Fluorinated tetrapodal anion transporters.

Synthetic anion transporters show potential in treating life-threatening diseases like cystic fibrosis and cancer. However, with increasingly complex transporter architectures designed to control anion binding and transport, it is important to consider solubility and deliverability during transporter design. The fluorination of synthetic anion transporters has been shown to tune the transporter lipophilicity, transport rates, and binding strength. In this work, we expand on our previously reported tetrapodal (thio)urea transporters with a series of fluorinated tetrapodal anion transporters. The effects of fluorination on tuning the lipophilicity, solubility, deliverability, and anion transport selectivity of the tetrapodal scaffold were investigated using anion-binding and transport assays. The primary mode of anion transport was H+/X- cotransport, with the most fluorinated tetrathiourea (8) displaying the highest transport activity in the 8-hydroxypyrene-1,3,6-trisulfonic acid (HPTS) assay. Intriguingly, inversion of the transmembrane Cl- vs NO3 - transport selectivity compared with previously reported tripodal (thio)urea transporters was observed under a modified HPTS assay.

The role of adjuvants in overcoming antibacterial resistance due to enzymatic drug modification.

Antibacterial resistance is a prominent issue with monotherapy often leading to treatment failure in serious infections. Many mechanisms can lead to antibacterial resistance including deactivation of antibacterial agents by bacterial enzymes. Enzymatic drug modification confers resistance to ß-lactams, aminoglycosides, chloramphenicol, macrolides, isoniazid, rifamycins, fosfomycin and lincosamides. Novel enzyme inhibitor adjuvants have been developed in an attempt to overcome resistance to these agents, only a few of which have so far reached the market. This review discusses the different enzymatic processes that lead to deactivation of antibacterial agents and provides an update on the current and potential enzyme inhibitors that may restore bacterial susceptibility.

Discovery of 2',6-Bis(4-hydroxybenzyl)-2-acetylcyclohexanone, a Novel FtsZ Inhibitor.

Multi-drug resistance is increasing in the pathogenic bacterium S. pneumoniae, which is mainly responsible for meningitis and community-acquired pneumonia (CAP), highlighting the need for new anti-pneumococcal agents. We have identified a potential anti-pneumococcal agent, enol 3, which acts by hindering the cell division process by perturbing Z-ring dynamics inside the cell. Enol 3 was also shown to inhibit FtsZ polymerization and induce its aggregation in vitro but does not affect the activity of tubulin and alkaline phosphatase. Docking studies show that 3 binds near the T7 loop, which is the catalytic site of FtsZ. Similar effects on Z-ring and FtsZ assembly were observed in B. subtilis, indicating that 3 could be a broad-spectrum anti-bacterial agent useful in targeting Gram-positive bacteria. In conclusion, compound 3 shows strong anti-pneumococcal activity, prompting further pre-clinical studies to explore its potential.

An experimental and theoretical charge density study of theophylline and malonic acid cocrystallization.

The pharmaceutical agent theophylline (THEO) is primarily used as a bronchodilator and is commercially available in both tablet and liquid dosage forms. THEO is highly hygroscopic, reducing its stability, overall shelf-life, and therefore usage as a drug. THEO and dicarboxylic acid cocrystals were designed by Trask et al. in an attempt to decrease the hygroscopic behaviour of THEO; cocrystallisation of THEO with malonic acid (MA) did not improve the hygroscopic stability of THEO in simulated atmospheric humidity testing. The current study employed high-resolution X-ray crystallography, and Density Functional Theory (DFT) calculations to examine the electron density distribution (EDD) changes between the cocrystal and its individual components. The EED changes identified the reasons why the THEO:MA cocrystal did not alter the hygroscopic profile of THEO. The cocrystal was equally porous, with atomic packing factors (APF) similar to those of THEO 0.73 vs. 0.71, respectively. The THEO:MA (1) cocrystal structure is held together by an array of interactions; a heterogeneous synthon between the imidazole and a carboxylic fragment stabilising the asymmetric unit, a pyrimidine-imidazole homosynthon, and an aromatic cycle stack between two THEO moieties have been identified, providing 9.7-12.9 kJ mol-1 of stability. These factors did not change the overall relative stability of the cocrystal relative to its individual THEO and MA components, as shown by cocrystal (1) and THEO being equally stable, with calculated lattice energies within 2.5 kJ mol-1 of one other. The hydrogen bond analysis and fragmented atomic charge analysis highlighted that the formation of (1) combined both the EDD of THEO and MA with no net chemical change, suggesting that the reverse reaction - (1) back to THEO and MA - is of equal potential, ultimately producing THEO hydrate formation, in agreement with the work of Trask et al. These results highlight that a review of the EDD change associated with a chemical reaction can aid in understanding cocrystal design. In addition, they indicate that cocrystal design requires further investigation before becoming a reliable process, with particular emphasis on identifying the appropriate balance of synthon engineering, weak interactions, and packing dynamics.

