabled cells to attach, proliferate and also migrate through the inner area of the scaffold. In conclusion, the produced hydrogel composite scaffold holds great promise for meniscus tissue engineering.

Computational analysis of the effects of interprosthetic distance on normal and reduced cortical thickness femur models.

Distal femoral fractures associated with the femoral stem in a well-fixed hip arthroplasty pose a risk of an interprosthetic fracture, the treatment of which is known as difficult. To effectively prevent and treat IP fractures, biomechanical effects must be demonstrated. We defined eight variations of the interprosthetic distance ranging from 48 mm overlap to 128 mm gap. Femoral geometries with normal and reduced cortical thickness were modeled to evaluate the effects of cortical thickness. In addition to the intact model, a total of 16 finite element models were analyzed under physiological boundary conditions. Maximum and minimum principal strains on the lateral and medial cortex surfaces were always found to be greater in models with reduced cortical thickness than in normal femurs. The model with 48 mm overlapping interprosthetic distance produced the least peak strain and the model with 16 mm interprosthetic gap produced the greatest strain with both normal and reduced cortical thickness. The screw holes produced local strain concentrations and increased the peak strains on the cortex surfaces, especially close to the stem tip. Statistically, a significant correlation (R2 = 0.9483) was found between strain shielding and interprosthetic distance. Axial stiffness, interfragmentary shear motion, and maximum von-Mises stress on the distal plate showed a high correlation with the interprosthetic distance. It was concluded that the overlapping structures are superior to other fixations we analyzed in that they offer better mechanical stability and eliminates the local strain concentrations.

Bony landmarks, distances and their correlations to each other, which can be used during periacetabular osteotomy: a CT study performed on dysplastic hips.

As a surgical technique for hip dysplasia, Bernese periacetabular osteotomy (PAO) still poses technical difficulties and unclear surgical steps like the depth of the first 'ischial' cut, the start of the iliac cut and the width of the retroacetabular cut to prevent either iatrogenic joint entrance or posterior column fracture. Twenty-seven dysplastic hips (CE < 25°) were randomly matched with nondysplastic hips (n: 27, CE > 25°). 3D CT sections of the hips were evaluated and the width of the ischium, the distance from the infra-acetabular groove to the ischial spine, from the anterior superior iliac spine (ASIS) to the joint or sciatic notch or the sciatic spine, from the most medial point at the acetabulum to the posterior column, ischial spine or sciatic notch were measured for each group and correlated. The distances (mm) from the infra-acetabular groove to the ischial spine (42 ± 4, 44 ± 4, P: 0.03), the anterior superior iliac spine to the joint (52 ± 6, 60 ± 3, P: 0.03), the most medial point at the acetabulum to the posterior column (34 ± 2, 36 ± 2, P: 0.005) were shorter in the dysplastic group. The distance from the ASIS to the sciatic notch was correlated with the distance from the infra-acetabular groove to the ischial spine, from the ASIS to the joint and the most medial point at the acetabulum to the posterior column. The distance from the ASIS to the sciatic notch can be used intraoperatively to guess the X-ray guided or blindly osteotomized stages to predict the width or depth of the osteotomy to prevent intraarticular extension or posterior column fracture.

Scapular spine base fracture with long outside-in superior or posterior screws with reverse shoulder arthroplasty.

BACKGROUND: The purpose of the present study was to determine how long superior screws alone or in combination with posterior placement of metaglene screws protruding and penetrating into the scapular spine in reverse total shoulder arthroplasty affect the strength of the scapular spine in a fresh cadaveric scapular model. METHODS: Seven fresh cadaver scapulas were allocated to the control group (short posterior and superior screws) and seven scapulars to the study group (spine base fixation with a four long screws, three with both long superior and long posterior screws). RESULTS: The failure load was lower in the spine fixation group (long screw, 869 N vs. short screw, 1,123 N); however, this difference did not reach statistical significance (p>0.05). All outside-in long superior or superior plus posterior screws failed due to scapular spine base fracture; failures in the short screw group were due to acromion fracture. An additional posterior outside-in screw failed to significantly decrease the failure load of the acromion spine. CONCLUSIONS: The present study highlights the significance of preventing a cortical breach or an outside-in configuration when a superior or posterior screw is inserted into the scapular spine base.

Bioactive snail mucus-slime extract loaded chitosan scaffolds for hard tissue regeneration: the effect of mucoadhesive and antibacterial extracts on physical characteristics and bioactivity of chitosan matrix.

