RESUMEN
Solar-driven evaporation is a promising technology for desalinating seawater and wastewater without mechanical or electrical energy. The approaches to obtaining fresh water with higher evaporation efficiency are essential to address the water-scarcity issue in remote sensing areas. Herein, we report a highly efficient solar evaporator derived from the nanocomposite of anatase TiO2/activated carbon (TiO2/AC), which was coated on washable cotton fabric using the dip-dry technique for solar water evaporation. The ultra-black fabric offers enhanced solar absorption (93.03%), hydrophilic water transport, and an efficient evaporation rate of 1.65 kg/m2h under 1 kW m-2 or one sun solar intensity. More importantly, the sideways water channels and centralized thermal insulation of the designed TiO2/AC solar evaporator accumulated photothermal heat at the liquid and air interface along with an enhanced surface temperature of 40.98 °C under one sun. The fabricated solar evaporator desalinated seawater (3.5 wt%) without affecting the evaporation rates, and the collected condensed water met the standard of drinking water set by the World Health Organization (WHO). This approach eventually enabled the engineering design groups to develop the technology pathways as well as optimum conditions for low-cost, scalable, efficient, and sustainable solar-driven steam generators to cope with global water scarcity.
RESUMEN
The enhancement of optical characteristics at optical frequencies deviates with the choice of the arrangement of core-shell nanoparticles and their environment. Likewise, the arrangements of core-shell nanoparticles in the air over a substrate or in liquid solution makes them unstable in the atmosphere. This article suggests designing a configuration of an active spherical coated nanoparticle antenna and its extended array in the presence of a passive dielectric, which is proposed to be extendable to construct larger arrays. The issue of instability in the core-shell nanoantenna array models is solved here by inserting the passive dielectric. In addition to this, the inclusion of a dielectric in the array model reports a different directivity behaviour than the conventional array models. We found at first that the combination model of the active coated nanoparticle and passive sphere at the resonant frequency can excite a stronger field with a rotated polarization direction and a propagation direction different from the incident plane-wave. Furthermore, the extended 2D array also rotates the polarization direction and propagation direction for the vertical incident plane-wave. The radiation beam operates strong multipoles in the 2D array plane at resonant frequency (behaving non-conventionally). Nevertheless, it forms a clear main beam in the incident direction when it deviates from the resonance frequency (behaving conventionally). The proposed array model may have possible applications in nano-amplifiers, nano-sensors and other integrated optics.
RESUMEN
This article reports the finding of the plasmonic induced polarization rotation and propagation rotation when the plane EM wave radiates the adjacent active coated nano particle and large dielectric sphere at resonant frequency. The results investigate that the incident electromagnetic planewave excites the TM21 mode in the large size dielectric sphere at first, which affects the TM11 mode field from the coated nano particle. Consequently, when the combined active coated nano particle and large dielectric sphere are in resonant, the main E-field polarization direction becomes parallel to the propagation direction of the original planewave and main beam of the pattern becomes omnidirectional i.e. both rotates by 90°. Furthermore, the polarization and propagation rotation angle varies with different size of the dielectric sphere. Likewise, the structure of dielectric sphere clamped by two active nanoparticles is also showing plasmonic induced polarization and propagation rotation along with TM11 mode from each coated nano particle (CNP) having 180° phase difference. In addition to this, the induced polarization rotation was also verified by the Electric Hertzian Dipole (EHD). The integration of this simpler geometry with other optical devices has possible applications in polarization manipulation, nano-sensors and detectors on nanoscale.
RESUMEN
Analysis consisting of numerical simulations along with lab experiments of interaction effects between key parameters on the electromagnetic force based on response surface methodology (RSM) has been also proposed to optimize the design of high-speed solenoid valve (HSV) and improve its performance. Numerical simulation model of HSV has been developed in Ansoft Maxwell environment and its accuracy has been validated through lab experiments. Effect of change of core structure, coil structure, armature structure, working air gap, and drive current on the electromagnetic force of HSV has been analyzed through simulation model and influence rules of various parameters on the electromagnetic force have been established. The response surface model of the electromagnetic force has been utilized to analyze the interaction effect between major parameters. It has been concluded that six interaction factors including working air gap with armature radius, drive current with armature thickness, coil turns with side pole radius, armature thickness with its radius, armature thickness with side pole radius, and armature radius with side pole radius have significant influence on the electromagnetic force. Optimal match values between coil turns and side pole radius; armature thickness and side pole radius; and armature radius and side pole radius have also been determined.
