Real-time CT image generation based on voxel-by-voxel modeling of internal deformation by utilizing the displacement of fiducial markers.

PURPOSE: To show the feasibility of real-time CT image generation technique utilizing internal fiducial markers that facilitate the evaluation of internal deformation. METHODS: In the proposed method, a linear regression model that can derive internal deformation from the displacement of fiducial markers is built for each voxel in the training process before the treatment session. Marker displacement and internal deformation are derived from the four-dimensional computed tomography (4DCT) dataset. In the treatment session, the three-dimensional deformation vector field is derived according to the marker displacement, which is monitored by the real-time imaging system. The whole CT image can be synthesized by deforming the reference CT image with a deformation vector field in real-time. To show the feasibility of the technique, image synthesis accuracy and tumor localization accuracy were evaluated using the dataset generated by extended NURBS-Based Cardiac-Torso (XCAT) phantom and clinical 4DCT datasets from six patients, containing 10 CT datasets each. In the validation with XCAT phantom, motion range of the tumor in training data and validation data were about 10 and 15 mm, respectively, so as to simulate motion variation between 4DCT acquisition and treatment session. In the validation with patient 4DCT dataset, eight CT datasets from the 4DCT dataset were used in the training process. Two excluded inhale CT datasets can be regarded as the datasets with large deformations more than training dataset. CT images were generated for each respiratory phase using the corresponding marker displacement. Root mean squared error (RMSE), normalized RMSE (NRMSE), and structural similarity index measure (SSIM) between the original CT images and the synthesized CT images were evaluated as the quantitative indices of the accuracy of image synthesis. The accuracy of tumor localization was also evaluated. RESULTS: In the validation with XCAT phantom, the mean NRMSE, SSIM, and three-dimensional tumor localization error were 7.5 ± 1.1%, 0.95 ± 0.02, and 0.4 ± 0.3 mm, respectively. In the validation with patient 4DCT dataset, the mean RMSE, NRMSE, SSIM, and three-dimensional tumor localization error in six patients were 73.7 ± 19.6 HU, 9.2 ± 2.6%, 0.88 ± 0.04, and 0.8 ± 0.6 mm, respectively. These results suggest that the accuracy of the proposed technique is adequate when the respiratory motion is within the range of the training dataset. In the evaluation with a marker displacement larger than that of the training dataset, the mean RMSE, NRMSE, and tumor localization error were about 100 HU, 13%, and <2.0 mm, respectively, except for one case having large motion variation. The performance of the proposed method was similar to those of previous studies. Processing time to generate the volumetric image was <100 ms. CONCLUSION: We have shown the feasibility of the real-time CT image generation technique for volumetric imaging.

Construction of transcription factor gene deletion library of Aspergillus luchuensis.

We selected 96 genes of Aspergillus luchuensis for the construction of a transcription factor gene deletion library. Of these, we successfully deleted 93 genes using Agrobacterium-mediated transformation (AMT) of A. luchuensis RIB 2604 ΔligD strains. We obtained only heterokaryonic strains after deletions of adaB, anBH1, hacA, hapB, hsf1, metR, and sonC gene, and additionally, could not obtain deletion strains for genes abaA and mcmA. The deletion strains will be available through our website (https://www.nrib.go.jp).

Awamori fermentation test and 1-octen-3-ol productivity analysis using fatty acid oxygenase disruptants of Aspergillus luchuensis.

1-Octen-3-ol is a major aroma component of awamori, a traditional distilled liquor produced in Okinawa Prefecture, Japan. As 1-octen-3-ol is thought to affect the sensory properties of awamori, it is important to fully characterize the compound's biosynthetic pathway and control mechanism. We previously reported that the fatty acid oxygenase ppoC (ppo: psi-produced oxygenase) of Aspergillus luchuensis is directly involved in the production of 1-octen-3-ol in rice koji (Kataoka et al., J. Biosci. Bioeng., 129, 192-198, 2020). In the present study, we constructed A. luchuensis ppoD disruptants to characterize the role of ppo genes in 1-octen-3-ol biosynthesis. A small-scale awamori fermentation test was performed using ppoA, ppoC, and ppoD single disruptants (ΔppoA, ΔppoC, and ΔppoD, respectively), along with the parent strain, ΔligD. 1-Octen-3-ol was not detected in the distillate prepared using the ΔppoC strain. We conclude that A. luchuensis ppoC is the only 1-octen-3-ol-producing factor in the awamori brewing process. Because ΔppoA and ΔppoD slightly enhanced 1-octen-3-ol productivity, these two genes may play a role in negatively controlling 1-octen-3-ol biosynthesis.