Biobased extracts comprise various bioactive components and they are widely used in tissue engineering applications to increase bioactivity as well as physical characteristics of biomaterials. Among animal sources, garden snailHelix aspersahas come into prominence with its antibacterial and regenerative extracts and show potential in tissue regeneration. Thus, in this study, bioactiveH. aspersaextracts (slime, mucus) were loaded in chitosan (CHI) matrix to fabricate porous scaffolds for hard tissue regeneration. Physical, chemical properties, antimicrobial activity was determined as well asin vitrobioactivity for bone and cartilage regeneration. Mucus and slime incorporation enhanced mechanical properties and biodegradation rate of CHI matrix. Scanning electron microscopy images showed that the average pore size of the scaffolds decreased with higher extract content. Mucus and slime extracts showed antimicrobial effect on two bacterial strains.In vitrocytotoxicity, osteogenic and chondrogenic activity of the scaffolds were evaluated with Saos-2 and SW1353 cell lines in terms of Alkaline phosphatase activity, biomineralization, GAG, COMP and hydroxyproline content. Cell viability results showed that extracts had a proliferative effect on Saos-2 and SW1353 cells when compared to the control group. Mucus and slime extract loading increased osteogenic and chondrogenic activity. Thus, the bioactive extract loaded CHI scaffolds showed potential for bone and cartilage regeneration with enhanced physical properties andin vitrobioactivity.

Three-Dimensionally-Printed Joint-Preserving Prosthetic Reconstruction of Massive Bone Defects After Malignant Tumor Resection of the Proximal Tibia.

Joint-preserving prosthetic reconstruction for massive bone defects has the potential to be a new and revolutionary treatment option. In this paper, we discuss the case of a 30-year-old female patient who presented with pain and swelling around the knee for three months. The patient underwent this procedure. Postoperative patient satisfaction, pain scores, and range of motion results were found to be promising. We believe that this method has the potential to be the next stage in the quest for better treatment options for this condition.

Development of biological meniscus scaffold: Decellularization method and recellularization with meniscal cell population derived from mesenchymal stem cells.

Tissue engineering approaches which include a combination of cells and scaffold materials provide an alternative treatment for meniscus regeneration. Decellularization and recellularization techniques are potential treatment options for transplantation. Maintenance of the ultrastructure composition of the extracellular matrix and repopulation with cells are important factors in constructing a biological scaffold and eliminating immunological reactions.The aim of the study is to develop a method to obtain biological functional meniscus scaffolds for meniscus regeneration. For this purpose, meniscus tissue was decellularized by our modified method, a combination of physical, chemical, and enzymatic methods and then recellularized with a meniscal cell population composed of fibroblasts, chondrocytes and fibrochondrocytes that obtained from mesenchymal stem cells. Decellularized and recellularized meniscus scaffolds were analysed biochemically, biomechanically and histologically. Our results revealed that cellular components of the meniscus were successfully removed by preserving collagen and GAG structures without any significant loss in biomechanical properties. Recellularization results showed that the meniscal cells were localized in the empty lacuna on the decellularized meniscus, and also well distributed and proliferated consistently during the cell culture period (p < 0.05). Furthermore, a high amount of DNA, collagen, and GAG contents (p < 0.05) were obtained with the meniscal cell population in recellularized meniscus tissue.The study demonstrates that our decellularization and recellularization methods were effective to develop a biological functional meniscus scaffold and can mimic the meniscus tissue with structural and biochemical features. We predict that the obtained biological meniscus scaffolds may provide avoidance of adverse immune reactions and an appropriate microenvironment for allogeneic or xenogeneic recipients in the transplantation process. Therefore, as a promising candidate, the obtained biological meniscus scaffolds might be verified with a transplantation experiment.

A comparison of ice wrap and subacromial injection for postoperative pain and edema control following arthroscopic rotator cuff repair.

BACKGROUND: Postoperative pain and edema are the most common problems associated with arthroscopic rotator cuff repair. The purpose of the present study was to compare ice wrap and subacromial injection (SI) as treatments for early postop pain and edema control and to contrast them with a control group. MATERIALS AND METHODS: 59 patients treated with arthroscopic rotator cuff repair were randomized into three groups: 23 patients who received an ice wrap, 20 patients who received a SI, and a control group of 16 patients. RESULTS: Patient demographics, comorbidities, tear retraction, degree of fatty muscle degeneration, surgical procedures, and amount of irrigation fluid were similar for the three groups, which also showed similar results regarding postoperative pain and edema control as well as analgesic consumption. CONCLUSIONS: The present study failed to show any difference in effectiveness between the two most common pain management modalities, or between those modalities and the control group. LEVEL OF EVIDENCE: IV, prospective observational study.