Exploring the excited-state charge transfer fluorescence profile of 7-hydroxycoumarin and 2-methylimidazole - a combined X-ray diffraction and theoretical approach.

This study investigated the effect of 2-methylimidazole (2-MIM) addition on the fluorescence of ethyl-7-hydroxy-2-oxo-2H-chromene-3-carboxylate using low-cost density functional theory (DFT) and Time-Dependent DFT calculations on single crystal X-ray geometries of ethyl-7-hydroxy-2-oxo-2H-chromene-3-carboxylate hydrate (1), 2-MIM (2), and the 1 : 1 co-crystal of (1) and (2), (3). At low concentrations (1 : 1-1 : 10) of 2-MIM, the fluorophore shows a decrease in the fluorescence intensity, but at higher concentrations (above 1 : 10) the fluorescence excitation maximum shifted from 354 nm to 405 nm, with a significant emission intensity increase. The changed excitation and emission profile at high concentrations is due to the deprotonation of the coumarin's phenolic group, which was confirmed by the increased shielding of the aromatic protons in the titration 1H NMR spectra. The experimental fluorescence data between the 1 : 1 and 1 : 10 ratios agreed with the theoretical fluorescence data, with a redshift and decreased intensity when comparing (1) and (3). The data indicated that combining the fluorophore with 2-MIM increased levels of vibronic coupling between 2-MIM and the fluorophore decreasing de-excitation efficiency. These increased vibronic changes were due to charge transfer between the fluorophore and 2-MIM in (3). The subtle movement of the proton, H(5) toward N(2') (0.07 Å) caused a significant decrease in fluorescence due to electron density distribution (EDD) changes. This was identified by comparison of the EDD in the excited (S1) and ground (S0) states plotted as an isosurface of EDD difference. For the higher concentrations, an alternative excitation pathway was explored by modifying the crystal geometry of (3) based on 1H NMR spectroscopy data to resemble excitoplexes. Theses excitoplex geometries reflected the fluorescence profile of the fluorophore with high concentrations of 2-MIM; there were dramatic changes in the theoretical fluorescence pathway, which was 100% vibronic coupling compared to 15.31% in the free fluorophore. At this concentration, the de-excitation pathway causes remodelling of the lactone ring via stretching/breaking the CO bond in the S1 causing increased fluorescence by movement of the transition dipole moment. These results reflect previous studies, but the methods used are less experimentally and computationally expensive. This study is among the first to explain charge transfer fluorescence using crystalline geometries. This study will be of interest to the fields of crystal engineering and fluorescence spectroscopy.

A Guide to In Silico Drug Design.

The drug discovery process is a rocky path that is full of challenges, with the result that very few candidates progress from hit compound to a commercially available product, often due to factors, such as poor binding affinity, off-target effects, or physicochemical properties, such as solubility or stability. This process is further complicated by high research and development costs and time requirements. It is thus important to optimise every step of the process in order to maximise the chances of success. As a result of the recent advancements in computer power and technology, computer-aided drug design (CADD) has become an integral part of modern drug discovery to guide and accelerate the process. In this review, we present an overview of the important CADD methods and applications, such as in silico structure prediction, refinement, modelling and target validation, that are commonly used in this area.

Understanding Hygroscopicity of Theophylline via a Novel Cocrystal Polymorph: A Charge Density Study.

The charge density distribution in a novel cocrystal (1) complex of 1,3-dimethylxanthine (theophylline) and propanedioic acid (malonic acid) has been determined. The molecules crystallize in the triclinic, centrosymmetric space group P1̅, with four independent molecules (Z = 4) in the asymmetric unit (two molecules each of theophylline and malonic acid). Theophylline has a notably high hygroscopic nature, and numerous cocrystals have shown a significant improvement in stability to humidity. A charge density study of the novel polymorph has identified interesting theoretical results correlating the stability enhancement of theophylline via cocrystallization. Topological analysis of the electron density highlighted key differences (up to 17.8) in Laplacian (∇2ρ) between the experimental (EXP) and single-point (SP) models, mainly around intermolecular-bonded carbonyls. Further investigation via molecular electrostatic potential maps reaffirmed that the charge redistribution enhanced intramolecular hydrogen bonding, predominantly for N(2') and N(2) (61.2 and 61.8 kJ mol-1, respectively). An overall weaker lattice energy of the triclinic form (-126.1 kJ mol-1) compared to that of the monoclinic form (-133.8 kJ mol-1) suggests a lower energy threshold to overcome to initiate dissociation. Future work via physical testing of the novel cocrystal in both dissolution and solubility will further solidify the correlation between theoretical and experimental results.

Delivering anion transporters to lipid bilayers in water.

Cyclodextrins have been employed as delivery agents for lipophilic anion transporters, which allow their incorporation into lipid bilayers without using an organic solvent or pre-incorporation.