Influence of α-1,3-glucan synthase gene agsE on protoplast formation for transformation of Aspergillus luchuensis.

Aspergillus luchuensis NBRC4314 recently underwent genome sequencing. We have not used the frequently used protoplast-polyethylene glycol (PEG) method but have used agrobacterium-mediated transformation (AMT) to genetically engineer this strain because it was difficult to generate protoplasts using commercial cell wall lytic enzymes. In this study, we initially investigated the various conditions for protoplast formation in A. luchuensis. We found that A. luchuensis protoplasts could be generated using a minimal medium for the preculture medium, a static culture for the preculture condition, and Yatalase and α-1,3-glucanase as cell-wall lytic enzymes. These protoplasts could then be transformed with the protoplast-PEG method. Because α-1,3-glucanase was needed to form protoplasts in A. luchuensis, we investigated the role of the α-1,3-glucan synthase gene agsE in protoplast formation, one of five α-1,3-glucan synthase genes in A. luchuensis and a homolog of the major α-1,3-glucan synthase agsB in Aspergillus nidulans. We disrupted agsE in A. luchuensis (ΔagsE) with AMT and found that protoplast formation in ΔagsE was comparable with protoplast formation in Aspergillus oryzae with Yatalase. The ΔagsE protoplasts were also competent for transformation with the protoplast-PEG method. Hence, agsE appears to inhibit protoplast formation in A. luchuensis.

Molecular mechanism underlying pseudopeloria in Habenaria radiata (Orchidaceae).

Habenaria radiata (Orchidaceae) has two whorls of perianth, comprising three greenish sepals, two white petals and one lip (labellum). By contrast, the pseudopeloric (with a decreased degree of zygomorphy) mutant cultivar of H. radiata, 'Hishou', has changes in the identities of the dorsal sepal to a petaloid organ and the two ventral sepals to lip-like organs. Here, we isolated four DEFICIENS-like and two AGL6-like genes from H. radiata, and characterized their expression. Most of these genes revealed similar expression patterns in the wild type and in the 'Hishou' cultivar, except HrDEF-C3. The HrDEF-C3 gene was expressed in petals and lip in the wild type but was ectopically expressed in sepal, petals, lip, leaf, root and bulb in 'Hishou'. Sequence analysis of the HrDEF-C3 loci revealed that the 'Hishou' genome harbored two types of HrDEF-C3 genes: one identical to wild-type HrDEF-C3 and the other carrying a retrotransposon insertion in its promoter. Genetic linkage analysis of the progeny derived from an intraspecific cross between 'Hishou' and the wild type demonstrated that the mutant pseudopeloric trait was dominantly inherited and was linked to the HrDEF-C3 gene carrying the retrotransposon. These results indicate that the pseudopeloric phenotype is caused by retrotransposon insertion in the HrDEF-C3 promoter, resulting in the ectopic expression of HrDEF-C3. As the expression of HrAGL6-C2 was limited to lateral sepals and lip, the overlapping expression of HrDEF-C3 and HrAGL6-C2 is likely to be responsible for the sepal to lip-like identity in the lateral sepals of the 'Hishou' cultivar.

Development of a carboplatin derivative conjugated with a collagen-like triple-helical peptide.

AIM: The development of a platinum anticancer agent that has improved efficacy by efficient delivery to a tumor and that suppresses side effects has been investigated. Arginine-rich triple-helical peptides are promising drug carriers because of their stability in body fluids and cell-penetrating activity. RESULTS: We synthesized a carboplatin derivative conjugated with an arginine-rich triple-helical peptide. This derivative released platinum under acidic conditions or in the presence Cl- ions. Administration of this derivative to P388 tumor-bearing mice showed comparable survival rates to twice the dose of carboplatin, which was attributed to a longer mean residence time by pharmacokinetics analysis. CONCLUSION: The collagen-like triple-helical peptide was an efficient carrier of a platinum anticancer agent because of a modification to its pharmacokinetic profile.

Detailed analysis of targeted gene mutations caused by the Platinum-Fungal TALENs in Aspergillus oryzae RIB40 strain and a ligD disruptant.