Cadmium in bone cement induces necrosis and decreases the viability of residual osteosarcoma cells: A xenograft study.

OBJECTIVE: The aim of this study was to show whether local application of cadmium-impregnated bone cement can induce apoptosis and decrease the viability of residual osteosarcoma (OS) cells in nude mice. METHODS: K7M2 tumorigenic OS cell line was cultivated in vitro. The xenograft tumor model was formed by subcutaneously adding the tumor cells to athymic nude mice. Tumor was formed within 1 month. Then, mice were randomly assigned to five groups, each containing seven nude mice: control (group 1), wide resection (group 2), intralesional resection (group 3), intralesional resection + bone cement (group 4), and intralesional resection + cadmium embedded in bone cement (group 5). Tumor resection with 1 cm surgical margins was performed in the wide resection group. In intralesional resection groups, tumor tissue was resected with positive margins aiming to leave 15 mm3 of macroscopic tumor tissue. In group 3, the defect was left empty; groups 4 and 5 received bone cements prepared with saline and cadmium solutions, respectively. After the resection, mice were observed for 15 days and sacrificed. Next, surgical resection sites were evaluated histopathologically in each group. RESULTS: Recurrent tumor was formed in all mice in the wide resection group, and apparent progression of residual tumor was observed in groups 3 and 4. On the contrary, only a thin layer of residual tumor was observed around the bone cement in group 5. Histological evaluation revealed remarkable necrosis in group 5 and lowest viability compared to other groups. No systemic toxic effect related to cadmium was observed. CONCLUSION: Our data suggest that local application of cadmium in bone cement has a significant potential to increase tumor necrosis and decrease the viability of residual OS cells.

Bare area on the trochanter and its correlations to gluteal tendon insertion dimensions.

Gluteus medius and minimus tears have recently been reported to be very common and the main etiology of lateral sided hip pain. The purpose of this study was to determine whether there is any correlation between the dimensions of the tendon insertions and bare areas (BA) and various bony landmarks. Twenty-seven hemipelvises from adult male hips were included. The bony landmarks [anterior tip (Ta), posterior tip of trochanter, vastus tubercle (VT) and center of BA] were marked. The longitudinal lengths and widths (maximum) of posterosuperior (PS), lateral facets (LF), minimus insertion (Min) and BA and the distance between posterior (Tp) and Ta and between anterior/posterior tips and the VT or center of BA were measured using a digital caliper. A correlation analysis was performed between variables. There was a correlation between LFlength and Minlength (r = 0.4, P = 0.01) and between Ta-BA and PS + LF (r = 0.5, P = 0.003) or Minlength (r = 0.4, P = 0.016). LFwidth was negatively correlated with BAwidth (r = -0.4, P = 0.002). Tp-BA was negatively correlated with BAwidth (r = -0.4, P = 0.01). LFwidth was correlated with Tp-BA, and this nearly reached statistical significance (r = 0.3, P = 0.05). BA can be used intraoperatively as landmarks to estimate the width of the LF and also to determine the length of the longitudinal insertion of the gluteus medius and minimus tendons.

Cosmetic bilateral leg lengthening using intramedullary nail experience of 9 cases.

BACKGROUND: Distraction osteogenesis to correct deformity and limb-length discrepancy was defined by Ilizarov. Traditional distraction osteogenesis was made with circular external fixators or monolateral fixators commonly for deformity, and external fixators was related with pin site infections and pain due to soft-tissue transfixation. Nowadays, bone lengthening method is used with different intramedullary nail systems for cosmetic purposes. METHODS: From 2011 until 2018, a total of 9 patients (6 males and 3 females:16 femoral, 2 tibial), with constitutional short stature, to whom the intramedullary nail lengthening technique for cosmetic purposes had been applied, were retrospectively reviewed. The mean age was 28.3 while the mean height before the lengthening was 151 cm. RESULT: The mean lengthening gained in all patients were 8.7 cm. The mean follow-up period was 22 ± 11 months while the healing index with normal bone healing was 46.8 ± 16 months/cm. Complications that we noted were; insufficient bone regeneration (n = 2), quadriceps contracture (n = 1), proximal locking screw runaway (n = 1). CONCLUSION: Bone lengthening for aesthetic purposes with different nail systems can be very safe and beneficial to the patients improving their social capabilities and self-confidence. Yet, patients should be well informed about the complications and risks of the lengthening surgery.