Transcription activator-like effector nucleases (TALENs), which can generate DNA double-strand breaks at specific sites in the desired genome locus, have been used in many organisms as a tool for genome editing. In Aspergilli, including Aspergillus oryzae, however, the use of TALENs has not been validated. In this study, we performed genome editing of A. oryzae wild-type strain via error of nonhomologous end-joining (NHEJ) repair by transient expression of high-efficiency Platinum-Fungal TALENs (PtFg TALENs). Targeted mutations were observed as various mutation patterns. In particular, approximately half of the PtFg TALEN-mediated deletion mutants had deletions larger than 1 kb in the TALEN-targeting region. We also conducted PtFg TALEN-based genome editing in A. oryzae ligD disruptant (ΔligD) lacking the ligD gene involved in the final step of the NHEJ repair and found that mutations were still obtained as well as wild-type. In this case, the ratio of the large deletions reduced compared to PtFg TALEN-based genome editing in the wild-type. In conclusion, we demonstrate that PtFg TALENs are sufficiently functional to cause genome editing via error of NHEJ in A. oryzae. In addition, we reveal that genome editing using TALENs in A. oryzae tends to cause large deletions at the target region, which were partly suppressed by deletion of ligD.

Molecular biological researches of Kuro-Koji molds, their classification and safety.

To assess the position of Kuro-Koji molds in black Aspergillus, we performed sequence analysis of approximately 2500 nucleotides of partial gene fragments, such as histone 3, on a total of 57 Aspergillus strains, including Aspergillus kawachii NBRC 4308, 12 Kuro-Koji molds isolated from awamori breweries in Japan, Aspergillus niger ATCC 1015, and A. tubingensis ATCC10550. Sequence results showed that all black Aspergillus strains could be classified into 3 types, type N which includes A. niger ATCC 1015, type T which includes A. tubingensis ATCC 10550, and type L which includes A. kawachii NBRC 4308. Phylogenetic analysis showed these three types belong to different clusters. All 12 Kuro-Koji molds isolated from awamori breweries were classified as type L, thus we concluded type L represents the industrial Kuro-Koji molds. We found all type L strains lack the An15g07920 gene which is required for ochratoxin A biosynthesis in black Aspergillus. This sequence is present in the genome of A. niger CBS 513.88 and has homology to the polyketide synthase fragment of A. ochraceus which is involved in ochratoxin A biosynthesis. Based on the industrial importance and the safety of Kuro-Koji molds, we propose to classify the type L strains as Aspergillus luchuensis, as initially reported by Dr. Inui.

Development and significance of a fetal electrocardiogram recorded by signal-averaged high-amplification electrocardiography.

Although ultrasonic diagnostic imaging and fetal heart monitors have undergone great technological improvements, the development and use of fetal electrocardiograms to evaluate fetal arrhythmias and autonomic nervous activity have not been fully established. We verified the clinical significance of the novel signal-averaged vector-projected high amplification ECG (SAVP-ECG) method in fetuses from 48 gravidas at 32-41 weeks of gestation and in 34 neonates. SAVP-ECGs from fetuses and newborns were recorded using a modified XYZ-leads system. Once noise and maternal QRS waves were removed, the P, QRS, and T wave intervals were measured from the signal-averaged fetal ECGs. We also compared fetal and neonatal heart rates (HRs), coefficients of variation of heart rate variability (CV) as a parasympathetic nervous activity, and the ratio of low to high frequency (LF/HF ratio) as a sympathetic nervous activity. The rate of detection of a fetal ECG by SAVP-ECG was 72.9%, and the fetal and neonatal QRS and QTc intervals were not significantly different. The neonatal CVs and LF/HF ratios were significantly increased compared with those in the fetus. In conclusion, we have developed a fetal ECG recording method using the SAVP-ECG system, which we used to evaluate autonomic nervous system development.

[Development of three-dimensional analysis of current density distribution by 64-ch magentocardiography and clinical application].

Magnetocardiography (MCG) using a SQUID sensor is characterized by three dimensional cardiac electrical phenomena from magnetic fields, because it is hard to be affected by organ constitution of lungs and torso configuration. We have developed three-dimensional (3D) electric current density distribution analysis by a spatial filter method. At this symposium, we report clinical utility of 64-channel (64-ch) MCG. Subjects consisted of 20 normal volunteers, 10 cases with old myocardial infarction, 13 cases with atrial fibrillation (AFIB) who received surgical pulmonary (PV) isolation, and representative case with fetus premature ventricular complex (PVC). We recorded 10-min MCG data of magnetic field composition (a Bz ingredient) which was perpendicular to body surface in a magnetism shield, using 64-ch SQUID sensors (17.5 x 17.5 cm) built-in in MCG instrumentation(sampling; 500ms, total frequency characteristic; 0.1-200 Hz). We conducted 3D heart outline from electric current density calculated by magnetic field distribution. We also generated 3D functional images of the RT (activation recovery time) dispersion and spatial spectral distribution of a fibrillation wave. Increased fluctuation on RT dispersion map corresponded with space location of myocardial infarction. The mean frequency of 3D spectral map in persistent AFIB showed a higher value than that with restored a sinus rhythm (7.7 +/- 0.5 Hz vs. 6.5 +/- 0.7 Hz). We also demonstrated a fetus PVC. We concluded that 64-ch MCG can evaluate 3D spatial location of myocardial injury, 3D spectral map and characteristic frequency, and fetus arrhythmia. In future, further technical development in the fields of MCG measurement would be necessary for avoiding the used of unshielded room or liquid He.