Comparison of Biomechanical Properties of Dura Mater Substitutes and Cranial Human Dura Mater : An In Vitro Study.

OBJECTIVE: The aim of this study was to investigate the biomechanical differences between human dura mater and dura mater substitutes to optimize biomimetic materials. METHODS: Four groups were investigated. Group I used cranial dura mater (n=10), group II used Gore-Tex® Expanded Cardiovascular Patch (W.L. Gore & Associates Inc., Flagstaff, AZ, USA) (n=6), group III used Durepair® (Medtronic Inc., Goleta, CA, USA) (n=6), and group IV used Tutopatch® (Tutogen Medical GmbH, Neunkirchen am Brand, Germany) (n=6). We used an axial compression machine to measure maximum tensile strength. RESULTS: The mean tensile strengths were 7.01±0.77 MPa for group I, 22.03±0.60 MPa for group II, 19.59±0.65 MPa for group III, and 3.51±0.63 MPa for group IV. The materials in groups II and III were stronger than those in group I. However, the materials in group IV were weaker than those in group I. CONCLUSION: An important dura mater graft property is biomechanical similarity to cranial human dura mater. This biomechanical study contributed to the future development of artificial dura mater substitutes with biomechanical properties similar to those of human dura mater.

Ipsilateral hip pain and femoral shaft fractures: is there any relationship?

BACKGROUND: High-energy traumas are common occurrences worldwide. The rate of overlooked neck fractures in polytrauma cases is also high. Previous studies have shown that articular hip pathologies, particularly neck fractures, are associated with fractures of the femoral shaft. This study sets out to describe cases of intra-articular hip pathology following traumatic femoral shaft fracture. Thus, the present study aims to investigate the relationship between ipsilateral hip pain and femoral shaft fractures. METHODS: Patients who were diagnosed with a fracture of the femur shaft and who were operated on (intramedullary fixation or plate) were included in this study. Patients with pathologic fractures, femoral neck fractures, femoral intertrochanteric fractures, or pelvic fractures were excluded. Patients with at least six months of follow-up and who were capable of independent walking without support were grouped according to AO/OTA fracture classification. Patients were questioned for deep anterior groin pain, and physical examination tests and hip imaging (X-ray and MR arthrography) were performed by calling patients with the indicated complaints. RESULTS: The presence of labral tears were noted in two patients. The incidence of osseous bump of the femoral neck identified by MR arthrography (MRA) was found in three of 16 hips. Assessment of the presence of gluteal tendinosis or tear and herniation pit identified three of 16 hips. The presence of osteophytes was noted in one patient. MRA identified three of 16 hips with more than one type of intra-articular pathology. Two patients with an osseous bump of the femoral neck were also diagnosed with additional hip pathology as herniation pit. CONCLUSION: Anterior groin pain in patients with a history of femoral shaft fracture is not always related to implants. Orthopedic surgeons should become suspicious in cases of intra-articular hip pathology in patients who have persistent hip pain after severe lower extremity trauma.

Suture anchor fixation strength in the Latarjet procedure: a biomechanical study in cadavers.

BACKGROUND: The use of metallic screws for graft fixation during the Latarjet procedure is not devoid of complications. The purpose of the present cadaver study was to determine the initial strength of coracoid graft fixation using suture anchors and compare it to that of the traditional screw fixation of the graft using a fresh frozen human shoulder cadaver model. MATERIALS AND METHODS: Twelve unpaired fresh frozen cadaver shoulders were utilized. In the first group, suture anchor fixation of the graft was used, while 3.75-mm cannulated screws were used in the second group. The specimens were then cyclically loaded from 5 to 150 N at a speed of 0.05 mm/s for 100 cycles. After cyclic loading, each specimen was then loaded at a constant rate of 0.5 mm/s until 7 mm of displacement. Cyclic elongation, peak-to-peak displacement, stiffness and maximum load were measured. RESULTS: There were no significant differences between the traditional screw fixation and fixation using suture anchors in elongation, peak-to-peak displacement, stiffness and maximum load. CONCLUSIONS: In this study, traditional screw fixation and fixation using suture anchors did not significantly affect biomechanical performance in a classic Latarjet procedure.