Gene silencing by RNA interference in the koji mold Aspergillus oryzae.

We found the orthologous genes required for RNA interference (RNAi) in the Aspergillus oryzae genome database, and constructed a set of tools for gene silencing using RNAi in A. oryzae. This system utilizes compatible restriction enzyme sites so that only a single target gene fragment is required to create the hairpin RNA cassette. For ease of handling, we also separated the construction of the hairpin RNA cassette for the target gene from its subsequent introduction into the expression vector. Using the brlA gene as a target for RNAi, we detected decreased mRNA levels and a delayed conidiation phenotype in the transformants. Furthermore, even though A. oryzae possesses three copies of the alpha-amylase gene, a single copy of an alpha-amylase RNAi construct was sufficient to downregulate the mRNA levels and decrease the enzymatic activity to 10% of control levels. Gene silencing by RNAi should provide a powerful genetic tool for post-genomic studies of the industrially important fungus A. oryzae.

Aspergillus oryzae strains with a large deletion of the aflatoxin biosynthetic homologous gene cluster differentiated by chromosomal breakage.

Recently we divided Aspergillus oryzae RIB strains into group 1, having seven aflatoxin biosynthesis homologous genes (aflT, nor-1, aflR, norA, avnA, verB, and vbs), and group 2, having three homologues (avnA, verB, and vbs). Here, partial aflatoxin homologous gene cluster of RIB62 from group 2 was sequenced and compared with that of RIB40 from group 1. RIB62 showed a large deletion upstream of ver-1 with more than half of the aflatoxin homologous gene cluster missing including aflR, a positive transcriptional regulatory gene. Adjacent to the deletion of the aflatoxin homologous gene cluster, RIB62 has a unique sequence of about 8 kb and a telomere. Southern analysis of A. oryzae RIB strains with four kinds of probe derived from the unique sequence of RIB62 showed that all group 2 strains have identical hybridizing signals. Polymerase chain reaction with specific primer set designed to amplify the junction between ver-1 and the unique sequence of RIB62 resulted in the same size of DNA fragment only from group 2 strains. Based on these results, we developed a useful genetic tool that distinguishes A. oryzae group 2 strains from the other groups' strains and propose that it might have differentiated from the ancestral strains due to chromosomal breakage.

Molecular analysis of an inactive aflatoxin biosynthesis gene cluster in Aspergillus oryzae RIB strains.

To help assess the potential for aflatoxin production by Aspergillus oryzae, the structure of an aflatoxin biosynthesis gene homolog cluster in A. oryzae RIB 40 was analyzed. Although most genes in the corresponding cluster exhibited from 97 to 99% similarity to those of Aspergillus flavus, three genes shared 93% similarity or less. A 257-bp deletion in the aflT region, a frameshift mutation in norA, and a base pair substitution in verA were found in A. oryzae RIB 40. In the aflR promoter, two substitutions were found in one of the three putative AreA binding sites and in the FacB binding site. PCR primers were designed to amplify homologs of aflT, nor-1, aflR, norA, avnA, verB, and vbs and were used to detect these genes in 210 A. oryzae strains. Based on the PCR results, the A. oryzae RIB strains were classified into three groups, although most of them fell into two of the groups. Group 1, in which amplification of all seven genes was confirmed, contained 122 RIB strains (58.1% of examined strains), including RIB 40. Seventy-seven strains (36.7%) belonged to group 2, characterized by having only vbs, verB, and avnA in half of the cluster. Although slight expression of aflR was detected by reverse transcription-PCR in some group 1 strains, including RIB 40, other genes (avnA, vbs, verB, and omtA) related to aflatoxin production were not detected. aflR was not detected in group 2 strains by Southern analysis.